Micromechatronics: Modeling, analysis, and design with MATLAB®: Second edition

Micromechatronics: Modeling, Analysis, and Design with MATLAB®: Second Edition

Volumn , Issue , 2016, Pages 1-906

  Giurgiutiu, Victor ^a   Lyshevski, Sergey Edward ^b  

^a UNIVERSITY OF SOUTH CAROLINA   (United States)

^b ROCHESTER INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENERGY CONVERSION; HARDWARE; MATLAB; MICROCONTROLLERS; PROBLEM SOLVING;

DESIGN AND ANALYSIS; ELECTROMECHANICAL SYSTEMS; ENGINEERING SCIENCE; HIGH PERFORMANCE SYSTEMS; MECHATRONIC SYSTEMS; PROBLEM SOLVING SKILLS; SOFTWARE AND HARDWARES; SOLID-STATE ACTUATION;

STRUCTURAL HEALTH MONITORING;

EID: 85051565155     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (165)

1. Auslander, D. M. and Kempf, C. J., Mechatronics: Mechanical System Interfacing, Prentice Hall, Upper Saddle River, NJ, 1996.
2. Bolton, W., Mechatronics: Electronic Control Systems in Mechanical Engineering, Addison Wesley Longman Publishing, New York, 1999.
3. Bradley, D. A., Dawson, D., Burd, N. C., and Loader, A. J., Mechatronics, Chapman and Hall, New York, 1996.
4. Fraser, C. and Milne, J., Electro-Mechanical Engineering, IEEE Press, New York, 1994.
5. Histand, M. B. and Alciatore, D. G., Introduction to Mechatronics and Measurement Systems, WCB McGraw-Hill, New York, 1999.
6. Kamm, J. L., Understanding Electro-Mechanical Engineering: An Introduction to Mechatronics, IEEE Press, New York, 1996.
7. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
8. Shetty, D. and Kolk, R. A., Mechatronics System Design, PWS Publishing Company, New York, 1997.
9. Chapman, S. J., Electric Machinery Fundamentals, McGraw-Hill, New York, 1999.
10. Fitzgerald, A. E., Kingsley, C., and Umans, S. D., Electric Machinery, McGraw-Hill, New York, 1990.
11. Krause, P. C. and Wasynczuk, O., Electromechanical Motion Devices, McGraw-Hill, New York, 1989.
12. Krause, P. C., Wasynczuk, O., and Sudhoff, S. D., Analysis of Electric Machinery, IEEE Press, New York, 1995.
13. Leonhard, W., Control of Electrical Drives, Springer, Berlin, 1996.
14. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
15. Slemon, G. R., Electric Machines and Drives, Addison-Wesley Publishing Company, Reading, MA, 1992.
16. White, D. C. and Woodson, H. H., Electromechanical Energy Conversion, Wiley, New York, 1959.
17. Lyshevski, S. E., Engineering and Scientific Computations Using MATLAB1, Wiley, Hoboken, NJ, 2003.
18. MATLAB R2006b, CD-ROM, MathWorks, Inc., Natick, MA, 2007.
19. Fitzgerald, A. E., Kingsley, C., and Umans, S. D., Electric Machinery, McGraw-Hill, New York, 1990.
20. Krause, P. C. and Wasynczuk, O., Electromechanical Motion Devices, McGraw-Hill, New York, 1989.
21. Krause, P. C., Wasynczuk, O., and Sudhoff, S. D., Analysis of Electric Machinery, IEEE Press, New York, 1995.
22. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
23. Lyshevski, S. E., Electromechanical Systems and Devices, CRC Press, Boca Raton, FL, 2007.
24. White, D. C. and Woodson, H. H., Electromechanical Energy Conversion, Wiley, New York, 1959.
25. Chapman, S. J., Electric Machinery Fundamentals, McGraw-Hill, New York, 1999.
26. Fitzgerald, A. E., Kingsley, C., and Umans, S. D., Electric Machinery, McGraw-Hill, New York, 1990.
27. Krause, P. C. and Wasynczuk, O., Electromechanical Motion Devices, McGraw-Hill, New York, 1989.
28. Krause, P. C., Wasynczuk, O., and Sudhoff, S. D., Analysis of Electric Machinery, IEEE Press, New York, 1995.
29. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
30. Lyshevski, S. E., Electromechanical Systems and Devices, CRC Press, Boca Raton, FL, 2008.
31. Slemon, G. R., Electric Machines and Drives, Addison-Wesley Publishing Company, Reading, MA, 1992.
32. White, D. C. and Woodson, H. H., Electromechanical Energy Conversion, Wiley, New York, 1959.
33. Fitzgerald, A. E., Kingsley, C., and Umans, S. D., Electric Machinery, McGraw-Hill, New York, 1990.
34. Krause, P. C. and Wasynczuk, O., Electromechanical Motion Devices, McGraw-Hill, New York, 1989.
35. Krause, P. C., Wasynczuk, O., and Sudhoff, S. D., Analysis of Electric Machinery, IEEE Press, New York, 1995.
36. Leonhard, W., Control of Electrical Drives, Springer, Berlin, 1996.
37. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
38. Lyshevski, S. E., Electromechanical Systems and Devices, CRC Press, Boca Raton, FL, 2008.
39. Lyshevski, S. E., Engineering and Scientific Computations Using MATLAB1, Wiley-Interscience, Hoboken, NJ, 2003.
40. Chapman, S. J., Electric Machinery Fundamentals, McGraw-Hill, New York, 1999.
41. Krause, P. C. and Wasynczuk, O., Electromechanical Motion Devices, McGraw-Hill, New York, 1989.
42. Krause, P. C., Wasynczuk, O., and Sudhoff, S. D., Analysis of Electric Machinery, IEEE Press, New York, 1995.
43. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
44. Lyshevski, S. E., Electromechanical Systems and Devices, CRC Press, Boca Raton, FL, 2008.
45. Slemon, G. R., Electric Machines and Drives, Addison-Wesley Publishing Company, Reading, MA, 1992.
46. Sedra, A. S. and Smith, K. C., Microelectronic Circuits, Oxford University Press, New York, 1997.
47. Lyshevski, S. E., Electromechanical Systems, Electric Machines, and Applied Mechatronics, CRC Press, Boca Raton, FL, 1999.
48. Hart, D. W., Introduction to Power Electronics, Prentice Hall, Upper Saddle River, NJ, 1997.
49. Kassakian, J. G., Schlecht, M. F., and Verghese, G. C., Principles of Power Electronics, Addison- Wesley Publishing Company, Reading, MA, 1991.
50. Mohan, N., Undeland, T. M., and Robbins, W. P., Power Electronics: Converters, Applications, and Design, John Wiley and Sons, New York, 1995.
51. Kuo, B. C., Automatic Control Systems, Prentice Hall, Englewood Cliffs, NJ, 1995.
52. Lyshevski, S. E., Control Systems Theory with Engineering Applications, Birkhauser, Boston, MA, 2000.
53. Ogata, K., Discrete-Time Control Systems, Prentice-Hall, Upper Saddle River, NJ, 1995.
54. Ogata, K., Modern Control Engineering, Prentice-Hall, Upper Saddle River, NJ, 1997.
55. Lyshevski, S. E., Electromechanical Systems and Devices, CRC Press, Boca Raton, FL, 2008.
56. ANSI=IEEE Std. 176, IEEE Standard on Piezoelectricity, The Institute of Electrical and Electronics Engineers, Inc., New York, 1987.
57. Engdahl, G., Handbook of Giant Magnetostrictive Materials, Academic Press, San Diego, CA, 2000.
58. Flatau, A. B., Structural Magnetostrictive Alloys-ONR MURI, 2006, http:==www.aerosmart.umd. edu=MURI=index.html
59. Ikeda, T., Fundamentals of Piezoelectricity, Oxford University Press, Oxford, U.K, 2006.
60. Janocha, H., Adaptronics and Smart Structures, Springer Verlag, Berlin, 1999.
61. Knowles, J. K., Linear Vector Spaces and Cartesian Tensors, Oxford University Press, Inc., New York, September 1997.
62. Lachisserie, Etienne du Tremolet de, Magnetostriction-Theory and Applications, CRC Press, London, 1993.
63. Lines, M. E. and Glass, A. M., Principles and Applications of Ferroelectrics and Related Materials, Clarendon Press, Oxford, 2001.
64. MIL-STD-1376B (SH) Military Standard Piezoelectric Ceramic Materials and Measurements Guidelines for Sonar Transducers, Defense Quality and Standardization Office, Falls Church, VA, 24 February 1995.
