Vibration-Based Condition Monitoring: Industrial, Aerospace and Automotive Applications

Vibration-Based Condition Monitoring: Industrial, Aerospace and Automotive Applications

Volumn , Issue , 2010, Pages 1-289

  Randall, Robert Bond ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOBILES; FAULT DETECTION; SIGNAL PROCESSING; STUDENTS; VIBRATION ANALYSIS;

AUTOMOTIVE APPLICATIONS; DIAGNOSIS AND PROGNOSIS; DIAGNOSTIC TECHNIQUES; MACHINE CONDITION MONITORING; POSTGRADUATE STUDENTS; RECIPROCATING MACHINE; SIGNAL PROCESSING TECHNIQUE; UNIVERSITY OF NEW SOUTH WALES;

CONDITION MONITORING;

EID: 84992698947     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470977668     Document Type: Book

References (211)

1. Rao, B.K.N. (2009) Advances in diagnostic and prognostic strategies and technologies for failure-free maintenance of industrial assets. Comadem 2009, San Sebastian, Spain, 9-11 June.
2. Al-Najjar, B. and Alsyouf, I. (2004) Enhancing a company's profitability and competitiveness using integrated vibration-based maintenance: a case study. Journal of European Operation Research, 157, 643-657.
3. Al-Najjar, B. (2009)Amaintenance model for identification, quantification and elimination of losses in companies profitability: an application example. Comadem 2009, San Sebastian, Spain, 9-11 June.
4. Vlok, P.J., Coetzee, J.L., Banjevic, D. et al. (2002) Optimal component replacement decisions using vibration monitoring and the PHM. Journal of the OR Society, 53, 193-202.
5. Sundin, P.O., Montgomery, N. and Jardine, A.K.S. (2007) Pulp mill on-site implementation of CBM decision support software. Proceedings of International Conference of Maintenance Societies, Melbourne, Australia.
6. Neale, M.J. and Woodley, B.J. (1978) A guide to the condition monitoring of machinery. Report TRD 223 for the British Department of Industry.
7. IEEE draft standard P1438/D1.5 (1999) Guide for Applications of Plant Condition Monitoring for Hydroelectric Facilities. Section 4.3 'Potential Benefits'.
8. McMillan, D. and Ault, G.W. (2008) Condition monitoring benefit for onshore wind turbines: sensitivity to operational parameters. IET Renewable Power Generation, 2 (1), 60-72.
9. Braun, S. (ed.) (1986) Mechanical Signature Analysis, Academic Press, London.
10. Armor, A.F. (1983) On-line diagnostics for fossil power plants: the promise and the reality. Proceedings of EPRI 1982 Conference and Workshop, Hartford, CT, USA, 25-27 August, EPRI CS-2920, pp. 1-5-1-26.
11. Raad, A., Zhang, F. and Randall, B. (2003) On the comparison of the use of AE and vibration analysis for early gear fault detection. The Eighth Western Pacific Acoustics Conference, Melbourne, Australia.
12. Tana, C.K., Irving, P. and Mba, D. (2007) A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears. Mechanical Systems and Signal Processing, 21 (1), 208-233.
13. Sherwin, D.J. and Al-Najjar, B. (1999) Practical models for condition monitoring inspection intervals. Journal of Quality in Maintenance Engineering, 5 (3), 203-220.
14. Childs, D. (1993) Turbomachinery Rotordynamics, John Wiley & Son, Inc., New York.
15. American Petroleum Institute (2000) API Standard 670, Machinery Protection Systems, 4th edn, API Publishing Services, Washington, DC.
16. Bently Nevada Application Note 'GLITCH' Definition, Sources, and Methods of Correcting. Available via http://www.gepower.com/prod serv/products/oc/en/bently nevada/application notes.htm (accessed 7 September 2010).
17. Rao, S.S. (2005) Mechanical Vibrations, Prentice Hall, Englewood Cliffs, NJ.
18. Vass, J., Šmíd, R., Randall, R.B. et al. (2008) Avoidance of speckle noise in laser vibrometry by the use of kurtosis ratio: application to mechanical fault diagnostics. Mechanical Systems and Signal Processing, 22 (3), 647-671.
19. Sweeney, P.J. and Randall, R.B. (1996) Gear transmission error measurement using phase demodulation. Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science, 210 (C3), 201-213.
20. Polytec, Basics of Rotational Vibration Sensing. Available via http://www.polytec.com/vib-university (accessed 8 October 2010).
21. Antoni, J. and Braun, S. (eds) (2005) Blind source separation. Mechanical Systems and Signal Processing, 19 (6) (Special issue).
22. Sohre, J. (1968) Operating problems with high speed turbomachinery, causes and corrections. ASME Petroleum Mechanical Engineering Conference, Denver, CO, USA.
