Consideration and modeling of use processes in computer-aided conceptual design: A state of the art review

Journal of Integrated Design and Process Science

Volumn 6, Issue 2, 2002, Pages 25-59

  Wilfred Van Der Vegte ImreHorváth, Wilhelm F ^a   Horváth, Imre ^a  

^a FACULTY OF INDUSTRIAL DESIGN ENGINEERING   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013620871     PISSN: 10920617     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (135)

1. Akiyama, K., 1991, "Function analysis-systematic improvement of quality and performance", Cambridge (MA): Productivity Press.
2. Allen, J.F., 1983, "Maintaining knowledge about temporal intervals", Communications of the ACM, vol. 26, No. 12, pp. 832-843.
3. Andreasen, M.M., Hansen, C.T., Mortensen, N.H., 1996, "The structuring of products and product programmes", in: Tichem, M. et al. (Eds.): Proceedings of the second WDK Workshop on Product Structuring. Delft: Delft University of Technology.
4. Antoun, N., Jankovich, E., Estebenet, T., 1995, "Applications of a major FEM code to the stress analysis of rubber parts", Kautschuk Gummi Kunststoffe 48 (2), pp. 94-98.
5. Ayoub, M.M., Woldstad, J.C., 1999, "Models in manual materials handling", In: Kumar, S. (Ed.): Biomechanics in ergonomics, pp. 267-305. London: Taylor & Francis Ltd.
6. Baciu, G., Sai-Keung Weung, W., Sun, H., 1998, "Hardware-assisted virtual collisions", Proceedings of ACM VRST 1998.
7. Badler, N.I., Phillips, C.B., Webber, B.W., 1993, "Simulating humans-computer graphic animations and control", New York: Oxford University Press.
8. Bailey, C., Taylor, G.A., Cross, M., Chow, P., 1999, "Discretisation procedures for multi-physics phenomena", Journal of Computational and Applied Mathematics 103, pp. 3017.
9. Bandak, F.A., Tannous, R.E., Toridis, T., 2001, "On the development of an osseo-ligamentous finite element model of the human ankle joint", Int. Journal of Solids and Structures 38, pp. 1681-1697.
10. Bannock, G., Baxter, R.E., Evans, E. (eds.)., 1998, "The Penguin Dictionary of Economics", London: Penguin Books Ltd.
11. Baraff, D., Witkin, A., 1998, "Large steps in cloth simulation", Proc. of SIGGRAPH 98, pp. 43-54.
12. Bordeux, C., Boulic, R., Thalmann, D., 1999, "An efficient and flexible perception pipeline for autonomous agents", Eurographics, Vol. 18, No. 3, page numbers unknown.
13. Bourbon, W.T., Powers, W.T., 1999, "Models and their worlds", Int. J. Human-Computer Studies (1999) 50, pp. 445-461.
14. Bourguignon, D., Cani, M.-P., 2000, "Controlling anisotropy in mass-spring systems", Proc. of the 11th Eurographics workshop, Computer Animation and Simulation '00, pp. 113-123.
15. Brown, B.A.T., Perry, M., 2000, "Why don’t telephones have off switches? Understanding the use of everyday technologies-a research note", Interacting with computers Vol. 12, pp. 623-634.
16. Bryant, C.R., Kurfman, M.A., Stone, R.B., McAdams, D.A., 2001, "Creating equation handbooks to model design performance parameters", In: Culley, S., Duffy, A., McMahon, C., Wallace, K. (Eds.): Design research-theories, methodologies and product modelling, Proceedings of ICED 2001 Glasgow, pp. 501-508. London: Professional Engineering Publishing.
17. Buur, J., Bødker, S., 2000, "From usability lab to ‘design collaboration’: reframing usability practice", Proceedings of ACM DIS 2000.
18. Buur, J., Nielsen, P., 1995, "Design for usability-adopting human computer interaction methods for the design of mechanical products", Proc. of ICED 1995.
19. Buur, J., Windum, J., Jakobsen, M.M., 1991, "Man/machine interface design needs systematic methods", Proc. of ICED 1991.
