Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices

European Journal of Pharmaceutical Sciences

Volumn 90, Issue , 2016, Pages 53-63

  Genina, Natalja ^a,b   Holländer, Jenny ^a   Jukarainen, Harri ^c   Mäkilä, Ermei ^d   Salonen, Jarno ^d   Sandler, Niklas ^a  

^a ÅBO AKADEMI UNIVERSITY   (Finland)

^b UNIVERSITY OF COPENHAGEN   (Denmark)

^c BAYER AG   (Germany)

^d UNIVERSITY OF TURKU   (Finland)

Author keywords

3D printing; Controlled drug delivery; EVA copolymer; Hot melt extrusion; Indomethacin; Medical devices

Indexed keywords

DRUG CARRIER; ETHYLENE VINYL ACETATE COPOLYMER; INDOMETACIN; VINYL ACETATE; ETHYLENEVINYLACETATE COPOLYMER; POLYVINYL DERIVATIVE;

ARTICLE; CUSTOM MADE T SHAPED INTRAUTERINE SYSTEM; DRUG DELIVERY DEVICE; DRUG RELEASE; HOT MELT EXTRUSION; IN VITRO STUDY; MELTING POINT; PRIORITY JOURNAL; SUBCUTANEOUS ROD; THREE DIMENSIONAL PRINTING; YOUNG MODULUS; CHEMISTRY; DEVICES; DIFFERENTIAL SCANNING CALORIMETRY; DRUG DELIVERY SYSTEM; FLOW KINETICS; INTRAUTERINE CONTRACEPTIVE DEVICE; PROCEDURES; VISCOSITY; X RAY DIFFRACTION;

CALORIMETRY, DIFFERENTIAL SCANNING; DRUG CARRIERS; DRUG DELIVERY SYSTEMS; DRUG LIBERATION; INDOMETHACIN; INTRAUTERINE DEVICES; POLYVINYLS; PRINTING, THREE-DIMENSIONAL; RHEOLOGY; VISCOSITY; X-RAY DIFFRACTION;

EID: 84975055734     PISSN: 09280987     EISSN: 18790720     Source Type: Journal    
DOI: 10.1016/j.ejps.2015.11.005     Document Type: Article

References (29)