65. Mitsui, T. and Nomura, S., Ferroelectrics and Related Substances, Landolt-Bornstein Series, Group III, Vol. 16, Springer-Verlag, Berlin, 1981.
66. Park, S-.E. and Shrout, T. R., Ultra high strain and piezoelectric behavior in relaxor ferroelectric single crystals, Journal of Applied Physics, 82, 4, 1804-1811, 1997.
67. Taylor, G. W., Gagnepain, J. J., Meeker, T. R., Nakamura, T., and Shuvalov, L. A., Piezoelectricity, Gordon and Breach Science Publishers, New York, 1985.
68. Uchino, K., Piezoelectric Actuators and Ultrasonic Motors, Kluwer Academic Publishers, Morwell, MA, 1997.
69. APC International Ltd and American Piezo Ceramics, Inc., Mackeyville, PA, email APCSales@aol. com., Web www.americanpiezo.com
70. Burleigh Instruments, Inc., Burleigh Park, Fishers, New York.
71. EDO Corporation, Salt Lake City, UT, http:==www.nycedo.com=edocorp=pageba5_edoecp.htm
72. Etrema Products, Inc., Ames, IA, http:==etrema-usa.com
73. Kinetic Ceramics, Inc., Hayward, CA, http:==www.kineticceramics.com=contact_us=contact_us.htm
74. Measurement Specialties, Inc., Wayne, PA, sensors@msiusa.com, http:==www.msiusa.com
75. Micromega Dynamics, SA, Angleur, Belgium, e-mail info@micromega-dynamics.com, http:==www.micromega-dynamics.com=profile.htm
76. Piezo Kinetics, Inc., Bellefonte, PA, http:==www.piezo-kinetics.com=
77. Piezo Systems, Inc., Cambridge, MA, http:==www.piezo.com=
78. Polytec PI, Inc., Costa Mesa, CA, http:==www.polytechpi.com=
79. Tokin America, Inc., Union City, CA, http:==www.nec-tokinamerica.com=products.html
80. TRS Ceramics Inc., State College, PA, http:==www.trsceramics.com
81. Anon, IEEE Standard on Piezoelectricity, ANSI=IEEE Std. 176-1987, IEEE, NY, 1987.
82. Bank, R., Shape Memory Effects in Alloys, Plenum, New York, 1975, p. 537, 1975.
83. Cory, J. S., Nitinol thermodynamic state surfaces J. Energy 2, No. 5, 1978.
84. Duerig, T. W., Melton, K. N., Stockel, D., and Wayman, C. M., Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann, London, 1990.
85. Furuya, Y., Watanabe, T., Hagood, N. W., Kimura, H., and Tani, J., Giant magnetostriction of ferromagnetic shape memory Fe-Pd Alloy produced by electromagnetic nozzleless melt-spinning method, 9th International Conference on Adaptive Structures and Technologies, Boston, MA, October 14-16, 1998, Technomics Publishing Company, Lancaster, PA, 1998.
86. Giurgiutiu, V., Active-materials induced-strain actuation for aeroelastic vibration control, Shock and Vibration Dig., 32(5), 355-368, September 2000.
87. Giurgiutiu, V. and Pomirleanu, R., Energy-Based Comparison of Solid-State Actuators, University of South Carolina, Department of Mechanical Engineering, Laboratory for Active Materials and Smart Structures, Report # USC-ME-LAMSS-2001-101, 2001.
88. Liang, C. and Rogers, C. A., A one-dimensional thermomechanical constitutive relation of shape memory materials, J. Intelligent Mater. Syst. Struct., 1(2), 207-234, 1990.
89. Lin, P. H., Tobushi, H., Tanaka, K., Hattori, T., and Makita, M., Pseudoelastic behavior of TiNi shape memory alloy subjected to strain variations, J. Intelligent Mater. Syst. Struct., 5, 694-701, September 1994.
90. Muller, I., A model for a body with shape memory, Arch. Ration. Mech. Anal. 70, 61-77, 1979.
91. Murray, S. J., Allen, S. M., O'Handley, R. C., and Lograsso, T. A., Magnetomechanical performance and mechanical properties of Ni-Mn-Ga ferromagnetic shape memory alloys, Smart Structures and Materials 2000, SPIE Proc., vol. 3992, pp. 387-395, 2000.
