Influence of heat treatment on the abrasive wear behaviour of HVOF sprayed WC-Co coatings

Surface and Coatings Technology

Volumn 105, Issue 1-2, 1998, Pages 13-24

  Stewart, D A ^a   Shipway, P H ^a   McCartney, D G ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BINDERS; COBALT; DECARBURIZATION; DISSOLUTION; MICROSTRUCTURE; PROTECTIVE COATINGS; RESIDUAL STRESSES; STEEL; THERMAL EFFECTS; THERMAL EXPANSION; TUNGSTEN CARBIDE; WEAR RESISTANCE;

HIGH VELOCITY OXYFUEL (HVOF) SPRAYING;

SPRAYED COATINGS;

HEAT TREATMENT; TUNGSTEN CARBIDE-COBALT ALLOY; WEAR;

EID: 0032486056     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0257-8972(98)00444-7     Document Type: Article

References (34)

1. Harvey D. The tough truth - wear resistant coatings using high velocity oxyfuel. Industrial Lubrication Tribol. 48:1996;11-16.
2. M.R. Dorfman, B.A. Kushner, J. Nerz, A.J. Rotolico, A technical assessment of high velocity oxygen-fuel versus high energy plasma tungsten carbide-cobalt coatings for wear resistance, in: Proceedings of the Twelfth International Conference on Thermal Spraying, The Welding Institute, Abington Hall, Abington, Cambridge, CB1 GAL, 1989, pp. 291-302.
3. T.P. Slavin, J. Nerz, Material characteristics and performance of WC-Co wear resistant coatings, in: Thermal Spray Research and Applications, Proceedings of the Third National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1990, pp. 159-164.
4. Karimi A., Verdon Ch., Martin J.L., Schmid R.K. Slurry erosion behaviour of thermally sprayed WC-M coatings. Wear. 186(7):1995;480-486.
5. Barbezat G., Nicoll A.R., Sickinger A. Abrasion, erosion and scuffing resistance of carbide and oxide ceramic thermal spray coatings for different applications. Wear. 162(4):1993;529-537.
6. Bjordal M., Bardal E., Rogne T., Eggen T.G. Combined erosion and corrosion of thermal sprayed WC and CrC coatings. Surf. Coat. Technol. 70:1993;215-220.
7. Wang B.Q. Erosion-corrosion of coatings by biomass boiler fly ash. Wear. 188:1995;40-48.
8. X. Provot, H. Burlet, M. Vardavoulias, M. Jeandin, D. Manesse, C. Richard, J. Lu, Comparative studies of microstructures, residual stress distributions and wear properties for HVOF and APS WC-Co coatings of Ti6Al4V, in: Proceedings of the 1993 National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1993, pp. 159-165.
9. Bahadur S., Yang C. Friction and wear behaviour of tungsten and titanium carbide coatings. Wear. 196:1996;156-163.
10. Kennedy D.M., Helali M., Hashmi M.S.J. Dynamic abrasion resistance of coatings applied to engineering materials. Surf. Coat. Technol. 68 69:1994;477-481.
11. Coulson W., Leheup E.R., Marsh M.G. Reciprocating wear of WC-17Co coatings in aqueous environments. Trans. Inst. Metal Finishing. 73:1995;7-11.
12. K. Niemi, P. Vuoristo, T. Mantyla, G. Barbezat, A.R. Nicoll, Abrasion wear resistance of carbide coatings deposited by plasma and high velocity combustion processes, in: Proceedings of the International Thermal Spray Conference and Exposition, ASM International, Materials Park, OH, USA, 1992, pp. 685-689.
13. T. Kraak, W. Herlaar, J. Wolke, K. de Groot, E.A. Hyduk Jr, Influence of different gases on the mechanical and physical properties of HVOF sprayed tungsten carbide cobalt, in: Proceedings of the International Thermal Spray Conference and Exposition, ASM International, Materials Park, OH, USA, 1992, pp. 153-158.
14. G.K. Creffield, M.A. Cole, G.R. White, The effect of gas parameters on HVOF coatings, in: Advances in Thermal Spray Science and Technology, Proceedings of the Eighth National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1995, pp. 291-296.
