Mechanochemical aspects in wet stirred media milling

International Journal of Mineral Processing

Volumn 156, Issue , 2016, Pages 24-31

  Romeis, Stefan ^a   Schmidt, Jochen ^a   Peukert, Wolfgang ^a  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Amorphization; Glass; Liquid phase analysis; Mechanochemistry; Quartz; Reactivity; Solubility; Stirred media mills; Titania; Wet comminution

Indexed keywords

AMORPHIZATION; COMMINUTION; GLASS; LIQUIDS; MILLING (MACHINING); PARTICLE SIZE; QUARTZ; REACTIVITY (NUCLEAR); SOLUBILITY; TITANIUM DIOXIDE;

CHEMICAL COMPOSITIONS; INNOVATIVE PRODUCT DESIGN; LIQUID PHASE ANALYSIS; MECHANO-CHEMISTRY; PRODUCT CHARACTERIZATIONS; STIRRED MEDIA MILL; SUB-MICRON PARTICLES; TITANIA;

PRODUCT DESIGN;

EID: 84971595410     PISSN: 03017516     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.minpro.2016.05.018     Document Type: Article

References (75)

1. Alex, T., Kumar, R., Roy, S., Mehrotra, S., Mechanically induced reactivity of gibbsite: part 1. Planetary milling. Powder Technol. 264 (2014), 105–113.
2. Alex, T., Kumar, R., Roy, S., Mehrotra, S., Mechanically induced reactivity of gibbsite: part 2. Attrition milling. Powder Technol. 264 (2014), 229–235.
3. Alex, T.C., Kumar, R., Roy, S.K., Mehrotra, S.P., Mechanical activation of Al-oxyhydroxide minerals–a review. Miner. Process. Extr. Metall. Rev. 37 (2015), 1–26.
4. Armstrong, P., Knieke, C., Mačković, M., Frank, G., Hartmaier, A., Goeken, M., Peukert, W., Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process. Acta Mater. 57 (2009), 3060–3071.
5. Asay, D.B., Dugger, M.T., Kim, S.H., In-situ Vapor-Phase lubrication of MEMS. Tribol. Lett. 29 (2008), 67–74.
6. Asay, D.B., Dugger, M.T., Ohlhausen, J.A., Kim, S.H., Macro- to nanoscale wear prevention via molecular adsorption. Langmuir 24 (2008), 155–159.
7. Avvakumov, E., Senna, M., Kosova, N., Soft Mechanochemical Synthesis, A Basics for New Chemical Technologies. 2002, Kluwer Academic Publishers, Boston, MA.
8. Baláž, P., Mechanical activation in hydrometallurgy. Int. J. Miner. Process. 72 (2003), 341–354.
9. Bálaz, P., Aufl, (eds.) Mechanochemistry in Nanoscience and Minerals Engineering, 1, Vol. s.1, 2008, Springer-Verlag.
10. Baláž, P., Achimovičová, M., Baláž, M., Billik, P., Cherkezova-Zheleva, Z., Criado, J.M., Delogu, F., Dutková, E., Gaffet, E., et al. Hallmarks of mechanochemistry: from nanoparticles to technology. Chem. Soc. Rev., 42, 2013, 7571.
11. Baldauf, H., Schoenherr, J., Schubert, H., Alkane dicarboxylic acids and aminonaphthol-sulfonic acids — a new reagent regime for cassiterite flotation. Int. J. Miner. Process. 15 (1985), 117–133.
12. Barnette, A.L., Asay, D.B., Ohlhausen, J.A., Dugger, M.T., Kim, S.H., Tribochemical polymerization of adsorbed n-pentanol on SiO2 during rubbing: when does it occur and is it responsible for effective vapor phase lubrication?. Langmuir 26 (2010), 16299–16304.
13. Beyer, M.K., Clausen-Schaumann, H., Mechanochemistry: the mechanical activation of covalent bonds. Chem. Rev. 105 (2005), 2921–2948.
14. Boldyrev, V.V., Hydrothermal reactions under mechanochemical action. Powder Technol. 122 (2002), 247–254.
15. Boldyrev, V.V., Mechanochemistry and mechanical activation of solids. Russ. Chem. Rev. 75 (2006), 177–189.
16. Bridgman, P.W., Šimon, I., Effects of very high pressures on glass. J. Appl. Phys., 24, 1953, 405.
17. Brunauer, S., Emmett, P.H., Teller, E., Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60 (1938), 309–319.
18. Burmeister, C.F., Kwade, A., Process engineering with planetary ball mills. Chem. Soc. Rev. 42 (2013), 7660–7667.
