Characterization of soot

Green Energy and Technology

Volumn 0, Issue 9781447153061, 2013, Pages 333-362

  Arnal, Cristina ^a   Alfè, Michela ^b   Gargiulo, Valentina ^b   Ciajolo, Anna ^b   Alzueta, María U ^a   Millera, Ángela ^a   Bilbao, Rafael ^a  

^a UNIVERSITY OF ZARAGOZA   (Spain)

^b CNR   (Italy)

Author keywords

Benzene; Furnace; Graphite; Polysaccharide; Porosity

Indexed keywords

ADVANCED ANALYTICS; BENZENE; CARBON BLACK; FLUORESCENCE SPECTROSCOPY; FURNACES; GRAPHITE; INDUSTRIAL RESEARCH; INFRARED SPECTROSCOPY; POLYSACCHARIDES; POROSITY; SIZE EXCLUSION CHROMATOGRAPHY; SOOT; SPECTRUM ANALYSIS;

ANALYTICAL METHOD; CARBON PARTICULATES; COMMERCIAL STANDARDS; ELECTRONIC MICROSCOPY; PHYSICAL ADSORPTION; PHYSICAL AND CHEMICAL PROPERTIES; SOOT REACTIVITIES; VISIBLE SPECTROSCOPY;

THERMOGRAVIMETRIC ANALYSIS;

EID: 85042920748     PISSN: 18653529     EISSN: 18653537     Source Type: Book Series    
DOI: 10.1007/978-1-4471-5307-8_13     Document Type: Chapter

References (104)

