Condition assessment of high voltage insulation in power system equipment

Condition Assessment of High Voltage Insulation in Power System Equipment

Volumn , Issue , 2008, Pages 1-277

  James, R E ^a   Su, Q ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EQUIPMENT;

CONDITION ASSESSMENTS; ELECTRICAL POWER ENGINEERING; HIGH VOLTAGE INSULATION; HIGH VOLTAGE SYSTEMS; HIGH-VOLTAGE EQUIPMENTS; INSULATION CONDITIONS; POWER SYSTEM ENGINEERS; POWER SYSTEM EQUIPMENTS;

INSULATION;

EID: 84988963585     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1049/PBPO053E     Document Type: Book

References (241)

1. Jenkins, N., 'Impact of dispersed generation on power systems', CIGREElectra 199, December 2001, pp. 6-13
2. Weedy, B.M., and Cory, B.J., Electric Power Systems (John Wiley & Sons, New York, 1998)
3. Luckett, M., 'How VARs can travel', IEEReview, September 1999, pp. 207-10
4. Poidvin, D., 'Steam Turbine-Generator at Penly', Important Achievements of CIGRE, December 1998 (by permission of CIGRE)
5. Berenger, P., 'Hydro-Generator at Pouget', Important Achievements of CIGRE, December 1998 (by permission of CIGRE)
6. Asplund, G., 'HVDC using voltage source converters - a new way to build highly controllable and compact HVDC substations', CIGRE 2000, Paper P2-04 (on behalf of Study Committee 23)
7. Andersen, B., and Barker, C., 'A new era in HVDC?', IEEReview, March 2000, pp. 33-9
8. Lips, H.P., 'Voltage stresses and test requirements on equipment of HVDC converter stations and transmission cables', CIGRE 2000, Panel 2, Paper P2-06 (on behalf of Study Committee 14)
9. Lips, H.P., 'A survey of the reliability of HVDC systems throughout the world during 19971998', CIGRE 2000, Paper 14-02 (on behalf of Study Committee 14 - WG 14.04)
10. Montsinger, V.M., 'Breakdown curve for solid insulation', Electrical Engineering, December 1935;54:1300
11. Ryan, H.M. (ed.), High Voltage Engineering and Testing, 2nd edition (IET, UK, 2001)
12. Leijon, M., Dahlgren, M., Walfridsson, L., Ming, L. and Jaksts, A., 'A recent development in the electrical insulation systems of generators and transformers', IEEE Electrical Insulation Magazine, May/June 2001;17(3):10-15
13. Leijon, M., Dahlgren, M., Walfridsson, L., Ming, L. and Jaksts, A., 'Superconductivity makes its power transmission debut', general review in Engineers Australia, July 1999, pp. 26-30
14. Graham, J., Biledt, G., and Johansson, J., 'Power System Interconnections using HVDC Links', IX Symposium of Specialists in Electrical Operational and Expansion Planning (IX sEpOPE), 23-27 May 2004, Rio de Janeiro, Brazil, SP151
15. Graham, J., Biledt, G., and Johansson, J., Summary in Electra 219, April 2005, pp. 29-39
16. Shugg, W. Tillar, Handbook of Electrical and Electronic Insulating Materials, 2nd edn (Van Nostrand Reinhold, NY, 1995)
17. Engineering Dielectrics, Vol. I Corona, Vol. IIA Solids, Vol. III Liquids' ASTM
18. Bradwell, A. (ed.), ElectricalInsulation (Peter Peregrinus Ltd, London, 1983)
19. Ryan, H.M. (ed.), High Voltage Engineering and Testing, 2nd edn (IET, London, 2001)
20. EPRI AC Transmission Line Reference Book - 200kV and above, 3rd edn (EPRI, Palo Alto, 2005)
21. Holmberg, M.E., and Gubanski, S.M., 'Motion of metallic particles in GIS', IEEE Electrical Insulation Magazine, July/August 1998: 5-14 (also Septem-ber/October 2000)
22. Dakin, T.W., Luxa, G., Oppermann, G., Vigreux, J., Wind, G., and Winkelnkem-per, H., 'Breakdown of gases in uniform fields: Paschen Curves for nitrogen, air and sulphur hexafluoride', Electra, January 1974;32:61-82
23. Heylen, A.E.D., IEEE Electrical Insulation Magazine, May/June 2006;22(3):25-35 for formulae
24. Kuffel, E., Zaengl, W.S. and Kuffel, J., High Voltage Engineering Fundamentals, 2nd edn (Butterworth-Heinemann, UK, 2000)
25. Latham, R.V., High-Voltage Vacuum Insulation: The Physical Basis (Academic Press, London, 1981)
26. Wilson, A.C.M., Insulating Liquids: their uses, manufacture and properties (Peter Peregrinus, Stevenage, UK and NY, 1980)
27. Rouse, T.O., 'Mineral insulating oil in transformers' IEEE Electrical Insulation Magazine, May/June 1998: 6-16
28. James, R.E. 'Behaviour of oil immersed surfaces when subjected to tangential electrical stress at high voltage', PhD thesis, University of London, 1974
29. Samat, J., and Lacaze, D. 'Micro-particles in transformer oil and dielectric withstand effects', Alsthom Review 1988;(11):47-57
30. CIGRE Brochure 157, 'Effect of particles on transformer dielectric strength', Electra, June 2000;(190):135-140 (WG 12/17)
31. Beroual, A. et al., 'Liquid Dielectrics Committee International Study Group', IEEE Electrical Insulation Magazine, March/April 1998: 6-17
32. 'Dielectric Liquids', SpecialIssue, IEEE Transactions on Dielectrics and Electrical Insulation, February 2002, vol. 9
33. Oommen, T.V., and Petrie, E.M., 'Electrostatic charging tendency of transformer oils', IEEE Transactions on Power Apparatus and Systems, 1984;103:1923-1931
34. Peyraque, L., Beroual, A. and Buret, F., 'Static electrification of pressboard/oil interface and transient phenomena', IEEE Transactions on Dielectrics and Electrical Insulation, June 1998;5: 443-9
