Optimization and characterization of high velocity oxy-fuel sprayed coatings: Techniques, materials, and applications

Coatings

Volumn 1, Issue 1, 2011, Pages 17-52

  Oksa, Maria ^a   Turunen, Erja ^a   Suhonen, Tomi ^a   Varis, Tommi ^a   Hannula, Simo Pekka ^b  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b AALTO UNIVERSITY   (Finland)

Author keywords

Characterization; Coating; HVOF; Optimization; Standardization; Thermal spray

Indexed keywords

EID: 85063835932     PISSN: None     EISSN: 20796412     Source Type: Journal    
DOI: 10.3390/coatings1010017     Document Type: Article

References (87)

1. Cho, J.Y.; Zhang, S.H.; Cho, T.Y.; Yoon, J.H.; Joo, Y.K.; Hur, S.K. The processing optimization and property evaluations of HVOF Co-base alloy T800 coating. J. Mater. Sci. 2009, 44, 6348-6355
2. 20 ) Coatings. J. Therm. Spray Technol. 2010, 19, 392-408
3. Mostaghimi, J.; Chandra, S.; Ghafouri-Azar, R.; Dolatabadi, A. Modeling thermal spray coating processes: A powerful tool in design and optimization. Surf. Coat. Technol. 2003 163-164, 1-11
4. Dongmo, E.; Wenzelburger, M.; Gadow, M. Analysis and optimization of the HVOF process by combined experimental and numerical approaches. Surf. Coat. Technol. 2008, 202, 4470-4478
5. Bansal, P.; Shipway, P.H.; Leen, S.B. Residual stresses in high-velocity oxy-fuel thermally sprayed coatings-Modelling the effect of particle velocity and temperature during the spraying process. Acta Mater. 2007, 55, 5089-5101
6. Sampath, S.; Jiang, X.; Kulakarni, A.; Matejicek, J.; Gilmore, D.L.; Neiser, R.A. Development of process maps for plasma spray: Case study for molybdenum. Mater. Sci. Eng. A 2003, 348, 54-66
7. Turunen, E.; Varis, T.; Gustafsson, T.E.; Keskinen, J.; Fält, T.; Hannula, S.-P. Parameters optimization of HVOF sprayed nanostructured alumina and alumina-nickel composite coatings. Surf. Coat. Technol. 2006, 200, 4987-4994
8. Vaidya, A.; Srinivasan, V.; Streibl, T.; Friis, M.; Chi, W.; Sampath, S. Process maps for plasma spraying of yttria-stabilized zirconia: An integrated approach to design, optimization and reliability. Mater. Sci. Eng. A 2008, 497, 239-253
9. Zhang, W.; Sampath, S.A. Universal method for representation of in-flight particle characteristics in thermal spray processes. J. Therm. Spray Technol. 2009, 18, 23-34
10. Valarezo, A.; Choi, W.B.; Chi, W.; Gouldstone, A.; Sampath, S. Process control and characterization of NiCr coatings by HVOF-DJ2700 system: A process map approach. J. Therm. Spray Technol. 2010, 19, 852-865
11. Fauchais, P.; Vardelle, M. Sensors in spray processes. J. Therm. Spray Technol. 2010, 19, 668-694
12. Sampath, S.; Srinivasan, V.; Valarezo, A.; Vaidya, A.; Streibl, T. Sensing, control, and in situ measurement of coating properties: An integrated approach toward establishing process-property correlations. J. Therm. Spray Technol. 2009, 18, 243-255
13. Handbook of Thermal Spray Technology; Davis, J.R., Ed.; ASM International: Materials Park, OH, USA, 2004; pp. 338
14. Vaidya, A.; Streibl, T.; Li, L.; Sampath, S.; Kovarik, O.; Greenlaw, R. An integrated study of thermal spray process-structure-property correlations: A case study for plasma sprayed molybdenum coatings. Mater. Sci. Eng. A 2005, 403, 191-204