23. Childs, D. (1993) Turbomachinery Rotordynamics, John Wiley & Sons, Inc., New York.
24. Gasch, R., Nordmann, R. and Pfützner, H. (2002) Rotordynamik, Springer, Berlin (in German).
25. Rao, J.S. (1996) Rotor Dynamics, 3rd edn, New Age International, New Delhi.
26. Genta, G. (2005) Dynamics of Rotating Systems, Springer, Berlin.
27. Dewell, D.L. and Mitchell, L.D. (1983) Detection of a misaligned disc coupling using spectrum analysis. Journal of Vibration, Acoustics, Stress, and Reliability in Design. 106, 9-16.
28. Bloch, H.P. (1976) How to uprate turbomachinery by optimised coupling selection. Hydrocarbon Processing, 55 (1), 87-90.
29. Bachschmid, N., Pennacchi, P. and Vania, A. (2007) Thermally induced vibrations due to rub in real rotors. Journal of Sound and Vibration, 299 (4-5), 683-719.
30. Sanderson, A.F.P. (1992) The vibration behaviour of a large steam turbine generator during crack propagation through the generator rotor. IMechE International Conference on Vibrations in Rotating Machinery, Bath, UK, Paper C432/102, pp. 263-273.
31. Henry, R.A. and Okah-Avae, B.E. (1976) Vibrations in cracked shafts. IMechE Conference on Vibrations in Rotating Machinery, Cambridge, UK, Paper C162/76.
32. Mayes, I.W. and Davies, W.G.R. (1976) The vibrational behaviour of a rotating shaft system containing a transverse crack. IMechE Conference on Vibrations in Rotating Machinery, Cambridge, UK, Paper C168/76.
33. Gasch, R. (1976) Dynamic behaviour of a simple rotor with a transverse crack. IMechE Conference on Vibrations in Rotating Machinery, Cambridge, UK, Paper C178/76.
34. Baumgartner, R.J. and Ziebarth, H. (1982) Vibration monitoring criteria for early discernment of turbine rotor cracks. Proceedings of the EPRI 1982 Conference andWorkshop, Hartford,CT, USA, 25-27August, pp. 3.1-3.18.
35. Perratt, D.W. (1982) Development of condition monitoring equipment for CEGB generating plant. Proceedings of the EPRI 1982 Conference and Workshop, Hartford, CT, USA, 25-27 August, pp. 2.88-2.102.
36. Kottke, J.J. and Menning, R.H. (1981) Detection of a transverse crack in a turbine shaft -the Oak Creek experience. ASME paper 81-JPGC-Pwr-19.
37. Bachschmid, N., Pennacchi, P. and Tanzi, E. (2010) Cracked Rotors: a survey on static and dynamic behaviour including modelling and diagnosis. Springer, Berlin.
38. Kicinsky, J. (2006) Rotor Dynamics, IFFM, Gdansk.
39. Bachschmid, N., Pennacchi, P. and Vania, A. (2002) Identification of multiple faults in rotor systems. Journal of Sound and Vibration, 254 (2), 327-366.
40. Bachschmid, N., Pennacchi, P. and Vania, A. (2006) A model based identification method of transverse cracks in rotating shafts suitable for industrial machines. Mechanical Systems and Signal Processing, 20 (8), 2112-2147.
41. Chen, P.Y.P., Feng, N., Hahn, E.J. and Hu, W. (2005) Recent developments in turbomachinery modeling for improved balancing and vibration response analysis. ASME Journal of Engineering for Gas Turbines and Power, 127, 646-653.
42. Feng, N., Hahn, E.J. and Hu, W. (2004) A comparison of configuration state identification techniques based on sensitivity to measurement error. Proceedings of ISMA 2004, KUL, Leuven, Belgium, pp. 2525-2536.
43. http://www.answers.com/topic/parametric-oscillator (accessed 7 September 2010).
44. Black, H.F. (1968) Interaction of a whirling rotor with a vibrating stator across a clearance annulus. Journal of Mechanical Engineering Science, 10 (1), 1-12.
45. Smith, J.D. (1983) Gears and their Vibration, Marcel Dekker, New York.
46. Mark, W.D. (1978) Analysis of the vibratory excitation of gear systems: basic theory. Journal of the Acoustical Society of America, 63, 1409-1430.
47. Mark, W.D. (1979) Analysis of the vibratory excitation of gear systems. II: Tooth error representations, approximations, and application. Journal of the Acoustical Society of America, 66, 1758-1787.
48. Randall, R.B. (1982) A new method of modeling gear faults. ASME Journal of Mechanical Design, 104, 259-267.
49. Drosjack, M.J. and Houser, D.R. (1977) An experimental and theoretical study of the effects of simulated pitch line pitting on the vibration of a geared system. ASME DET Conference, Chicago, IL, USA, 26-30 September.
50. McFadden, P.D. and Smith, J.D. (1984) Model for the vibration produced by a single point defect in a rolling element bearing. Journal of Sound and Vibration, 96 (1), 69-82.
51. Bradshaw, P. and Randall, R.B. (1983) Early detection and diagnosis of machine faults on the Trans Alaska Pipeline. MSA Session, ASME Conference, Dearborn, MI, USA, 11-14 September.
