From landfilling to vitrimer chemistry in rubber life cycle

European Polymer Journal

Volumn 82, Issue , 2016, Pages 347-376

  Imbernon, Lucie ^a   Norvez, Sophie ^a  

^a PSL RESEARCH UNIVERSITY   (France)

Author keywords

Covalent reversible chemistry; Recycling; Rubber waste management; Thermoplastic elastomer; Vitrimer

Indexed keywords

CROSSLINKING; HYDROGEN BONDS; LAND FILL; LIFE CYCLE; RECYCLING; REINFORCED PLASTICS; SUPRAMOLECULAR CHEMISTRY; THERMOPLASTIC ELASTOMERS;

ELASTOMERIC PROPERTIES; END OF LIFE MANAGEMENTS; ENVIRONMENTAL PROBLEMS; HIGH MECHANICAL PROPERTIES; PHYSICAL CROSS-LINKS; RUBBER WASTES; SUPRAMOLECULAR INTERACTIONS; VITRIMER;

RUBBER;

EID: 84975514945     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2016.03.016     Document Type: Review

References (225)

1. [1] De Gennes, P.-G., Scaling Concepts in Polymer Physics. 1979, Cornell University Press.
2. [2] Doi, M., Edwards, S.F., The Theory of Polymer Dynamics. 1988, Oxford University Press, USA.
3. [3] US 6512051 B2 Pat., 2003.
4. [4] Montarnal, D., Capelot, M., Tournilhac, F., Leibler, L., Science 334 (2011), 965–968.
5. [5] Treloar, L.R.G., The Physics of Rubber Elasticity. 1975, Oxford University Press.
6. [6] Chan, B.L., Elliott, D.J., Holley, M., Smith, J.F., J. Polym. Sci.: Polym. Symp. 48 (1974), 61–86.
7. [7] Coran, A., J. Appl. Polym. Sci. 87 (2003), 24–30.
8. [8] Liu, X., Zhou, T., Liu, Y., Zhang, A., Yuan, C., Zhang, W., RSC Adv. 5 (2015), 10231–10242.
9. [9] Kuhn, W., Grun, F., Kolloid-Z. 101 (1942), 248–271.
10. [10] Guth, E., James, H., Mark, H., Adv. Colloid Sci., 2, 1946, 253.
11. [11] Flory, P.J., Chem. Rev. 35 (1944), 51–75.
12. [12] Flory, P.J., Polym. J. 17 (1985), 1–12.
13. [13] Gee, G., Trans. Faraday Soc. 42 (1946), 585–598.
14. [14] Nascimento, R.M., Faita, F.L., Agostini, D.L.S., Job, A.E., Guimarães, F.E.G., Bechtold, I.H., Mater. Sci. Eng. C 39 (2014), 29–34.
15. [15] Diaporama 150 ans SNCP Etat de la filière en 2013, Syndicat National du Caoutchouc et des Polymères < http://www.lecaoutchouc.fr/>.
16. [16] Lucignano, C., Gugliemotti, A., Quadrini, F., Polym.-Plast. Technol. Eng. 51 (2012), 340–344.
17. [17] Karger-Kocsis, J., Mészáros, L., Bárány, T., J. Mater. Sci. 48 (2013), 1–38.
18. [18] Myhre, M., Saiwari, S., Dierkes, W., Noordermeer, J., Rubber Chem. Technol. 85 (2012), 408–449.
19. [19] Adhikari, B., De, D., Maiti, S., Prog. Polym. Sci. 25 (2000), 909–948.
20. [20] Landfill of Waste Directive. European Commission, Brussels, Belgium. Council Directive 1999/31/EC, 1999.
21. [21] Miranda, M., Pinto, F., Gulyurtlu, I., Cabrita, I., Fuel 103 (2013), 542–552.
22. [22] Undri, A., Rosi, L., Frediani, M., Frediani, P., Fuel 115 (2014), 600–608.
23. [23] Ahmed, R., van de Klundert, A., Lardinois, I., RUBBER WASTE Options for Small-scale Resource Recovery. Urban Solid Waste Series, vol. 3, 1996.
24. [24] Wang, H., Davidson, M., Zuo, Y., Ren, Z., J. Power Sources 196 (2011), 5863–5866.
25. [25] Pérez, G., Vila, A., Rincón, L., Solé, C., Cabeza, L.F., Appl. Energy 97 (2012), 347–354.
