Optimization of energy consumption response parameters for turning operation using Taguchi method

Journal of Cleaner Production

Volumn 137, Issue , 2016, Pages 1406-1417

  Bilga, Paramjit Singh ^a   Singh, Sehijpal ^a   Kumar, Raman ^b  

^a GURU NANAK DEV ENGINEERING COLLEGE   (India)

^b Research Scholar   (India)

Author keywords

Active energy consumption; ANOVA; CNC turning; Energy efficiency; Power factor; Taguchi method

Indexed keywords

ALLOY STEEL; ANALYSIS OF VARIANCE (ANOVA); CUTTING; DESIGN OF EXPERIMENTS; ELECTRIC POWER FACTOR; ENERGY UTILIZATION; ENVIRONMENTAL MANAGEMENT; MACHINE TOOLS; TAGUCHI METHODS; TUNGSTEN CARBIDE; TURNING;

ACTIVE ENERGY; CNC TURNING; ENVIRONMENTAL PERFORMANCE; EXPERIMENTAL ANALYSIS; MACHINING OPERATIONS; POWER FACTORS; REDUCING ENERGY CONSUMPTION; RESPONSE PARAMETERS;

ENERGY EFFICIENCY;

EID: 84991516776     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2016.07.220     Document Type: Article

References (39)