92. Rosen, C. Z., Hiremath, B. V., and Newnham, R., (Eds.) Key Papers in Physics: Piezoelectricity, American Institute of Physics, College Park, MD, 1992.
93. Tanaka, K. and Nagaki, S., A thermomechanical description of materials with internal variables in the process of phase transformation, Ing. Arch., 51, 287-299, 1982.
94. Tanaka, K. and Iwasaki, R., A phenomenological theory of transformation superplasticity, Eng. Fracture Mech., 21(4), 709-720, 1985.
95. APC International Ltd. and American Piezo Ceramics, Inc., Duck Run, Mackeyville, PA, APCSales@aol.com., www.americanpiezo.com
96. Burleigh Instruments, Inc., Burleigh Park, Fishers, New York 14453
97. EDO Corporation, Salt Lake City, Utah, http:==www.nycedo.com=edocorp=pageba5_edoecp.htm
98. Etrema Products, Inc., Ames, Iowa, http:==etrema-usa.com
99. Kinetic Ceramics, Inc., Hayward, CA, http:==www.kineticceramics.com=contact_us=contact_us.htm
100. Measurement Specialties, Inc., Sensor Products Division, Wayne, PA, http:==www.msiusa.com
101. Micromega Dynamics, SA, Angleur, Belgium, http:==www.micromega-dynamics.com=profile.htm
102. Piezo Kinetics, Inc., Bellefonte, PA, http:==www.piezo-kinetics.com
103. Piezo Systems, Inc., Cambridge, MA, http:==www.piezo.com
104. Polytec PI, Inc., Costa Mesa, CA, http:==www.polytechpi.com
105. Tokin America, Inc., Union City, CA, http:==www.nec-tokinamerica.com=products.html
106. TRS Ceramics Inc., State College, PA, http:==www.trsceramics.com
107. Achenbach, J. D., Wave Propagation in Solids, North-Holland, Amsterdam, 1999.
108. Alleyne, D. N. and Cawley, P., Optimization of Lamb wave inspection techniques, NDTE International, 25(1), 11-22, 1992.
109. Alleyne, D. N., Pavlakovic, B., Lowe, M. J. S., and Cawley, P., Rapid, long range inspection of chemical plant pipework using guided waves, Review of Progress in QNDE, 20, 180-187, 2001.
110. Banks, H. T., Smith, R. C., and Wang, Y., Smart Material Structures: Modeling, Estimation and Control, Masson, John Wiley & Sons, Paris, 1996.
111. Chahbaz, A., Gauthier, J., Brassard, M., and Hay, D. R., Ultrasonic technique for hidden corrosion detection in aircraft wing skin, Proceedings of the 3rd Joint Conference on Aging Aircraft, Albuquerque, NM, 1999.
112. Chang, F.-K., Built-in damage diagnostics for composite structures, Proceedings of the 10th International Conference on Composite Structures (ICCM-10), Whistler, BC, Canada, Vol. 5, pp. 283-289, August 14-18, 1995.
113. Chang, F.-K., Manufacturing and design of built-in diagnostics for composite structures, 52nd Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA, March 30-April 3, 1998.
114. Chang, F.-K., Structural health monitoring: Aerospace assessment, Aero Mat 2001, 12th ASM Annual Advanced Aerospace Materials and Processes Conference, Long Beach, CA, June 12-13, 2001.
115. Chaudhry, Z., Joseph, T., Sun, F., and Rogers, C., Local-area health monitoring of aircraft via piezoelectric actuator=sensor patches, Proceedings, SPIE North American Conference on Smart Structures and Materials, San Diego, CA, Vol. 2443, pp. 268-276, February 26-March 3, 1995.
116. Crawley, E. A. and deLuis, J., Use of piezoelectric actuators as elements of intelligent structures, AIAA Journal, 25(10), 1375-1385, 1987.
117. Culshaw, B., Pierce, S. G., and Staszekski, W. J., Condition monitoring in composite materials: An integrated system approach, Proceedings of the Institute of Mechanical Engineers, Vol. 212, Part I, pp. 189-202, Professional Engineering Publishing, London, U.K., 1998.
118. Dalton, R. P. Cawley, P., and Lowe, M. J. S., The potential of guided waves for monitoring large areas of metallic aircraft structure, Journal of Nondestructive Evaluation, 20, 29-46, 2001.