26. [26] Alamo-Nole, L., Perales-Perez, O., Roman, F.R., Desalin. Water Treatm. 49 (2012), 296–306.
27. [27] Maderuelo-Sanz, R., Martín-Castizo, M., Vílchez-Gómez, R., Appl. Acoust. 72 (2011), 823–828.
28. [28] Maderuelo-Sanz, R., Nadal-Gisbert, A.V., Crespo-Amorós, J.E., Parres-García, F., Appl. Acoust. 73 (2012), 402–408.
29. [29] Mészáros, L., Bárány, T., Czvikovszky, T., Radiat. Phys. Chem. 81 (2012), 1357–1360.
30. [30] Zhang, X., Lu, C., Liang, M., J. Polym. Res. 16 (2009), 411–419.
31. [31] Roche, N., Ichchou, M.N., Salvia, M., Chettah, A., J. Elastomers Plast. 43 (2011), 317–340.
32. [32] Ramarad, S., Khalid, M., Ratnam, C., Chuah, A.L., Rashmi, W., Prog. Mater. Sci. 72 (2015), 100–140.
33. [33] Shu, X., Huang, B., Constr. Build. Mater. 67:Part B (2014), 217–224.
34. [34] Lo Presti, D., Constr. Build. Mater. 49 (2013), 863–881.
35. [35] Eldin, N.N., Senouci, A.B., Cem. Concr. Aggr. 15 (1993), 74–84.
36. [36] Pacheco-Torgal, F., Ding, Y., Jalali, S., Constr. Build. Mater. 30 (2012), 714–724.
37. [37] Tobolsky, A.V., MacKnight, W.J., Takahashi, M., J. Phys. Chem. 68 (1964), 787–790.
38. [38] U.S. Patent 4244841 Pat., 1981.
39. [39] U.S. Patent 0101004 A1 Pat., 2002.
40. [40] Tripathy, A.R., Morin, J.E., Williams, D.E., Eyles, S.J., Farris, R.J., Macromolecules 35 (2002), 4616–4627.
41. [41] U.S. Patent 5904885 Pat., 1999.
42. [42] Bilgili, E., Dybek, A., Arastoopour, H., Bernstein, B., J. Elastomers Plast. 35 (2003), 235–256.
43. [43] Gugliemotti, A., Lucignano, C., Quadrini, F., Plast, Rubber Compos. 41 (2012), 40–46.
44. [44] Yazdani, H., Karrabi, M., Ghasmi, I., Azizi, H., Bakhshandeh, G.R., J. Vinyl Add. Technol. 17 (2011), 64–69.
45. [45] Tao, G., He, Q., Xia, Y., Jia, G., Yang, H., Ma, W., J. Appl. Polym. Sci. 129 (2013), 2598–2605.
46. [46] Liang, S.B., Hu, D.P., Zhu, C., Yu, A.B., Chem. Eng. Technol. 25 (2002), 401–405.
47. [47] Garcia, P.S., de Sousa, F.D.B., de Lima, J.A., Cruz, S.A., Scuracchio, C.H., Exp. Polym. Lett. 9 (2015), 1015–1026.
48. [48] Zanchet, A., Carli, L.N., Giovanela, M., Crespo, J.S., Scuracchio, C.H., Nunes, R.C.R., J. Elastomers Plast. 41 (2009), 497–507.
49. [49] Isayev, A.I., Chen, J., Tukachinsky, A., Rubber Chem. Technol. 68 (1995), 267–280.
50. [50] Tapale, M., Isayev, A.I., J. Appl. Polym. Sci. 70 (1998), 2007–2019.
51. [51] Le Neindre, M., Nicolay, R., Polym. Chem. 5 (2014), 4601–4611.
52. [52] Rooj, S., Basak, G.C., Maji, P.K., Bhowmick, A.K., J. Polym. Environ. 19 (2011), 382–390.
53. [53] Sabzekar, M., Chenar, M.P., Mortazavi, S.M., Kariminejad, M., Asadi, S., Zohuri, G., Polym. Degrad. Stab. 118 (2015), 88–95.
54. [54] Dubkov, K., Semikolenov, S., Ivanov, D., Babushkin, D., Voronchikhin, V., Iran Polym. J. 23 (2014), 881–890.
55. [55] Dubkov, K.A., Semikolenov, S.V., Ivanov, D.P., Babushkin, D.E., Panov, G.I., Parmon, V.N., Polym. Degrad. Stab. 97 (2012), 1123–1130.