1. Aarna I, Suuberg EM (1997) A review of the kinetics of the nitric oxide carbon reaction. Fuel 76:475–491
2. Acik M, Mattevi C, Gong C et al (2010) The role of intercalated water in multilayered graphene oxide. ACS Nano 4:5861–5868
3. Ahlström AF, Odenbrand CUI (1989) Combustion characteristics of soot deposits from diesel engines. Carbon 27:475–483
4. Alfè M, Apicella B, Barbella R et al (2007) Distribution of soot molecular weight/size along premixed flames as inferred by size exclusion chromatography. Energy Fuels 21:136–140
5. Alfè M, Apicella B, Tregrossi A et al (2008) Identification of large polycyclic aromatic hydrocarbons in carbon particulates formed in a fuel-rich premixed ethylene flame. Carbon 46:2059–2066
6. Alfè M, Apicella B, Barbella R et al (2009) Structure-property relationship in nanostructures of young and mature soot in premixed flames. Proc Combust Inst 32:697–704
7. Alfè M, Apicella B, Rouzaud JN et al (2010) The effect of temperature on soot properties in premixed methane flames. Combust Flame 157:1959–1965
8. Apicella B, Barbella R, Ciajolo A et al (2003) Comparative analysis of the structure of carbon materials relevant in combustion. Chemosphere 51:1063–1069
9. Apicella B, Alfè M, Barbella R et al (2004) Aromatic structures of carbonaceous materials and soot inferred by spectroscopic analysis. Carbon 42:1583–1589
10. Armas O, Yehliu K, Boehman AL (2010) Effect of alternative fuels on exhaust emissions during diesel engine operation with matched combustion phasing. Fuel 89:438–456
11. Arnal C, Esarte C, Abián M et al (2010) Characterization and reactivity of soots obtained under different combustion conditions. Chem Eng Trans 22:251–256
12. Arnal C, Alzueta MU, Millera A et al (2012a) Influence of water vapor addition on soot oxidation at high temperature. Energy 43:55–63
13. Arnal C, Alzueta MU, Millera A et al (2012b) Experimental and kinetic study of the interaction of a commercial soot with NO at high temperature. Combust Sci Technol 184:1191–1206
14. Atalla RH, Agarwal UP, Bond JS (1992) Raman spectroscopy. In: Lin SY, Dence CW (eds) Methods in lignin Chemistry. Springer-Verlag, Berlin
15. 2: Real diesel versus model soots. Combust Flame 157:2086–2094
16. Berlman IB (1971) Handbook of fluorescence spectra of aromatic molecules, 2nd edn. Academic Press, New York
17. Beyssac O, Goffe B, Petitet JP et al (2003) On the characterization of disordered and heterogeneous carbonaceous materials by Raman spectroscopy. Spectrochim Acta A 59:2267–2276
18. Biagini E, Pintus S, Tognotti L (2005) Characterization of high heating-rate chars from alternative fuels using an electrodynamic balance. Proc Combust Inst 30:2205–2212
19. Birkholz M (2006) Thin film analysis by X-ray scattering. Wiley-VC H, Weinheim
20. Brown ME (2001) Introduction to thermal analysis, 2nd edn. Kluwer Academic Publisher, London
21. Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60:309–319
22. Brunauer S, Deming LS, Deming WE et al (1940) On a theory of the van der Waals adsorption of gases. J Am Chem Soc 62:1723–1732
23. Bruno A, Alfè M, Ciajolo A et al (2008) Time-resolved fluorescence polarization anisotropy of multimodal samples: the asphaltene case. Appl Phys B: Lasers Opt 90:61–67
24. Bushell GC, Yan YD, Woodfield D, Raper J, Amal R (2002) On techniques for the measurement of the mass fractal dimension of aggregates. Adv Colloid Interface Sci 95:1–50
25. Buzea C, Pacheco Blandino II, Robbie K (2007) Nanomaterials and nanoparticles: sources and toxicity. Biointerphases 2:MR17-MR172
26. Cai J, Lu N, Sorensen CM (1995) Analysis of fractal cluster morphology parameters: structural coefficient and density autocorrelation function cutoff. J Colloid Int Sci 171:470–473
27. Carrasco-Marín F, López-Ramón MV, Moreno-Castilla C (1993) Applicability of the Dubinin-Radushkevich equation to carbon dioxide adsorption on activated carbons. Langmuir 9:2758–2760
