Microfibrillated nanocellulose from balsa tree as potential reinforcement in the preparation of ‘green’ composites with castor seed cake

Journal of Cleaner Production

Volumn 149, Issue , 2017, Pages 1157-1163

  Kumode, Marina Mieko Nishidate ^a   Bolzon, Graciela I Muniz ^b   Magalhães, Washington L E ^c   Kestur, Satyanarayana G ^c,d  

^a PONTIFÍCIA UNIVERSIDADE CATÓLICA DE CAMPINAS   (Brazil)

^b FEDERAL UNIVERSITY OF PARANÁ   (Brazil)

^c EMBRAPA CERRADOS   (Brazil)

^d POORNAPRAJNA INSTITUTE OF SCIENTIFIC RESEARCH   (India)

Author keywords

Castor bean cake; Flexural strength; Fractography; Nanocomposites; Sustainable technology; Thermo molding

Indexed keywords

BENDING STRENGTH; CELLULOSE; CHARACTERIZATION; ENVIRONMENTAL IMPACT; FORESTRY; FRACTOGRAPHY; FRACTURE MECHANICS; MOLDING; NANOCOMPOSITES; NATURAL POLYMERS; REINFORCEMENT; SUSTAINABLE DEVELOPMENT; SWELLING; WATER ABSORPTION;

BIODEGRADABLE COMPOSITES; CASTOR BEANS; ECO-FRIENDLY MATERIALS; FLEXURAL MODULUS; INDUSTRIAL RESIDUES; NANOFIBRILLAR CELLULOSE; STRUCTURAL APPLICATIONS; SUSTAINABLE TECHNOLOGY;

POLYMER MATRIX COMPOSITES;

CELLULOSE DERIVATIVES; COMPOSITES; E I S; OCHROMA;

EID: 85015947676     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2017.02.083     Document Type: Article

References (56)