35. CIGRE Brochure 170, 'Static Electrification in Large Power Transformers', Electra, June 2000;(191):101-104 (JWG 12/15.13, TF 01 & 02)
36. Darveniza, M., Electrical Properties of Wood and Line Design (University of Queensland Press, Brisbane, 1980)
37. Hepburn, D.M., Kemp, I.J. and Shields, A.J., 'Mica' IEEE Electrical Insulation Magazine, September/October 2000; 16(5):19-24
38. Allen, R.D., 'Improving the high-temperature performance of EPDM' in Cheremisinoff, N.P., and Dekker, Marcel (eds.), Handbook of Polymer Science Technology (Marcel Dekker, New York and Basel, 1989), pp. 127-41
39. Roby, D., 'Liquid silicone technology for outdoor insulation', presented at Electrical Engineering Congress, Sydney, Australia, 1994, pp. 24-30
40. Cherney, E.A., 'RTVSilicone-Ahightechsolutionfordirty insulator problems', IEEE Electrical Insulation Magazine, November/December 1995; 11:8-14
41. Mackevich, J.P., and Hoffman, J.W., 'Insulation enhancement with heat-shrinkable components - Part III', IEEE Electrical Insulation Magazine, July/August 1991;7(4)
42. Brazier, L.G. 'The breakdown of cables by thermal instability', JIEE, 1935;77:104-15
43. Black, R.M., and Reynolds, E.H., 'Ionization and irradiation effects on dielectric materials', Proc. Inst. Electr. Eng;112:1231 June 1965
44. CIGRE WG 12.09, 'A survey of facts and opinions on the maximum safe operating temperatures of power transformers under emergency conditions', Electra, 1990;(129)
45. James, R.E., Liu, Z., Phung, B.T. and Blackburn, T.R., 'Effect of moisture and temperature on the PD behaviour of an oil-impregnated insulation system', Proc.AUPEC’97, University of NSW, Australia, September/October 1997, pp. 607-14
46. Wang, W., Vandermaar, A.J., and Srivastava, K.D., 'Review of condition assessment of power transformers in service', IEEE Electrical Insulation Magazine, November/December 2002;18(6): 12-25
47. Allan, D., and Blackburn, T.R., 'Service aged insulation - Guidelines on managing the ageing process', CIGRE (WG D1.11) Brochure 228, Electra, June 2003; (208)
48. Whitehead, S., Dielectric Breakdown of Solids (Oxford University Press, 1953)
49. Austen, A.E.W., and Whitehead, S., 'Discharges in insulation under alternating current stresses', Proc. Inst. Electr. Eng., Part II, Vol. 88, p. 88,1941
50. Arman, A.N., and Starr, A.T., 'The measurement of discharges in dielectrics', Journal of Institution of Electrical Engineers, 1936;79:67-81
51. Kreuger, F. H., Partial Discharge Detection in High-Voltage Equipment (Butterworth & Co., London, 1989)
52. James, R.E., and Phung, B.T., 'Development of computer-based measurements and their application to PD pattern analysis', IEEE Transactions on Dielectrics and Electrical Insulation, October 1995;2(5) 838-56
53. Kind, D., An Introduction to High-Voltage Experimental Techniques (Vieweg and Son, Braunschweig, 1978)
54. Mason, J.H., 'Discharges', IEEE Transactions on Electrical Insulation, August 1978;EI13:211-238
55. James, R.E., and White, P.A., 'Relationships between fast and slow rise time partial discharges', Proceedings of the 4th International Symposium on High Voltage Engineering, Athens, September, 1983, Paper 22.05
56. Viale, F., Poittevin, J., Buccianti, R. et al., 'Study of a correlation between energy of partial discharges and degradation of paper/oil insulation', Paper 15-12,1982, session of CIGRE
57. 'Recognition of Discharges', Electra, December 1969;(11), p. 61
58. 'Knowledge rules for partial discharge diagnosis in service', CIGRE (WG D1.11), Brochure 226, Electra, 2003; (207)
59. Hauschild, W., and Mosch, W., Statistical Techniques for High-Voltage Engineering, IET Power Series, no. 13 (IET, London, 1992)
60. Simmons, M., 'High Voltage Cables' in Ryan, H.M. (ed.), High Voltage Engineering and Testing (IET, London, 2001)
61. Brancato, E.L., 'Insulating aging - A historical and critical review', IEEE Transactions on Electrical Insulation, August 1978;EI-13:308-317
62. Fofana, I., Wasserberg, V., Borsi, H., and Gockenbach, E., 'Challenge of mixed insulating liquids for use in high-voltage transformers, Part 2: Investigations of mixed liquid Impregnated paper insulation', IEEE Electrical Insulation Magazine, July/August 2002; 18(4):5-15
63. James, R.E., 'Discharge detection in high-voltage power transformers', Proc. Inst. Electr. Eng., July 1970;117(7):1352-62
64. Moser, H.P., and Dahinden, V., 'Transformerboard II', (H. Weidmann AG, Rapperswil, 1987)
65. Vahedy, Vahdat, 'Polymer insulated high voltage cables', IEEE Electrical Insulation Magazine, May/June 2006;22(3): 13-18
66. Vitkovich, D., Field analysis: Experimental and Computational Methods (D. Van Nostrand, New York, 1966)
67. deKock, N., Mendik, M., Andjelic, Z., and Blaczczyk, A., 'Application of the 3D boundary element method in the design of EHV GIS components', IEEE DEIS Electrical Insulation Magazine, May/June 1998;14(3):17-22
68. Ryan, H.M. (ed.), High Voltage Engineering and Testing, 2nd edn (IET, London, 2001)
69. Mason, J.H., 'Discharges', IEEE Transactions on Electrical Insulation, August 1978; EI13:211-238
70. Kreuger F. H., Partial Discharge Detection in High-Voltage Equipment (Butterworth & Co., London, 1989)