56. [56] Sadaka, F., Campistron, I., Laguerre, A., Pilard, J.-F., Polym. Degrad. Stab. 98 (2013), 736–742.
57. [57] Yazdani, H., Ghasemi, I., Karrabi, M., Azizi, H., Bakhshandeh, G.R., J. Vinyl Add. Technol. 19 (2013), 65–72.
58. [58] Paulo, G.D., Hirayama, D., Saron, C., Adv. Mater. Res. 418–420 (2012), 1072–1075.
59. [59] Ikeda, Y., Kohjiya, S., Ikeda, Y., (eds.) Chemistry, Manufacture and Applications of Natural Rubber, 2014, Woodhead Publishing, 436–451.
60. [60] Li, Y., Zhao, S., Wang, Y., J. Polym. Environ. 20 (2012), 372–380.
61. [61] Yao, C., Zhao, S., Wang, Y., Wang, B., Wei, M., Hu, M., Polym. Degrad. Stab. 98 (2013), 1724–1730.
62. [62] De, D., Maiti, S., Adhikari, B., J. Appl. Polym. Sci. 73 (1999), 2951–2958.
63. [63] Basfar, A.A., Abdel-Aziz, M.M., Mofti, S., Radiat. Phys. Chem. 63 (2002), 81–87.
64. [64] Fu, L., Lei, Z., Xu, C., Chen, Y., Mater. Chem. Phys. 170 (2016), 193–200.
65. [65] Zhang, Y., Yang, B., Zhang, X., Xu, L., Tao, L., Li, S., Wei, Y., Chem. Commun. 48 (2012), 9305–9307.
66. [66] Hunt, J.N., Feldman, K.E., Lynd, N.A., Deek, J., Campos, L.M., Spruell, J.M., Hernandez, B.M., Kramer, E.J., Hawker, C.J., Adv. Mater. 23 (2011), 2327–2331.
67. [67] Gong, J.P., Soft Matter 6 (2010), 2583–2590.
68. [68] Capelot, M., Montarnal, D., Tournilhac, F., Leibler, L., J. Am. Chem. Soc. 134 (2012), 7664–7667.
69. [69] Cordier, P., Tournilhac, F., Soulié-Ziakovic, C., Leibler, L., Nature 451 (2008), 977–980.
70. [70] Wool, R.P., Soft Matter 4 (2008), 400–418.
71. [71] Hager, M.D., Greil, P., Leyens, C., van der Zwaag, S., Schubert, U.S., Adv. Mater. 22 (2010), 5424–5430.
72. [72] Garcia, S.J., Eur. Polym. J. 53 (2014), 118–125.
73. [73] Lu, Y.-X., Tournilhac, F., Leibler, L., Guan, Z., J. Am. Chem. Soc. 134 (2012), 8424–8427.
74. [74] Rekondo, A., Martin, R., de Luzuriaga, A.R., Cabañero, G., Grande, H.J., Odriozola, I., Mater. Horizons 1 (2014), 237–240.
75. [75] AbdolahZadeh, M., Esteves, C., Catarina, A., Zwaag, S., Garcia, S.J., J. Polym. Sci. Part A: Polym. Chem. 52 (2014), 1953–1961.
76. [76] Pepels, M., Filot, I., Klumperman, B., Goossens, H., Polym. Chem. 4 (2013), 4955–4965.
77. [77] Lu, Y.-X., Guan, Z., J. Am. Chem. Soc. 134 (2012), 14226–14231.
78. [78] Imbernon, L., Oikonomou, E., Norvez, S., Leibler, L., Polym. Chem. 6 (2015), 4271–4278.
79. [79] Martin, R., Rekondo, A., de Luzuriaga, A.R., Cabañero, G., Grande, H.J., Odriozola, I., J. Mater. Chem. A 2 (2014), 5710–5715.
80. [80] Grande, A., Garcia, S., van der Zwaag, S., Polymer 56 (2015), 435–442.
81. [81] Brutman, J.P., Delgado, P.A., Hillmyer, M.A., ACS Macro Lett. 3 (2014), 607–610.
82. [82] Denissen, W., Rivero, G., Nicolaÿ, R., Leibler, L., Winne, J.M., Du Prez, F.E., Adv. Funct. Mater. 25 (2015), 2451–2457.