20. Cain, W.D., 1969, "Engineering Product Design", London: Business Books Limited.
21. Çakır, A.E., 2000, "Improving the quality and usability of everyday products: a case for report systems", Human factors and ergonomics in manufacturing Vol. 10 (1) p. 3-21.
22. Cerezo, E., Pina, A., Serón, F.J., 1999, "Motion and behaviour modelling: state of the art and new trends", The Visual Computer Vol. 15, pp. 124-146.
23. Chakrabarti, A., 1999, "A product design principle", Proceedings of ICED 1999 (2) p. 751-756.
24. Chandrasekaran, B., Kaindl, H., 1996, "Representing functional requirements and user-system interactions", Proc. of AAAI 1996 Workshop on modeling and reasoning about function.
25. Chow, W.W., Odell, E.I., 1977, "Deformations and stresses in soft body tissues of a sitting person", Journal of Biomechanical Engineering, May 1978, Vol. 100, pp. 79-87.
26. Christiaans, H.H.C.M., Bremner, A., 1998, "Comfort on bicycles and the validity of a commercial bicycle fitting system", Applied Ergonomics, Vol. 29, No. 3, pp. 201-211.
27. Clugston, M.J. (Ed.)., 1998, "The New Penguin Dictionary of Science", London: Penguin Books Ltd.
28. Dirken, J.M., 1997, "Productergonomie-ontwerpen voor gebruikers (in Dutch)", Delft: Delft University Press.
29. Dixon, P., Vaske, B.H.M., Neervoort, P.C., 1997, "User involvement in concept creation", Proc. of ACM DIS 1997.
30. Doltsinis, I. St., 1997, "Solution of coupled systems by distinct operators", Engineerig Computations, Vol. 14 No. 8, pp. 829-868.
31. Dubrovski, D., 2001, "The role of customer satisfaction in achieving business excellence", Total Quality Management: 12 (7-8), pp. 920-925.
32. Erens, F., Verhulst, K., 1997, "Architectures for product families", Computers in industry 33, pp. 165-178.
33. Feng, S.C., Song, E.Y., 2000, "Information modeling of conceptual process planning integrated with conceptual design", Proceedings of ASME DETC/DFM 2000.
34. Finger, S., Chan, X., Lan, R., Cahn, B., 2001, "Creating virtual prototypes-integrating design and simulation", In: Culley, S., Duffy, A., McMahon, C., Wallace, K. (Eds.): Design research-theories, methodologies and product modelling, Proceedings of ICED 2001 Glasgow, pp. 485-492. London: Professional Engineering Publishing.
35. Forbus, K.D., 1984, "Qualitative Process Theory", Artificial Intelligence 24 (1984) 85-168.
36. Fowler, H.W., Fowler, F.G (eds.)., 1961, "The concise Oxford dictionary", Oxford: Clarendon Press.
37. Fowler, T.C., 1990, "Value analysis in design", New York: Van Nostrand Reinhold.
38. Franke, H.-J., 1975, "Methodische Schritte beim Klären konstruktiver Aufgabenstellungen", Konstruktion 27 (1975), pp. 395-402.
39. Gasthuber, H., Gierse (initials unknown), Kaniowsky, H., Mühle (initials unknown), Schenikau, B., Schöler, H.R. (eds.)., 1991, "Wertanalyse: Idee-Methode-System", Düsseldorf: VDI-Verlag.
40. Gawthrop, P.J., Ronco, E., 2000, "Estimation and control of mechatronic systems using sensitivity bond graphs", Control Engineering Practice 8, pp. 1237-1248.
41. Green, W.S., 2000, "Human factors in competitive product design and engineering", Proceedings of TMCE 2000, pp. 43-53.
42. Gunter, C.A., Gunter, E.L., Jackson, M., Zave, P., 2000, A reference model for requirements and specifications, IEEE Software, May/June 2000, pp. 37-43.
43. Hansen, C.T., 1996, "Towards a tool for computer supported configuring of machine systems", in: Tichem, M. et al. (Eds.): Proceedings of the second WDK Workshop on Product Structuring. Delft: Delft University of Technology.
44. Harrison, L-A., Clarkson, P.J., Keates, S., 2001, "Inclusive design-user capabilities and product demands", In: Culley, S., Duffy, A., McMahon, C., Wallace, K. (Eds.): Design methods for performance and sustainability, Proceedings of ICED 2001 Glasgow, pp. 299-306. London: Professional Engineering Publishing.