1. Adeosun, S.O., Lawal, G.I., Balogun Sambo, A., Emmanuel, A.I., Review of green polymer nanocomposites. J. Min. Mater. Charact. Eng. 11:4 (2012), 483–514.
2. Dufresne, A., Meideiros, E.S., Orts, W.J., Starch based nanocomposites. Chapter 9. Bertolini, A., (eds.) Starch: Characterization Properties and Applications, 2009, CRC Press, Rio de Janeiro, 205–251.
3. Faruk, O., Bledzki, A.K., Fink, H.-P., Sain, M., Biocomposites reinforced with natural fibers: 2000-2010. 2012. Prog. Polym. Sci. 37 (2012), 1552–1596.
4. Guimarães, J.L., Preparation and Characterization of Composites of Plasticized Starch with Glycerol and reinforced with Natural Fibers”. [Preparação e Caracterização de Compósitos de Amido Plastificado com Glicerol e reforçados com Fibras Naturais]. Ph.D. Thesis, Engineering and Materials Science, 2010, Federal University of Parana, Curitiba (PR-Brazil) ([In Portuguese]).
5. Guimarães, J.L., Cursino, A.C.T., Saul, C.K., Sierrakowski, M.R., et al. Effect of processing conditions on tensile properties of green composites of Castor oil cake starch-plant fibers. J. Bioproc. Biotechn., 5(1), 2014, 8.
6. Guimarães, J.L., Satyanarayana, K.G., Wypych, F., Saul, C.K., Ramos, L.P., Studies on the processing and characterization of cornstarch and its composites with banana and sugarcane fibers of Brazil. Carbohyd. Polym. 80 (2010), 130–138.
7. Hubbe, M.A., Rojas, O.A., Lucia, L.A., Saini, M., Cellulosic nanocomposites: a review. Biores. 3:3 (2008), 929–980.
8. Iwamoto, S., Nagaito, A.N., Yano, H., Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites. Appl. Phys. A 89 (2007), 461–466.
9. Jawaid, M., Abdul Khalil, H.P.S., Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review. Carbohydr. Polym. 86:1 (2011), 1–18.
10. Kaewtatip, K., Thongmee, J., Preparations of thermoplastic starch/treated bagasse fiber composites. Starch Stärke 66:7–8 (2014), 724–728.
11. Karimi, S., Dufresne, A., Tahir, P.M., Karimi, A., Abdulkhani, A., Biodegradable starch based composites: effect of micro and nano reinforcements on composite properties. J.Mater. Sci. 49:13 (2014), 4513–4521.
12. Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., Dorris, A., Nanocelluloses: a new family of nature-based materials. Angew. Chem. Ent. Ed. 50 (2011), 5438–5466.
13. Lacerda, R.S., Bittante, A.M.Q.B., Chambi, H., Gomide, C.A., et al. Castor bean cake as raw material for biodegradable material. Petros, S.T., Nikolaos, G.S., Voios, T.K., George, D.S., (eds.) Proceedings of 11th International Congress on Engineering and Food (ICEF11), Athens (Greece). Cosmosware, Ag. Ioannou 53, Athens, Greece, 0030 2106013922. May 22-26, 2011, 2011, 6 Available at: www.icef11.org/content/papers/fms/FMS174.pdf (Accessed on 8th July 2014).
14. Lomelí-Ramirez, M.G., Satyanarayana, K.G., Iwakiri, S., Bolzon, M.G., et al. Study of the properties of biocomposites: part I – cassava starch-green coir fibers of Brazil. Carbohydr. Polym. 86:4 (2011), 1712–1722.
15. Lomelí-Ramirez, M.G., Satyanarayana, K.G., Iwakiri, S., Bolzon, M.G., et al. Bio-composites of cassava starch-green coconut fiber: Part II—structure and properties. Carbohyd. Polym. 102 (2014), 576–583.
16. Magalhães, W.L.E., Cao, X., Lucia, L.A., Cellulose nanocrystals/cellulose corein-shell nanocomposite assemblies. Langmuir 25:22 (2009), 13250–13257.
17. Makishi, G.L.A., Lacerda, R.S., Bittante, A.M.Q.B., Chambi, H.N.M., et al. Films based on castor bean (Ricinus communis L.) proteins cross linked with glutaraldehyde and glyoxal. Ind. Crops Prod. 50 (2013), 375–382.
18. Machado, A.C.O.M., Ribeiro, C.M.S., Freire, D.M.G., Cunha, L.M., et al. Material compósito contendo material termoplástico e material protéico e processo de obtenção. BR PI0804101-6 A2, Brazil. Available from:, 2010 http://www.patentesonline.com.br/material-comp-sito-contendo-material-termopl-stico-e-material-prot-ico-e-processo-229188.html (Accessed on: 16 July 2014).