52. Sapy, G. (1975) Une application du traitement numèrique des signaux au vibratoire de panne: la detection des ruptures d'aubes mobiles de turbines. Automatisme, XX, (10), 392-399.
53. Maxwell, J. H. (1983) Induction motor magnetic vibration. Proceedings of the Vibration Institute Meeting, Houston, USA, 19-21 April.
54. Pennacchi, P. (2008) Computational model for calculating the dynamical behaviour of generators caused by unbalanced magnetic pull and experimental validation. Journal of Sound and Vibration, 312, 332-353.
55. Jenner, L. (1994) Ford IC engine diagnostics. BE thesis, University of New South Wales.
56. Papoulis, A. and Unnikrishna Pillai, S. (2002) Probability, Random Variables and Stochastic Processes, 4th edn, McGraw-Hill, New York.
57. Gardner, W.A. (1986) Introduction to Random Processes with Applications to Signals and Systems, 2nd edn, Macmillan, Basingstoke.
58. Piersol, A. and Paez, T. (eds) (2010) Harris' Shock and Vibration Handbook, 6th edn, McGraw-Hill, New York.
59. Randall, R.B. (1987) Frequency Analysis, 3rd edn, Brüel & Kjær, Copenhagen.
60. Cooley, J.W. and Tukey, J.W. (1965) An algorithm for the machine calculation of complex Fourier series. Mathematics of Computation, 19 (90), 297-301.
61. Døssing, O. (1984) Notes on Modal Analysis, Brüel & Kjær, Copenhagen.
62. Shin, K. and Hammond, J.K. (2008) Fundamentals of Signal Processing for Sound and Vibration Engineers, John Wiley & Sons, Ltd, Chichester.
63. Randall, R.B. (2002) Vibration analyzers and their use. Chapter 13 in Harris' Shock and Vibration Handbook, 5th edn (ed. C.M. Harris and A.G. Piersol), McGraw-Hill, New York.
64. Randall, R.B. (2007) Noise and vibration data analysis. Chapter 46 in Handbook of Noise and Vibration Control (ed. M. Crocker), John Wiley & Sons, Inc., Hoboken, NJ.
65. Bendat, J.S. (nd) The Hilbert Transform and Applications to Correlation Measurements. Report prepared for Brüel & Kjær, Copenhagen No. BT0008-11.
66. Tribolet, J.M. (1977) A new phase-unwrapping algorithm. IEEE Transactions on Acoustics, Speech, and Signal Processing, ASSP-25, 170-177.
67. Bogert, B.P., Healy, M.J.R. and Tukey, J.W. (1963) The quefrency alanysis of time series for echoes: cepstrum pseudo-autocovariance, cross-cepstrum and saphe cracking. In Proceedings of the Symposium on Time Series Analysis (Ed. M. Rosenblatt), John Wiley & Sons, Inc., New York, pp. 209-243.
68. Childers, D.G., Skinner, D.P. and Kemerait, R.C. (1977) The cepstrum: a guide to processing. Proceedings of the IEEE, 65 (10), 1428-1443.
69. Polydoros, A. and Fam, A.T. (1981) The differential cepstrum: definitions and properties. Proceedings of the IEEE International Symposium on Circuits Systems, 77-80.
70. Oppenheim, A.V. and Schafer, R.W. (1989) Discrete Time Signal Processing, Prentice Hall, Englewood Cliffs, NJ.
71. Randall, R.B. (2009) Cepstral methods of operational modal analysis. Chapter 45 in Encyclopedia of Structural Health Monitoring, John Wiley & Sons, Ltd, Chichester.
72. Antoni, J., Guillet, F. and Danière, J. (2000) Identification of non-minimum phase transfer functions from output-only measurements. ISMA25 Conference, KUL, Leuven, Belgium.
73. McFadden, P.D. (1989) Interpolation techniques for time domain averaging of gear vibration. Mechanical Systems and Signal Processing, 3 (1), 87-97.
74. Potter, R. and Gribler, M. (1989) Computed order tracking obsoletes older methods. SAE Paper, 891131.
75. Bonnardot, F., Randall, R.B. and Antoni, J. (2004) Enhanced unsupervised noise cancellation using angular resampling for planetary bearing fault diagnosis. International Journal of Acoustics and Vibration, 9 (2), 1-10.
76. Gade, S., Herlufsen, H., Konstantin-Hansen, H. and Wismer, N.J. (1995) Order tracking analysis. Brüel & Kjær Technical Review, No. 2.
77. Braun, S. (1975) The extraction of periodic waveforms by time domain averaging. Acoustica, 23 (2), 69-77.
78. Gade, S., Herlufsen, H., Konstantin-Hansen, H. and Wismer, N.J. (1995) Order tracking analysis. Brüel & Kjær Technical Review, No. 2.
