Densification of wood veneers combined with oilheat treatment. Part I: Dimensional stability

BioResources

Volumn 6, Issue 1, 2011, Pages 373-385

  Fang, Chang Hua ^a   Cloutier, Alain ^a   Blanchet, Pierre ^a,b   Koubaa, Ahmed ^c   Mariotti, Nicolas ^a  

^a UNIVERSITÉ LAVAL   (Canada)

^b FPINNOVATIONS   (Canada)

^c UNIVERSITÉ DU QUÉBEC EN ABITIBI TÉMISCAMINGUE   (Canada)

Author keywords

Aspen; Compression; Dimensional stability; Heat treatment; Veneer; Wood densification

Indexed keywords

ANTI-SWELLING; ASPEN; BIOLOGICAL ATTACK; COMPRESSION DIRECTIONS; COMPRESSION RECOVERY; COMPRESSION SET; HIGH TEMPERATURE; LONG DURATION; POPULUS TREMULOIDES; WOOD VENEER;

DENSIFICATION; HEAT RESISTANCE; HEAT TREATMENT; RECOVERY; SWELLING; VENEERS; WOOD;

DIMENSIONAL STABILITY;

COMPRESSION; DENSIFICATION; DIMENSIONAL STABILITY; HEAT TREATMENT; POPULUS; RECOVERY; SWELLING; VENEERS; WOOD;

POPULUS TREMULOIDES;

EID: 80054084102     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (37)