1. M. Agarwala, V. Jamalabad, N. Langrana, A. Safari, P. Whalen, and S. Danforth Structural quality of parts processed by fused deposition Rapid Prototyp. J. 2 1996 4 19
2. A. Almeida, S. Possemiers, M.N. Boone, T. De Beer, T. Quinten, L. Van Hoorebeke, J.P. Remon, and C. Vervaet Ethylene vinyl acetate as matrix for oral sustained release dosage forms produced via hot-melt extrusion Eur. J. Pharm. Biopharm. 77 2011 297 305
3. Anderson, and et al. Controlled release of active pharmaceutical ingredients from ethylene vinyl acetate copolymers http://www.vitaldose.com/resource/files/CELEM6691-CRS-White-Paper.pdf 2011 (accessed October 20, 2015)
4. M.M. Baum, I. Butkyavichene, J. Gilman, S. Kennedy, E. Kopin, A.M. Malone, C. Nguyen, T.J. Smith, D.R. Friend, M.R. Clark, and J.A. Moss An intravaginal ring for the simultaneous delivery of multiple drugs J. Pharm. Sci. 101 2012 2833 2843
5. J.L. Bourges, C. Bloquel, A. Thomas, F. Froussart, A. Bochot, F. Azan, R. Gurny, D. BenEzra, and F. Behar-Cohen Intraocular implants for extended drug delivery: therapeutic applications Adv. Drug Deliv. Rev. 58 2006 1182 1202
6. Celanese Applications of ethylene vinyl acetate copolymers (EVA) in drug delivery systems http://www.vitaldose.com/resource/files/EVA-DrugDelivery-Applications-Overview.pdf 2015 (accessed May 27, 2015)
7. Celanese http://www.celanese.com 2015 (accessed May 27, 2015)
8. J.W. Comb, W.R. Priedeman, and P.W. Turley FDM technology process improvements H.L. Marcus, J.J. Beaman, J.W. Barlow, D.L. Bourell, R.H. Crawford, Proceedings of the Solid Freeform Fabrication Symposium vol. 5 1994 The University of Texas at Austin Austin TX 42 49
9. S. Dash, P.N. Murthy, L. Nath, and P. Chowdhury Kinetic modeling on drug release from controlled drug delivery systems Acta Pol. Pharm. Drug Res. 67 2010 217 223
10. D. Espalin, K. Arcaute, D. Rodriguez, F. Medina, M. Posner, and R. Wicker Rapid Prototyp. J. 16 2010 164 173
11. A.V. Ewing, G.S. Clarke, and S.G. Kazarian Stability of indomethacin with relevance to the release from amorphous solid dispersions studied with ATR-FTIR spectroscopic imaging Eur. J. Pharm. Sci. 60 2014 64 71
12. S.L. Fialho, F. Behar-Cohen, and A. Silva-Cunha Dexamethasone-loaded poly(ϵ-caprolactone) intravitreal implants: a pilot study Eur. J. Pharm. Biopharm. 68 2008 637 646
13. C.G. Gogos, H. Liu, and P. Wang Laminar dispersive and distributive mixing with dissolution and applications to hot-melt extrusion D. Douroumis, Hot-Melt Extrusion: Pharmaceutical Applications 2012 A John Wiley & Sons, Ltd., Publications 261 284
14. A. Goyanes, A.B.M. Buanz, A.W. Basit, and S. Gaisford Fused-filament 3D printing (3DP) for fabrication of tablets Int. J. Pharm. 476 2014 88 92
15. Y.A. Han, M. Singh, and B.B. Saxena Development of vaginal rings for sustained release of nonhormonal contraceptives and anti-HIV agents Contraception 76 2007 132 138
16. K. Hausman 3D Printing for Dummies 2014 John Wiley & Sons, Inc.
17. A.S. Hoffman The origins and evolution of "controlled" drug delivery systems J. Control. Release 132 2008 153 163
18. D.W. Hutmacher, J.T. Schantz, C.X.F. Lam, K.C. Tan, and T.C. Lim State of the art and future directions of scaffold-based bone engineering from a biomaterials perspective J. Tissue Eng. Regen. Med. 1 2007 245 260
19. N. Kaneniwa, M. Otsuka, and T. Hayashi Physicochemical characterization of indomethacin polymorphs and the transformation kinetics in ethanol Chem. Pharm. Bull. 33 1985 3447 3455
20. J.A.H. van Laarhoven, M.A.B. Kruft, and H. Vromans Effect of supersaturation on the release properties of a controlled release device based on EVA copolymer J. Control. Release 82 2002 309 317
21. R.K. Malcolm, K.-L. Edwards, P. Kiser, J. Romano, and T.J. Smith Advances in microbicide vaginal rings Antivir. Res. 88S 2010 S30 S39
22. A. Martínez-García, A. Sánchez-Reche, S. Gisbert-Soler, C.M. Cepeda-Jiménez, R. Torregrosa-Maciá, and J.M. Martín-Martínez Corona discharge treatment of EVAs with different vinyl acetate contents J. Adhes. Sci. Technol. 21 2007 441 463
23. Perstorp https://www.perstorp.com 2015 (accessed May 27, 2015)
24. H.S. Ramanath, C.K. Chua, K.F. Leong, and K.D. Shah Melt flow behavior of poly-ϵ-caprolactone in fused deposition modeling J. Mater. Sci. Mater. Med. 19 2008 2541 2550
25. N. Sandler, I. Salmela, A. Fallarero, A. Rosling, M. Khajeheian, R. Kolakovic, N. Genina, J. Nyman, and P. Vuorela Towards fabrication of 3D printed medical devices to prevent biofilm formation Int. J. Pharm. 459 2014 62 64
26. M. Savolainen, A. Heinz, C. Strachan, K.C. Gordon, J. Yliruusi, T. Rades, and N. Sandler Screening for differences in the amorphous state of indomethacin using multivariate analysis Eur. J. Pharm. Sci. 30 2007 113 123
27. Stratasys FDM technology http://www.stratasys.com/3d-printers/technologies/fdm-technology 2015 (accessed May 27, 2015)
28. B.N. Turner, R. Strong, and S.A. Gold A review of melt extrusion additive manufacturing processes: I. Process design and modeling Rapid Prototyp. J. 20 2014 192 204
29. N. Zheng, M. Zhou, C. Du, S. Wang, and W. Lu 5-Fluorouracil delivery from a novel three-dimensional micro-device: in vitro and in vivo evaluation Arch. Pharm. Res. 36 2013 1487 1493