119. Diamanti, K., Hodgkinson, J. M., and Soutis, C., Damage detection of composite laminates using PZT generated Lamb waves, 1st European Workshop on Structural Health Monitoring, Paris, France, pp. 398-405, July 10-12, 2002.
120. Duke, J. C. Jr., Acousto-Ultrasonics-Theory and Applications, Plenum Press, New York, 1988.
121. Fuller, C. R., Snyder, S. D., Hansen, C. H., and Silcox, R. J. Active control of interior noise in model aircraft fuselages using piezoceramic actuators, American Institute of Aeronautics and Astronautics Paper # 90-3922, 1990.
122. Giurgiutiu, V., Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Elsevier Academic Press, Amsterdam; Boston, 2008.
123. Giurgiutiu, V., Bao, J., and Zagrai, A. N., Structural health monitoring system utilizing guided lamb waves embedded ultrasonic radar, U.S. Patent Office, 2006.
124. Giurgiutiu, V. and Zagrai, A. N., Embedded self-sensing piezoelectric active sensors for on-line structural identification, Transactions of ASME, Journal of Vibration and Acoustics, 124, 116-125, January 2001.
125. Giurgiutiu, V., Zagrai, A. N., and Bao, J., Embedded active sensors for in-situ structural health monitoring of thin-wall structures, ASME Journal of Pressure Vessel Technology, 124(3), 293-302, August 2002.
126. Grondel, S., Moulin, E., and Delebarre, C., Lamb wave assessment of fatigue damage in aluminum plates, Proceedings of the 3rd Joint Conference on Aging Aircraft, 1999.
127. Harris, C. M., Shock and Vibration Handbook, McGraw Hill, 1996.
128. Ihn, J.-B., and Chang, F.-K., Built-in diagnostics for monitoring crack growth in aircraft structures, Proceedings of the SPIE's 9th International Symposium on Smart Structures and Materials, San Diego, CA, paper #4702-04, March 17-21, 2002.
129. Ikeda, T., Fundamentals of Piezoelectricity, Oxford University Press, Oxford, 1996.
130. Lamb, H., On waves in an elastic plate, Proceedings of the Royal Society of London, Series A, Vol. 93, pp. 114, 1917.
131. Leissa, A., Vibration of Plates, NASA SP-160, U.S. Gov't Printing Office, 1969.
132. Lester, H. C. and Lefebvre, S., Piezoelectric actuator models for active sound and vibration control of cylinders, Journal of Smart Materials and Structures, 4, 295-306, July 1993.
133. Liang, C., Sun, F. P., and Rogers, C. A., Coupled electro-mechanical analysis of adaptive material system-determination of the actuator power consumption and system energy transfer, Journal of Intelligent Material Systems and Structures, 5, 12-20, January 1994.
134. Light, G. M., Minachi, A., and Spinks, R. L., Development of a guided wave technique to detect defects in thin steel plates prior to stamping, Proceeding of the 7th ASME NDE Topical Conference, San Antonio, TX, NDE-Vol. 20, pp. 163-165, 2001.
135. Lin, X. and Yuan, F. G., Damage detection of a plate using migration technique, Journal of Intelligent Material Systems and Structures, 12(7), July 2001.
136. Mustafa, V., Chahbaz, A., Hay, D. R., Brassard, M., and Dubois, S., Imaging of disbond in adhesive joints with Lamb waves; UT Online Journal (on the NDT Network), 2(3), 1997. http:==www.ndt. net=article=tektren2=tektren2.htm
137. Osmont, D., Dupont, M., Gouyon, R., Lemistre, M., and Balangeas, D., Damage and damaging impact monitoring by PZT sensors-based HUMS, Proceedings of the SPIE Smart Structures and Materials 2000: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, Newport Beach, CA, SPIE Vol. 3986, pp. 85-92, 2000.
138. Park, G. and Inman, D. J., Impedance-based structural health monitoring, monograph: Nondestructive testing and evaluation methods for infrastructure condition assessment, Woo, S. C. (Ed.), Kluwer Academic Publishers, New York, 2001.
139. Rayleigh, J. W. S., On waves propagated along the plane surface of an elastic solid, Proceedings of the London Mathematical Society, Vol. 17, pp. 4-11, 1887.