45. Hauth, M, Etzmuss, O., 2001, "A high performance solver for the animation of deformable objects using advanced numerical methods", Eurographics Vol. 20, No. 3, page numbers unknown.
46. Honda, S., Tomioka, H., Kimura, T., Oosawa, T., Okada, K-I., Matsushita, Y., 1999, "A company-office system "Valentine" providing informal communication and personal space based on 3D virtual space and avatars", Information and software technology Vol. 41, pp. 383-397.
47. Honderich, T. (Ed.)., 1995, "The Oxford Companion to Philosophy", Oxford: Oxford University Press.
48. Honold, P., 2000, "Culture and context: An empirical study for the development of a framework for the elicitation of cultural influence in product usage", Int. Journal of human-computer interaction, 12: (3-4) p. 327-345.
49. Horváth, I., 1996, "Morphological transition problems in product modelling: a survey", Proceedings of the international symposium on the tools and methods for concurrent engineering, Budapest, pp. 130-147.
50. Horváth, I., Vergeest, J.S.M., Kuczogi, G., 1998, "Development and application of design concept ontologies for contextual conceptualization", ASME Design Engineering Technical Conferences 1998.
51. Hubka, V., 1973, "Theorie der Maschinensysteme-Grundlagen einer wissenschaftlichen Konstruktionslehre", Berlin: Springer Verlag.
52. Hubka, V., Eder, W.E., 1988, "Theory of technical systems (English translation from German)", Berlin: Springer Verlag.
53. Hughes, R.E., An, K-N., 1999, "Biomechanical models of the hand, wrist and elbow in ergonomics", In: Kumar, S. (Ed.): Biomechanics in ergonomics, pp. 179-198. London: Taylor & Francis Ltd.
54. Hummel, A., Girod, B., 1997, "Fast dynamic simulation of flexible and rigid bodies with kinematic constraints", Proceedings of ACM VRST 1997.
55. Huston, R.L., Passarello, C.E., 1982, "The mechanics of human body motion (due to impulsive forces during occupational manoevres and jumping)", In: Ghista, D.N. (Ed.): Human body dynamics: impact, occupational and athletic aspects. Oxford: Clarendon Press.
56. Ishibuchi, H., Nii, M., 2000, "Neural networks for soft decision making", Fuzzy Sets and Systems 115, pp. 121-140.
57. Janhager, J., 2001, "An approach to design for use", In: Culley, S., Duffy, A., McMahon, C., Wallace, K. (Eds.): Design methods for performance and sustainability, Proceedings of ICED 2001 Glasgow, pp. 315-322. London: Professional Engineering Publishing.
58. Jansson, J., Vergeest, J.S.M., 2000, "A General Mechanics Model for Systems of Deformable Solids", Proceedings of TMCE 2000.
59. Job, H.M., Keating, D., Evans, A.L., Parks, S., 1999, "Three-dimensional electromagnetic model of the human eye: advances towards the optimisation of electroretinographic signal detection", Medical & Biological Engineering & Computing Vol. 37, pp. 710-719.
60. Jordan, P.W., 1998, "Human factors for pleasue in product use", Applied ergonomics Vol. 29, pp. 25-33.
61. Jung, E.E., Kang, D., 1995, "An object-oriented anthropometric database for developing a man model", Int. J. of Industrial Ergonomics 15, pp. 103-110.
62. Jung, M-R., Badler, N., Noman, T., 1994, "Animated human agents with motion planning capability for 3D-space postural goals", Journal of Visualization and Computer Animation, Vol. 8, pp. 225-246
63. Kanis, H., 1998, "Usage centred research for everyday product design", Applied Ergonomics Vol. 29, no. 1, pp. 75-82.
64. Kärkkäinen, H., Piippo, P., Tuominen, M., 2001, "Ten tools for customer-driven product development in industrial companies", International journal of production ergonomics, Vol. 69 p. 161-167.
65. Keinonen, T., 1998, "Usability of artifacts", in: Keinonen, T., One-dimensional usability-influence of usability on customers’ product preference. Helsinki: UIAH.