28. Centrone A, Brambilla L, Renouard T et al (2005) Structure of new carbonaceous materials: the role of vibrational spectroscopy. Carbon 43:1593–1609
29. Cetin E, Moghtaderi B, Gupta R et al (2004) Influence of pyrolysis conditions on the structure and gasification reactivity of biomass chars. Fuel 83:2139–2150
30. Ciajolo A, Alfè M, Apicella B et al (2009) Characterization of carbon particulate matter relevant in combustion. Chem Eng Trans 17:99–104
31. Clar E (1964) Polycyclic hydrocarbons. Academic Press, New York
32. Cuesta A, Dhamelincourt P, Laureyns J et al (1998) Comparative performance of X-ray diffraction and Raman microprobe techniques for the study of carbon materials. J Mater Chem 8:2875–2879
33. D’Anna A (2009) Combustion-formed nanoparticles. Proc Combust Inst 32:593–613
34. Darmstadt H, Roy C, Kaliaguine S et al (2000) Solid state 13C-NMR spectroscopy and XRD studies of commercial and pyrolytic carbon blacks. Carbon 38:1279–1287
35. Donohue MD, Aranovich GL (1998) Adsorption hysteresis in porous solids. J Colloid Interf Sci 205:121–130
36. Dresselhaus MS, Dresselhaus G, Eklund PC (1996) Science of fullerenes and carbon nanotubes. Elsevier Science, Academic Press, USA
37. Ferrari AC, Robertson J (2000) Interpretation of Raman spectra of disordered and amorphous carbon. Phys Rev B: Condens Matter 61:14095–14107
38. Ferraro JR, Nakamoto K, Brown CW (2003) Introductory Raman spectroscopy, 2nd edn. Elsevier, San Diego
39. Fetzer JC (2000) Large (C >=24) Polycyclic aromatic hydrocarbons: Chemistry and analysis. Wiley-Interscience, New York
40. Giechaskiel B, Alfoldy B, Drossinos Y (2009) A metric for health effects studies of diesel exhaust particles. J Aerosol Sci 40:639–651
41. González-Martín ML, Valenzuela-Calahorro C, Gómez-Serrano V (1994) Characterization study of carbonaceous materials. Calorimetric heat of adsorption of p-nitrophenol. Langmuir 10:844–854
42. Goodhew PJ, Humphreys J, Beanland R (2001a) The scanning electron microscope. In: Electron Microscopy and Analysis, 3rd edn. (electronic copy) Taylor and Francis Books UK. Available via Core Materials. http://es.scribd.com/doc/27762962/The-Scanning-Electron-Microscope. Accessed 26 Feb 2012
43. Goodhew PJ, Humphreys J, Beanland R (2001b) Microscopy with light and electrons. In: Electron Microscopy and Analysis, 3rd edn. (electronic copy) Taylor and Francis Books UK. Available via Core Materials. http://es.scribd.com/doc/27761327/Microscopy-With-Light-and-Electrons. Accessed 26 Feb 2012
44. Guerrero M, Ruiz MP, Millera A et al (2008) Characterization of biomass chars formed under different devolatilization conditions: differences between rice husk and eucalyptus. Energy Fuels 22:1275–1284
45. Hansen J, Nazarenko L (2004) Soot climate forcing via snow and ice albedos. P Natl Acad Sci USA 101:423–428
46. Haghseresht F, Lu GQ, Whittaker AK (1999) Carbon structure and porosity of carbonaceous adsorbents in relation to their adsorption properties. Carbon 37:1491–1497
47. Herod AA, Lazaro MJ, Suelves I et al (2000) Size exclusion chromatography of soots and coalderived materials with 1-methyl-2-pyrrolidinone as eluent: Observations on high molecular mass material. Energy Fuels 14:1009–1020
48. Higgins KJ, Jung H, Kittelson DB et al (2003) Kinetics of diesel nanoparticle oxidation. Environ Sci Technol 37:1949–1954
49. Hussain R, Qadeer R, Ahmad M et al (2000) X-ray diffraction study of heat-treated graphitized and ungraphitized carbon. Turk J Chem 24:177–183
50. Illán-Gómez MJ, Linares-Solano A, Salinas-Martínez de Lecea C et al (1993) NO reduction by activated carbons. 1. The role of carbon porosity and surface-area. Energy Fuels 7:146-154
51. Ishiguro T, Takatori Y, Akihama K (1997) Microstructure of diesel soot particles probed by Electron-Microscopy- first observation of inner-core and outer shell. Combust Flame 108:231–234
