Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour

International Materials Reviews

Volumn 42, Issue 3, 1997, Pages 85-116

  Suresh, S ^a   Mortensen, A ^b  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b EPFL   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

CERMETS; COMPOSITE MICROMECHANICS; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); MATHEMATICAL MODELS; MULTILAYERS; PLASTIC DEFORMATION; PLASTICITY; RESIDUAL STRESSES; THERMAL GRADIENTS; THERMAL STRESS; THERMOELASTICITY; BONDING; CERAMIC MATERIALS; CRYSTALS;

CRYSTAL PLASTICITY THEORY; DISCRETE DISLOCATION MODELS; FUNCTIONALLY GRADED METALS; THERMOPLASTICITY; FREE SURFACE; INTERNAL STRESS; MEAN FIELD THEORY;

BUILDING MATERIALS; METALLIC MATRIX COMPOSITES;

EID: 0031284316     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/imr.1997.42.3.85     Document Type: Review

References (190)

1. A. MORTENSEN and S. SURESH: Int. Mater. Rev., 1995, 40, 239-265.
2. M. YAMANOUCHI, M. KOIZUMI, T. HIRAI, and I. SHIOTA (Eds): Proc. 1st Int. Symp. on 'Functionally gradient materials', Sendai, Japan, 1990, Functionally Graded Materials Forum and the Society of Non-Traditional Technology.
3. R. KUDESIA, S. NIEDZIALEK, G. STANGLE, J. W. McCAULEY, R. M. SPRIGGS, and Y. KAIEDA: Ceram. Eng. Sci. Proc., 1992, 13, 392-409.
4. S. SURESH, A. MORTENSEN, and H. McMANUS (Eds): MIT-ONR Workshop on 'Functionally graded structural materials', Cambridge, MA, 1994; Materials Processing Center; Cambridge, MA, Massachusetts Institute of Technology.
5. B. ILSCHNER and N. CHERRADI (Eds): 3rd Int. Symp. on 'Structural and functional gradient materials', Lausanne, Switzerland, 1994; Lausanne, Presses Polytechniques et Universitaires Romandes.
6. B. H. RABIN and I. SHIOTA (Eds): 'Functionally graded materials' (Special issue), MRS Bull., 1995, 20, (1).
7. M.-J. PINDERA, J. ABOUDI, S. M. ARNOLD, and W. F. JONES (Eds): 'Use of composites in multi-phased and functionally graded materials' (Special issue), Compos. Eng., 1995, 5, 743-974.
8. A. NEEDLEMAN and S. SURESH (Eds): 'Mechanics and physics of layered and graded materials (Special issue) J. Mech. Phys. Solids, 1996, 44, 643-825.
9. Y. MATZUSAKI: Doctoral thesis, Kyoto University, Japan, 1994.
10. Proc. of 4th Int. Symp. on 'Functionally graded materials', Tsukuba City, Japan; 1996, Tokyo, Functionally Graded Materials Forum, in press.
11. A. J. MARKWORTH, K. S. RAMESH, and W. P. PARKS, Jr: J. Mater. Sci., 1995, 30, 2183-2193.
12. T. HIRAI: in 'Processing of ceramics, Part 2: Materials science and technology, a comprehensive treatment', (ed. R. W. Cahn et al.), Vol. 17B, 293-341, 1996; Weinheim, Germany, VCH Verlagsgesellschaft mbH.
13. J. B. HOLT, M. KOIZUMI, T. HIRAI, and Z. A. MUNIR (Eds): Proc. 2nd Int. Symp. on 'Functionally gradient materials', San Francisco, CA, Nov. 1992, Ceramic Transactions, Vol. 34; 1993, Westerville, OH, The American Ceramic Society.