15. Turunen, E.; Varis, T.; Hannula, S.-P.; Vaidya, A.; Kulkarni, A.; Gutleber, J.; Sampath, S.; Herman, H. On the role of particle state and deposition procedure on mechanical, tribological and dielectric response of high velocity oxy-fuel sprayed alumina coatings. Mater. Sci. Eng. A 2006, 415, 1-11
16. Dwivedi, G.; Wentz, T.; Sampath, S.; Nakamura, T. Assessing process and coating reliability through monitoring of process and design relevant coating properties. J. Therm. Spray Technol. 2010, 19, 695-712
17. Hannula, S.-P.; Suhonen, T.; Varis, T.; Turunen, E. Challenges in processing and characterization of thermal sprayed coatings. In Proceedings of 'Product Property Prediction-P3' Conference, Dortmund, Germany, 12-13 April 2010; p. 12
18. Vaidya, A.; Bancke, G.; Sampath, S.; Herman, H. Influence of process variables on the plasma sprayed coatings-An integrated study. In Proceedings of International Thermal Spray Conference, Singapore, Singapore, 28-30 May 2001; pp. 1345-1349
19. Matejicek, J.; Sampath, S. In-situ measurements of residual stresses and elastic moduli in thermal sprayed coatings: Part 1: Apparatus and analysis. Acta Mater. 2003, 51, 863-872
20. Fisher-Cripps, A.C. Nanoindentation, 2nd edition, Mechanical Engineering Series; Springer: New York, NY, USA, 2004, p.263
21. EN ISO 4516:2002. Metallic and other inorganic coatings. In Vickers and Knoop Microhardness Tests?; European Committee for Standardization: City, Country 2002
22. Suhonen, T.; Varis, T.; Turunen, E.; Liu, X.; Yanling, G.; Söderberg, O.; Hannula, S.-P. Modelling the effect of microstructure on mechanical properties of HVOF sprayed WC-CoCr coatings. In Proceedings of WMRIF Workshop for Young Scientists, Tsukuba, Japan, 22-25 July 2008
23. ASTM E 1876-09. Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration. American Society for Testing and Materials: West Conshohocken, PA, USA, 2009
24. ENV 843-2:1997. Advanced Technical Ceramics-Monolithic Ceramics, Mechanical Properties at Room Temperature-Part 2: Determination of Elastic Moduli. European Committee for Standardization: City, Country1997
25. Oliver, W.C.; Pharr, G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 1992, 7, 1564-1583
26. Griffith, A.A. The phenomena of rupture and flow in solids. Phil. Trans. Roy. Soc. London A 1920, 221, 163-198 (This article has been republished with additional commentary in Trans. ASM 61, 871, 1968)
27. JIS R 1688:2005. Testing Method for Fracture Toughness of Porous Fine Ceramics; Japanese Standards Association: Tokyo, Japan, 2005
28. Deshpande, S.; Kulkarni, A.; Sampath, S.; Herman, H. Application of image analysis for characterization of porosity in thermal spray coatings and correlation with small angle neutron scattering. Surf. Coat. Technol. 2004, 187, 6-16
29. Fowler, D.B.; Riggs, W.; Russ, J.C. Inspecting thermal sprayed coatings. Adv. Mater. Proc. 1990, 11, 41-52
30. Komatsu, M.; Kuroda, S.; Sodeoka, S.; Sakoda, N.; Lee, S.W. Porosity measurement of thermal sprayed ceramic coatings by SEM cross sectional photography and image analysis-Round Robin test for ISO standardization. In Proceedings of Asian Thermal Spray Conference, Xi'an, China, 22-24 October 2009
31. Mailhot, K.; Gitzhofer, F.; Boulos, M.I. Absolute coating porosity measurement using image analysis. In Proceedings of the 15th ITSC, Nice, France, 1998; Volume 1, pp. 917-922