71. Binns, D.F., and Randall, T.J., 'Calculation of potential gradients for a dielectric slab placed between a sphere and plane', Proc. Inst. Electr. Eng., 1967;114:1521-8
72. Insulation News and Market Report, 1998;6(1):54
73. Williams, D.L., Haddad, A., Rowlands, A.R., Young, H.M., and Waters R.T., 'Formation of dry bands in clean fog on polluted insulators', IEEE Trans. on Dielectrics and Electrical Insulation, October 1999;6(5):724-51
74. Yoshida, S., and Naito, K., 'Survey of electrical and mechanical failures of insulators caused by ice and/or snow', CIGRE WG B2.03, Electra, October 2005;(222):22-26
75. EPRI, 'Electrical and mechanical properties of ceramic insulators', Report No. 1000505, December 2000
76. Kumosa, M., Kumosa, L., and Armentrout, D., 'Failure analyses of non-ceramic insulators: Part 1 - Brittle fracture characteristics', IEEE Electrical Insulation Magazine, 21(3):14-27;
77. Kumosa, M., Kumosa, L., and Armentrout, D., 'Part II - The brittle fracture model and failure prevention', IEEE Electrical Insulation Magazine, 2005;21(4):28-40
78. Cherney, E.A., and Gorur, R.S., 'RTV silicone rubber coatings for outdoor insulators', IEEE Trans. on Dielectrics and Electrical Insulation, October 1999;6(5):605-11
79. Zaengl, W.S., and Kuffel, E., High Voltage Engineering Fundamentals, (Permagon Press, Oxford, 1984), Chapter 4.
80. Allan, D.M., James, R.E., Mc Mullan, PJ., et al., 'Australian and New Zealand experience in the application of diagnostic techniques for assessment of insulation condition in high voltage apparatus', CIGRE Paper 15/33-10, Session 1990
81. Gilbert, R., Gillespie, A., Eklund, A., Ericsson, J., Hartings, R., Jacobson, B., 'Pollution flashovers on wall bushings at a coastal site', CIGRE Paper 15-102, 1998
82. Bossi, A., and Yakov, S., 'Bushings and connections for large power transformers', CIGRE Paper 12-15, 1984
83. Cease, T.W., and Johnston, P., 'A magneto-optic currenttransducer', IEEE Trans. on Power Delivery, 1994;9 (4):1778-88
84. Dubanton, C., CIGRE WG 23.07, 'Instrument transformer technology and service behaviour - design and construction', 1988-1989
85. James R.E., Blackburn T.R., Cotton M., et al., 'Challenges for advanced diagnostic techniques - Faults undetectable by existing electrical methods', CIGRE Paper 15-306, Session 2000
86. Yakuymyshyn, C.P., Brubakar, M.A., Johnston, P.M., and Reinbold, C., 'Manufacturing challenges of optical current and voltage sensors for utility applications', Proceedings of SPIE, 3201:2-19, Sensors and Controls for Advanced Manufacturing 01/1998
87. Andoh, H., Nishiwaki, S., Suzuki, H., Boggs, S., and Kuang, J., 'Failure mechanisms and recent improvements in ZnO arrester elements', IEEE Electrical Insulation Magazine, January/February 2000;6 (1):25-31
88. Darveniza, M., Roby, D., and Tumma, L.R., 'Laboratory and analytical studies of the effects of multipulse lightning currents on metal oxide arresters', IEEE Trans. Power Delivery, April 1994;9:764-71
89. Balcombe, H.G., 'The assessment and management of older oil-filled switchgear', Power Engineering Journal, July 1977;11 (6):234-8
90. Ryan, H.M. (ed.), High Voltage Engineering and Testing, 2nd edn (IET, London, 2001)
91. Tsurga, Masato, Numato, Naohisa, and Nagano, Hideaki, '400 kV Polypropylene-insulated oil-filled cable for power grid, Singapore', Hitachi Cable Review, October 1999;18:9-12
92. Kent, H., and Bucea, G., 'Inquiry into Auckland power supply failure. Technical Report on Cable Failures', Integral Energy May 1998 [also online]. Available from www.med.govt.NZ/upload/23747/failtech.pdf [accessed 20 May 2007]
93. Gibbons, J.A.M., Saunders, B.L., and Stannett, A.W., 'Role of metal debris in the failure of stop-joints as used in 275 kV and 400 kV self-contained oil-filled cable circuits', IEEProc. C, Gener. Transm. Distrib., November 1980;127(6):406-19
94. 'Practical aspects of the detection and location of partial discharges in power cables', Electra, June 2006;(226):63-69, TF D1.02.05 (CIGRE Brochure 297)
95. Dundas, J.H., and Cochran, W.H., 'Technical advances in the underground medium-voltage cable specifications of the largest investor-owned utilities in the U.S.', IEEE Electrical Insulation Magazine, November/December1999;15(6):29-37
96. 'Accessories for HV cables with extruded insulation', Electra, February 2001;194:31-33 (CIGRE Brochure 177, Section 2, Part 1)
97. 'Interfaces in accessories for extruded HV and EHV cables', JTF 21/15, Electra, August 2003;203:53-59 (CIGRE Brochure 210)
98. 'Service aged insulation. Guidelines on managing the ageing process' (D. Allan and T.R. Blackburn, WG D1.11), Electra, June 2003;208:69-72 (CIGRE Brochure 228)
99. Koch, H., and Schoeffner, G., 'Gas insulated transmission line (GIL). An overview', Electra, December 2003;211:8-17 (CIGRE Brochure 218)
100. Yin, W., et al., 'Improved magnet wire for inverter-fed motors', Proceedings of the IEEE Electrical Insulation Conference, Chicago, September 1997
101. IEEE 522-2004, 'IEEE Guide for Testing Turn-to-turn Insulation on Form-Wound Stator Coils for A.C. Rotating Electric Machines'.