83. [83] Obadia, M.M., Mudraboyina, B.P., Serghei, A., Montarnal, D., Drockenmuller, E., J. Am. Chem. Soc. 137 (2015), 6078–6083.
84. [84] Chasset, R., Thirion, P., Proceedings of the International Conference on Non-Crystalline Solids, 1965.
85. [85] Curro, J.G., Pincus, P., Macromolecules 16 (1983), 559–562.
86. [86] Rahman, M.A., Sartore, L., Bignotti, F., Di Landro, L., ACS Appl. Mater. Interf. 5 (2013), 1494–1502.
87. [87] Imbernon, L., Norvez, S., Leibler, L., Macromolecules, 2016, 10.1021/acs.macromol.5b02751.
88. [88] Billiet, S., Hillewaere, X.K.D., Teixeira, R.F.A., Du Prez, F.E., Macromol. Rapid Commun. 34 (2013), 290–309.
89. [89] Burattini, S., Greenland, B.W., Chappell, D., Colquhoun, H.M., Hayes, W., Chem. Soc. Rev. 39 (2010), 1973–1985.
90. [90] Tyagi, P., Deratani, A., Quemener, D., Israel J. Chem. 53 (2013), 53–60.
91. [91] Drobny, J.G., Handbook of Thermoplastic Elastomers. second ed., 2014, Elsevier.
92. [92] Spontak, R.J., Patel, N.P., Curr. Opin. Colloid Interf. Sci. 5 (2000), 333–340.
93. [93] Cooper, S.L., Tobolsky, A.V., J. Appl. Polym. Sci. 10 (1966), 1837–1844.
94. [94] Leibler, L., Macromolecules 13 (1980), 1602–1617.
95. [95] Wang, Z., Yuan, L., Trenor, N.M., Vlaminck, L., Billiet, S., Sarkar, A., Du Prez, F.E., Stefik, M., Tang, C., Green Chem. 17 (2015), 3806–3818.
96. [96] Karger-Kocsis, J., Karger-Kocsis, J., (eds.) Polypropylene, vol. 2, 1999, Springer, Netherlands, 853–858 (ch. 116).
97. [97] Coran, A.Y., Patel, R.P., Karger-Kocsis, J., (eds.) Polypropylene Structure, blends and composites, 1995, Springer, Netherlands, 162–201 (Chapter 6).
98. [98] Kumar, C.R., Fuhrmann, I., Karger-Kocsis, J., Polym. Degrad. Stab. 76 (2002), 137–144.
99. [99] Drobny, J.G., Handbook of Thermoplastic Elastomers, 2007, William Andrew Publishing, Norwich, NY, 215–234 (Chapter 9).
100. [100] Smart, S.K., Edwards, G.A., Martin, D.J., Rubber Nanocomposites, 2010, John Wiley & Sons, Ltd, 239–254.
101. [101] Houton, K.A., Wilson, A.J., Polym. Int. 64 (2015), 165–173.
102. [102] Krol, P., Prog. Mater. Sci. 52 (2007), 915–1015.
103. [103] He, Y., Xie, D., Zhang, X., J. Mater. Sci. 49 (2014), 7339–7352.
104. [104] Sánchez-Adsuar, M., Papon, E., Villenave, J.J., J. Appl. Polym. Sci. 76 (2000), 1602–1607.
105. [105] Sánchez-Adsuar, M., Papon, E., Villenave, J.J., J. Appl. Polym. Sci. 76 (2000), 1596–1601.
106. [106] Sánchez-Adsuar, M., Papon, E., Villenave, J.J., J. Appl. Polym. Sci. 76 (2000), 1590–1595.
107. [107] Rabani, G., Rosair, G.M., Kraft, A., J. Polym. Sci. Part A: Polym. Chem. 42 (2004), 1449–1460.
108. [108] Joel, D., Hauser, A., Die Angewandte Makromolekulare Chemie 217 (1994), 191–199.
109. [109] Schüssele, A.C., Nübling, F., Thomann, Y., Carstensen, O., Bauer, G., Speck, T., Mülhaupt, R., Macromol. Mater. Eng. 297 (2012), 411–419.
110. [110] Coran, A., Patel, R., Rubber Chem. Technol. 54 (1981), 892–903.
111. [111] Morton, M., Rubber Chem. Technol. 56 (1983), 1096–1110.