79. McFadden, P.D. (1987) A revised model for the extraction of periodic waveforms by time domain averaging. Mechanical Systems and Signal Processing, 1 (1), 83-95.
80. Kay, M.S. and Marple, S.L. (1981) Spectrum analysis-a modern perspective. Proceedings of the IEEE, 69 (11), 1380-1419.
81. Burg, J.P. (1975) Maximum entropy spectral analysis. PhD dissertation, Stanford University.
82. Braun, S. and Hammond, J.K. (1986) Parametric methods. In Mechanical Signature Analysis (ed. S. Braun), Academic Press, London.
83. Randall, R.B. (2002) State of the art in monitoring rotating machinery. ISMA 2002, PMA Dept., KUL, Leuven, Belgium, Tutorial.
84. Akaike, H. (1969) Fitting autoregressive models for prediction. Annals of the Institute of Statistical Mathematics, 21, 243-247.
85. Widrow, B. and Stearns, S. (1985) Adaptive Signal Processing, Prentice Hall, Englewood Cliffs, NJ, pp. 349-351.
86. Ho, D. (2000) Bearing diagnostics and self adaptive noise cancellation. PhD dissertation, University of New South Wales.
87. Ho, D. and Randall, R.B. (1997) Effects of time delay, order of FIR filter and convergence factor on self adaptive noise cancellation. ICSV5, Adelaide, Australia.
88. Antoni, J. and Randall, R.B. (2004) Unsupervised noise cancellation for vibration signals: part I-evaluation of adaptive algorithms. Mechanical Systems and Signal Processing, 18 (1), 89-101.
89. Antoni, J. and Randall, R.B. (2004) Unsupervised noise cancellation for vibration signals: part II-a novel frequency-domain algorithm. Mechanical Systems and Signal Processing, 18 (1), 103-117.
90. Mitchell, L.D. (1982) Improved methods for the FFT calculation of the frequency response function. Journal of Mechanical Design, 104, 277-279.
91. Wigner, E.P. (1932) On the quantum correction for thermodynamic equilibrium. Physical Review, 40, 749-759.
92. Ville, J. (1948) Théorie et applications de la notion de signal analytique. Cables et Transmission, 2A, 61-74.
93. Cohen, L. (1995) Time-frequency Analysis, Prentice Hall, Englewood Cliffs, NJ.
94. Chiollaz, M. and Favre, B. (1993) Engine noise characterisation with Wigner-Ville time-frequency analysis. Mechanical Systems and Signal Processing, 7 (5), 375-400.
95. Staszewski, W.J. and Tomlinson, G.R. (1994) Application of the wavelet transform to fault detection in a spur gear. Mechanical Systems and Signal Processing, 8 (3), 289-307.
96. Rubini, R. and Meneghetti, U. (2001) Application of the envelope andwavelet transform analysis for the diagnosis of incipient faults in ball bearings. Mechanical Systems and Signal Processing 15 (2), 287-302.
97. Newland, D.E. (2007) Wavelet analysis of vibration signals. Chapter 49 in Handbook of Noise and Vibration Control (ed. M. Crocker), John Wiley & Sons, Inc., Hoboken NJ.
98. Daubechies, I. (1990) The wavelet transform, time-frequency localization and signal analysis. IEEE Transactions on Information Theory, 36, 961-1005.
99. Donoho, D.L. and Johnstone, I.M. (1994) Ideal spatial adaptation by wavelet shrinkage. Biometrika, 81 (3), 425-455.
100. Wang, Y., He, Z. and Zi, Y. (2009) Enhancement of signal denoising and multiple fault signatures detecting in rotating machinery using dual-tree complex wavelet transform. Mechanical Systems and Signal Processing. 24 (1), 119-137.
101. Lin, J. and Zuo, M. J. (2003) Gearbox fault diagnosis using adaptive wavelet filter. Mechanical Systems and Signal Processing, 17 (6), 1259-1269.
102. Schukin, E.L., Zamaraev, R.U. and Schukin, L.I. (2004) The optimisation of wavelet transform for the impulse analysis in vibration signals. Mechanical Systems and Signal Processing, 18 (6), 1315-1333.
103. D'Elia, G. (2008) Fault detection in rotating machines by vibration signal processing techniques. PhD thesis, Università degli Studi di Bologna.
104. Antoni, J. (2007) Cyclic spectral analysis in practice. Mechanical Systems and Signal Processing, 21 (2), 597-630.
105. Antoni, J. (2009) Cyclostationarity by examples. Mechanical Systems and Signal Processing, 23 (4), 987-1036.
106. Antoni, J. and Randall, R.B. (2002) Differential diagnosis of gear and bearing faults. ASME Journal of Vibration and Acoustics, 124, 165-171.
107. Antoni, J. (2003) On the benefits of the Wigner-Ville spectrum for analysing certain types of vibration signals. Wespac8 Conference, Melbourne, Australia.
