An investigation on the dispersibility of carbon nanotube in the latex nanocomposites using rheological properties

Composites Part B: Engineering

Volumn 56, Issue , 2014, Pages 149-156

  Alimardani, Mohammad ^a   Abbassi Sourki, Foroud ^a   Bakhshandeh, Gholam Reza ^a  

^a IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

Author keywords

A. Polymer matrix composites (PMCs); B. Microstructures; B. Rheological properties; Carboxylated styrene butadiene rubber (XSBR)

Indexed keywords

CARBOXYLATED LATEX; CARBOXYLATED STYRENE BUTADIENE RUBBERS; COLLOIDAL STABILITY; DISPERSIBILITIES; HYDROXYL FUNCTIONALITY; POLYMER MATRIX COMPOSITES (PMCS); RHEOLOGICAL PROPERTY; ULTRA-SONICATION;

AGGLOMERATION; BALL MILLING; DISPERSIONS; DYNAMIC LIGHT SCATTERING; INFRARED SPECTROSCOPY; MILLING (MACHINING); MULTIWALLED CARBON NANOTUBES (MWCN); NANOCOMPOSITES; POLYMER MATRIX COMPOSITES; RHEOLOGY; STYRENE;

LATEXES;

EID: 84883746625     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2013.08.031     Document Type: Article

References (41)