14. M. KOIZUMI: Ceram. Eng. Sci. Proc., 1992, 13, 333-346.
15. R. L. WILLIAMSON, B. H. RABIN, and J. T. DRAKE: J. Appl. Phys., 1993, 74, 1310-1320.
16. J. T. DRAKE, R. L. WILLIAMSON, and B. H. RABIN: J. Appl. Phys., 1993, 74, 1321-1336.
17. S. SURESH, A. E. GIANNAKOPOULOS, and M. OLSSON: J. Mech. Phys. Solids, 1994, 42, 979-1018.
18. A. E. GIANNAKOPOULOS, S. SURESH, M. FINOT, and M. OLSSON: Acta Metall Mater., 1995, 43, 1335-1354.
19. M. FINOT, S. SURESH, C. BULL, and S. SAMPATH: Mater. Sci. Eng., 1996, 205A, 59-71.
20. K. S. RAVICHANDRAN: Mater. Sci. Eng., 1995, A201, 269-278.
21. J. ABOUDI, M.-J. PINDERA, and S. M. ARNOLD: Int. J. Solids Struct., 1994, 31, 1393-1428.
22. L. B. FREUND: J. Mech. Phys. Solids, 1996, 44, 723-736.
23. L. B. FREUND: J. Cryst. Growth, 1993, 132, 341-344.
24. F. ERDOGAN: Compos. Eng., 1995, 5, 753-770.
25. S. SAMPATH, H. HERMAN, N. SHIMODA, and T. SAITO: MRS Bull., 1995, 20, 27-31.
26. E. A. FITZGERALD, Y.-H. XIE, D. MONROE, P. J. SILVERMAN, J.-M. KUO, A. R. KORTAN, F. A. THIEL, B. E. WEIR, and L. C. FELDMAN: J. Vac. Sci. Technol. B, 1992, 10, 1807-1819.
27. Y. D. LEE and F. ERDOGAN: 'Fracture of functionally graded materials', Report no. F49620-93-1-0252, 1994, Bethlehem, PA, Lehigh University.
28. Y. YANG and D. MUNZ: in 'Fracture mechanics', (ed. W. G. Reuter et al.), STP 1256; 1997, Philadelphia, PA, American Society for Testing and Materials, in press.
29. A. S. KIM, S. SURESH, and C. F. SHIH: Int. J. Solids Struct., 1997, in press.
30. B. BEARDSLEY: in Proc. of Workshop on 'Coatings for advanced engines', Castine, ME, 1990, (ed. E. W. Gregory and E. E. Wells), US Department of Energy, Washington, DC, USA, II-53-II-56.
31. R. C. NOVAK, A. P. MATARESE, R. P. HUSTON, A. J. SCHARMAN, and T. M. YONUSHONIS: Mater. Manuf. Proc., 1992, 7, 15-30.
32. A. E. GIANNAKOPOULOS and S. SURESH: Int. J. Solids Struct., 1997, 34, (19), 2357-2428.
33. S. SURESH, A. E. GIANNAKOPOULOS, and J. ALCALA: Acta Metall. Mater., 1997, 45, (5), 1307-1321.
34. O. JØRGENSEN, A. E. GIANNAKOPOULOS, and S. SURESH: Int. J. Solids Struct., 1997, in press.
35. D. HULL and T. W. CLYNE: 'An introduction to composite materials', 2nd edn; 1996, Cambridge, Cambridge University Press.
36. K. K. CHAWLA: 'Introduction to composites'; 1992, Berlin, Springer-Verlag.
37. T. W. CLYNE and P. J. WITHERS: 'An introduction to metal matrix composites'; 1993, Cambridge, Cambridge University Press.
38. T. MURA: 'Micromechanics of defects in solids'; 1987, The Hague, The Netherlands, Nijhoff.
39. M. TAYA and R. J. ARSENAULT: 'Metal matrix composites: Thermomechanical behaviour'; 1989; Oxford, Pergamon Press.
40. A. KELLY: 'Strong solids'; 1966, Oxford, Oxford University Press.
41. S. SURESH, A. MORTENSEN, and A. NEEDLEMAN (Eds): 'Fundamentals of metal matrix composites'; 1993, Stoneham, MA, Butterworth-Heinemann.