108. Rathbone, T.C. (1939) Vibration tolerance. Power Plant Engineering, 43, 721.
109. Yates, H.G. (1949) Vibration diagnosis in marine geared turbines. Transactions of the North East Coast Institute of Engineers and Shipbuilders, 65, 225.
110. Mitchell, J.S. (1981) Introduction to Machinery Analysis and Monitoring, PennWell Books, Tulsa, OK.
111. Chapman, R.N. (1967) Vibration analysis applied to machinery maintenance. Naval Engineers Journal, 79 (3), 431-437.
112. Glew, C.A.W. and Watson, D.C. (1971) The octave band vibration analyser as a machinery defect analyser. ASME Paper 71-DE-47.
113. ISO 10816, Part 1 (1995) Mechanical vibration -Evaluation of machine vibration by measurements on nonrotating parts -Part 1: General guidelines. International Organization for Standardization, Geneva.
114. Woods, R. (1968) An investigation into vibration criteria for rotating machinery. PhD thesis, University of Aston in Birmingham.
115. Downham, E. andWoods, R. (1971) The rationale of monitoring vibration on rotating machinery in continuously operating process plant. ASME Paper 71-Vibr-96.
116. Randall, R.B. (1979) Efficient machine monitoring using a calculator-based system. First Conference on Condition Monitoring in the Process Industries, Manchester, UK, 27-28 November.
117. Randall, R.B. (1985) Computer aided vibration spectrum trend analysis for condition monitoring. Maintenance Management International, 5, 161-167.
118. Bradshaw, P. and Randall, R.B. (1983) Early fault detection and diagnosis on the Trans Alaska Pipeline. MSA Session, ASME Conference, Dearborn, MI, USA, 7-17.
119. ISO 10816, Part 6 (1995) Mechanical vibration -Evaluation of machine vibration by measurements on nonrotating parts -Part 6: Reciprocating machines with power ratings above 100 kW. International Organization for Standardization, Geneva.
120. Jenner, L. (1994) Ford IC engine diagnostics. BE thesis, University of New South Wales.
121. Lam, S.T. (1995) Internal combustion engine diagnostics using torsional vibration analysis. BE thesis, University of New South Wales.
122. Wiggins, R.A. (1978) Minimum Entropy Deconvolution, Geoexploration, 16, Elsevier Scientific, Amsterdam, 21-35.
123. Endo, H. and Randall, R.B. (2007) Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter. Mechanical Systems and Signal Processing, 21 (2), 906-919.
124. Sawalhi, N., Randall, R.B. and Endo, H. (2007) The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis. Mechanical Systems and Signal Processing, 21 (6), 2616-2633.
125. Lee, J.Y. and Nandi, A.K. (1999) Extraction of impacting signals using blind deconvolution. Journal of Sound and Vibration, 232 (5), 945-962.
126. Dwyer, R.F. (1983) Detection of non-Gaussian signals by frequency domain kurtosis estimation. International Conference on Acoustics, Speech, and Signal Processing, Boston, MA, USA, pp. 607-610.
127. Capdevielle, V., Servière, C. and Lacoume, J. (1996) Blind separation of wide-band sources: application to rotating machine signals. Proceedings of the 8th European Signal Processing Conference, Vol. 3, Prague, Czech Republic, pp. 2085-2088.
128. Vrabie,V.D., Granjon, P. and Servière, C. (2003) Spectral kurtosis: from definition to application. IEEE-EURASIP Workshop on Nonlinear Signal and Image Processing, Grado, Italy, 8-11 June.
129. Dyer, D. and Stewart, R.M. (1977) Detection of rolling element bearing damage by statistical vibration analysis. ASME Transactions-Journal of Mechanical Design, 100 (2), 229-235.
130. Antoni, J. (2006) The spectral kurtosis: a useful tool for characterising nonstationary signals. Mechanical Systems and Signal Processing, 20 (2), 282-307.
131. Antoni, J. and Randall, R.B. (2006), The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines. Mechanical Systems and Signal Processing, 20 (2), 308-331.
132. Sawalhi, N. and Randall, R.B. (2005) Spectral kurtosis enhancement using autoregressive models. ACAM2005 Conference, Melbourne, Australia, 16-18 February.
133. Antoni, J. (2006) Fast computation of the kurtogram for the detection of transient faults. Mechanical Systems and Signal Processing, 21 (1), 108-124.
134. Sawalhi, N. and Randall, R. B. (2005) Spectral kurtosis optimization for rolling element bearings. ISSPA Conference, Sydney, Australia, 29 August-1 September.
135. Stewart, R. M. (1977) Some useful data analysis techniques for gearbox diagnostics. Proceedings of the Meeting on the Applications of Time Series Analysis, ISVR, University of Southampton, Southampton, UK, 19-22 September, Paper #18.
136. Wang,W. andWong, A.K. (2002) Autoregressive model-based gear fault diagnosis. ASME Transactions, Journal of Vibration and Acoustics, 124, 172-179.
137. McFadden, P.D. (1991) A technique for calculating the time domain averages of the vibration of the individual planet gears and the sun gear in an epicyclic gearbox. Journal of Sound and Vibration, 144 (1), 163-172.