52. Iwashita N, Park CR, Fujimoto H et al (2004) Specification for a standard procedure of X-ray diffraction measurements on carbon materials. Carbon 42:701–714
53. Jäger C, Henning T, Schlögl R et al (1999) Spectral Properties of Carbon Black. J Non-Cryst Solids 258:161–179
54. Jakubov TS (2008) The reasons behind adsorption hysteresis In: Bottani EJ and Tascón JMD (eds) Adsorption by carbons, Elsevier Ltd., UK
55. Jawhari T, Roid A, Casado J (1995) Raman-spectroscopic characterization of some commercially available carbon-black materials. Carbon 33:1561–1565
56. 2O in a flow reactor simulating diesel engine DPF. Int J Automot Technol 9:423–428
57. Kameya Y, Hanamura K (2011) Kinetic and Raman spectroscopic study on catalytic characteristics of carbon blacks in methane decomposition. Chem Eng J 173:627–635
58. Kapoor A, Ritter JA, Yang RT (1989) On the Dubinin-Radushkevich equation for adsorption in microporous solids in the Henry’s law region. Langmuir 5:1118–1121
59. Köylü ÜÖ, Faeth GM, Farias TL, Carvalho MG (1995a) Fractal and projected structure properties of soot aggregates. Combust Flame 100:621–633
60. Köylü ÜÖ, Xing Y, Rosner DE (1995b) Fractal morphology analysis of combustion-generated aggregates using angular light scattering and electron microscope images. Langmuir 11:4848–4854
61. Kühner G, Voll M (1993) Manufacture of carbon black. In: Donnet JB, Bansal RC, Wang MJ (eds) Carbon black, 2nd edn. Marcel Dekker Inc., New York
62. Lapuerta M, Oliva F, Agudelo JR et al (2012) Effect of fuel on the soot nanostructure and consequences on loading and regeneration of diesel particulate filters. Combust Flame 159:844–853
63. Levenspiel O (1999) Chemical reaction engineering, 3rd edn. John Wiley & Sons Inc., New York
64. Lu L, Sahajwalla V, Kong C et al (2001) Quantitative X-ray diffraction analysis and its application to various coals. Carbon 39:1821–1833
65. Lu L, Kong C, Sahajwalla V et al (2002) Char structural ordering during pyrolysis and combustion and its influence on char reactivity. Fuel 81:1215–1225
66. Luis IC (1987) Chemistry of pitch carbonization. Fuel 66:1527–1532
67. Mandelbrot BB (1975) Les objets fractals: forme, hasard et dimension. Flammarion, Paris
68. Martín-Martínez JM (1990) Generalidades sobre adsorción física de gases y vapores en carbones. In: Secretariado de Publicaciones de la Universidad de Alicante (ed) Adsorción física de gases y vapores por carbones, Espagrafic (electronic copy). Available via Universidad de Alicante: http://rua.ua.es/dspace/bitstream/10045/4291/4/adsorcion_fisica_2.pdf. Accessed 12 Feb 2012
69. Megaridis CM, Dobbins RA (1990) Morphological description of flame-generated materials. Combust Sci Technol 71:95–109
70. Mendiara T, Domene MP, Millera A et al (2005) An experimental study of the soot formed in the pyrolysis of acetylene. J Anal Appl Pyrol 74:486–493
71. Mendiara T, Alzueta MU, Millera A et al (2008) Influence of the NO concentration and the presence of oxygen in the acetylene soot reaction with NO. Energy Fuels 22:284–290
72. Neeft JPA, Nijhuis TX, Smakman E et al (1997) Kinetics of the oxidation of diesel soot. Fuel 76:1129–1136
73. x and soot from diesel exhaust: Oxidation behaviour of carbon materials used as model soot. Appl Catal B 75:11–16
74. Oberlin A (1989) TEM studies of carbonization and graphitization. In: Thrower PA (ed) Chemistry and physics of carbon, vol 22. Marcel Dekker Inc., New York, pp 1–143
75. Paredes JI, Villar-Rodil S, Solis-Fernandez P et al (2009) Atomic force and scanning tunneling microscopy imaging of graphene nanosheets derived from graphite oxide. Langmuir 25:5957–5968
76. Park HY, Seo SI (2007) Characteristics of residual carbon derived from the combustion of vacuum residue in a test furnace. Environ Eng Res 12:109–117
77. Peña MA (2011) Introducción. In: Faraldos M, Goberna C (eds) Técnicas de análisis y caracterización de materiales, 2nd edn. Consejo Superior de Investigaciones Científicas, Madrid
