Structural quality of parts processed by fused deposition

Rapid Prototyping Journal

Volumn 2, Issue 4, 1996, Pages 4-19

  Agarwala, Mukesh K ^a   Jamalabad, Vikram R ^c   Langrana, Noshir A ^d   Safari, Ahmad ^b   Whalen, Philip J ^c   Danforth, Stephen C ^b  

^a UNIVERSITY OF DAYTON   (United States)

^b Center for Ceramic Reseach

^c HONEYWELL   (United States)

^d RUTGERS UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FUSED DEPOSITION MODELING (FDM); FUSED DEPOSITION OF CERAMICS (FDC); GEL CASTING; METAL PROCESSING;

CASTING; CERAMIC MATERIALS; COSTS; DENSIFICATION; DEPOSITION; METALS; POLYMERS; RAPID PROTOTYPING; SHRINKAGE; SINTERING; SOLID STATE DEVICES; WAXES; DEFECTS; FABRICATION; INORGANIC POLYMERS; PROCESS ENGINEERING; STRUCTURAL METALS;

LAYERED MANUFACTURING; STRUCTURAL CERAMICS;

FUSED DEPOSITION MODELLING (FDM); FUSED DEPOSITION OF CERAMICS (FDC); FUSED DEPOSITION OF METALS (FDMET); SOLID FREEFORM FABRICATION (SFF) SYSTEMS;

EID: 0030408272     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552549610732034     Document Type: Article

References (39)

1. Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 1990, 1991, 1992, 1993, 1994, 1995, 1996 (forthcoming). The University of Texas at Austin, Austin, TX.
2. Proceedings of the International Conference on Rapid Prototyping, Vol. 1991, 1992, 1993, 1994, The University of Dayton, Dayton, OH.
3. Ashley, S., "Rapid prototyping is coming of age", Mechanical Engineering, July 1995, pp. 62-8.
4. Pang, T.H. and Jacobs, P.F., "Stereolithography 1993: Quickcast™", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 4, 1993, The University of Texas at Austin, Austin, TX, pp. 158-67.
5. Pintat, T., Sindel, M., Greul, M. and Burblies, A., "Integration of numerical modeling and laser sintering with investment casting", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 5, 1994, The University of Texas at Austin, Austin, TX, pp. 175-80.
6. Walters, W., "Rapid prototyping using FDM™: a fast, precise, safe technology", Vol. 3, 1992, pp. 301-8.
7. Jamalabad, V.R., Whalen, P.J., Pollinger, J., Agarwala, M.K. and Danforth, S.C., "Gel cast molding with fugitive molds", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 7, 1996 (forthcoming).
8. Agarwala, M.K., Bourell, D.L., Beaman, J.J., Marcus, H.L. and Barlow, J.W., "Direct selective laser sintering of metals", Rapid Prototyping Journal, Vol. 1 No. 1, 1995, pp. 26-36.
9. Greulich, M., Greul, M. and Pintat, T., "Fast, functional prototypes via multiphase jet solidification", Rapid Prototyping Journal, Vol. 1 No. 1, 1995, pp. 20-25.
10. Merz, R., Prinz, F.B., Ramaswami, K., Terk, M. and Weiss, L.E., "Shape deposition manufacturing", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 5, 1994, The University of Texas at Austin, Austin, TX, pp. 1-8.
11. Bourell, D.L., Marcus, H.L., Barlow, J.W. and Beaman, J.J., "Selective laser sintering of metals and ceramics", The International Journal of Powder Metallurgy, Vol. 28 No. 4, 1992, pp. 369-81.
12. Bampton, C.C. and Burkett, R., "Freeform fabrication of high strength metal components and dies", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 6, 1995, The University of Texas at Austin, Austin, TX, pp. 342-5.
13. Griffin, C., Daufenbach, J. and McMillin, S., "Desktop manufacturing: LOM vs pressing", American Ceramics Society Bulletin, Vol. 73 No. 8, 1994.
14. Yoo, J., Cima, M.J., Khanuja, S. and Sachs, E.M., "Structural ceramic components by 3D printing", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 4, 1993, The University of Texas at Austin, Austin, TX, pp. 40-50.
15. Cawley, J.D., Heuer, A.M., Newman, W.S. and Mathewson, B.B., "Computer-aided manufacturing of laminated engineering materials", American Ceramic Society Bulletin, Vol. 75 No. 5, 1996, pp. 75-9.
16. Griffith, M.L., Chu, T.M., Wagner, W.C. and Halloran, J.W. (Eds), "Ceramic stereolithography for investment casting and biomedical applications", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H., Proceedings of the Solid Freeform Fabrication Symposium, The University of Texas at Austin, Austin, TX, Vol. 6, 1995, pp. 31-8.
17. Agarwala, M.K. et al., "Structural ceramics by fused deposition of ceramics", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 6, 1995, The University of Texas at Austin, Austin, TX, pp. 1-8.
18. Agarwala, M.K. et al., "Fused deposition of ceramics (FDC) for structural silicon nitride components", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 7, 1996 (forthcoming).
19. Agarwala, M.K. et al., "Fused deposition of ceramics (FDC) and metals (FDMet): an overview", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 7, 1996 (forthcoming).
20. Michaels, S., Sachs, E.M. and Cima, M.J., "Metal parts generation by 3-D printing", Vol. 3, 1992, pp. 244-50.
21. Griffin, E.A. and McMillin, S., "Selective laser sintering and fused deposition modeling processes for functional ceramic parts", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 6, 1995, The University of Texas at Austin, Austin, TX, pp. 25-30.
22. Badrinarayan, B. and Barlow, J.W., "Metal parts from selective laser sintering of metalpolymer powders", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 3, 1992, The University of Texas at Austin, Austin, TX, pp. 141-6.
23. Vail, N.K. and Barlow, J.W., "Ceramic structures by SLS of micro-encapsulated, finely divided ceramic materials", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 3, 1992, The University of Texas at Austin, Austin, TX, pp. 124-30.
24. Subramanian, P.K., Vail, N.K., Barlow, J.W. and Marcus, H.L., "Anisotropy in properties of alumina processed by SLS", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 5, 1994, The University of Texas at Austin, Austin, TX, pp. 330-38.
25. Agarwala, M.K., Bourell, D.L., Beaman, J.J., Marcus, H.L. and Barlow, J.W., "Post-processing of selective laser sintered metal parts", Rapid Prototyping Journal, Vol. 1 No. 2, 1995, pp. 36-44.
26. Nelson, J.C., Vail, N.K., Sun, M.M. and Barlow, J.W., "Post-processing of SLS polycarbonate parts", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 2, 1991, The University of Texas at Austin, Austin, TX, pp. 78-85.
27. van Weeren, R., Agarwala, M.K., Jamalabad, V.R. et al., "Quality of parts processed by fused deposition", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 6, 1995, The University of Texas at Austin, Austin, TX, pp. 314-21.
28. Thompson, D.C. and Crawford, R.H., "Optimizing part quality with orientation", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 6, 1995, The University of Texas at Austin, Austin, TX, pp. 362-8.
29. Fussell, P.S., Kircher, H.O.K., Prinz, F.B. and Weiss, L.E., "Controlling the microstructure of arc sprayed shells", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 2, 1991, The University of Texas at Austin, Austin, TX, pp. 213-35.
30. Jamalabad, V.R., Agarwala, M.K., Langrana, N.A. and Danforth, S.C., "Process improvements in fused deposition of ceramics (FDC): progress towards structurally sound components", Proceedings of the 1996 ASME Design Engineering Technology Conference and Computers in Engineering Conference, 18-22 August 1996, Irvine, CA.
31. Cima, M.J., Lauder, A., Khanuja, S. and Sachs, E.M., "Microstructural element of components derived from 3D printing", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 3, 1992, The University of Texas at Austin, Austin, TX, pp. 220-27.
32. Cima, M.J. and Sachs, E.M., "Three dimensional printing: form, materials, and performance", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 2, 1991, The University of Texas at Austin, Austin, TX, pp. 187-94.
33. Comb, J.W. and Priedeman, W.R., "Control parameters and material selection criteria for rapid prototyping systems", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 4, 1993, The University of Texas at Austin, Austin, TX, pp. 86-91.
34. Comb, J.W., Priedeman, W.R. and Turley, P.W., "FDM technology process improvements", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 5, 1994, pp. 42-9.
35. QuickSlice©, Stratasys Inc., Eden Prairie, MN.
36. Crawford, R.H., "Computer aspects of solid freeform fabrication: geometry, process control, and design", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 4, 1993, The University of Texas at Austin, Austin, TX, pp. 102-12.
37. Yardimci, M.A., Guceri, S., Agarwala, M.K. and Danforth, S.C., "Part quality prediction tools for fused deposition processing", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 7, 1996 (forthcoming).
38. German, R.M., Powder Injection Molding, 2nd ed., Metal Powder Industries Federation, Princeton, NJ, 1995.
39. Agarwala, M.K. et al., "Filament feed material for fused deposition processing of ceramics and metals", in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Vol. 7, 1996 (forthcoming).