138. McFadden, P.D. (1994) Window functions for the calculation of the time domain averages of the vibration of the individual planet gears and sun gear in an epicyclic gearbox. ASME Transactions Journal of Vibration and Acoustics, 116, 179-187.
139. McFadden, P.D. (1986) Detecting fatigue cracks in gears by amplitude and phase demodulation of the meshing vibration. ASME Transactions Journal of Vibration, Acoustics, Stress and Reliability in Design 108, 165-170.
140. Sweeney, P.J. and Randall, R.B. (1996) Gear transmission error measurement using phase demodulation. Proceedings of the IMechE, Part C, Journal of Mechanical Engineering Science, 210 (C3), 201-213.
141. Du, S. and Randall, R.B. (1998) Encoder error analysis in gear transmission error measurement. Proceedings of the IMechE, Part C, Journal of Mechanical Engineering Science, 12 (C4), 277-285.
142. Du, S., Randall, R.B. and Kelly, D.W. (1998) Modelling of spur gear mesh stiffness and static transmission error. Proceedings of the IMechE, Part C, Journal of Mechanical Engineering Science, 12, (C4), 287-297.
143. Randall, R.B. (1984) Separating excitation and structural response effects in gearboxes. Third International Conference on Vibration in Rotating Machinery, IMechE, York, UK, pp. 101-107.
144. Randall, R.B. (1997) Advanced machine diagnostics. The Shock and Vibration Digest, 29 (1), 6-30.
145. Randall, R.B. (2009) Cepstral methods of operational modal analysis. Chapter 24 in Encyclopedia of Structural Health Monitoring (eds C. Boller, F.-K. Chang and Y. Fujino), John Wiley & Sons, Ltd, Chichester.
146. El Badaoui, M., Antoni, J., Guillet, F. and Danière, J. (2001) Use of the moving cepstrum integral to detect and localise tooth spalls in gears. Mechanical Systems and Signal Processing, 15 (5), 873-885.
147. El Badaoui,M., Cahouet, V., Guillet, F. et al. (2001) Modelling and detection of localized tooth defects in geared systems. Transactions of the ASME, 123, 422-430.
148. Endo, H., Randall, R.B. and Gosselin, C. (2004) Differential diagnosis of spalls vs. cracks in the gear tooth fillet region. Journal of Failure Analysis and Prevention, 4 (5), 57-65.
149. Endo, H., Randall, R.B. and Gosselin, C. (2009) Differential diagnosis of spall vs. cracks in the gear tooth fillet region: experimental validation. Mechanical Systems and Signal Processing, 23 (3), 636-651.
150. Mark,W.D. and Reagor, C.P. (2007) Static-transmission-error vibratory-excitation contributions from plastically deformed gear teeth caused by tooth bending-fatigue damage. Mechanical Systems and Signal Processing, 21 (2), 885-905.
151. Jia, S. and Howard, I. (2006) Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrations. Mechanical Systems and Signal Processing, 20, (2), 332-349.
152. Stander, C.J., Heyns, P.S. and Schoombie,W. (2002) Using vibration monitoring for local fault detection on gears operating under fluctuating load conditions. Mechanical Systems and Signal Processing, 16 (6), 1005-1024.
153. Zhan,Y., Makis,V. and Jardine, A.K.S. (2006) Adaptive state detection of gearboxes under varying load conditions based on parametric modelling. Mechanical Systems and Signal Processing, 20 (1), 188-221.
154. Bartelmus,W. and Zimroz, R. (2009) Vibration condition monitoring of planetary gearbox under varying external load. Mechanical Systems and Signal Processing, 23 (1), 246-257.
155. Bartelmus, W. and Zimroz, R. (2009) A new feature for monitoring the condition of gearboxes in non-stationary operating conditions. Mechanical Systems and Signal Processing, 23 (6), 1528-1534.
156. Barszcz, T. and Randall, R.B. (2009) Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine. Mechanical Systems and Signal Processing, 23 (6), 1352-1365.
157. Darlow, M.S., Badgley, R.H. and Hogg, G.W. (1974) Application of high frequency resonance techniques for bearing diagnostics in helicopter gearboxes. US Army Air Mobility Research and Development Laboratory, Technical Report, pp. 74-77.
158. Bonnardot, F., Randall, R.B. and Antoni, J. (2004) Enhanced unsupervised noise cancellation using angular resampling for planetary bearing fault diagnosis. International Journal of Acoustics and Vibration, 9 (2), 51-60.
159. Ho,D. and Randall, R.B. (2000) Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals. Mechanical Systems and Signal Processing, 14 (5), 763-788.
160. McCormick, A.C. and Nandi, A.C. (1998) Cyclostationarity in rotating machine vibrations. Mechanical Systems and Signal Processing 12 (2), 225-242.
161. Randall, R.B., Antoni, J. and Chobsaard, S. (2001) The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals. Mechanical Systems and Signal Processing, 15 (5), 945-962.