1. J.N. Coleman, U. Khan, W.J. Blau, and Y.K. Gun'ko Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites Carbon 44 9 2006 1624 1652
2. M. Rahmat, and P. Hubert Carbon nanotube-polymer interactions in nanocomposites: a review Compos Sci Technol 72 1 2011 72 84
3. P.-C. Ma, N.A. Siddiqui, G. Marom, and J.-K. Kim Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review Compos A Appl Sci Manuf 41 10 2010 1345 1367
4. L. Vaisman, H.D. Wagner, and G. Marom The role of surfactants in dispersion of carbon nanotubes Adv Colloid Interface Sci. 128 2006 37 46 (Pubitemid 46215538)
5. Bonadies I, Avella M, Avolio R, Carfagna C, Gentile G, Immirzi B, et al. Probing the effect of high energy ball milling on PVC through a multitechnique approach. Polym Test. 2011.
6. R.A. Varin, T. Czujko, and Z.S. Wronski Nanomaterials for solid state hydrogen storage 2009 Springer London, Limited
7. L. Vertuccio, G. Gorrasi, A. Sorrentino, and V. Vittoria Nano clay reinforced PCL/starch blends obtained by high energy ball milling Carbohydr Polym 75 1 2009 172 179
8. J. Font, J. Muntasell, and E. Cesari Poly (butylene terephthalate) poly (ethylene terephthalate) mixtures formed by ball milling Mater Res Bull 34 1 1999 157 165
9. C.M. Koo, H.T. Ham, M.H. Choi, S.O. Kim, and I.J. Chung Characteristics of polyvinylpyrrolidone-layered silicate nanocomposites prepared by attrition ball milling Polymer 44 3 2003 681 689 (Pubitemid 36083201)
10. Hj. Lu, G.Z. Liang, Xy. Ma, By. Zhang, and Xb. Chen Epoxy/clay nanocomposites: further exfoliation of newly modified clay induced by shearing force of ball milling Polym Int 53 10 2004 1545 1553
11. A. Smith, J. Shay, R. Spontak, C. Balik, H. Ade, and S. Smith High-energy mechanical milling of poly(methyl methacrylate), polyisoprene and poly(ethylene-alt-propylene) Polymer 41 16 2000 6271 6283 (Pubitemid 30316248)
12. W. Shao, Q. Wang, Y. Chen, and Y. Gu Preparation and properties of polypropylene/vermiculite nanocomposite through solid-state shear compounding (S3C) method using pan-mill equipment Mater Manuf Process 21 2 2006 173 179 (Pubitemid 43328837)
13. H. Mio, J. Kano, and F. Saito Scale-up method of planetary ball mill Chem Eng Sci 59 24 2004 5909 5916 (Pubitemid 39606034)
14. C. Bai, R. Spontak, C. Koch, C. Saw, and C. Balik Structural changes in poly (ethylene terephthalate) induced by mechanical milling Polymer 41 19 2000 7147 7157 (Pubitemid 30410643)
15. J. Pan, and W. Shaw Properties of a mechanically processed polymeric material J Appl Polym Sci 52 4 2003 507 514
16. J. Pan, and W. Shaw Effects of processing parameters on material properties of mechanically processed polyamide J Appl Polym Sci 56 5 1995 557 566
17. S. Jonna, and J. Lyons Processing and properties of cryogenically milled post-consumer mixed plastic waste Polym Test 24 4 2005 428 434 (Pubitemid 40467101)
18. F. Cavalieri, and F. Padella Development of composite materials by mechanochemical treatment of post-consumer plastic waste Waste Manage (Oxford) 22 8 2002 913 916
19. W. Qiu, T. Endo, and T. Hirotsu A novel technique for preparing of maleic anhydride grafted polyolefins Eur Polym J 41 9 2005 1979 1984 (Pubitemid 40970671)
20. P. He, B. He, W. Xiao, and Y. Zhang Mechanochemical copolymerization of poly (vinyl chloride) with methyl methylacrylate in an open mill machine J Vinyl Add Tech 12 2 2006 42 48 (Pubitemid 43837400)
21. W. Qiu, T. Endo, and T. Hirotsu Interfacial interactions of a novel mechanochemical composite of cellulose with maleated polypropylene J Appl Polym Sci 94 3 2004 1326 1335 (Pubitemid 39394589)
22. F. Zhang, W. Qiu, L. Yang, T. Endo, and T. Hirotsu Mechanochemical preparation and properties of a cellulose-polyethylene composite J Mater Chem 12 1 2002 24 26
23. A. Sorrentino, G. Gorrasi, M. Tortora, V. Vittoria, U. Costantino, and F. Marmottini Incorporation of Mg-Al hydrotalcite into a biodegradable Poly (ε-caprolactone) by high energy ball milling Polymer 46 5 2005 1601 1608 (Pubitemid 40173954)
24. M. Hirscher, M. Becher, M. Haluska, F. von Zeppelin, X. Chen, and U. Dettlaff-Weglikowska Are carbon nanostructures an efficient hydrogen storage medium? J Alloys Compd 356 2003 433 437
25. K. Awasthi, R. Kamalakaran, A. Singh, and O. Srivastava Ball-milled carbon and hydrogen storage Int J Hydrogen Energy 27 4 2002 425 432 (Pubitemid 34154664)
26. Y. Li, B. Wei, J. Liang, Q. Yu, and D. Wu Transformation of carbon nanotubes to nanoparticles by ball milling process Carbon 37 3 1999 493 497
27. J. Otera, and J. Nishikido J Esterification 2009 Wiley
28. M. Alimardani, F. Abbassi-Sourki, and G. Bakhshandeh Preparation and characterization of carboxylated styrene butadiene rubber (XSBR)/multiwall carbon nanotubes (MWCNTs) nanocomposites Iran Polym J 21 11 2012 809 820
29. Blackley DC. High polymer latices: testing and applications: Maclaren; 1966.
30. I. Colombo, G. Grassi, and M. Grassi Drug mechanochemical activation J Pharm Sci 98 11 2009 3961 3986
31. D.R. Maurice, and T. Courtney The physics of mechanical alloying: a first report Metall Mater Trans A 21 1 1990 289 303 (Pubitemid 20648693)
32. R. Avolio, I. Bonadies, D. Capitani, M. Errico, G. Gentile, and M. Avella A multitechnique approach to assess the effect of ball milling on cellulose Carbohydr Polym 87 1 2012 265 273
33. J. Husband, and J. Adams Shear-induced aggregation of carboxylated polymer latices Colloid Polym Sci 270 12 1992 1194 1200
34. S.H. Behrens, D.I. Christl, R. Emmerzael, P. Schurtenberger, and M. Borkovec Charging and aggregation properties of carboxyl latex particles: experiments versus DLVO theory Langmuir 16 6 2000 2566 2575 (Pubitemid 30576778)
35. van Herk AM. Chemistry and technology of emulsion polymerisation. Wiley; 2008.
36. Y. Huang, S. Ahir, and E. Terentjev Dispersion rheology of carbon nanotubes in a polymer matrix Phys Rev B 73 12 2006 125422
37. E. Ivanov, R. Kotsilkova, E. Krusteva, E. Logakis, A. Kyritsis, and P. Pissis Effects of processing conditions on rheological, thermal, and electrical properties of multiwall carbon nanotube/epoxy resin composites J Polym Sci Part B: Polym Phys 49 6 2011 431 442
38. M.D. Via, F.A. Morrison, J.A. King, J.A. Caspary, O.P. Mills, and G.R. Bogucki Comparison of rheological properties of carbon nanotube/polycarbonate and carbon black/polycarbonate composites J Appl Polym Sci 121 2 2011 1040 1051
39. L. Bokobza Multiwall carbon nanotube elastomeric composites: a review Polymer 48 17 2007 4907 4920 (Pubitemid 47176046)
40. H. Wang, P. Zhao, X. Liang, X. Gong, T. Song, and R. Niu Folate-PEG coated cationic modified chitosan-cholesterol liposomes for tumor-targeted drug delivery Biomaterials 31 14 2010 4129 4138
41. Barbara HS. Infrared spectroscopy: fundamentals and applications. Analytical Techniques in the Science; 2004.