112. [112] Gall, B.T., Thomann, R., Mülhaupt, R., J. Polym. Sci. Part A: Polym. Chem. 49 (2011), 2339–2345.
113. [113] Nakayama, Y., Aihara, K., Yamanishi, H., Fukuoka, H., Tanaka, R., Cai, Z., Shiono, T., J. Polym. Sci. Part A: Polym. Chem. 53 (2015), 489–495.
114. [114] Bishop, J.P., Register, R.A., Macromolecules 43 (2010), 4954–4960.
115. [115] Gall, B.T., McCahill, J., Stephan, D.W., Mülhaupt, R., Macromol. Rapid Commun. 29 (2008), 1549–1553.
116. [116] Chen, Y., Kushner, A.M., Williams, G.A., Guan, Z., Nat. Chem. 4 (2012), 467–472.
117. [117] Hentschel, J., Kushner, A.M., Ziller, J., Guan, Z., Angew. Chem. Int. Ed. 51 (2012), 10561–10565.
118. [118] Gooch, A., Nedolisa, C., Houton, K.A., Lindsay, C.I., Saiani, A., Wilson, A.J., Macromolecules 45 (2012), 4723–4729.
119. [119] Wang, X., Vapaavuori, J., Zhao, Y., Bazuin, C.G., Macromolecules 47 (2014), 7099–7108.
120. [120] Eisenberg, A., Ions in Polymers. 1980, American Chemical Society, Washington, DC.
121. [121] Tant, M.R., Mauritz, K.A., Wilkes, G.L., Ionomers: Synthesis, Structure, Properties and Applications. 1997, Springer Science & Business Media.
122. [122] Antony, P., De, S.K., J. Macromol. Sci. Part C 41 (2001), 41–77.
123. [123] Cooper, W., J. Polym. Sci. 28 (1958), 195–206.
124. [124] Agarwal, P.K., Lundberg, R.D., Macromolecules 17 (1984), 1918–1928.
125. [125] MacKnight, W.J., Lundberg, R.D., Rubber Chem. Technol. 57 (1984), 652–663.
126. [126] Paeglis, A.U., O'Shea, F.X., Rubber Chem. Technol. 61 (1988), 223–237.
127. [127] Lundberg, R.D., Makowski, H.S., Ions in Polymers, vol. 187, 1980, American Chemical Society, 21–36 (Chapter 2).
128. [128] Phinyocheep, P., Kohjiya, S., Ikeda, Y., (eds.) Chemistry, Manufacture and Applications of Natural Rubber, 2014, Woodhead Publishing, 68–118.
129. [129] Xavier, T., Samuel, J., Kurian, T., Int. J. Polym. Mater. Polym. Biomater. 52 (2003), 251–264.
130. [130] Ibarra, L., Alzorriz, M., J. Appl. Polym. Sci. 87 (2003), 805–813.
131. [131] Ibarra, L., Alzorriz, M., J. Appl. Polym. Sci. 103 (2007), 1894–1899.
132. [132] van der Mee, M.A.J., l'Abee, R.M.A., Portale, G., Goossens, J.G.P., van Duin, M., Macromolecules 41 (2008), 5493–5501.
133. [133] Hohlbein, N., Shaaban, A., Bras, A., Pyckhout-Hintzen, W., Schmidt, A., Phys. Chem. Chem. Phys. 17 (2015), 21005–21017.
134. [134] Potier, F., Guinault, A., Delalande, S., Sanchez, C., Ribot, F., Rozes, L., Polym. Chem. 5 (2014), 4474–4479.
135. [135] Das, A., Sallat, A., Böhme, F., Suckow, M., Basu, D., Wießner, S., Stöckelhuber, K.W., Voit, B., Heinrich, G., ACS Appl. Mater. Interf. 7 (2015), 20623–20630.
136. [136] Yoon, J., Lee, H.-J., Stafford, C.M., Macromolecules 44 (2011), 2170–2178.
137. [137] Leong, K.-W., Butler, G.B., J. Macromol. Sci.: Part A – Chem. 14 (1980), 287–319.
138. [138] Stadler, R., de Lucca Freitas, L., Colloid Polym. Sci. 264 (1986), 773–778.
139. [139] Hilger, C., Stadler, R., Die Makromolekulare Chemie 191 (1990), 1347–1361.
140. [140] Hilger, C., Stadler, R., Macromolecules 25 (1992), 6670–6680.