78. Rodil SE, Ferrari AC, Robertson J et al (2001) Raman and infrared modes of hydrogenated amorphous carbon nitride. J Appl Phys 89:5425–5430
79. Robertson J (2002) Diamond-like amorphous carbon. Mater Sci Eng R 37:129–281
80. Rouzaud JN, Clinard C (2002) Quantitative high-resolution transmission electron microscopy: a promising tool for carbon materials characterization. Fuel Process Technol 77–78:229–235
81. 2 and NO of the soot formed from ethylene pyrolysis at different temperatures. Int J Chem Reactor Eng 5:A50
82. Russo C, Stanzione F, Tregrossi A et al (2012) The effect of temperature on the condensed phases formed in fuel-rich premixed benzene flames. Combust Flame 159:2233–2242
83. Sánchez NE, Callejas A, Millera A et al (2012) Formation of PAH and soot during acetylene pyrolysis at different gas residence times and reaction temperatures. Energy 43:30–36
84. Santamaria A, Yang N, Eddings E et al (2010) Chemical and morphological characterization of soot and soot precursors generated in an inverse diffusion flame with aromatic and aliphatic fuels. Combust Flame 157:33–42
85. Seong HJ, Boehman AL (2010) Impact of intake oxygen enrichment on oxidative reactivity and properties of diesel soot. Energy Fuels 25:602–616
86. 2 in the accelerated combustion of soot in diesel exhaust gases. Appl Catal B 50:185–194
87. Sharma A, Kyotani T, Tomita A (1999) A new quantitative approach for microstructural analysis of coal char using HRTEM images. Fuel 78:1203–1212
88. Shim H-S, Hajaligol MR, Baliga VL (2004) Oxidation behavior of biomass chars: pectin and Populus deltoides. Fuel 83:1495–1503
89. Shim H-S, Hurt RH, Yang NYC (2000) A methodology for analysis of 002 lattice fringe images and its application to combustion-derived carbons. Carbon 38:29–45
90. Shimodaira N, Masui A, Takada A et al (2001) Structural information from the Raman spectra of activated carbon materials. American Carbon Society, 25th Biennial Conference on Carbon, Hyatt Regency Lexington, Lexington, 14–19 July 2001
91. Shui HF (2005) Effect of coal extracted with NMP on its aggregation. Fuel 84:939–941
92. Silverstein M, Webster FX, Kiemle D (2005) Spectrometric identification of organic compounds, 7th edn. Wiley, New York
93. Sing KSW (2008) Overview of physical adsorption by carbons. In: Bottani EJ and Tascón JMD (eds) Adsorption by carbons, Elsevier Ltd., UK
94. Sing KSW, Everett DH, Haul RAW et al (1985) Reporting physisorption data for gas/solid systems with special reference to the determination of surface area porosity. Pure Appl Chem 57:603–619
95. Song J, Song C, Tao Y et al (2011) Diesel soot oxidation during the late combustion phase. Combust Flame 158:446–451
96. Stratakis GA, Stamatelos AM (2003) Thermogravimetric analysis of soot emitted by a modern diesel engine run on catalyst-doped fuel. Combust Flame 132:157–169
97. Szekely J, Evans JW, Sohn HY (1976) Gas-solid reactions. Academic Press Inc., New York
98. Tregrossi A, Barbella R, Ciajolo A et al (2007) Spectral properties of soot in the UV-Visible range. Combust Sci Technol 179:371–385
99. Vander Wal RL, Tomasek AJ (2003) Soot oxidation: dependence upon initial nanostructure. Combust Flame 134:1–9
100. Vo-Dinh T (1978) Multicomponent analysis by synchronous luminescence spectrometry. Anal Chem 50:396–401
101. Vollebregt S, Ishihara R, Tichelaar FD et al (2012) Influence of the growth temperature on the first and second-order Raman band ratios and widths of carbon nanotubes and fibers. Carbon 50:3542–3554
102. Wang WX, Thomas KM, Cai HY et al (1996) NO release and reactivity of chars during combustion: The effect of devolatilization temperature and heating rate. Energy Fuels 10:409–416
103. Williams DB, Carter CB (2009) Transmission Electron Microscopy, 2nd edn. Springer, New York
104. Xi J, Zhong BJ (2006) Soot in diesel combustion systems. Chem Eng Technol 29:665–673