15. Li C.J., Ohmori A., Harada Y. Effect of powder structure on the structure of thermally sprayed WC-Co coatings. J. Mater. Sci. 31:1996;785-794.
16. W.J. Jarosinski, M.F. Gruninger, C.H. Londry, Characterisation of tungsten carbide cobalt powders and HVOF coatings, in: Proceedings of the 1993 National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1993, pp. 153-157.
17. R. Knight, R.W. Smith, Residual stress in thermally sprayed coatings, in: Proceedings of the 1993 National Thermal Spray Conference, 1993, ASM International, Materials Park, OH, USA, pp. 607-612.
18. D. Stöver, D.A. Jäger, H.G. Schütz, Residual stresses in low pressure plasma sprayed chromia coatings, in: Proceedings of the Fourth National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1991, pp. 215-219.
19. V. Dolhof, J. Musil, M. Cepera, J. Zeman, Stress analysis of thermal sprayed coatings using a semi-destructive hole-drilling method, in: Proceedings of the Eighth National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1995, pp. 445-449.
20. D.J. Greving, E.F. Rybicki, J.R. Shadley, Residual stress evaluations of thermal spray coatings by a modified layer removal method, in: Proceedings of the Seventh National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1994, pp. 647-653.
21. Y.C. Kim, T. Terasaki, T.H. North, A method of measuring the through thickness residual stress in a thermally sprayed coating, in: Proceedings of the Fourth National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1991, pp. 221-227.
22. Tsui Y.C., Clyne T.W. An analytical model for predicting residual stresses in progressively deposited coatings. Part 1: Planar geometry. Thin Solid Films. 306:1997;23-33.
23. Tsui Y.C., Clyne T.W. An analytical model for predicting residual stresses in progressively deposited coatings. Part 2: Cylindrical geometry. Thin Solid Films. 306:1997;34-51.
24. R.J. Thorpe, M.L. Thorpe, High pressure HVOF - an update, in: Proceedings of the 1993 National Thermal Spray Conference, 1993, pp. 199-203.
25. H. Kreye, R. Schwetzke, S. Zimmerman, High velocity oxy-fuel flame spraying - process and coating characterisation, in: C.C. Berndt (Ed), Thermal Spray: Practical Solutions for Engineering Problems, ASM International, Metals Park, OH, 1996, pp. 451-456.
26. Nerz J., Kushner B., Rotolico A. Microstructural evaluation of tungsten carbide-cobalt coatings. J. Thermal Spray Technol. 1:1992;147-152.
27. Li C.J., Ohmori A., Harada Y. Formation of an amorphous phase in thermally sprayed WC-Co. J. Thermal Spray Technol. 5:1996;69-73.
28. Clyne T.W. Residual stresses in surface coatings and their effects on interfacial debonding. Key Eng. Mater. 116 117:1996;307-330.
29. Brandt O.C. Mechanical properties of HVOF coatings. J. Thermal Spray Technol. 4:1995;147-152.
30. M.F. Ashby, D.R.H. Jones, Engineering Materials, vol. 2, Pergamon Press, Oxford, 1986.
31. O.C. Brandt, Measuring of residual stresses in thermal spray coatings, in: Proceedings of the Eighth National Thermal Spray Conference, ASM International, Materials Park, OH, USA, 1995, pp. 451-455.
32. Kuroda S., Clyne T.W. The quenching stress in thermally sprayed coatings. Thin Solid Films. 200:1991;49-66.
33. Okada R., Yamada M. Effect of heat treatment on hardness and wear resistance of WC-NiCr sprayed coatings. J. Jpn. Inst. Metals. 58:1994;763-767.
34. F.H. Vitovec, Stress and load dependence of microindentation hardness, in: P.J. Blau and B.R. Lawn (Eds.), Microindentation Techniques in Materials Science and Engineering, ASTM STP 889, ASTM, Philadelphia, PA, 1986, pp. 175-185.