42. J. D. EMBURY and J. L. DUNCAN: J. Met., 1982, 34, (4), 24-29.
43. W. VOIGHT: 'Lehrbuch der Kristallphysik'; 1928, Stuttgart, Germany, B. G. Teubner.
44. A. REUSS: Z. ang. Math. Mech., 1929, 9, 49-54.
45. R. HILL: J. Mech. Phys. Solids, 1963, 11, 357-372.
46. J. C. HALPIN and S. W. TSAI: 'Details of composites' Report AFML-TR-67-423, 1967, Dayton, OH, Air Force Materials Laboratory.
47. Y. TOMOTA, K. KUKORI, T. MORI, and I. TAMURA: Mater. Sci. Eng., 1976, 24, 85-91.
48. K. CHO and J. GURLAND: Metall. Trans., 1988, 19A, 2027-2040.
49. H. FISCHMEISTER and B. KARLSSON: Z. Metallk., 1977, 68, 311-327.
50. S. ANKEM and H. MARGOLIN: Metall. Trans., 1986, 17A, 2209-2223.
51. H. L. COX: Br. J. Appl. Phys., 1952, 3, 73-79.
52. V. C. NARDONE and K. M. PREWO: Scr. Metall., 1986, 20, 43-48.
53. T. W. CLYNE: Mater. Sci. Eng., 1989, A122, 183-192.
54. H. J. BOHM: 'Thermoelastic deformation of composites', Report 108, Vienna, Austria, The Christian Doppler Laboratory, 1994.
55. O. B. PEDERSEN: Z. ang. Math. Mech., 1978, 58, 227-228.
56. O. B. PEDERSEN: Acta Metall., 1983, 31, 1795-1808.
57. R. HILL: J. Mech. Phys. Solids, 1965, 13, 213-222.
58. Y. BENVENISTE and G. J. DVORAK: in 'Micromechanics and inhomogeneity', (ed. G. J. Weng et al.), 65-82, 1990; New York, Springer-Verlag.
59. G. J. DVORAK and Y. BENVENISTE: Proc. R. Soc., 1992, A437, 291-310.
60. Y. BENVENISTE, G. J. DVORAK, and T. CHEN: J. Mech. Phys. Solids, 1991, 39, 927-946.
61. J. D. ESHELBY: Proc. R. Soc., 1957, A241, 376-396.
62. J. D. ESHELBY: in 'Progress in solid mechanics', (ed. I. N. Sneddon and R. Hill), 89-140; 1961, New York, Pergamon Press.
63. L. M. BROWN and W. M. STOBBS: Philos. Mag., 1971, 23, 1185-1199.
64. T. MORI and K. TANAKA: Acta Metall., 1973, 21, 571-574.
65. Y. BENVENISTE: Mech. Mater., 1987, 6, 147-157.
66. G. P. TANDON and G. J. WENG: Polym. Compos., 1984, 5, 327-333.
67. K. WAKASHIMA, H. TSUKAMOTO, and B. H. CHOI: in 'The Korea-Japan metals symp. on composite materials', 1988, 102-115; Seoul, The Korean Institute of Metals.
68. K. WAKASHIMA and H. TSUKAMOTO: in Proc. 1st Int. Conf. on 'Functionally gradient materials', (ed. M. Yamanouchi et al.), 19-26; 1990, Tokyo, FGM Forum.