162. Antoni, J. and Randall, R.B. (2002) Differential diagnosis of gear and bearing faults. ASME Journal of Vibration and Acoustics, 124, 165-171.
163. Antoni, J. and Randall, R.B. (2003) A stochastic model for simulation and diagnostics of rolling element bearings with localised faults. ASME Journal of Vibration and Acoustics, 125, 282-289.
164. Sawalhi, N. and Randall, R.B. (2007) Semi-automated bearing diagnostics -three case studies. Comadem Conference, Faro, Portugal, 12-15 June.
165. Sawalhi, N. (2007) Rolling Element Bearings: Diagnostics, Prognostics and Fault Simulations. PhD Dissertation, University of New South Wales. Available at http://handle.unsw.edu.au/1959.4/40544.
166. Antoni, J., Danière, J. and Guillet, F. (2002) Effective vibration analysis of IC engines using cyclostationarity. Part I: a methodology for condition monitoring. Journal of Sound and Vibration, 257 (5), 815-837.
167. Antoni, J. (2009) Cyclostationarity by examples. Mechanical Systems and Signal Processing, 23 (4), 987-1036.
168. Zouari, R., Antoni, J., Ille, J.L. et al. (2007) Cyclostationary modelling of reciprocating compressors and application to valve fault detection. International Journal of Acoustics and Vibration, 12 (3), 116-124.
169. Bardou, O. and Sidahmed, M. (1994) Early detection of leakages in the exhaust and discharge systems of reciprocating machines by vibration analysis. Mechanical Systems and Signal Processing, 8 (5), 551-570.
170. Lyon, R.H. and Ordubadi, A. (1982) Use of cepstra in acoustical signal analysis. ASME Journal of Design, 104, 303-306.
171. Azzoni, P.M., Minelli, G. and Padovani, E. (1989) Combustion pressure recovering in spark ignition car engine. ISATA20, Florence, Italy, pp. 667-676.
172. Randall, R.B., Ren, Y. and Ngu, H. (1996) Diesel engine cylinder pressure recovery. Proceedings of ISMA21, KU Leuven, Belgium, 847-856.
173. Cassini, G.D., D'Ambrogio, W. and Sestieri, A. (1996) Frequency domain vs cepstrum technique for machinery diagnostics and input waveform reconstruction. Proceedings of ISMA21, KU Leuven, Belgium, pp. 835-846.
174. Ren, Y. (1999) Detection of knocking combustion in diesel engines by inverse filtering of structural vibration signals. PhD dissertation, University of New South Wales.
175. Gao,Y. andRandall, R.B. (1999) Reconstruction of diesel engine cylinder pressure using a time domain smoothing technique. Mechanical Systems and Signal Processing, 13 (5), 709-722.
176. Zurita, G. (2001) Vibration based diagnostics for analysis of combustion properties and noise emissions of IC engines. PhD thesis, Luleå University of Technology.
177. Johnsson, R. (2004) Indirect measurement for control and diagnostics of IC engines. PhD thesis, Luleå University of Technology.
178. Zurita, G. and Haupt, D. (2003) A new approach to diagnostics of the combustion process in diesel engines using vibration measurements -Part II -detection of the start of combustion using the reconstructed pressure signals. International Journal of Acoustics and Vibration, 8 (2), 77-82.
179. Johnsson, R. and Ågren, A. (2004) Cylinder pressure reconstruction from vibration and speed measurements on IC engines. Proceedings of ISMA 2004, KU Leuven, Belgium, pp. 965-974.
180. Johnsson, R. (2006) Cylinder pressure reconstruction based on complex radial basis function networks from vibration and speed signals. Mechanical Systems and Signal Processing, 20 (8), 1923-1940.
181. Gu, F., Jacob, P.J. and Ball, A. (1999) Non-parametric models in the modelling of engine performance and condition. Part 2, non-intrusive estimation of diesel engine cylinder pressure and its use in fault detection. Proceedings of the IMechE, Part D, 213 (D1), 135-143.
182. Moskwa, J., Wang, W. and Bucheger, A. (2001) A new methodology for use in engine diagnostics and control, utilizing 'Synthetic' engine variables: theoretical and experimental results. ASME Journal of Dynamic Systems, Measurement, and Control, 123, 528-534.
183. Desbazeille, M., Randall, R.B., Guillet, F. et al. (2010) Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft. Mechanical Systems and Signal Processing, 24 (5), 1529-1541.
184. Heng, A., Zhang, S., Tan, A.C.C. and Mathew, J. (2009) Rotating machinery prognostics: state of the art, challenges and opportunities. Mechanical Systems and Signal Processing, 23 (3), 724-739.
185. Jardine, A.K.S., Lin, D. andBanjevic, D. (2006)Areviewonmachinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing, 20 (7), 1483-1510.
186. Randall, R.B. (1985) Computer aided vibration spectrum trend analysis for condition monitoring. Maintenance Management International, 5, 161-167.