66. Kelso, J.A.S. (ed.)., 1982, "Human motor behavior-an introduction", Human motor behavior-an introduction. Hinsdale, NJ: Lawrence Erlbaum Associates.
67. Kim, J., Hemami, H., 1998, "Coordinated three-dimensional motion of the head and torso by dynamic neural networks", IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, Vol. 28, No. 5, pp. 653-666.
68. Kim, S.J., Kim, W.D., 1994, "A progressive damage modeling based on the continuum damage mechanics and its finite-element analysis", Journal of Applied Mechanics-Transactions of the ASME 61 (1), pp. 45-53.
69. Kingma, I., Toussaint, H.M., De Looze, M.P., Van Dieen, J.H., 1995, "Segment inertial parameter evaluation in two anthropometric models by application of a dynamic linked segment model", J. Biomechanics, Vol. 29, No. 5, pp. 693-704.
70. Kirwan, B., Ainsworth, L.K., 1992, "A guide to task analysis", London: Taylor & Francis Ltd.
71. Koch, R.M., Gross, M.H., Bosshard, A.A., 1998, "Emotion editing using finite elements", Eurographics, Vol. 17, No. 3, pp. 295-302.
72. Li, L., 1999, "Action theory and cognitive psychology in industrial design: user models and user interfaces", Braunschweig: Art Univ. of Braunschweig, dissertation.
73. Mah, S., Calvert, T.W., Havens, W., 1994, "A constraint-based reasoning framework for behavioural animation", Computer Graphics Forum, 13 (3), pp. 315-324.
74. Mahoney, D.P., 2000, "Multiphysics analysis", Computer Graphics World, 23 (6), pp. 44-46, 50, 52.
75. Manser, M.H. (Ed.)., 1997, "Bloomsbury Good Word Guide", London: Bloomsbury Publishing, Ltd.
76. Margolin, V., 1997, "Getting to know the user", Design Studies Vol. 18, pp. 227-236.
77. Margolis, D., Shim, T., 2000, "A bond graph model incorporating sensors, actuators and vehicle dynamics for developing controllers for vehicle systems", Journal of the Franklin Institute, Vol. 338, pp. 21-34.
78. Martens, D., 1998, "Neural networks as a tool for the assessment of human pilot behaviour in wind shear", Aerospace science and technology, 199, no. 1, pp. 39-48.
79. Masini, R., Padovani, E., Ricotti, M.E., Zio, E., 1998, "Dynamic simulation of a steam generator by neural networks", Nuclear Engineering and Design, 187, pp. 197-213.
80. McDonald, J., 2001, "On flexible body approximations of rigid body dynamics", Proc. of WSCG 2001, page numbers unknown.
81. Miles. L.D., 1961, "Techniques of value analysis and engineering", New York: McGraw-Hill book company, inc.
82. Miller, J.G., 1978, "Living systems", New York: McGraw-Hill book company, inc.
83. Mizoguchi, R., Kitamura, Y., 2001, "Foundation of knowledge systemization: role of ontological engineering", in: Roy, R. (Ed.): Industrial knowledge management-a micro-level approach. London: Springer.
84. Moes, C.C.M., 2000, "Geometric model of the human body", Proceedings of TMCE 2000.
85. Murdoch, T., 1995, "A layered framework for structuring product data", in: Tichem, M. et al. (Eds.): Proceedings of the WDK Workshop on Product Structuring. Delft: Delft University of Technology.
86. Nijhuis, W., 1984, "Ergonomics-one of the disciplines in product development", In: Contemporary Ergonomics 1984-Proceedings of EASC (Ed. E.D. Megaw). London: Taylor & Francis.
87. Otto, K.N., 1996, "Forming product design specifications", Proceedings of the 1996 ASME Design Engineering Technical Conferences and Design Theory and Methodology Conference.
88. Otto, K.N, Wood, K.L., 1999, "Customer integrated systematic design", Transactions of the SDPS, Journal of integrated design and process science, vol. 3, no. 4, pp. 61-74.
89. Paghini, U., Fargnoli, M., Geraci, D., 2001, "A design procedure for the safety of mechanical systems", In: Culley, S., Duffy, A., McMahon, C., Wallace, K. (Eds.): Design methods for performance and sustainability, Proceedings of ICED 2001 Glasgow, pp. 11-18. London: Professional Engineering Publishing.