102. Hains, A.J., 'Insulation performance under switched voltage waveforms', Power Engineering Journal, August 2000:158-63
103. Wheeler, J.C.G., 'Effects of converter pulses on the electrical insulation in low and medium voltage motors', IEEE Electrical Insulation Magazine, March/April2005;21 (2):22-9
104. IEC/TS 60034-18-41 Ed.1.0, 2006 Rotating electrical machines, Part 18, Section 41: Qualification and type tests for Type 1 electrical insulating systems used in electrical machines fed from voltage converters.
105. Say, M.G., Alternating Current Machines, 5th edn (Pitman, London, 1990)
106. Boulter, E.A., and Stone, G.C., 'Historical development of rotor and stator winding insulation materials and systems', IEEE Electrical Insulation Magazine, May/June 2004;20(3):25-39
107. Wilson, A., 'Slot discharge damage in air cooled stator windings', IEEProc. A, Sci. Meas. Technol., May 1991;138(3):153-60
108. CIGRE Group 11 Rotating Machines Report, Electra, February 1999;(182):9
109. Leijon, M., Dahlgren, M., Walfridsson, L., Ming, L., and Jaksts, A., 'A recent development in the electrical insulation systems of generators and transformers', IEEE Electrical Insulation Magazine, May/June 2001;17(3)
110. Chadwick, A.T., Ferguson, J.M., Ryder, D.H., and Stearn, G.F., 'Design of power transformers to withstand surges due to lightning with special reference to a new type of winding', Proc. Inst. Electr. Eng., December 1950;97, part II:737-50
111. Pedersen, A., 'On response of interleaved transformer windings to surge voltages', IEEE Transactions on Power Apparatus and Systems, 1963;82:349-56
112. Mc Donald, D., 'The electrolytic analogue in the design of high-voltage power transformers', Proc. Inst. Electr. Eng., April 1953;100 part II:145-66
113. Bean, R.L., Chackan Jr., N, Moore, H.R., and Wenz, E.C., Transformers for the Electric Power Industry (New York, McGraw Hill, 1959)
114. Poittevin, J., and Sapet, J., 'Preventive detection of electrostatic phenomena in transformers', Paper 15/12-01, CIGRE, Session 1992
115. Lindgren, S.R., Washabaugh, A.P., Zahn, M., Brubaker, M., von Guggenberg, P., and Nelson, J.K., 'Temperature and moisture transient effects on flow electrification in power transformers', Paper 15/12-02, CIGRE Session 1992
116. CIGRE JWG 12/15, Lindgren, S.R. (convener), 'Static electrification in large power transformers', Electra, August 2000;(191):101-104 (Technical Brochure 170)
117. Morched, A.S., Marti, L., Brierley, R.H., and Lackey, J.G., 'Analysis of internal winding stresses in EHV generator step-up transformer failures', IEEE Transactions on Power Delivery, April 1996;11 (2)
118. James, R.E., Blackburn, T.R., Cotton, M., et al. 'Challenges for advanced diagnostic techniques - faults undetectable by existing electrical methods', Paper 15-306, CIGRE Session 2000
119. CIGRE WG 12.17, Aubin, J. (convener), 'Effect of particles on transformer dielectric strength', Electra, June 2000;(190):135-140 (Technical Brochure 157)
120. Moser, H.P., and Dahinden, V., Transformerboard II (H. Weidmann AG, Rapperswil, 1987); see also Transformerboard (1977)
121. Ebb, G.M., and Spence, G.S., 'Gas insulated transformers for Haymarket Substation', Proceedings of the IEEE/PES Conference on Transmission and Distribution, Japan, October 2002, vol. 1, pp. 511-16
122. CIGRE WG D1.11 Allan, D. (convener), 'Service aged insulation guidelines on managing the ageing process', Electra, June 2003;(208):69-72 (Technical Brochure 228).