69. J. D. ATKINSON, L. M. BROWN, and W. M. STOBBS: Philos. Mag., 1974, 26, 1247-1280.
70. L. M. BROWN and D. R. CLARKE: Acta Metall., 1977, 25, 563-570.
71. H. LILHOLT: Acta Metall., 1977, 25, 571-585.
72. O. B. PEDERSEN: Acta Metall., 1990, 38, 1201-1219.
73. P. J. WITHERS, W. M. STOBBS, and O. PEDERSEN: Acta Metall., 1989, 37, 3061-3084.
74. J. ABOUDI: Appl. Mech. Rev., 1989, 42, 193-221.
75. S. NEMAT-NASSER, T. IWAKUMA, and M. HEJAZI: Mech. Mater., 1982, 1, 239-267.
76. T. CHRISTMAN, A. NEEDLEMAN, and S. SURESH: Acta Metall., 1989, 37, 3029-3050.
77. V. TVERGAARD: Acta Metall. Mater., 1990, 38, 185-196.
78. G. BAO, R. M. McMEEKING, and J. W. HUTCHINSON: Acta Metall. Mater., 1991, 39, 1871-1882.
79. J. LLORCA, A. NEEDLEMAN, and S. SURESH: Acta Metall. Mater., 1991, 39, 2317-2335.
80. A. LEVY and J. M. PAPAZIAN: Metall. Trans., 1991, 22A, 411-420.
81. Y.-L. SHEN, M. FINOT, A. NEEDLEMAN, and S. SURESH: Acta Metall. Mater., 1994, 42, 77-97.
82. Y.-L. SHEN, M. FINOT, A. NEEDLEMAN, and S. SURESH: Acta Metall. Mater., 1995, 43, 1701-1722.
83. J. R. BROCKENBROUGH, S. SURESH, and H. A. WIENECKE: Acta Metall. Mater., 1991, 39, 725-752.
84. C. L. HOM: J. Mech. Phys. Solids, 1992, 40, 991-1008.
85. M. B. BUSH: Mater. Sci. Eng., 1992, A154, 139-152.
86. M. FINOT, Y.-L. SHEN, A. NEEDLEMAN, and S. SURESH: Metall. Mater. Trans, 1994, 25A, 2403-2420.
87. R. M. CHRISTENSEN: 'Mechanics of composite materials'; 1979, New York, Wiley.
88. Z. HASHIN and S. SHTRIKMAN: J. Mech. Phys. Solids, 1962, 10, 335-342.
89. E. KRONER: Z. Phys., 1958, 151, 504-509.
90. B. BUDIANSKY: J. Mech. Phys. Solids, 1965, 13, 223-238.
91. Y.-L. SHEN, A. NEEDLEMAN, and S. SURESH: Metall. Mater. Trans., 1994, 25A, 839-850.
92. J. W. HUTCHINSON and R. M. MCMEEKING: in 'Micromechanics of defects in solids', (ed. S. Suresh et al.), Chap. 9, 158-173; 1993, Boston, MA, Butterworth - Heinemann.
93. S. SURESH and J. R. BROCKENBROUGH: in 'Micromechanics of defects in solids', (ed. S. Suresh et al.), Chap. 10, 174-190; 1993, Boston, MA, Butterworth - Heinemann.
94. T. NAKAMURA and S. SURESH: Acta Metall Mater., 1993, 41, 1665-1681.
95. H. J. BOHM and F. G. RAMMERSTORFER: Mater. Sci. Eng., 1991, A135, 185-190.
96. E. WEISSENBEK and F. G. RAMMERSTORFER: Acta Metall. Mater., 1993, 41, 2833-2843.
97. T. SIEGMUND, E. WERNER, and F. D. FISCHER: J. Mech. Phys. Solids, 1995, 43, 495-515.
98. M. H. POECH, H. F. FISCHMEISTER, D. KAUTE, and S. SCHMAUDER: Compos. Mater. Sci., 1993, 1, 213-230.
99. J. TEPLY and G. J. DVORAK: J. Mech. Phys. Solids, 1988, 36, 29-58.
100. W. J. POOLE, J. D. EMBURY, S. MacEWEN, and U. F. KOCKS: Philos. Mag., 1994, 69, 645-665.
101. W. J. POOLE, J. D. EMBURY, S. MacEWEN, and U. F. KOCKS: Philos. Mag., 1994, 69, 667-687.
102. A. K. VASUDEVAN, O. RICHMOND, F. ZOK, and J. D. EMBURY: Mater. Sci. Eng., 1989, A107, 63-69.
103. J. J. LEWANDOWSKI, C. LIU, and w. HUNT: Mater. Sci. Eng., 1989, A107, 241-255.
104. A. NEEDLEMAN, S. R. NUTT, S. SURESH, and V. TVERGAARD: in 'Micromechanics of defects in solids', (ed. S. Suresh et al.), Chap. 13, 233-250; 1993, Boston, MA, Butterworth - Heinemann.