141. [141] Hellmann, J., Hilger, C., Stadler, R., Polym. Adv. Technol. 5 (1994), 763–774.
142. [142] Peng, C.-C., Abetz, V., Macromolecules 38 (2005), 5575–5580.
143. [143] Chino, K., Ashiura, M., Macromolecules 34 (2001), 9201–9204.
144. [144] Chino, K., Kgk-Kautschuk Gummi Kunststoffe 59 (2006), 158–162.
145. [145] Kashif, M., Chang, Y.-W., Polym. Int. 63 (2014), 1936–1943.
146. [146] Chang, Y.-W., Mishra, J.K., Kim, S.-K., Kim, D.-K., Mater. Lett. 60 (2006), 3118–3121.
147. [147] Wang, D., Zhang, H., Cheng, B., Qian, Z., Liu, W., Zhao, N., Xu, J., J. Polym. Sci. Part A: Polym. Chem., 2015, 10.1002/pola.27983.
148. [148] Kautz, H., Van Beek, D., Sijbesma, R.P., Meijer, E., Macromolecules 39 (2006), 4265–4267.
149. [149] Appel, W.P.J., Portale, G., Wisse, E., Dankers, P.Y.W., Meijer, E.W., Macromolecules 44 (2011), 6776–6784.
150. [150] Roy, N., Buhler, E., Lehn, J.-M., Chem. – Eur. J. 19 (2013), 8814–8820.
151. [151] Colombani, O., Barioz, C., Bouteiller, L., Chanéac, C., Fompérie, L., Lortie, F., Montès, H., Macromolecules 38 (2005), 1752–1759.
152. [152] Lehn, J.-M., Sanders, J., Angew. Chem. – English Ed., 34, 1995, 2563.
153. [153] Montarnal, D., Cordier, P., Soulié-Ziakovic, C., Tournilhac, F., Leibler, L., J. Polym. Sci. Part A: Polym. Chem. 46 (2008), 7925–7936.
154. [154] Montarnal, D., Tournilhac, F., Hidalgo, M., Couturier, J.-L., Leibler, L., J. Am. Chem. Soc. 131 (2009), 7966–7967.
155. [155] Tournilhac, F., Cordier, P., Montarnal, D., Soulié-Ziakovic, C., Leibler, L., Macromol. Symp. 291–292 (2010), 84–88.
156. [156] Cortese, J., Soulié-Ziakovic, C., Cloitre, M., Tencé-Girault, S., Leibler, L., J. Am. Chem. Soc. 133 (2011), 19672–19675.
157. [157] Cortese, J., Soulié-Ziakovic, C., Tencé-Girault, S., Leibler, L., J. Am. Chem. Soc. 134 (2012), 3671–3674.
158. [158] Maes, F., Montarnal, D., Cantournet, S., Tournilhac, F., Corte, L., Leibler, L., Soft Matter 8 (2012), 1681–1687.
159. [159] Zhang, A., Yang, L., Lin, Y., Yan, L., Lu, H., Wang, L., J. Appl. Polym. Sci. 129 (2013), 2435–2442.
160. [160] Sun, C., Van der Mee, M., Goossens, J., Van Duin, M., Macromolecules 39 (2006), 3441–3449.
161. [161] Shen, F., Li, H., Wu, C., J. Polym. Sci. Part B: Polym. Phys. 44 (2006), 378–386.
162. [162] Ibarra, L., Rodríguez, A., Mora-Barrantes, I., Polym. Int. 58 (2009), 218–226.
163. [163] Burattini, S., Colquhoun, H.M., Greenland, B.W., Hayes, W., Faraday Discuss. 143 (2009), 251–264.
164. [164] Burattini, S., Greenland, B.W., Merino, D.H., Weng, W., Seppala, J., Colquhoun, H.M., Hayes, W., Mackay, M.E., Hamley, I.W., Rowan, S.J., J. Am. Chem. Soc. 132 (2010), 12051–12058.
165. [165] Nakahata, M., Takashima, Y., Yamaguchi, H., Harada, A., Nat. Commun., 2, 2011, 511.
166. [166] Kakuta, T., Takashima, Y., Harada, A., Macromolecules 46 (2013), 4575–4579.
167. [167] Ji, X., Chen, J., Xue, M., Macromol. Chem. Phys. 215 (2014), 536–543.
168. [168] Dionisio, M., Ricci, L., Pecchini, G., Masseroni, D., Ruggeri, G., Cristofolini, L., Rampazzo, E., Dalcanale, E., Macromolecules 47 (2014), 632–638.