123. Kuffel, E., Zaengl, W.S., and Kuffel, J., High Voltage Engineering Fundamentals (Newnes Press, Oxford, 2000)
124. Schwab, A.J., High Voltage Measurement Techniques (MIT Press, Massachusetts, 1972)
125. Kind, D., An Introduction to High-Voltage Experimental Techniques (Vieweg and Son, Braunschweig, 1978)
126. Hylton-Cavallius, N., High Voltage Laboratory Planning (Emil Haefely & Cle AG, Basel, 1986)
127. Gallaghar, T.J., and Pearmain, A.J., High Voltage Measurement, Testing and Design (John Wiley and Sons, New York, 1984)
128. Parnell, T., 'The influence of circuit parameters on power frequency flashover tests', Transactions of the Institution of Engineers, Australia, vol. EM3, no. 2, 1961 (and 1964)
129. Train, D., and Giano Trink, N., 'Prevention of recovery overvoltage on high voltage testing transformers', IEEE PES Winter Meeting, Paper T 73 064-1, 1973
130. WG 33.03 TF 04 CIGRE, 'Proposed requirements for high voltage withstand tests on site', Electra, December 2000;(193):13-21
131. Gockenback, E., and Hauschild, W., 'The selection of the frequency range for high-voltage on-site testing of extruded insulation cable systems', IEEE Electrical Insulation Magazine, November/December 2000;16(6):11-16
132. Kuffel, E., and Abdullah, M., High Voltage Engineering (Permagon Press, London, 1970)
133. Gulski, E., Wester, F.J., Smit, J.J., Seitz, P.N. and Turner, M., 'Advanced partial discharge diagnostic of MV power cable system using oscillating wave test system', IEEE Electrical Insulation Magazine, March/April 2000;16(2):17-25
134. Lemke, E., and Schmiegel, P., 'Complex discharge analysing (CDA) - an alternative procedure for diagnosis tests on HV power apparatus of extremely high capacity', Proceedings of the 9th International Conference on High Voltage Engineering, Paper 5617, Graz, Austria, 1995
135. Gronefield, P., and von Olshausen, R., 'Avery low frequency 200 kV generator as a precondition fortesting insulating materials with 0.1 AC voltage', Proceedings of the 4th International Conference on High Voltage Engineering, Paper 21.02, Athens, 1983
136. Allan, D.M., James, R.E., McMullan, P.J., etal., 'Australian and New Zealand experience in the application of diagnostic techniques for assessment of insulation condition in high voltage apparatus', Paper 15/33 - 10, pp. 1-9, CIGRE, Paris, 1990
137. Mole, G., and Robinson, F.C., 'A versatile discharge detector' Co-operative Electrical Research, No. 21
138. James, R.E., Phung, B.T. and Blackburn, T.R., 'Computer-aided digital techniques for partial measurements and analysis', Int. Symposium on Digital Techniques in HV Measurements, Toronto, Canada, October 1991, pp. 2.7-2.11
139. Kreuger, F.H., Partial Discharge Detection in High-Voltage Equipment (Butterworth & Co., London, 1989)
140. Liu, Z., Phung, B.T., James, R.E., Blackburn, T.R., and Ariastina, W.G., 'Optimization in partial discharge measurements', Proceedings of Australasian Universities Power Engineering Conference (AUPEC), Curtin University of Technology, Perth, Australia, 2001, pp. 407-12
141. CIGRE SC 33 TF 33.03.05, 'Calibration procedures for analog and digital measuring instruments', Eiectra, October 1998;(180):123-44
142. CIGRE SC 15.03 TF 15.05.02, 'Partial discharge detection system for GIS: Sensitivity verification for the UHF method and the acoustic method', Eiectra, April 1999;(183):75-87
143. Black, I.A., 'A pulse discrimination system for discharge detection in electrically noisy environments', Proceedings of the International HV Symposium, Zürich, September 1975
144. CIGRE, 'Elimination of interference in discharge detection', Eiectra, 1977;(21)
145. Austin, J., and James, R.E., 'On-line digital computer system for measurement of partial discharges in insulation structures', IEEE Transactions on Electrical Insulation, December 1976;11(4):129-39
146. CIGRE Working Group 21.03, 'Recognition of discharges', Electra, December 1969;(11):61-98
147. James, R.E., and Phung, B.T., 'Development of computer based measurements and their application to PD pattern analysis', IEEE Transactions on Dielectrics and Electrical Insulation, October 1995;2(5):838-56
148. CIGRE WG D1.11, 'Knowledge rules for partial discharges in service', Electra, April 2003;(207):63-6 (CIGRE Brochure 226)
149. Lundgaard, L.E., et al., 'Partial discharges in transformer insulation', CIGRE Task Force 15.01.04, Paper 15-302, Paris, 2000
150. Mole, G., 'Improved test methods for the insulation of electrical equipment', Proceedings of the Institution of Electrical Engineers, Section IIA, no. 3, 1953
151. Mardira, K.P., Saha, T.K., and Sutton, R.A., 'Investigation of diagnostic techniques for metal oxide surge arresters', IEEE Transactions on Dielectrics and Electrical Insulation, February 2005;12:50-59
152. Zaengl, W.S., 'Dielectric spectroscopy in time and frequency domain for high voltage power equipment' IEEE Electrical Insulation Magazine, 2003: Part 1, September/October;19(5):5-19; Part 2, November/December;19(6):9-22
153. CIGRE Task Force 15.01.09, 'Dielectric response methods for diagnostics of power transformers', IEEE Electrical Insulation Magazine, May/June 2003;19(3):12-18 (see also Electra, June 2002;(202):25-36)
154. Bognar, A., Kalocsai, L., Csepes, G., Nemeth, E. and Schmidt, J., 'Diagnostic tests of h-v oil-paper insulating systems (in particular transformer insulation) using dc dielectrometrics', CIGRE Paper 15/33-08, Paris 1990