105. N. A. FLECK and J. W. HUTCHINSON: J. Mech. Phys. Solids, 1993, 41, 1825-1848.
106. G. I. TAYLOR: J. Inst. Met., 1938, 62, 307-324.
107. R. HILL and J. R. RICE: J. Mech. Phys. Solids, 1972, 20, 401-424.
108. R. J. ASARO and J. R. RICE: J. Mech. Phys. Solids, 1977, 25, 309-330.
109. R. J. ASARO: J. Appl. Mech., 1983, 50, 921-936.
110. D. PEIRCE, R. J. ASARO, and A. NEEDLEMAN: Acta Metall., 1983, 31, 1951-1968.
111. S. V. HARREN, H. DEVE, and R. J. ASARO: Acta Metall., 1988, 36, 2435-2455.
112. P. E. McHUGH, R. J. ASARO, and C. F. SHIH: Acta Metall. Mater., 1993, 41, 1461-1500.
113. A. NEEDLEMAN and V. TVERGAARD: J. Appl. Mech., 1993, 60, 70-76.
114. A.M. CUITINO and M. ORTIZ: Model. Simul Mater. Sci. Eng., 1992, 1, 225-250.
115. J. BASSANI: Adv. Appl. Mech., 1994, 30, 191-239.
116. H. H. M. CLEVERINGA, E. Van der GIESSEN, and A. NEEDLEMAN: Acta Metall Mater., 1997, in press.
117. E. Van der GIESSEN and A. NEEDLEMAN: Model. Simul. Mater. Sci. Eng., 1995, 3, 689-699.
118. D. C. DUNAND and A. MORTENSEN: Acta Metall. Mater., 1991, 39, 1405-1416.
119. E. EARHART and A. MORTENSEN: Unpublished results, MIT, Cambridge, MA, 1997.
120. S. P. TIMOSHENKO and S. WOINOWSKY-KRIEGER:'Theory of plates and shells'; 1959, New York, McGraw-Hill.
121. M. FINOT and S. SURESH: 'MultiTherm, Version 1.4, A personal computer software for the thermomechanical analysis of the layered and graded materials', Copyright The Massachusetts Institute of Technology, Cambridge, MA, 1994.
122. T. HIRANO, J. TERAKI, and T. YAMADA: in Proc. 1st Int. Symp. on 'Functionally gradient materials', Sendai, Japan, 1990, (ed. M. Yamanouchi et al.), Functionally Gradient Materials Forum and the Society of Non-Traditional Technology, 5-10.
123. T. HIRANO and K. WAKASHIMA: MRS Bull., 1995, 20, 40-42.
124. K. WAKASHIMA, M. OTSUKA, and S. UMEKAWA: J. Compos. Mater., 1974, 8, 391-400.
125. J. TERAKI, T. HIRANO, and K. WAKASHIMA: Ceram. Trans., 1993, 34, 67-74.
126. Y.-L. SHEN and S. SURESH: J. Mater. Res., 1995, 10, 1200-1215.
127. M. FINOT and S. SURESH: J. Mech. Phys. Solids, 1996, 44, 683-721.
128. B. H. RABIN, R. H. WILLIAMSON, and s. SURESH: MRS Bull., 1995, 20, 37-39.
129. M. FINOT, S. SURESH, C. BULL, and S. SAMPATH: in Proc. 3rd Int. Symp. on 'Structural and functional gradient materials', (ed. B. Ilschner and N. Cherradi), Lausanne, Switzerland, 223-228, 1994; Lausanne, Presses Polytechniques et Universitaires Romandes.