187. Thompson, R.A. and Weichbrodt, B. (1969) Gear diagnostics and wear detection. ASME Vibration Conference, Philadelphia, USA, March, Paper 69-VIBR-10.
188. Brüel & Kjær (1988) Machine-condition monitoring using vibration analysis -a case study from an iron-ore mine. B&K Application Note BO 0178-11.
189. Brüel & Kjær (1989) Systematic machine-condition monitoring -a case study from Parenco Paper Mill in Holland. B&K Application Note BO 0299-11.
190. Brüel & Kjær (1988) Machine-condition monitoring using vibration analysis -permanent monitoring of an Austrian paper mill. B&K Application Note BO 0247-11.
191. Brüel & Kjær (1988) Machine-condition monitoring using vibration analysis -the use of spectrum comparison for bearing fault detection -a case study. B&K Application Note BO 0253-11.
192. Brüel & Kjær (1986) Six weeks' advance warning of breakdown. B&K Application Note BO 0230-11.
193. Bradshaw, P. and Randall, R.B. (1983) Early detection and diagnosis of machine faults on the Trans Alaska Pipeline. MSA Session, ASME Conference, Dearborn, MI, USA, September.
194. Stewart, R.M. (1977) Some useful data analysis techniques for gearbox diagnostics. Proceedings of the Meeting on the Applications of Time Series Analysis, ISVR, University of Southampton, Southampton, UK, 19-22 September, Paper #18.
195. Dyer, D. and Stewart, R.M. (1977) Detection of rolling element bearing damage by statistical vibration analysis. ASME Paper, 26-30 September.
196. Samanta, B. (2004) Gear fault detection using artificial neural networks and support vector machines with genetic algorithms. Mechanical Systems and Signal Processing, 18 (3), 625-644.
197. Samanta, B. and Al-Balushi, K.R. (2003) Artificial neural network based fault diagnostics of rolling element bearings using time-domain features. Mechanical Systems and Signal Processing, 17 (2), 317-328.
198. Ding, Y. and Rieger, N.F. (2003) Spalling formation mechanism for gears. Wear, 254, 1307-1317.
199. Sawalhi, N. and Randall, R.B. (2008) Novel signal processing techniques to aid bearing prognostics. IEEE PHM Conference, Denver, CO, USA, October.
200. Sawalhi, N. and Randall, R.B. (2011) Vibration response of spalled rolling element bearings: observations, simulations and signal processing techniques to track the spall size. Mechanical Systems and Processing, 25 (3).
201. Dowling, M. (1993) Application of non-stationary analysis to machinery monitoring. IEEE International Conference on Acoustics, Speech, and Signal Processing, ICASSP-93, ISBN 0-7803-0946-4/93, 1, 159-162.
202. Epps, I.K. and McCallion, H. (1994) An investigation into the characteristics of vibration excited by discrete faults in rolling element bearings. Annual Conference of the Vibration Association of New Zealand, Christchurch, New Zealand.
203. Paris, P.C. and Ergodon, F. (1963) A pitting model for rolling contact fatigue. ASME Transactions, Journal of Basic Engineering, 85, 528-534.
204. Roemer, M.J., Kacprzynski, G.J., Orsagh, R.F. and Marshall, B.R. (2005) Prognosis of rotating machinery components. Chapter 19 in Damage Prognosis for Aerospace, Civil and Mechanical Systems (eds D.J. Inman, C.F. Farrar, V. Lopes Jr and V. Steffen Jr), John Wiley & Sons, Ltd, Chichester.
205. Sawalhi, N. and Randall, R.B. (2008) Simulating gear and bearing interactions in the presence of faults: Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults. Mechanical Systems and Signal Processing, 22 (8), 1924-1951.
206. Sawalhi, N. and Randall, R.B. (2008) Simulating gear and bearing interactions in the presence of faults: Part II: Simulation of the vibrations produced by extended bearing faults. Mechanical Systems and Signal Processing, 22 (8), 1952-1966.
207. Sawalhi, N. and Randall, R.B. (2010) Improved simulations for fault size estimation in rolling element bearings. CM-MFPT Conference, Stratford-on-Avon, UK, June.
208. Hines, J.W. and Usynin, A. (2008) Current computational trends in equipment prognostics. International Journal of Computational Intelligence Systems, 1 (1), 95-109.
209. Hines, J.W. (2009) Empirical methods for process and equipment prognostics. MFPT 2009 Conference, Dayton, OH, USA, 28-30 April, Tutorial 2.
210. Heng, A., Tan, A.C.C., Mathew, J. et al. (2009) Intelligent condition-based prediction of machinery reliability. Mechanical Systems and Signal Processing, 23 (5), 1600-1614.
211. Sundin, P.O., Montgomery, N. and Jardine, A.K.S. (2007) Pulp mill on-site implementation of CBM decision support software. Proceedings of International Conference of Maintenance Societies, Melbourne, Australia.