32. Final Report. Aircraft Accident Investigation of Copterline Oy, Sikorsky S-76C+ in Tallinn Bay, Estonia on 10th August 2005. Ministry of Economic Affairs and Communications, Estonia. 6 August 2008. Retrieved 11 August 2008
33. EN 582:1993. Determination of Tensile Adhesive Strength; European Committee for Standardization: City, country1993
34. Marot, G.; Lesage, J.; Démarécaux, P.H.; Hadad, M.; Siegmann, St.; Staia, M.H. Interfacial indentation and shear tests to determine the adhesion of thermal spray coatings. Surf. Coat. Technol. 2006, 201, 2080-2085
35. Noyan, I.C.; Cohen, J.B. Residual Stress-Measurement by Diffraction and Interpretation; Springer-Verlag: New York, NY, USA, 1987; p. 626
36. Pina, J.; Dias, A.; Lebrun, J.L. Mechanical stiffness of thermally sprayed coatings and elastic constants for stress evaluation by X-ray diffraction. Mater. Sci. Eng. A 1999, 267, 130-144
37. Matejicek, J.; Sampath, S. In-situ measurements of residual stresses and elastic moduli in thermal sprayed coatings: Part 1: Apparatus and analysis, Acta Mater. 2003, 51, 863-872
38. ASTM G75-95. Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number); American Society for Testing and Materials: West Conshohocken, PA, USA, 1995
39. Verdon, C.; Karimi, A.; Martin, J.-L. A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: Microstructures. Mater. Sci. Eng. A 1998, 246, 11-24
40. Stewart, D.A.; Shipway, P.H.; McCartney, D.G. Influence of heat treatment on the abrasive wear behavior of HVOF sprayed WC-Co coatings. Surf. Coat. Technol. 1998, 105, 13-24
41. 2 -NiCr coatings by plasma and HVOF spraying. Wear 1997, 202, 208-214
42. Jones, M.; Horlock, A.J.; Shipway, P.H.; McCartney D.G.; Wood, J.V. A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide and titanium boride-based cermet coatings, Wear 2001, 251, 1009-1016
43. Horlock, A.J.; McCartney, D.G.; Shipway, P.H.; Wood, J.V. Thermally sprayed Ni(Cr)-TiB2 coatings using powder produced by self-propagation high temperature synthesis: Microstructure and abrasive wear behaviour, Mater. Sci. Eng. A 2002, 336, 88-98
44. Wang, B.-Q. The dependence of erosion-Corrosion wastage on carbide/metal binder proportion for HVOF carbide-metal cermet coatings, Wear 1996, 196,141-146
45. Hawthorne, H.M.; Arsenault, B.; Immarigeon, J.P.; Legoux, J.G.; Parameswaran, V.R. Comparison of slurry and dry erosion behaviour of some HVOF thermal sprayed coatings, Wear 1999, 225-229, 825-834
46. Mann, B.S.; Arya, V. Abrasive and erosive wear characteristics of plasma nitriding and HVOF coatings: Their application in hydro turbines. Wear 2001, 249, 354-360
47. Berget, J.; Rogne, T.; Bardal, E. Erosion-corrosion properties of different WC-Co-Cr coatings deposited by the HVOF process-Influence of metallic matrix composition and spray powder size distribution. Surf. Coat. Technol. 2007, 201, 7619-7625
48. Zhou, Z.; Wang, L.; Wang, F.C.; Zhang, H.F.; Liu, Y.B.; Xu, S.H. Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying, Surf. Coat. Technol. 2009, 204, 563-570
49. Lima, R.S.; Marple, B.R. From APS to HVOF spraying of conventional and nanostructured titania feedstock powders: A study on the enhancement of the mechanical properties, Surf. Coat. Technol. 2006, 200, 3428-3437
50. Turunen, E.; Varis, T.; Gustafsson, T.; Keskinen, J.; Lintunen, P.; Fält, T.; Nowak, R.; Hannula, S.-P. Process optimization for nanostructured HVOF-sprayed Al2O3-based ceramic coatings, Key. Eng. Mater. 2006, 317-318, 545-554