90. Pahl, G., Beitz, W., 1988, "Engineering Design-a systematic approach (English translation from German)", London: The Design Council.
91. Pahng, G.F., Ha, S., Park, S., 1999, "A design knowledge management framework for active design support", Proceedings of DETC99.
92. Park, J., Fussell, D.S., 1997, "Forward dynamics based realistic animation of rigid bodies", Computers and Graphics, vol. 21, No. 4, pp. 483-496).
93. Parsons, K.C., 2000, "Environmental ergonomics: a review of principles, methods and models", Applied Ergonomics Vol. 31, pp. 581-594.
94. Pop, C., Khajepour, A., Huisson, J.P., Patla, A.E., 1999, "Application of Bondgraphs to Human Locomotion Modeling", Proceeding of the HKK Conference and Symposium, University of Waterloo, Canada June 13-16, pp. 85-90, http://melad.uwaterloo.ca/students/cpop/HKK_paper.pdf.
95. Porcher Nedel, L., Thalmann, D., 2000, "Anatomic modeling of deformable human bodies", The Visual Computer Vol. 16, pp. 306-321.
96. Powers, W.T., 1999a, "A model of kinesthetically and visually controlled arm movement", Int. J. Human-Computer Studies (1999) 50, pp. 463-479.
97. Powers, W.T., 1999b, "An experiment with a simple method for controlling an inverted pendulum", Journal on perceptual control theory, Vol. 1 No. 1, pp. 3-12.
98. Provot, X., 1995, "Deformation Constraints in a Mass-Spring Model to Describe Rigid Cloth Behavior", Proceedings Graphics Interface '95, pp.147-154.
99. Rasmussen, J., 1986, "Information processing and human-machine interaction", New York: North-Holland.
100. Redfield, R.C., Krishnan, S., 1992, "Towards automated conceptual design of physical dynamic systems", Journal of engineering design, Vol, 3, No. 3, 1992, pp. 187-204.
101. Riley, K.F., Hobson, M.P., Bence, S.J., 1997, "Mathematical methods for physics and engineering", Cambridge: Cambridge Press.
102. Rodenacker, W.G., 1991, "Methodisches Konstruieren", Berlin: Springer Verlag.
103. Rooden, M.J., 2001, "Design models for anticipating future usage", Delft: Delft University University of Technology. Dissertation.
104. Roozenburg, N, Eekels, J., 1995, "Product design: fundamentals and methods", Chichester: John Wiley & sons.
105. Roth, K., 1982, "Konstruieren mit Konstruktionskatalogen", Berlin: Springer Verlag.
106. Rusák, Z., Horváth, I., 2002, "A study of shape modeling techniques with a view to conceptual design of artifacts", Article submitted for Journal of Computing and Information Science in Engineering.
107. Saiedan, H., Dale, R., 1999, "Requirements engineering: making the connection between the software developer and the customer", Information and software technology Vol. 42, pp. 419-428.
108. Sanders, M.S., 1988, "Human factors definition revisited", In: Christensen, J.M., Topmiller, D.A., Gill, R.T. (Eds.): Human factors society bulletin, 31, pp. 7-8.
109. Saran, M.J., Wagoner, R.H., 1991, "A consistent implicit formulation for nonlinear finite-element modeling with contact and friction. 1. Theory", Journal of applied Mechanics-Transactions of the ASME 58 (2), pp. 499-506.
110. Setiono, R., Leow, W.K., 1999, "On mapping decision trees and neural networks", Knowledge-Based Systems 12, pp. 95-99.
111. Shah, J.J., Mäntylä, M., 1995, "Parametric and feature-based CAD/CAM", New York: John Wiley & Sons, Inc.
112. Sloan, G.D., Talbott, P.E., 1996, "Forensic application of computer simulation of falls", Journal of Forensic Science 41(5), pp. 782-785.
113. Smith, R.P., Morrow, J.A., 1999, "Product development process modeling", Design Studies 20 (1999) 237-261.
114. Suto, H., Kawakami, H., Katai, O., Horiuchi, T., 2000, "Hierarchical modeling of artifacts based on interaction with humans and the environment", Proceedings of EDA 2000 Conference, Orlando, Florida.