19. Marina, M.N.K., Potential of the Use of the Castor Oil Cake (Ricinus communis L.) as matrix for the Production of Composites and Nanocomposites [Potential do Uso da a Torta de Mamona (Ricinus communis L.) Como Matriz Para Produção de Compósitos e Nanocompósitos]. Ph.D. Thesis, Engineering and Materials Science, 2013, Federal University of Parana, Curitiba (PR-Brazil), 2013 ([In Portuguese]).
20. Mariano, M., El Kissi, N., Dufresne, A., Cellulose nanocrystals and related nanocomposites: review of some properties and challenges. J. Polym. Sci. Part B Polym. Phys. 52:12 (2014), 791–806.
21. Marini, J., Branciforti, M.C., Lotti, C., Effect of matrix viscosity on the extent of exfoliation in EVA/organo clay nanocomposites. Polym. Adv. Technol. 21:6 (2010), 408–417.
22. Matveev, Y.I., Grinberg, V.Y., Tolstoguzov, V.B., The plasticizing effect of water on proteins, polysaccharides and their mixtures, glassy state of biopolymers, food and seeds. Food Hydrocoll. 14:5 (2000), 425–437.
23. Medeiros, E.S., Dufresne, A., Orts, W.J., Starch based nanocomposites. Bertolini, A., (eds.) Characterization Properties and Applications, 2010, CRC Press, 2010; CRC Press Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742 © by Taylor and Francis Group, LLC, 205–251 (Chapter 9).
24. Medeiros, E.S., Mattoso, L.H.C., Ito, E.N., Gregorski, K.S., et al. Electrospun nano fibers of poly(vinyl alcohol) reinforced with cellulose nanofibrils. J. Biobased Mater. Bioener. 2:3 (2008), 231–242.
25. Montoya, U., Zuluaga, R., Castro, C., Goyanes, S., Ganan, P., Development of composite films based on thermoplastic starch and cellulose microfibrils from Colombian agro-industrial wastes. J. Thermoplast. Compos. Mater. 27:3 (2014), 413–426.
26. Mohanty, A.K., Misra, M., Drzal, L.T., Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. J. Polym. Environ. 10:1/2 (2002), 19–26.
27. Morán, J.I., Alvarez, V.A., Cyras, V., Vásquez, A., Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose 15 (2008), 149–159.
28. Nair, A.B., Sivasubramanian, P., Balakrishnan, P., Nair, K.A., et al. Environmental effects, biodegradation and life cycle analysis of fully biodegradable ‘green’ composites. Chapter:7. Thomas, S., Joseph, K.S., Malhotra, S.K., Goda, K., Sreekala, M.S., (eds.) Polymer Compositres, vol. 3, 2013, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 515–568, 10.1002/9783527674220.
29. Nakagaito, A.N., Takagi, H., Pandey, H.K., The processing and mechanical performance of cellulose nanofiber-based composites. Int. J. Ocean. Sys. Eng. 1:4 (2011), 180–184.
30. Nechyporchuk, O., Belagecem, M.N., Bras, J., Production of cellulose nanofibrils: a review of recent advances. Indus. Crops Prod. 93 (2016), 2–25.
31. Prachayawarakorn, J., Sagnitidej, P., Boonpasith, P., Properties of thermoplastic rice-starch composites reinforced by cotton fiber or low-density polyethylene. Carbohyd. Polym. 81 (2010), 425–433.
32. Reddy, M.M., Vivejanandhan, S., Misra, M., Bhatia, S.K., Mohanty, A.K., Biobased plastics and bionanocomposites: current status and future opportunities. Prog. Polym. 38 (2013), 1653–1689.
33. Samir, M.A.S.A., Alloin, F., Dufresne, A., Review of recent research into cellulosic whiskers, their properties and their application in nano composite field. Biomacromolecules 6:2 (2005), 612–626.
34. Santos, R.A., Characterization and evaluation of the castor oil cake (Ricinuscommunis) for application in polymer matrix composites. [DissertationCaracterização e avaliação do farelo da mamona (Ricinuscommunis) para aplicação em compósitos de matriz polimérica]. Dissertação, 2010, Federal University of Bahia, Salvador (Bahia-Brazil) ([In Portuguese]).
35. Satyanarayana, K.G., Gregorio, G.C.A., Wypych, F., Biodegradable composites based on lignocellulosic fibers -an overview. Prog. Polym. Sci. 34:9 (2009), 982–1021.
36. Satyanarayana, K.G., Wypych, F., Woehl, M.A., et al. Nanocomposites based on starch and fibers of natural origin. Pilla, Srikanth, (eds.) Handbook of Bioplastics and Biocomposites Engineering Applications, 1, 2011, Scrivener Publishing LLC, 3 Winter Street, Suite 3, Salem, MA 01970, 469–508 (Chapter 17). [ISBN No: 978-0470626078].