51. Turunen, E.; Varis, T.; Keskinen, J.; Fält, T.; Hannula, S.-P. Improved mechanical properties by nanoreinforced ceramic composite HVOF coatings, Adv. Sci. Technol. 2006, 45, 1240-1245
52. Turunen, E.; Hirvonen, A.; Varis, T.; Fält, T.; Hannula, S.-P.; Sekino, T.; Niihara K. Application of HVOF techniques for spraying of ceramic coatings. Adv. Technol. Mater. 2007, 9, 63-68
53. Bolelli, G.; Lusvarghi, L.; Manfredini, T.; Mantini, P.F.; Polini, R.; Turunen, E.; Varis, T.; Hannula, S.-P. Comparison between plasma-and HVOF-sprayed ceramic coatings. Part I: Microstructure and mechanical properties. Int. J. Surf. Sci. Eng. 2007, 1, 38-61
54. Brandl, W.; Toma, D.; Krüger, J.; Grabke, H.J.; Matthäus, G. The oxidation behaviour of HVOF thermal-sprayed MCrAlY coatings. Surf. Coat. Technol. 1997, 93-95, 21-26
55. Gil, L.; Staia, M.H. Influence of HVOF parameters on the corrosion resistance of NiWCrBSi coatings. Thin Solid Films 2002, 420-421, 446-454
56. Zhao, W.-M.; Wang, Y.; Dong, L.-X.; Wu, K.-Y.; Xue, J. Corrosion mechanism of NiCrBSi coatings deposited by HVOF. Surf. Coat. Technol. 2005, 190, 293-298
57. Kawakita, J.; Kuroda, S.; Kodama, T. Evaluation of through-porosity of HVOF sprayed coating. Surf. Coat. Technol. 2003, 166, 17-23
58. Chidambarama, D.; Clayton, C.; Dorfman, M. Evaluation of the electrochemical behavior of HVOF-sprayed alloy coatings. Surf. Coat. Technol. 2004, 176, 307-317
59. Chidambarama, D.; Claytona, C.R.; Dorfman, M.R. Evaluation of the electrochemical behavior of HVOF-sprayed alloy coatings-II. Surf. Coat. Technol. 2005, 192, 278-283
60. Rastegar, F.; Richardson, D.E. Alternative to chrome: HVOF cermet coatings for high horse power diesel engines. Surf. Coat. Technol. 1997, 90, 156-163
61. Nascimento, M.P.; Souza, R.C.; Miguel, I.M.; Pigatin, W.L.; Voorwald, H.J.C. Effects of tungsten carbide thermal spray coating by HP/HVOF and hard chromium electroplating on AISI 4340 high strength steel. Surf. Coat. Technol. 2001, 138, 113-124
62. Sahraoui, T.; Fenineche, N.-E.; Montavon, G.; Coddet, C. Alternative to chromium: Characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty), J. Mater. Processing Technol. 2004, 152, 43-55
63. 2 -NiCr coatings obtained by HVOF and hard chromium coatings. Corros. Sci. 2006, 48, 2998-3001?
64. Bolelli, G.; Cannillo, V.; Lusvarghi, L.; Ricco, S. Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings. Surf. Coat. Technol. 2006, 200, 2995-3009
65. Bolelli, G.; Lusvarghi, L.; Manfredini, T.; Mantini, P.F.; Turunen, E.; Varis, T.; Hannula, S.-P. Comparison between plasma-and HVOF-sprayed ceramic coatings. Part II: Tribological behaviour. Int. J. Surf. Sci. Engin. 2007, 1, 62-79
66. 2 -NiCr coatings obtained by HVOF and hard chromium coatings. Corros. Sci. 2006, 48, 2998-3013
67. Sidhu, T.S.; Prakash, S.; Agrawal, R.D. Evaluation of hot corrosion resistance of HVOF coatings on a Ni-based superalloy in molten salt environment, Mater. Sci. Eng. A 2006, 430, 64-78
68. Sidhu, H.S.; Sidhu, B.S.; Prakash, S. The role of HVOF coatings in improving hot corrosion resistance of ASTM-SA210 GrA1 steel in the presence of Na2SO4-V2O5 salt deposits. Surf. Coat. Technol. 2006, 200, 5386-5394