155. Saha, T.K., and Purkait, P., 'Investigation of polarization and depolarization current measurements for the assessment of oil-paper insulation of aged transformers', IEEE Transactions on Dielectrics and Electrical Insulation, February 2004;11:144-54
156. Hvidsten, S., Holmgren, B., Adeen, L., and Wettstrom, J., 'Condition assessment of 12- and 24-kV XLPE cables installed during the 80s. Results from a joint Norwegian/Swedish research project', IEEE Electrical Insulation Magazine, November/December 2005;21(6):17-23
157. Du, Y., Zahn, M., Lesieutre, B.C., Mamishev, A.V., and Lindgren, S.R., 'Moisture equilibrium in transformer paper/oil systems', IEEE Electrical Insulation Magazine, January/February 1999;15(1):11- 20
158. Duval, M., and dePablo, A., 'Interpretation of gas-in-oil analysis using new IEC Publication 60599 and IEC TC 10 databases', IEEE Electrical Insulation Magazine, March/April 2001;17(2):31-41
159. Duval, M., 'A review of faults detectable by Gas-in-Oil analysis in transformers', IEEE Electrical Insulation Magazine, May/June;18(3):9-17
160. dePablo A., 'Interpretation of degradation models of furanic compounds', CIGRE WG 15.01 TF 03 (1997) (see also Electra, 1997;(175))
161. Oommen, T.V., and Prevost, T.A., 'Cellulose insulation in oil-filled power transformers: Part II - Maintaining insulation integrity and life', IEEE Electrical Insulation Magazine, March/April 2006;22(3):5-14
162. Hill, D.J.T., Le, T.T., Darveniza, M., and Saha, T.K., 'A study of degradation of cellulosic insulation materials in a power transformer - Part 1: Molecular weight study of cellulose insulation paper', Polymer Degradation and Stability, 1995;48(1):79-87
163. Birtwhistle, D., Blackmore, P., Krivda, A., Cash, G., and George, G., 'Monitoring the condition of insulator shed materials in overhead distribution networks', IEEE Transactions on Dielectrics and Electrical Insulation, October 1999;(6):612-19
164. Harrold, R.T., 'Acoustic techniques for detecting and locating electrical discharges', Engineering Dielectrics, vol. 1, Chap. 10 (ASTM Technical Publication 669, 1979) (see also IEEE Trans. Electr. Insul., vol. 11, 1976)
165. CISPR 18-2: Admnt. 1, 1993, 'Radio interference characteristics of overhead lines and high-voltage equipment; Part 2: Methods of measurement and procedure for determining limits'
166. CISPR 16-1:1993, 'Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus' 'Guidelines for design and maintenance of overhead distribution and transmission lines', HB C(b)1-1999 Australian Standards
167. Darveniza, M. et al. 'A multiple pulse lightning impulse generator', Proceedings of the 6th International Conference on High Voltage Engineering, Paper 47.07, Aug/Sep 1989, New Orleans (see also IEEE Trans. Power Delivery, April 1994;9:764-71, Ref. In AS 1307.2)
168. CIGRE WG D1.33 TF 02.05, 'Practical aspects of the detection and location of partial discharges in power cables', 2006, Brochure 297
169. CIGRE WG 21.16, 'Partial discharge detection in installed extruded cable systems' July 2000, Brochure 173
170. CIGRE WG 21.02, 'Recommendations for testing of long AC submarine cables with extruded insulation for system voltage above 30(36) to 150(170) kV', Electra, April 2000;(189):29-37
171. CIGRE TF 21.05, 'Experiences with AC tests after installation on the main insulation of polymeric (E)HV cable systems', Electra, December 2002;(205): 27-35
172. Lips, H.P., 'Voltage stresses and test requirements on equipment of HVDC converter stations and transmission cables', 2000, Paper P2-06 CIGRE
173. CIGRE WG 14.32, 'HVDC converter stations for DC voltages above +/ -600 kV', Electra, December 2002;(205):51, Brochure 215
174. CIGRE WG 21.02, 'Recommendations for tests of power transmission DC cables for a rated voltage up to 800 kV (Electra 72, 1980 Revision)', Electra, April 2000:39-55 (see also Electra, February 2005; (218))
175. CIGRE WG B4.37, 'VSC Transmission', Electra, April 2005;(219):29-39, Brochure 269
176. CIGRE WG 21.01, 'Testing DC extruded cable systems for power transmission up to 250kV', Electra, February 2003;(206):47-53, Brochure 219
177. Kreuger, F.H., Partial Discharge Detection in High Voltage Equipment (Butterworth, London, 1989)
178. Kuffel, E., and Zaengl, W.S., High-Voltage Engineering: Fundamentals (Pergamon Press, Oxford and New York, 1984)
179. de Kock, N., Coric, B., and Pietsch, R., 'UHF PD detection in gas-insulated switchgear - suitability and sensitivity of the UHF method in comparison with the IEC270 method', IEEE Electrical Insulation Magazine, 1996;12(6): 20-6
180. Sedding, H.G., Campbell, S.R., Stone, G.C., and Klempner, G.S., 'A new sensor for detecting partial discharge in operating turbine generators', IEEE Transactions on Energy Conversion, December 1999;6(4):700-6
181. Judd, M.D., Yang, L., and Hunter, I.B.B., 'Partial discharge monitoring for power transformers using UHF sensors, Part 1: Sensors and signal interpretation', IEEE Electrical Insulation Magazine, May/June 2005;21(2): 5-14
182. Judd, M.D., Yang, L., and Hunter, I.B.B., 'Partial discharge monitoring for power transformers using UHF sensors, Part 2: Field experience', IEEE Electrical Insulation Magazine, May/June 2005;21(3):5-13
183. Judd, M.D., Farish, O., Pearson, J.S., and Hampton B.F., 'Dielectric windows for UHF partial discharge detection', IEEE Transactions on Dielectrics and Electrical Insulation December 2001;8(6):953-8.