130. B. BOLEY and J. H. WEINER: Theory of thermal stresses'; 1960, New York, Wiley.
131. E. WEISSENBEK, H. PETTERMANN, and S. SURESH: Acta Metall. Mater., 1997, in press.
132. A. C. GAVAZZI and D. C. LAGOUDAS: Compos. Mech., 1990, 7, 13-20.
133. H. E. PETTERMANN, H. J. BOHM, and F. G. RAMMERSTORFER: In Proc. of 'General workshop in materials science and engineering', Sept.-Oct. 1996, (ed. M. Rappaz), European Commission, in press.
134. M. DAO, P. GU, A. MAEWAL, and R. J. ASARO: Acta Metall. Mater., 1997, in press.
135. J. ABOUDI: 'Mechanics of composite materials - a unified micromechanical approach', 1991, New York, Elsevier.
136. J. ABOUDI, M.-J. PINDERA, and s. M. ARNOLD: Compos. Eng., 1995, 5, 771-792.
137. I. C. NOYAN and J. COHEN: 'Residual stresses'; 1985, New York, Elsevier.
138. J. LU and M. R. JAMES (Eds): 'Handbook of measurement of residual stresses'; 1996, Lilburn, GA, Fairmount Press.
139. D. J. GREVING, E. F. RYBICKI, and J. R. SHADLEY: in Proc. 7th National Thermal Spray Conf., Boston, MA, 647-653; 1994, Thermal Spray Society.
140. P. BIALUCKI, W. KACZMAR, and J. GLADYSZ: in 'Advances in thermal spray processing', 837-842; 1986, New York, Pergamon Press.
141. M. K. HOBBS and H. REITER: in 'Advances in coatings technology', 285-290; 1988, Metals Park, OH, American Society for Metals.
142. S. C. GILL and T. W. CLYNE: Metall. Trans., 1990, 21B, 377-385.
143. T. W. CLYNE and S. C. GILL: J. Therm. Spray Technol., 1996, 5, 401-435.
144. C.-C. CHIU and E. D. CASE: Mater. Sci. Eng., 1991, A132, 39-50.
145. C.-C. CHIU: Mater. Sci. Eng., 1992, A150, 139-147.
146. T. P. WEIHS, S. HONG, J. C. DRAYMAN, and W. D. NIX: in 'Stresses in thin films', (ed. M. Doernen et al.), Mater. Res. Soc. Symp. Proc., 1989, 130, 87-92.