69. Stewart, D.A.; Shipway, P.H.; McCartney, D.G. Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC-Co coatings. Wear 1999, 225-229, 789-798
70. Berger, L.M.; Woydt, M.; Saaro, S. Comparison of self-mated hardmetal coatings under dry sliding conditions up to 600 °C. Wear 2009, 266, 406-416
71. Ramesh, M.R.; Prakash, S.; Nath, S.K.; Sapra, P.K.; Venkataraman, B. Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings. Wear 2010, 269, 197-205
72. Oksa, M.; Kärki, J.; Varis, T.; Turunen, E. Corrosion resistance of HVOF coatings in a biofuel boiler plant. In Proceedings of EUROCORR 2005 The European Corrosion Congress, Lissabon, Country,4-8 September 2005; p. 9
73. Sidhu, T.S.; Prakash, S.; Agrawal, R.D. Studies of the metallurgical and mechanical properties of high velocity oxy-fuel sprayed stellite-6 coatings on Ni-and Fe-based superalloys. Surf. Coat. Technol. 2006, 201, 273-281
74. Kawahara, Y. Application of high temperature corrosion-resistant materials and coatings under severe corrosive environment in waste-to-energy boilers. J. Therm. Spray Technol. 2007, 16, 202-213
75. Lima, C.R.C.; Guilemany, J.M. Adhesion improvements of thermal barrier coatings with HVOF thermally sprayed bond coats. Surf. Coat. Technol. 2007, 201, 4694-4701
76. Gibbons, G.J.; Hansell, R.G. Thermal-sprayed coatings on aluminium for mould tool protection and upgrade. J. Mater. Process. Technol. 2008, 204, 184-191
77. Matthews, S.; James, B. Review of thermal spray coating applications in the steel industry: Part 2-Zinc pot hardware in the continuous galvanizing line. J. Therm. Spray Technol. 2010, 19, 1277-1286
78. Bolelli, G.; Lusvarghi, L.; Barletta, M. HVOF-sprayed WC-CoCr coatings on Al alloy: Effect of the coating thickness on the tribological properties. Wear 2009, 267, 944-953
79. Hamashima, K. Application of new boride cermet coating to forming of glass sheets. J. Therm. Spray Technol. 2007, 16, 32-33
80. 2 -NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance. Surf. Coat. Technol. 2008, 202, 1405-1417
81. Fedrizzi, L.; Rossi, S.; Cristel, R.; Bonora, P.L. Corrosion and wear behaviour of HVOF cermet coatings used to replace hard chromium. Electrochim. Acta 2004, 49, 2803-2814
82. Picas, J.A.; Fornand, A.; Matthäus, G. HVOF coatings as an alternative to hard chrome for pistons and valves. Wear 2006, 261, 477-484
83. Bonora, R.G.; Voorwald, H.J.C.; Cioffi, M.O.H.; Junior, G.S.; Santos, L.F.V. Fatigue in AISI 4340 steel thermal spray coating by HVOF for aeronautic application. Procedia Engin. 2010, 2, 1617-1623
84. Cherigui, M.; Fenineche, N.E.; Ji, G.; Grosdidier, T.; Coddet C. Microstructure and magnetic properties of Fe-Si-based coatings produced by HVOF thermal spraying process. J. Alloys Compd. 2007, 427, 281-290
85. Gadow, R.; Killinger, A.; Stiegler, N. Hydroxyapatite coatings for biomedical applications deposited by different thermal spray techniques. Surf. Coat. Technol. 2010, 205, 1157-1164
86. Lima, R.S.; Khor, K.A.; Li, H.; Cheang, P.; Marple, B.R. HVOF spraying of nanostructured hydroxyapatite for biomedical applications. Mater. Sci. Eng. A 2005, 396, 181-187
87. Gaona, M.; Lima, R.S.; Marple, B.R. Influence of particle temperature and velocity on the microstructure and mechanical behaviour of high velocity oxy-fuel (HVOF)-sprayed nanostructured titania coatings. J. Mater. Process. Technol. 2008, 198, 426-435