1. Bhuiyan, M. T. R., Hirai, N., and Sobue, N. (2000). "Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions," J. Wood. Sci. 46(6), 431-436.
2. Boonstra, M. J., and Blomberg, J. (2007). "Semi-isostatic densification of heat-treated radiata pine," Wood Sci. Technol. 41(7), 607-617.
3. Burmeste, A. (1973). "Effect of heat-pressure-treatments of semi-dry wood on its dmensional stability," Holz. Roh. Werkst. 31(6), 237-243.
4. Fang, C.-H., Mariotti, N., Cloutier, A., Koubaa, A., and Blanchet, P. (2010). "Densification of wood veneers by compression combined with heat and steam," Holz. Roh. Werkst., Submitted.
5. Fang, C.- H., Clair, B., Gril, J., and Almeras, T. (2007). "Transverse shrinkage in Gfibers as a function of cell wall layering and growth strain," Wood Sci. Tech. 41(8), 659-671.
6. Fukuta, S., Asada, F., and Sasaki, Y. (2008). "Manufacture of compressed wood fixed by phenolic resin impregnation through drilled holes," J. Wood. Sci. 54(2), 100-106.
7. Gabrielli, C., and Kamke, F. A. (2008). "Treatment of chemically modified wood with VTC process to improve dimensional stability," Forest. Prod. J. 58(12), 82-86.
8. Gabrielli, C. P., and Kamke, F. A. (2010). "Phenol-formaldehyde impregnation of densified wood for improved dimensional stability," Wood Sci. Tech. 44(1), 95-104.
9. Higashihara, T., Morooka, T., and Norimoto, M. (2000). "Permanent fixation of transversely compressed wood by steaming and its mechanism," Mokuzai Gakkaishi 46(4), 291-297.
10. Hsu, W. E., Schwald, W., Schwald, J., and Shields, J. A. (1988). "Chemical and physical changes required for producing dimensionally stable wood-based composites. 1. steam pretreatment," Wood Sci. Technol. 22(3), 281-289.
11. Inoue, M., Norimoto, M., Tanahashi, M., and Rowell, R. M. (1993a). "Steam or heat fixation of compressed wood," Wood Fiber. Sci. 25(3), 224-235.
12. Inoue, M., Ogata, S., Kawai, S., Rowell, R. M., and Norimoto, M. (1993b). "Fixation of compressed wood using melamine-formaldehyde resin," Wood Fiber. Sci. 25(4), 404-410.
13. Inoue, M., Sekino, N., Morooka, T., Rowell, R. M., and Norimoto, M. (2008). "Fixation of compressive deformation in wood by pre-steaming," J. Trop. Forest. Sci. 20(4), 273-281.
14. Ito, Y., Tanahashi, M., Shigematsu, M., Shinoda, Y., and Ohta, C. (1998). "Compressivemolding of wood by high-pressure steam-treatment: Part 1. Development of compressively molded squares from thinnings," Holzforschung 52(2), 211-216.
15. Johansson, D. (2008). "Heat treatment of solid wood: Effects on absorption, strength and colour," Ph.D thesis, Luleå University of Technology.
16. Kamke, F. A. (2006). "Densified radiate pine for structural composites," Maderas. Ciencia y tecnología 8(2), 83-92.
17. Kelsey, K. E. (1963). A Critical Review of the Relationship between the Shrinkage and Structure of Wood, Commonwealth Scientific and Industrial Research Organization Australia, Melbourne (Australia).
18. Keylwerth, R. (1951). Die anisotrope Elastizität des Holzes und der Lagenholzer [Anisotropy of Elasticity of Wood and Load-Bearing Wood Materials]. VDJ - Forschungsheft 430, Düsseldorf [in German].
19. Kollmann, F. P. (1936). Technologie des Holzes, Springer Verlag, Berlin.
20. Kollmann, F. P., Kuenzi, E. W., and Stamm, A. J. (1975). Principles of Wood Science and Technology, Vol. 2: Wood Based Materials, Springer-Verlag, Berlin/Heidelberg/New York.
21. Korkut, S., and Hiziroglu, S. (2009). "Effect of heat treatment on mechanical properties of hazelnut wood (Corylus columa L.)," Mater. Design. 30(5), 1853-1858.
22. Lyon, F., Thevenon, M. F., Hwang, W. J., Imamura, Y., Gril, J., and Pizzi, A. (2007). "Effect of an oil heat treatment on the leachability and biological resistance of boric acid impregnated wood," Ann. For. Sci. 64(6), 673-678.
23. Morsing, N. (2000). "Densification of wood - The influence of hygrothermal treatment on compression of beech perpendicular to the grain," Ph.D, Technical university of Denmark, Kgs. Lyngby.
24. Navi, P., and Girardet, F. (2000). "Effects of thermo-hydro-mechanical treatment on the structure and properties of wood," Holzforschung 54(3), 287-293.
25. Navi, P., and Heger, F. (2004). "Combined densification and thermo-hydro-mechanical processing of wood," Materials Research Society Bulletin 29(5), 332-336.
26. Norimoto, M., Ota, C., Akitsu, H., and Yamada, T. (1993). "Permanent fixation of bending deformation in wood by heat treatment," Wood research: bulletin of the Wood Research Institute Kyoto University 79, 23-33.
27. Obataya, E., Shibutani, S., Hanata, K., and Doi, S. (2006). "Effects of high temperature kiln drying on the practical performances of Japanese cedar wood (Cryptomeria japonica) I: changes in hygroscopicity due to heating," J. Wood. Sci. 52(1), 33-38.
28. Poncsak, S., Kocaefe, D., Bouazara, M., and Pichette, A. (2006). "Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera)," Wood Sci. Technol. 40(8), 647-663.
29. Rapp, A. O., Brischke, C., and Welzbacher, C. R. (2006). "Interrelationship between the severity of heat treatments and sieve fractions after impact ball milling: A mechanical test for quality control of thermally modified wood," Holzforschung 60(1), 64-70.
30. Rowell, R. M., Tillman, A. M., and Zhengtian, L. (1986). "Dimensional stabilization of flakeboard by chemical modification," Wood Sci. Technol. 20(1), 83-95.
31. Sailer, M., Rapp, A. O., Leithoff, H., and Peek, R. D. (2000). "Upgrading of wood by application of an oil-heat treatment," Holz. Roh. Werkst. 58(1-2), 15-22.
32. Seborg, R. M., Millett, M. A., and Stamm, A. J. (1945). "Heat-stabilized compressed wood (Staypak)," Mech. Eng. 67(1), 25-31.
33. Stamm, A. J., Burr, H. K., and Kline, A. A. (1946). "Staybwood ... Heat-stabilized wood." Industrial and Engineering Chemistry 38(6), 630-634.
34. Tang, X. S., Nakao, T., and Zhao, G. J. (2004). "Physical properties of compressed wood fixed via different heating pathways to obtain a constant recovery," Mokuzai Gakkaishi 50(5), 333-340.
35. Wang, J. Y., and Cooper, P. A. (2005). "Effect of oil type, temperature and time on moisture properties of hot oil-treated wood," Holz. Roh. Werkst. 63(6), 417-422.
36. Welzbacher, C. R., Wehsener, J., Rapp, A. O., and Haller, P. (2008). "Thermomechanical densification combined with thermal modification of Norway spruce (Picea abies Karst) in industrial scale - Dimensional stability and durability aspects," Holz. Roh. Werkst. 66(1), 39-49.
37. Zaman, A., Alen, R., and Kotilainen, R. (2000). "Thermal behavior of scots pine (Pinus sylvestris) and silver birch (Betula pendula) at 200-230 degrees C," Wood Fiber. Sci., 32(2), 138-143.