Fused deposition modeling of patientspecific polymethylmethacrylate implants

Rapid Prototyping Journal

Volumn 16, Issue 3, 2010, Pages 164-173

  Bourell, Dave ^a   Espalin, David ^a   Arcaute, Karina ^a   Rodriguez, David ^a   Medina, Francisco ^a   Posner, Matthew ^a   Wicker, Ryan ^a  

^a WILLIAM BEAUMONT ARMY MEDICAL CENTER   (United States)

Author keywords

Bones; Orthopaedics; Porosity; Thermoplasticity

Indexed keywords

3D STRUCTURE; AIR-GAPS; AXIAL ORIENTATIONS; BUILDING PARAMETERS; COMPRESSIVE LOADS; COMPRESSIVE TESTING; CRANIOFACIAL; CRANIOFACIAL RECONSTRUCTION; DEFECT REPAIR; DESIGN/METHODOLOGY/APPROACH; FABRICATED STRUCTURES; FREEFORMS; FUSED DEPOSITION MODELING; LAYER ORIENTATIONS; MEDICAL IMPLANTS; MODULUS OF ELASTICITY; OPTICAL MICROGRAPHS; THERMOPLASTICITY; TRANSVERSE ORIENTATION; YIELD STRENGTH;

BONE; FABRICATION; FILAMENTS (LAMP); FREQUENCY DIVISION MULTIPLEXING; MECHANICAL PROPERTIES; MEDICAL IMAGING; ORTHOPEDICS; PHOTOMASKS; POLYESTERS; POROSITY; THREE DIMENSIONAL; YIELD STRESS;

COMPRESSIVE STRENGTH;

EID: 77951776891     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552541011034825     Document Type: Article

References (17)

1. Blecha, L.D., Rakotomanana, L., Razafinmahery, F., Terrier, A. and Pioletti, D.P. (2009), “Targeted mechanical properties for optimal fluid motion inside artificial bone substitutes”, Journal of Orthopedic Research, Vol. 27, pp. 1082-7.
2. Eppley, B.L. (2005), “Biomechanical testing of alloplastic PMMA cranioplasty materials”, Journal of Craniofacial Surgery, Vol. 16 No. 1, pp. 140-3.
3. Eufinger, H., Wehmoller, M., Harders, A. and Heuser, L. (1995), “Prefabricated prostheses for the reconstruction of skull defects”, International Journal of Oral and Maxillofacial Surgery, Vol. 24, pp. 104-110.
4. Frutos Cabanillas, P., Diez Peña, E., Barrales-Rienda, J.M. and Frutos, G. (2000), “Validation and in-vitro characterization of antibiotic-loaded bone cement release”, International Journal of Pharmaceutics, Vol. 209, pp. 15-26.
5. Gopakumar, S. (2004), “RP in medicine: a case study in cranial reconstructive surgery”, Rapid Prototyping Journal, Vol. 10 No. 3, pp. 207-211.
6. Gronet, P.M., Waskewicz, G.A. and Richardson, C. (2003), “Preformed acrylic cranial implants using fused deposition modeling: a clinical report”, Journal of Prosthetic Dentistry, Vol. 90, pp. 429-433.
7. Heinl, P., Muller, L., Korner, C., Singer, R.F. and Muller, F.A. (2008), “Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting”, Acta Biomaterialia, Vol. 4, pp. 1536-44.
8. Kujala, S., Ryhanen, J., Danilov, A. and Tuukkanen, J. (2003), “Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel-titanium bone graft substitute”, Biomaterials, Vol. 24, pp. 4691-97.
9. Lee, S.C., Wu, C.T., Lee, S.T. and Chen, P.J. (2009), “Cranioplasty using polymethyl methacrylate prostheses”, Journal of Clinical Neuroscience, Vol. 16, pp. 56-63.
10. Lewis, G. (1997), “Properties of acrylic bone cement: state of the art review”, Journal of Biomedical Materials Research, Vol. 38 No. 2, pp. 155-182.
11. Materialise (2009), Medical Solutions: Cranioplasty Medical Models, available at: www.materialise.com/materialise/view/en/421133-Cranioplasty.html.
12. Osswald, T., Baur, E., Brinkmann, S., Oberbach, K. and Schmachtenberg, E. (2006), International Plastics Handbook: the Resource for Plastics Engineers, Hanser Gardner, Cincinnati, OH.
13. Pelletier, M.H., Malisano, L., Smitham, P.J., Okamoto, K. and Walsh, W.R. (2009), “The compressive properties of bone cements containing large doses of antibiotics”, The Journal of Arthoplasty, Vol. 24 No. 3, pp. 454-461.
14. Ruhé, Q.P., Wolke, J.G.C., Spauwen, P.H.M. and Jansen, J.A. (2006), “Calcium phosphate ceramics for bone tissue engineering”, in Ed. Bronzino, J. (Ed.), Tissue Engineering and Artificial Organs, The Biomedical Engineering Handbook, 3rd ed., CRC Taylor & Francis, Boca Raton, FL, pp. 38-1-38-18.
15. Wang, T.M., Xi, J.T. and Jin, Y. (2007), “A model research for prototype warp deformation in the FDM process”, International Journal of Advanced Manufacturing Technology, Vol. 33 Nos 11 / 12, pp. 1087-96.
16. Zein, I., Hutmacher, D.W., Tan, K.C. and Teoh, S.H. (2002), “Fused deposition modeling of novel scaffold architectures for tissue engineering applications”, Biomaterials, Vol. 23 No. 4, pp. 1169-85.
17. Cai, S. and Juntong, X. (2008), “A control approach for pore size distribution in the bone scaffold based on the hexahedral mesh refinement”, Computer-Aided Design, Vol. 40 Nos 10 / 11, pp. 1040-50.