1. Abhang, L.B., Hameedullah, M., Power prediction model for turning EN-31 steel using response surface methodology. J. Eng. Sci. Technol. Rev. 3:1 (2010), 116–122.
2. Aggarwal, A., Singh, H., Kumar, P., Singh, M., Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique—a comparative analysis. J. Mater. Process. Technol. 200:1 (2008), 373–384.
3. Anderberg, S.E., Kara, S., Beno, T., Impact of energy efficiency on computer numerically controlled machining. Proc. Institution Mech. Eng. Part B J. Eng. Manuf. 224:4 (2010), 531–541.
4. Arif, M., Stroud, I.A., Akten, O., A model to determine the optimal parameters in a machining process for the most profitable utilization of machining energy. Proc. Institution Mech. Eng. Part B J. Eng. Manuf. 229:2 (2015), 266–274.
5. Balogun, V.A., Edem, I.F., Adekunle, A.A., Mativenga, P.T., Specific energy based evaluation of machining efficiency. J. Clean. Prod. 116 (2016), 187–197.
6. Bensely, A., Stephen Jayakumar, S., Mohan Lal, D., Nagarajan, G., Rajadurai, A., Failure investigation of crown wheel and pinion. Eng. Fail. Anal. 13:8 (2006), 1285–1292.
7. Bhattacharya, A., Das, S., Majumder, P., Batish, A., Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA. Prod. Eng. 3:1 (2009), 31–40.
8. Campatelli, G., Lorenzini, L., Scippa, A., Optimization of process parameters using a response surface method for minimizing power consumption in the milling of carbon steel. J. Clean. Prod. 66 (2014), 309–316.
9. Camposeco-Negrete, C., Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 Using Taguchi methodology and ANOVA. J. Clean. Prod. 53 (2013), 195–203.
10. Camposeco-Negrete, C., Optimization of cutting parameters using Response Surface Method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum. J. Clean. Prod. 91 (2015), 109–117.
11. Camposeco-Negrete, C., Najera, J.D.D.C., Miranda-Valenzuela, J.C., Optimization of cutting parameters to minimize energy consumption during turning of AISI 1018 steel at constant material removal rate using robust design. Int. J. Adv. Manuf. Technol. 83:5–8 (2016), 1341–1347.
12. Debnath, S., Reddy, M.M., Yi, Q.S., Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method. Measurement 78 (2016), 111–119.
13. Department of Trade and Industry United Kingdom, Meeting the Energy Challenge, Government White Paper on Energy,” May 2007, Pp. 7. Available:, 2007 (accessed 21.06.2013.) www.berr.gov.uk/files/file39564.pdf.
14. El-Moniem, M.S.A., Azazi, H.Z., Mahmoud, S.A., A current sensorless power factor correction control for LED lamp driver. Alexandria Eng. J. 53:1 (2014), 69–79.
15. Gaitonde, V.N., Karnik, S.R., Figueira, L., Paulo Davim, J., Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts. Int. J. Refract. Metals Hard Mater. 27:4 (2009), 754–763.
16. Guo, Y., Loenders, J., Duflou, J., Lauwersa, B., Optimization of energy consumption and surface quality in finish turning. 5th CIRP Conference on High Performance Cutting 2012, 2012, 551–556.
17. Hanafi, I., Khamlichi, A., Cabrera, F.M., Almansa, E., Jabbouri, A., Optimization of cutting conditions for sustainable machining of PEEK-CF30 using tin tools. J. Clean. Prod. 33 (2012), 1–9.
18. Hu, S., Liu, F., He, Y., Peng, B., Characteristics of additional load losses of spindle system of machine tools. J. Adv. Mech. Des. Syst. Manuf. 4:7 (2010), 1221–1233.
19. International Energy Agency IEA, World Energy Outlook 2009-Executive Summary. Available:, 2009, 1–15 (accessed 22.06.2013.) http://www.worldenergyoutlook.org/docs/weo2009/WEO2009_es_ english.pdf.
20. Liu, N., Zhang, Y.F., Lu, W.F., A Hybrid approach to energy consumption modelling based on cutting power: a milling case. J. Clean. Prod. 104 (2015), 264–272.
21. Liu, Z.Y., Guo, Y.B., Sealy, M.P., Liu, Z.Q., Energy consumption and process sustainability of hard milling with tool wear progression. J. Mater. Process. Technol. 229 (2016), 305–312.
22. Ma, J., Ge, X., Chang, S.I., Lei, S., Assessment of cutting energy consumption and energy efficiency in machining of 4140 steel. Int. J. Adv. Manuf. Technol. 74:9–12 (2014), 1701–1708.
23. Mativenga, P.T., Rajemi, M.F., Calculation of optimum cutting parameters based on minimum energy footprint. CIRP Ann. Manuf. Technol. 60:1 (2011), 149–152.
24. Marouani, K., Nounou, K., Benbouzid, M., Tabbache, B., Power factor correction of an electrical drive system based on multiphase machines. IEEE, 2014 International Conference on Green Energy, 2014, March, 152–157.
25. Mori, M., Fujishima, M., Inamasu, Y., Oda, Y., A study on energy efficiency improvement for machine tools. CIRP Annals-Manufacturing Technol. 60:1 (2011), 145–148.
26. Neugebauer, R., Schubert, A., Reichmann, B., Dix, M., Influence exerted by tool properties on the energy efficiency during drilling and turning operations. CIRP J. Manuf. Sci. Technol. 4:2 (2011), 161–169.
27. Oda, Y., Mori, M., Ogawa, K., Nishida, S., Fujishima, M., Kawamura, T., Study of optimal cutting condition for energy efficiency improvement in ball end milling with tool-work piece inclination. CIRP Annals-Manufacturing Technol. 61:1 (2012), 119–122.
28. Oo, M.T., Cho, E.E., Improvement of power factor for industrial plant with automatic capacitor bank. Proceedings of World Academy of Science, Engineering and Technology, vol. 32, 2008, August, 695–701.
29. Park, C.W., Kwon, K.S., Kim, W.B., Min, B.K., Park, S.J., Sung, I.H., Seok, J., Energy consumption reduction technology in manufacturing—a selective review of policies, standards, and research. Int. J. Precis. Eng. Manuf. 10:5 (2009), 151–173.
30. Prieto, J., Jones, M., Barrero, F., Levi, E., Toral, S., Comparative analysis of discontinuous and continuous PWM techniques in VSI-fed five-phase induction motor. IEEE Trans. Industrial Electron. 58:12 (2011), 5324–5335.
31. Pusavec, F., Kramar, D., Krajnik, P., Kopac, J., Transitioning to sustainable production Part II: evaluation of sustainable machining technologies. J. Clean. Prod. 18:12 (2010), 1211–1221.
32. Qasim, A., Nisar, S., Shah, A., Khalid, M.S., Sheikh, M.A., Optimization of process parameters for machining of AISI-1045 steel using Taguchi design and ANOVA. Simul. Model. Pract. Theory 59 (2015), 36–51.
33. Ross, P.J., Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design. 1996, McGraw-Hill, New York, USA.
34. Sarıkaya, M., Gullu, A., Multi-response optimization of minimum quantity lubrication parameters using taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25. J. Clean. Prod. 91 (2015), 347–357.
35. Shokoohi, Y., Khosrojerdi, E., Shiadhi, B.R., Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation. J. Clean. Prod. 94 (2015), 330–339.
36. Velchev, S., Kolev, I., Ivanov, K., Gechevski, S., Empirical models for specific energy consumption and optimization of cutting parameters for minimizing energy consumption during turning. J. Clean. Prod. 80 (2014), 139–149.
37. Wang, Q., Liu, F., Li, C., An integrated method for assessing the energy efficiency of machining workshop. J. Clean. Prod. 52 (2013), 122–133.
38. Yan, J., Li, L., Multi-objective optimization of milling parameters–the trade-offs between energy, production rate and cutting quality. J. Clean. Prod. 52 (2013), 462–471.
39. Yingjie, Z., Energy efficiency techniques in machining process: a review. Int. J. Adv. Manuf. Technol. 71:5–8 (2014), 1123–1132.