115. Terzopoulos, D., Platt, J., Barr, A., Fleischer, K., 1987, "Elastically deformable models", Computer Graphics, Vol. 21, No. 4, pp. 205-214.
116. Theodoridis, S., Koutroumbas., 1998, "Pattern reecognition", London: Academic Press.
117. Therrien, R.G., Bourassa, P.A., 1982, "Mechanics application to sports equipment: protective helmets, hockey sticks, and jogging shoes", In: Ghista, D.N. (Ed.): Human body dynamics: impact, occupational and athletic aspects. Oxford: Clarendon Press.
118. Ulrich, K.T., Eppinger, D.D., 2000, "Product design and development-second edition", New York: McGraw-Hill book company, inc.
119. United Nations., 1988, "Classification by Broad Economic Categories Defined in Terms of SITC, Rev.3-Introduction", In: Eurostat: http://europa.eu.int/comm/eurostat/ramon/intro_bec/en.html (read May 29., 2001).
120. Vairaktarakis, G.L., 1999, "Optimization tools for design and marketing of new/improved products using the house of quality", Journal of operations management, Vol. 17, pp. 645-663.
121. Van der Vegte, W.F., 2000, "Reflections on artifact related process modeling", Proceedings of EDIProD 2000.
122. Van der Vegte, W.F., Pulles, J.P.W., Vergeest, J.S.M., 2001a, "Towards computer supported inclusion and integration of life cycle processes in product conceptualization based on the process tree", Automation in Construction 10/6, pp. 731-740.
123. Van der Vegte, W.F., Vergeest, J.S.M., Horváth, I., 2001b, "Towards a unified description of product related processes", Journal of Integrated Design and Process Science, Vol. 5, No 2, pp. 53-63.
124. Van Welie, M., Van der Veer, G.C., 2000, "Structured methods and creativity: a happy Dutch marriage", Proceedings of Co-designing 2000.
125. Wallace, D.R., Jakiela, M.J., 1993, "Automated product concept design: unifying aesthetics and engineering", IEEE Computer graphics and applications, July 1993, pp. 66-75.
126. Warell, A.V., 1999, "Introducing a use perspective in product design theory and methodology", Proceedings of DETC99.
127. Weegels, M., Kanis, H., 2000, "Risk perception in consumer product use", Accident analysis and prevention Vol. 32, pp. 365-370.
128. Wiklund, M.E (Ed.)., 1994, "Usability in practice-How companies develop user-friendly products", Boston: AP Professional.
129. Williams, M.A., Medland, A.J., 2001, "The creation of techniques for the design of machines compatible with human posture", In: Culley, S., Duffy, A., McMahon, C., Wallace, K. (Eds.): Design methods for performance and sustainability, Proceedings of ICED 2001 Glasgow, pp. 347-354. London: Professional Engineering Publishing.
130. Yeo, A., Barbour, R., Apperley, M, 1998, "Cultural influence in usability assessment", Contemporary ergonomics-proceedings of ESAC, pp. 274-278.
131. Yoshioka, M., Oosaki, M., Tomiyama, T., 1997, "An application of quality function deployment to functional modeling in a knowledge intensive design environment", Publications April 1997-March 1998, Tomiyama and Umeda Laboratories, Graduate school of Engineering, The University of Tokyo, pp. 53-67.
132. Zeid, A.A., Overholt, J.L., 1995, "Singularly perturbed formulation: explicit modeling of multibody systems", Journal of the Franklin Institute, Vol. 332B No. 1, pp. 21-45.
133. Zienkiewicz, O.C, Taylor, R.L., 2000, "The finite element method", Vol. 1,2,3, Oxford: Butterworth-Heinemann, 2000.
134. Zienkiewicz, O.C., Hollister, G.S. (Eds), 1965, "Stress analysis, recent developments in numerical and experimental methods", New York: Wiley, 1965.
135. Zimmermann, C.M., Bridger, R.S., 2000, "Effects of dialogue design on automatic teller machine (ATM) usability: transaction times and card loss", Behaviour & Information Technology, vol. 19 no. 6, pp. 441-449.