169. [169] Ruiz de Luzuriaga, A., Rekondo, A., Martin, R., Cabañero, G., Grande, H.J., Odriozola, I., J. Polym. Sci. Part A: Polym. Chem. 53 (2015), 1061–1066.
170. [170] Peng, C.-C., Göpfert, A., Drechsler, M., Abetz, V., Polym. Adv. Technol. 16 (2005), 770–782.
171. [171] Wong, W.K., Macromol. Symp. 221 (2005), 137–144.
172. [172] Bokern, S., Fan, Z., Mattheis, C., Greiner, A., Agarwal, S., Macromolecules 44 (2011), 5036–5042.
173. [173] Martin, R., Rekondo, A., Echeberria, J., Cabanero, G., Grande, H.J., Odriozola, I., Chem. Commun. 48 (2012), 8255–8257.
174. [174] Wang, C., Liu, N., Allen, R., Tok, J.B.H., Wu, Y., Zhang, F., Chen, Y., Bao, Z., Adv. Mater. 25 (2013), 5785–5790.
175. [175] Gheneim, R., Perez-Berumen, C., Gandini, A., Macromolecules 35 (2002), 7246–7253.
176. [176] Watanabe, M., Yoshie, N., Polymer 47 (2006), 4946–4952.
177. [177] Trovatti, E., Lacerda, T.M., Carvalho, A.J.F., Gandini, A., Adv. Mater. 27 (2015), 2242–2245.
178. [178] Bai, J., Li, H., Shi, Z., Yin, J., Macromolecules 48 (2015), 3539–3546.
179. [179] Polgar, L.M., van Duin, M., Broekhuis, A.A., Picchioni, F., Macromolecules 48 (2015), 7096–7105.
180. [180] Boul, P.J., Reutenauer, P., Lehn, J.-M., Org. Lett. 7 (2005), 15–18.
181. [181] Reutenauer, P., Buhler, E., Boul, P.J., Candau, S.J., Lehn, J.M., Chem. – Eur. J. 15 (2009), 1893–1900.
182. [182] Scott, T.F., Schneider, A.D., Cook, W.D., Bowman, C.N., Science 308 (2005), 1615–1617.
183. [183] Amamoto, Y., Kamada, J., Otsuka, H., Takahara, A., Matyjaszewski, K., Angew. Chem. 123 (2011), 1698–1701.
184. [184] Amamoto, Y., Otsuka, H., Takahara, A., Matyjaszewski, K., Adv. Mater. 24 (2012), 3975–3980.
185. [185] Canadell, J., Goossens, H., Klumperman, B., Macromolecules 44 (2011), 2536–2541.
186. [186] Lei, Z.Q., Xiang, H.P., Yuan, Y.J., Rong, M.Z., Zhang, M.Q., Chem. Mater. 26 (2014), 2038–2046.
187. [187] Takahashi, A., Ohishi, T., Goseki, R., Otsuka, H., Polymer 82 (2016), 319–326.
188. [188] Casuso, P., Odriozola, I., Pérez-San Vicente, A., Loinaz, I., Cabañero, G., Grande, H.-J., Dupin, D., Biomacromolecules 16 (2015), 3552–3561.
189. [189] Xiang, H., Qian, H., Lu, Z., Rong, M., Zhang, M., Green Chem. 17 (2015), 4315–4325.
190. [190] Pire, M., Norvez, S., Iliopoulos, I., Le Rossignol, B., Leibler, L., Polymer 51 (2010), 5903–5909.
191. [191] Pire, M., Norvez, S., Iliopoulos, I., Le Rossignol, B., Leibler, L., Polymer 52 (2011), 5243–5249.
192. [192] Pire, M., Lorthioir, C., Oikonomou, E.K., Norvez, S., Iliopoulos, I., Le Rossignol, B., Leibler, L., Polym. Chem. 3 (2012), 946–953.
193. [193] Pire, M., Oikonomou, E.K., Imbernon, L., Lorthioir, C., Iliopoulos, I., Norvez, S., Macromol. Symp. 331–332 (2013), 89–96.
194. [194] Pire, M., Norvez, S., Iliopoulos, I., Le Rossignol, B., Leibler, L., Compos. Interf. 21 (2014), 45–50.