140. Rose, J. L., Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge, 1999.
141. Rose, J. L., A baseline and vision of ultrasonic guided wave inspection potential, ASME Journal of Pressure Vessel Technology-Special Issue on Nondestructive Characterization of Structural Materials, 124(3), 273-282, August 2002.
142. Rose, J. L., Rajana, K. M., and Hansch, M. K. T., Ultrasonic guided waves for NDE of adhesively bonded structures, Journal of Adhesion, 50, 71-82, 1995.
143. Singher, L., Segal, Y., and Shamir, J., Interaction of a guided wave with a nonuniform adhesion bond, Ultrasonics, 35, 385-391, 1997.
144. Sun, F. P., Liang, C., and Rogers, C. A., Experimental modal testing using piezoceramic patches as collocated sensors-actuators, Proceeding of the 1994 SEM Spring Conference & Exhibits, Baltimore, MI, June 6-8, 1994.
145. Timoshenko, S., P., Vibration Problems in Engineering, D. Van Nostrand Company Inc., New York, 1955.
146. Todd, P. D. and Challis, R. E., Quantitative classification of adhesive bondline dimensions using Lamb waves and artificial neural networks, IEEE Transactions of Ultrasonics, Ferroelectrics, and Frequency Control, 46(1), 167-181, January 1999.
147. Tzou, H. S. and Tseng, C. I., Distributed piezoelectric sensor=actuator design for dynamic measurement= control of distributed parametric systems: A piezoelectric finite element approach, Journal of Sound and Vibration, 138, 17-34, 1990.
148. Viktorov, I. A., Rayleigh and Lamb Waves: Physical Theory and Applications, Plenum Press, New York, 1967.
149. Wang, C. S. and Chang, F.-K., Built-in diagnostics for impact damage identification of composite structures, in Structural Health Monitoring 2000, Fu-Kuo Chang (Ed.), Technomic, Lancaster, PA, pp. 612-621, 2000.
150. Campbell, S. A., The Science and Engineering of Microelectronic Fabrication, Oxford University Press, New York, 2001.
151. Colclaser, R., Microelectronics-Processing and Device Design, John Wiley, New York, 1980.
152. Ghandi, S., VLSI Fabrication Principles, John Wiley, New York, 1983.
153. Guckel, H., Surface micromachined physical sensors, Sensors and Materials, 4(5), 251-264, 1993.
154. Petersen, K. E., Silicon as a mechanical material, IEEE Proceedings, 70(5), 420-457, 1982.
155. Beadle, W., Tsai, J., and Plummer, R., (Eds.), Quick Reference Manual for Silicon IC Technology, John Wiley, New York, 1985.
156. Wolfe, S. and Tauber, R., Silicon Processing for the VLSI Era, Lattice Press, Sunset Beach, CA, 1986.
157. Kovach, G. T. A., Micromachined Transducers Sourcebook, WCB McGraw-Hill, Boston, MA, 1998.
158. Madou, M., Fundamentals of Microfabrication, CRC Press, Boca Raton, FL, 2002.
159. Gad-el-Hak, M., (Ed.) The MEMS Handbook, CRC Press, Boca Raton, FL, 2001.
160. Lyshevski, S. E., Nano- and Microelectromechanical Systems: Fundamentals of Nano- and Microengineering, CRC Press, Boca Raton, FL, 2005.
161. Judy, J. W., Microelectromechanical systems (MEMS): Fabrication, design and applications, Journal of Smart Materials and Structures, 10, 1115-1134, 2001.
162. Ahn, C. H., Kim, Y. J., and Allen, M. G., A planar variable reluctance magnetic micromotor with fully integrated stator and wrapped coil, Proceedings, IEEE Micro Electro Mechanical Systems Workshop, Fort Lauderdale, FL, pp. 1-6, 1993.
163. Judy, J. W., Muller, R. S., and Zappe, H. H., Magnetic microactuation of polysilicon flexible structure, Journal of Microelectromechanical Systems, 4(4), 162-169, 1995.
164. Guckel, H., Skrobis, K. J., Christenson, T. R., Klein, J., Han, S., Choi, B., Lovell, E. G., and Chapman, T. W., Fabrication and testing of the planar magnetic micromotor, Journal Micromechanics and Microengineering, 1, 135-138, 1991.
165. Mehregany, M. and Tai, Y. C., Surface micromachined mechanisms and micro-motors, Journal Micromechanics and Microengineering, 1, 73-85, 1992.