147. P. A. FLINN, D. S. GARDNER, and W. D. NIX: IEEE Trans. Electron Devices, 1987, 34, 689-696.
148. O. KESLER, M. FINOT, S. SURESH, and S. SAMPATH: Acta Metall. Mater., 1997, in press.
149. M. W. HYER: J. Compos. Mater., 1981, 15, 175-194.
150. M. W. HYER: J. Compos. Mater., 1982, 16, 318-340.
151. C. B. MASTERS and N. J. SALAMON: Int. J. Eng. Sci., 1993, 31, 915-925.
152. N. J. SALAMON and C. B. MASTERS: Int. J. Solids Struct., 1994, 32, 473-481.
153. G. G. STONEY: Proc. R. Soc., 1909, A82, 172-175.
154. V. L. HEIN and F. ERDOGAN: Int. J. Fract. Mech., 1971, 7, 317-330.
155. F. ERDOGAN: MRS Bull., 1995, 20, 43-44.
156. D. MUNZ and Y. Y. YANG: Int. J. Fract., 1993, 60, 169-177.
157. Y. ARAI, A. E. GIANNAKOPOULOS, and S. SURESH: Unpublished results, MIT, Cambridge, MA, 1997.
158. R. L. WILLIAMSON, B. H. RABIN, and G. E. BYERLY: Compos. Eng., 1995, 5, 851-863.
159. R. L. WILLIAMSON and B. H. RABIN: Ceram. Trans., 1993, 34, 55-65.
160. M. L. KANNINEN and K. POPELAR: 'Advanced fracture mechanics'; 1985; Oxford, Oxford University Press.
161. N. KONDA and F. ERDOGAN: Eng. Fract. Mech., 1994, 47, 533-545.
162. F. ERDOGAN: J. Appl. Mech. (Trans. ASME), 1985, 52, 823-828.
163. F. DELALE and F. ERDOGAN: J. Appl Mech. (Trans. ASME), 1983, 50, 609-614.
164. F. DELALE and F. ERDOGAN: J. Appl. Mech. (Trans. ASME), 1988, 55, 317-324.
165. F. ERDOGAN, A. C. KAYA, and P. F. JOSEPH: J. Appl. Mech. (Trans. ASME), 1991, 58, 400-418.
166. F. KROUPA, Z. KNESL, and J. VALACH: Acta Tech. ČSAV, 1993, 38, 29-74.
167. Y. R. TAKEUCHI and K. KOKINI: J. Eng. Gas Turbines Power (Trans. ASME), 1994, 116, 266-271.
168. K. KOKINI and Y. R. TAKEUCHI: in 'Fracture mechanics' (ed. F. Erdogan and R. J. Hartranft), STP 1220, 249-263; 1995, Philadelphia, PA, American Society for Testing and Materials.
169. R. A. MILLER and C. C. BRENDT: Thin Solid Films, 1984, 119, 195-202.
170. R. C. BRINK: J. Eng. Gas Turbines Power (Trans. ASME), 1989, 111, 570-577.
171. T. R. GURNEY: 'Fatigue of welded structures'; 1968, Cambridge, Cambridge University Press.
172. W. CHENG, H. S. CHENG, T. MURA, and L. M. KEER: J. Tribology (Trans. ASME), 1994, 116, 2-8.
173. K. L. JOHNSON: 'Contact mechanics'; 1985, Cambridge, Cambridge University Press.
174. A. KLEEMANN: 'Literature review of contact fatigue, Part II: Calculation models', Report no. IM-3224, Swedish Institute for Metal Research, Stockholm 1993.
175. S. SURESH, Y. SUGIMURA, and E. K. TSCHEGG: Scr. Metall. Mater., 1992, 27, 1189-1194.
176. S. SURESH, Y. SUGIMURA, and T. OGAWA: Scr. Metall. Mater., 1993, 29, 237-242.
177. Y. SUGIMURA, P. G. LIM, C. F. SHIH, and S. SURESH: Acta Metall. Mater., 1995, 43, 1157-1169.
178. Y. SUGIMURA, L. GRONDIN, and S. SURESU: Scr. Metall. Mater., 1995, 33, 2007-2012.
179. J. R. RICE: J. Appl. Mech. (Trans. ASME), 1968, 35, 379-386.
180. A. S. KIM: Doctoral thesis, Brown University, Providence, RI, USA, 1996.
181. A. ROMEO and R. BALLARINI: J. Appl. Mech. (Trans. ASME), in press.
182. M. Y. HE and J. W. HUTCHINSON: Int. J. Solids Struct., 1989, 25, 1053-1069.
183. J. W. HUTCHINSON and Z. SUO: Adv. Appl. Mech., 1992, 29, 63-191.
184. M. Y. HE, P. STAHLE, C. F. SHIH, N. T. ZHANG, and R. M. McMEEKING: Unpublished results, University of California, Santa Barbara, CA, 1996.
185. A. R. ZAK and M. L. WILLIAMS: J. Appl. Mech. (Trans. ASME), 1963, 30, 142-143.
186. F. ERDOGAN and V. BIRICIKOGLU: Int. J. Eng. Sci., 1973, 11, 745-766.
187. J. L. BEUTH, Jr: Int. J. Solids Struct., 1992, 29, 1057-1069.
188. K. TOKAJI, T. OGAWA, H. SHIBATA, and Y. KAMIYA: Trans. Jpn Soc. Mech. Eng., 1991, 57, 2293-2296 (in Japanese).
189. S. SURESH: 'Fatigue of materials'; 1991, Cambridge, Cambridge University Press.
190. J. D. EMBURY, L. B. FREUND, A. NEEDLEMAN, C. F. SHIH, F. SPAEPEN, and S. SURESH: J. Mech. Phys. Solids, 1996, 44, 823-825.