184. Tapanes, E., Oanca, I., Katsifolis, J., and Su, Q., 'The innovative use of optical fibres for condition monitoring of high voltage equipment', Proceedings ofthe 5th International Conference on Optimization of Electric and Electronic Equipment, Brasov, Romania, 15-17 May 1996, pp.1-24
185. Blackburn, T.R., Phung, B.T., James, R.E., 'Optical fibre sensor for partial discharge detection and location in high-voltage power transformer', Proceedings of the 6th Annual Conference on Dielectric Materials, Measurements and Applications, 7-10 September 1992, pp. 33-6
186. Nokes, Geoff, 'Optimising power transmission and distribution networks using optical fibre distributed temperature sensing systems', Power Engineering Journal, December 1999:291-6
187. Su, Q., Li, H.J., Tan, K.C., 'Hotspot location and mitigation for underground power cables', Proceedings of the IEE on Generation, Transmission and Distribution, November 2005;152(6):934-8
188. Li, H.J., Tan, K.C., and Su, Q., 'Assessment of underground cable ratings based on distributed temperature sensing', IEEE Transactions on Power Delivery, October 2006;21(4):1763-9
189. Su, Q., 'Research and development on insulation condition monitoring in Australia', keynote speech at the 1st International Conference on Insulation Condition Monitoring of Electrical Plant, Wuhan, China, 24-26 September 2000, pp. 19-24
190. Su, Q., 'Development of a directional sensor for noise discrimination in partial discharge measurements', Proceedings of IEEE conference on Precision Electromagnetic Measurements, Sydney, May 2000, pp.1-4
191. Su, Q., and Sack, K., 'Non-contact directional sensors for PD measurements', Techcom 2003, Sydney, May 2003, pp. 26-31
192. Australian Standard AS 1026:1992, Electrical Cables - Impregnated Paper Insulated, for working voltages up to and including 33kV
193. Australian/New Zealand Standard AS/NZS 1429.1:2000 and 1429.2:1998, Electrical Cables - Polymeric Insulated
194. Konig, G., and Feser, K., 'A new digital filter to reduce periodical noise in partial discharge measurements', presented at the 6th International Symposium on High Voltage Engineering, New Orleans, 28 August-1 September 1989, paper 43.10
195. GA-1 Gating Amplifier, instrument manual, Insultest Australia, November 1997
196. th International Symposium on High Voltage Engineering, New Orleans, AugustSeptember 1989, paper 15.10
197. Su, Q., 'Application of digital signal processing techniques for noise suppression in partial discharge measurements', Proceedings of the 4th International Conference on Properties and Applications of Dielectric Materials, Brisbane, 3-8 July 1994, pp. 602-5
198. Su, Q., 'An adaptive filtering method for noise suppression in partial discharge measurements', presented at the International Conference on Electrical Insulation and Dielectric Phenomena, Pocono Manor, Pennsylvania, October 1993, pp. 481-6
199. Allan, D.M., Brundell, M.S., and Boyd, K.J., 'New insulation diagnostic and monitoring techniques for HV apparatus', presented at the 3rd International Conference on Properties and Application of Insulation Materials, Tokyo, July 1991, pp. 448-51
200. Malewski, R., Douville, J., and Belanger, G., 'A diagnostic system for in-service transformers', CIGRE 27, Paris, August-September 1986, paper 1201
201. Black, I.A., and Leng, N.K., 'The application of the pulse discrimination system to the measurement of partial discharges under noise condition', presented at the IEEE International Symposium on Electrical Insulation, June 1980, pp. 167-70
202. Montanari, G.C., Cavallini, A., and Puletti, F., 'A new approach to partial discharge testing of HV cable systems', IEEE Electrical Insulation Magazine, January/February 2006;22(1):14-23
203. Su, Q., and James, R.E., 'Analysis of partial discharge pulse distribution along transformer windings using digital filtering techniques,' IEE Proc. C, Gener. Transm. Distrib., September 1992;139(5):402-10
204. James, R.E., Phung, B.T., and Su, Q., 'Application of digital filtering techniques to the determination of partial discharge location in transformers', IEEE Transactions on Electrical Insulation, August 1989;24(4):657-668
205. Duval M., and dePablo A., 'Interpretation of gas-in-oil analysis using new IEC publication 60599 and IEC TC 10 database', IEEE Trans. Dielectr. Electr. Insul., March/April 2001;17(2):31-41
206. Ritchie, D., 'The opportunities presented by online transformer gas monitoring', presented at the Doble Conference, Boston, April 1999
207. Jones, S.L., 'The detection of partial discharges in transformers using computer aided acoustic emission techniques', record of the IEEE International Conference on Electrical Insulation, Toronto, Canada, June 1990
208. Blackburn, T.R., James, R.E., Su, Q., Phung, T., Tychsen, R., and Simpson, J., 'An improved electric/acoustic method for the location of partial discharges in power transformers', Proceedings of the 3rd International Conference on Properties and Applications of Dielectric Materials, Tokyo, July 1991, pp. 1132-35
209. Unsworth J., Booth N., Tallis D., and Ball K., 'Evaluation of novel online partial discharge monitor for high voltage transformers during operation.' Presented at the 16th Nordic Symposium on Electrical Insulation, Copenhagen, June 1999, pp. 133-40
210. Kind, D., and Karner, H., High Voltage Insulation Technology (Vieweg and Son, Braunschweig, 1985)
