Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA

Production Engineering

Volumn 3, Issue 1, 2009, Pages 31-40

  Bhattacharya, Anirban ^a   Das, Santanu ^b   Majumder, P ^b   Batish, Ajay ^a  

^a THAPAR UNIVERSITY   (India)

^b KALYANI GOVERNMENT ENGINEERING COLLEGE   (India)

Author keywords

ANOVA; High speed machining; Power consumption; Surface roughness; Taguchi design

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); CARBIDE TOOLS; CARBIDES; MACHINING; METAL ANALYSIS; REGRESSION ANALYSIS; SPEED; SURFACE PROPERTIES; SURFACE ROUGHNESS;

AISI 1045; ANOVA; COATED CARBIDE TOOLS; COMBINED TECHNIQUES; CUTTING PARAMETERS; CUTTING SPEED; DEPTH OF CUTS; EXPERIMENTAL STUDIES; FEED RATES; HIGH SPEED MACHINING; OPTIMAL CUTTING PARAMETERS; ORTHOGONAL ARRAYS; POWER CONSUMPTION; SURFACE FINISHES; SURFACE ROUGHNESS PARAMETERS; TAGUCHI DESIGN; TAGUCHI TECHNIQUES;

ELECTRIC POWER UTILIZATION;

EID: 62249167281     PISSN: 09446524     EISSN: 18637353     Source Type: Journal    
DOI: 10.1007/s11740-008-0132-2     Document Type: Article

References (22)

1. Tugrul Ö (2007) Karpat Yigit, Figueira Luís, Davim J Paulo. Modeling of surface finish and tool flank wear in turning AISI D2 steel with ceramic wiper inserts. J Mater Process Technol 189(1-3):192-198. doi: 10.1016/j.jmatprotec.2007.01.021
2. Dhar NR, Paul S, Chattopadhyay AB (2001) The influence of cryogenic cooling on tool wear, dimensional accuracy and surface finish in turning AISI 1040 and E4340 steels. Wear 249(10-11):932-942. doi: 10.1016/ S0043-1648(01)00825-0
3. Dhar NR, Paul S, Chattopadhyay AB (2002) Machining of AISI 4140 steel under cryogenic cooling - Tool wear, surface roughness and dimensional deviation. J Mater Process Technol 123(3):483-489. doi: 10.1016/ S0924-0136(02)00134-6
4. Dhar NR, Kamruzzaman M (2007) Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI 4037 steel under cryogenic condition. Int J Mach Tools Manuf 47(5):754-759. doi: 10.1016/ j.ijmachtools.2006.09.018
5. Choudhury SK, Bajpai JB (2005) Investigation in orthogonal turn-milling towards better surface finish. J Mater Process Technol 170(3):487-493. doi: 10.1016/j.jmatprotec.2004.12.010
6. Gillibrand D, Sarwar M, Pierce CT (1996) The economic benefit of finish turning with coated carbide. J Surf Coat Technol 86-87(2):809-813. doi: 10.1016/S0257-8972(96)03059-9
7. Sundaram RM, Lambert BK (1979) Surface roughness variability of AISI 4140 steel in fine turning using carbide tools. Int J Prod Res 17:249-258. doi: 10.1080/00207547908919612
8. Tonshoff HK, Wobker HG, Brandt D (1995) Hard turning - influence on the workpiece properties. Trans NAMRI/SME 23:215-220
9. Tonshoff HK, Wobker HG, Brandt D (1996) Tool wear and surface integrity in hard turning. J Prod Eng 3(1):19-24
10. Abaro AM, Apinwall DK, Wise MLH (1995) Tool life and workpiece surface integrity evaluations when machining hardened AISI H13 and AISI E52100 Steels with conventional ceramic and PCBN tool materials. SME technical paper, pp 159
11. Noordin MY, Venkatesh VC, Chan CL, Abduallah A (2001) Performance evaluation of cemented carbide tools in turning AISI 1010 steel. J Mater Process Technol 116:16-21. doi: 10.1016/S0924-0136(01)00838-X
12. Luk WK, Scrutton RF (1986) The origin of groove wear in the turning operation. Int J Prod Res 6:197-206. doi: 10.1080/00207546708929780
13. Trent EM, Wright Paul K Metal Cutting. Butterworth Heinemann, New York
14. Ross PJ. Taguchi techniques for quality engineering. McGraw-Hill, New York
15. Yang WH, Tarng YS (1998) Design optimization of cutting parameters for turning operations based on the Taguchi method. J Mater Process Technol 84:122-129. doi: 10.1016/S0924-0136(98)00079-X
16. Nian CY, Yang WH, Tarng YS (1999) Optimization of turning operations with multiple performance characteristics. J Mater Process Technol 95:90-96. doi: 10.1016/S0924-0136(99)00271-X
17. Davim JP (2003) Design optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays. J Mater Process Technol 132:340-344. doi: 10.1016/S0924-0136(02)00946-9
18. Nalbant M, Gökkaya H, Sur G (2007) Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. J Mater Des 28(4):1379-1385
19. 3 + TiCN mixed ceramic tool. J Mater Des 28(5):1618-1622
20. Davim J (2007) Paulo, Figueira Luís Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. J Mater Des 28(4):1186-1191
21. Aman A, Hari S, Pradeep Kumar, Manmohan S. Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique - A comparative analysis", J Material Process Technol, 2007, online
22. Faleh A (2005) Al-Sulaiman M, Baseer A, Sheikh Anwar K "Use of electrical power for online monitoring of tool condition. J Mater Process Technol 20:364-371