195. [195] Imbernon, L., Pire, M., Oikonomou, E.K., Norvez, S., Macromol. Chem. Phys. 214 (2013), 806–811.
196. [196] Ding, C., Matharu, A.S., ACS Sustain. Chem. Eng. 2 (2014), 2217–2236.
197. [197] US3898253 A Pat., 1975.
198. [198] US6559263 B1 Pat., 2003.
199. [199] US20070149711 A1 Pat., 2007.
200. [200] Ying, H., Zhang, Y., Cheng, J., Nat. Commun. 5 (2014), 3218–3226.
201. [201] Dodge, L., Chen, Y., Brook, M.A., Chem. – Eur. J. 20 (2014), 9349–9356.
202. [202] Imato, K., Takahara, A., Otsuka, H., Macromolecules 48 (2015), 5632–5639.
203. [203] Yuan, C., Rong, M.Z., Zhang, M.Q., Polymer 55 (2014), 1782–1791.
204. [204] Zhang, Z.P., Rong, M.Z., Zhang, M.Q., Polymer 55 (2014), 3936–3943.
205. [205] Espeel, P., Du Prez, F.E., Macromolecules 48 (2015), 2–14.
206. [206] Billiet, S., De Bruycker, K., Driessen, F., Goossens, H., Van Speybroeck, V., Winne, J.M., Du Prez, F.E., Nat. Chem. 6 (2014), 815–821.
207. [207] Denissen, W., Winne, J.M., Du Prez, F.E., Chem. Sci. 7 (2015), 30–38.
208. [208] Capelot, M., Unterlass, M.M., Tournilhac, F., Leibler, L., ACS Macro Lett. 1 (2012), 789–792.
209. [209] Fortman, D.J., Brutman, J.P., Cramer, C.J., Hillmyer, M.A., Dichtel, W.R., J. Am. Chem. Soc. 137 (2015), 14019–14022.
210. [210] Li, H., Bai, J., Shi, Z., Yin, J., Polymer 85 (2016), 106–113.
211. [211] Zheng, P., McCarthy, T.J., J. Am. Chem. Soc. 134 (2012), 2024–2027.
212. [212] Schmolke, W., Perner, N., Seiffert, S., Macromolecules 48 (2015), 8781–8788.
213. [213] Cromwell, O.R., Chung, J., Guan, Z., J. Am. Chem. Soc. 137 (2015), 6492–6495.
214. [214] Pei, Z., Yang, Y., Chen, Q., Terentjev, E.M., Wei, Y., Ji, Y., Nat. Mater. 13 (2014), 36–41.
215. [215] Ducrot, E., Chen, Y., Bulters, M., Sijbesma, R.P., Creton, C., Science 344 (2014), 186–189.
216. [216] Ducrot, E., Montes, H., Creton, C., Macromolecules 48 (2015), 7945–7952.
217. [217] Gold, B.J., Hövelmann, C.H., Weiss, C., Radulescu, A., Allgaier, J., Pyckhout-Hintzen, W., Wischnewski, A., Richter, D., Polymer 87 (2016), 123–128.
218. [218] Lenko, D., Schlögl, S., Temel, A., Schaller, R., Holzner, A., Kern, W., J. Appl. Polym. Sci. 129 (2013), 2735–2743.
219. [219] Montarnal, D., Tournilhac, F., Hidalgo, M., Leibler, L., J. Polym. Sci. Part A: Polym. Chem. 48 (2010), 1133–1141.
220. [220] Mora-Barrantes, I., Malmierca, M., Valentin, J., Rodriguez, A., Ibarra, L., Soft Matter 8 (2012), 5201–5213.
221. [221] Roy, N., Buhler, E., Lehn, J.M., Polym. Int. 63 (2014), 1400–1405.
222. [222] Zhang, B., Digby, Z.A., Flum, J.A., Foster, E.M., Sparks, J.L., Konkolewicz, D., Polym. Chem. 6 (2015), 7368–7372.
223. [223] Neal, J.A., Mozhdehi, D., Guan, Z., J. Am. Chem. Soc. 137 (2015), 4846–4850.
224. [224] Sordo, F., Mougnier, S.-J., Loureiro, N., Tournilhac, F., Michaud, V., Macromolecules 48 (2015), 4394–4402.
225. [225] Martin, R., Rekondo, A., Ruiz de Luzuriaga, A., Santamaria, A., Odriozola, I., RSC Adv. 5 (2015), 17514–17518.