211. Judd, M.D., Farish, O., Pearson, J.S., and Hampton, B.F., 'Dielectric windows for UHF partial discharge detection', IEEE Transactions on Dielectrics and Electrical Insulation, December 2001;8(6):953-8
212. Contin A., et al., 'Digital detection and fuzzy classification of partial dischargesignals', IEEE Transactions on Dielectrics and Electrical Insulation, June 2002;9(3):335-48
213. Su, Q., and Vaillancourt, G.H., 'Computer-based multi-terminal partial discharge measurements on transformers', presented at the IEEE International Symposium on Electrical Insulation, Montreal, June 1996, pp. 61-4
214. Rutgers, W.R., Ross, R., and Van Rijn, Theo G.M., 'Online PD detection techniques for assessment of the dielectric condition of HV components', presented at the IEEE 7th International Conference on Solid Dielectrics, Eindhoven, June2001, pp. 481-4
215. Judd, M.D. et al., 'Intelligent condition monitoring and asset management - partial discharge monitoring for power transformers', Power Engineering Journal, December 2002;16:297-304
216. Jinno, M. et al., 'Partial discharge measurement of underground transmission cable lines affected by earthquake', Proceedings of IEE Japan on Power and Energy, 1994, pp. 255-60
217. Kakuta, M. et al., 'High sensitivity partial discharge detection for ultra-high voltage XLPE cable line', Proceedings of IEE Japan on Power and Energy, 1994, paper 123, pp. 131-6
218. Harrold, R.J., Emery, F.T., Murphy, F.J., and Drinkut, S.A., 'Radio frequency sensing of incipient arcing faults within large turbine generators,' IEEE Transactions on PAS, 1979; PAS-98(3):1167-73
219. Emery, F.T., and Lenderking, B.N., 'Turbine generator online diagnostics using RF monitoring', IEEE Trans. PowerApp. Syst., 1981;PAS-100(12):4874-982
220. Emery, F.T., and Harrold, R.J., 'Radio frequency response of a large turbinegeneratorstatorwinding', IEEE Trans. Electron. Comput., 1986;EC-1(2):172-9
221. Miller, R., and Hogg, W.K., 'Pulse propagation of slot and internal partial discharges in stator windings of electrical machines', Proceedings of the 4th International Conference on High Voltage Engineering, Athens, September 1983
222. Kurtz, M., and Stone, C.C., 'Generator insulation diagnostic testing', IEEE Trans. Power App. Syst., 1979;PAS-98:1596-603
223. Kurtz, M., Lyles, J.F., and Stone, C.C., 'Experience with the CEA partial discharge test', Proceedings of the Wth Electrical/Electronic Insulation Conference, pp. 65-8
224. Sedding, H.G., Campbell, S.R., Stone, G.C., and Klempner, G.S., 'A new sensor for detecting partial discharges in operating turbine generators', IEEE Transactions on Energy Conversion, December 1991;6(4):700-6
225. James, R.E., and Su, Q., 'Review of some recent developments related to the location of partial discharges in generator stator windings', presented at the IEEE PES winter meeting, New York, January 1992, IEEE/PES Publication 1-800-678-IEEE, 92 THO 425-9 PWR, pp. 7-12
226. James, R.E., Su, Q., Phung, B.T., Foong, S.C., and Tychsen, R.C., 'Location of partial discharges on an 80 MW/12.5 kV hydro-generator with the aid of digital filtering techniques', Proceedings of Electrical Engineers, Australia, November 1990;10(4):338-43
227. Dornerburg, E., Strittmatter, W., 'Monitoring oil cooling transformers by gas analysis', Brown Boveri Review, May 1974;61:238-47
228. Kelly, J.J., 'Transformer fault diagnosis by gas-gas analysis', IEEE Transactions on Industry Applications, December 1980; 16(4):777-82
229. Rogers, R., 'IEEE and IEC codes to interpret incipient faults in transformer, using gas in oil analysis', IEEE Transactions on Electrical Insulation, October 1978;13(5):349-54
230. Lin, C. E., Ling, J. M., and Huang, C. L., 'An expert system for transformer fault diagnosis and maintenance using dissolved gas analysis', IEEE Transactions on Power Delivery, January 1993;8(1):231-38
231. Tomsovic, K., Tapper, M., and Ingvarsson, T., 'A fuzzy information approach to interpreting different transformer diagnostic methods', IEEE Transactions on Power Delivery, July 1993;8(3):1638-46
232. Huang, Y.C., Yang, H.T., and Huang, C.L., 'Developing a new transformer diagnosis system through evolutionary fuzzy logic', IEEE Transactions on Power Delivery, April 1997; 12(2):761-7
233. Wang, Z., Liu, Y., and Griffin, P.J., 'A combined ANN and expert system tool for transformer fault diagnosis', presented at the IEEE PES Winter Meeting, PE-411-PWRD-0-12-1997, New York, February 1998
234. IEC 60599-1999, 'Interpretation of the analysis of gases in transformers and other oil-filled electrical equipment in-service'
235. Zadeh L., Fuzzy Sets, Information and Control, vol. 8 (Academic Press, New York, 1965), pp. 338-53
236. IEEE Std C57.104-1991, IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers, Transformer Committee of IEEE PES, 1991
237. Bell, S.R., The Cauchy Transform, Potential Theory, and Conformal Mapping (CRC Press, Boca Raton, Fl., 1992)
238. Su Q., and Mi, C., 'Fuzzy diagnosis of transformer and generator faults', presented at AUPEC'96, Melbourne University, Melbourne, October 1996, pp. 389-94
239. Su, Q., Mi, C., etal, 'A fuzzy dissolved gas analysis method for the diagnosis of multiple incipient faults in a transformer', IEEE Transactions on Power Systems, May 2000;15(2)593-598
240. Su, Q., 'Reliability centered maintenance of electrical plant - some important issues', presented at AUPEC'97, UNSW, Sydney, September-October 1997, pp. 615-20
241. Su, Q., 'Insulation condition assessment of large generators', presented at the International Power and Energy Conference, Melbourne, 1999, pp. 123-8