37. Satyanarayana, K.G., Prasad, V.S., Starch based ‘green’ composites. Chapter 8. Kalia, Susheel, (eds.) Biodegradable Green Composites, 2016, John Wiley & Sons, Inc., Hoboken, NJ 07030, USA, 200–298.
38. Sehaqui, H., Allais, M., Zhou, Q., Berglund, L.A., Wood cellulose biocomposites with fibrous structures at micro- and nanoscale. Compos. Sci. Technol. 71 (2011), 382–387.
39. Shah, D.U., Developing plant fibre composites for structural applications by optimising composite parameters: a critical review. J. Mater. Sci. 48 (2013), 6083–6107.
40. Siró, I., Plackett, D., Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17 (2010), 459–494.
41. Spence, K.L., Processing and Properties of Microfibrillated Cellulose. Ph. D. Dissertation (Forest Biomaterials), 2011, North Carolina State University, USA, 269 Available from: http://repository.lib.Ncsu.edu/ir/bitstream/1840.16/6909/1/etd.pdf (Accessed on 18th April 2013).
42. Spiridon, I., Teacă, C.-A., Bodîrlă, R., Bercea, M., Behaviour of cellulose reinforced cross-linked starch composite films made with tartaric acid modified starch microparticles. J. Polym. Environ. 21:2 (2013), 431–440.
43. Sreekumar, P.A., Lebianc, N., Saiter, J.M., Effect of glycerol on the properties of 100 % biodegradable thermoplastic based on wheat flour. J. Polym. Environ. 21:2 (2013), 388–394.
44. Takagi, H., Asano, A., Effects of processing conditions on flexural properties of cellulose nanofiber reinforced ‘green’ composites. Compos. Part A 39:4 (2008), 685–689.
45. Teixeira, E.D., Pasquini, D., Curvelo, A.A.S., Corradini, E., et al. Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch. Carbohyd. Polym. 78:3 (2009), 422–431.
46. Thakur, V.K., (eds.) Nanocellulose Polymer Nanocomposites: Fundamentals and Applications, 2014, John Wiley & Sons, 536, 10.1002/9781118872246.
47. Thakur, V.K., Thakur, M.K., Eco-friendly Polymer Nanocomposites: Chemistry and Applications, 2015, Springer, 10.1007/978-81-322-2473-0.
48. Thakur, V.K., Kessler, M.R., Self-healing polymer nanocomposites materials-a review. Polymer 69 (2015), 369–383.
49. Thakur, V.K., Thakur, M.K., Gupta, R.K., Prasanth, R., et al. Green composites- an introduction. Thakur, V.K., (eds.) Green Composites from Natural Resources, 2013, CRC Press, (Taylor & Francis) U.S.A., 1–10 ISBN: 9781466570696.
50. Vanderleia, A., Obtaining of therm-molded composites through the use of castor oil cake plastified with glycerol, derivative of the transesterefication of oils and fats (Obtenção de compósitos termomoldados a partir da torta de mamona plastificada com glicerol, derivado do processo de transesterificação de óleos e gorduras). Masters’ Thesis, 2009, Federal University of Parana, (UFPR), Curitiba (PR-Brasil). (In Portuguese).
51. Zhen, W., Study on nano cellulose/starch composite, sports materials, modeling and simulation. Wu, Y.W., (eds.) Advanced Materials Research, vol. 187, 2011, Trans. Tech. Publications, Inc., Kreuzstrasse 10, 8635 Dürnten, Switzerland, 544–547.
52. http://www.marketresearchstore.com/report/nanocellulose-market-z53869-Nanocellulose (Nano-crystalline Cellulose, Nano-fibrillated Cellulose and Bacterial Nanocellulose) Market for Composites, Oil & Gas, Paper Processing, Paints & Coatings, and Other Applications: Global Industry Perspective, Comprehensive Analysis, Size, Share, Growth, Segment, Trends and Forecast, 2015 – 2021. Published: 15-Apr-2016 | Published By: Market Research Store. Number of pages: 110 | Code: MRS – 53869. Accessed on 23/12/2016 10:17hs.
53. ASTM D790–10: Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (2003).
54. ASTM D638–10: Standard Test Method for Tensile Properties of Plastics (2010).
55. EUROPEAN STANDARD. EN 323: Determinação da massa volúmica. Versão Portuguesa. Bruxelas (2002).
56. EUROPEAN STANDARD. EN 317: Determination of Swelling in Thickness after Immersion in Water. English Version (2002).