19. Damm, C., Peukert, W., Kinetics of radical formation during the mechanical activation of quartz. Langmuir 25 (2009), 2264–2270.
20. Damm, C., Peukert, W., Mechano-chemical radical formation and polymerization initiation during wet grinding of alumina. J. Colloid Interface Sci. 363 (2011), 386–392.
21. Damm, C., Armstrong, P., Roßkopf, C., Romeis, S., Peukert, W., Mechanically induced phase transformation of zinc sulfide. Particuology 18 (2015), 1–10.
22. Damm, C., Mallembakam, M.R., Peukert, W., Effect of grinding conditions on mechanochemical grafting of poly(1-vinyl-2-pyrrolidone) onto quartz particles. Adv. Powder Technol. 21 (2010), 50–56.
23. D'Aprano, A., Donato, I.D., Caponetti, E., Agrigento, V., Viscosity studies of solutions of water in n-aliphatic alcohols at various temperatures. J. Solut. Chem. 8 (1979), 793–800.
24. Deschamps, T., Kassir-Bodon, A., Sonneville, C., Margueritat, J., Martinet, C., de Ligny, D., Mermet, A., Champagnon, B., Permanent densification of compressed silica glass: a Raman-density calibration curve. J. Phys. Condens. Matter., 25, 2013, 025402.
25. Dörfler, A., Detsch, R., Romeis, S., Schmidt, J., Eisermann, C., Peukert, W., Boccaccini, A.R., Biocompatibility of submicron Bioglass® powders obtained by a top-down approach. J. Biomed. Mater. Res. 102 (2014), 952–961.
26. Haynes, W.M., CRC Handbook of Chemistry and Physics, A Ready-reference Book of Chemical and Physical Data. Vol. 93, 2012, CRC Press, Boca Raton, Fla (ed., ed. 2012/2013 ed.).
27. Hemley, R.J., Jephcoat, A.P., Mao, H.K., Ming, L.C., Manghnani, M.H., Pressure-induced amorphization of crystalline silica. Nature 334 (1988), 52–54.
28. James, S.L., Adams, C.J., Bolm, C., Braga, D., Collier, P., Friščić, T., Grepioni, F., Harris, K.D.M., Hyett, G., et al. Mechanochemistry: opportunities for new and cleaner synthesis. Chem. Soc. Rev., 41, 2011, 413.
29. Jones, J.R., Review of bioactive glass: from hench to hybrids. Acta Biomater. 9 (2013), 4457–4486.
30. Juhász, A.Z., Opoczky, L., Mechanical Activation of Minerals by Grinding, Pulverizing and Morphology of Particles. 1990, Ellis Horwood, Chichester.
31. Kaupp, G., Mechanochemistry: the varied applications of mechanical bond-breaking. CrystEngComm, 11, 2009, 388.
32. Kestin, J., Sokolov, M., Wakeham, W.A., Viscosity of liquid water in the range − 8 °C to 150 °C. J. Phys. Chem. Ref. Data, 7, 1978, 941.
33. Khodakov, G.S., Influence of fine grinding on the physicochemical properties of solids. Russ. Chem. Rev. 32 (1963), 386–398.
34. Knieke, C., Romeis, S., Peukert, W., Influence of process parameters on breakage kinetics and grinding limit at the nanoscale. AICHE J. 57 (2011), 1751–1758.
35. Knieke, C., Sommer, M., Peukert, W., Identifying the apparent and true grinding limit. Powder Technol. 195 (2009), 25–30.
36. Knieke, C., Steinborn, C., Romeis, S., Peukert, W., Breitung-Faes, S., Kwade, A., Nanoparticle production with stirred-media mills: opportunities and limits. Chem. Eng. Technol. 33 (2010), 1401–1411.
37. Konnerth, C., Damm, C., Schmidt, J., Peukert, W., Mechanical activation of trans-stilbene during wet grinding. Adv. Powder. Technol. 25:6 (2014), 1808–1816.
38. Kumar, R., Kumar, S., Badjena, S., Mehrotra, S.P., Hydration of mechanically activated granulated blast furnace slag. Metall. Mater. Trans. B Process Metall. Mater. Process. Sci. 36 (2005), 873–883.
39. Lecloux, A., Pirard, J., The importance of standard isotherms in the analysis of adsorption isotherms for determining the porous texture of solids. J. Colloid Interface Sci. 70 (1979), 265–281.
40. Lippens, B.C., de Boer, J.H., Studies on pore systems in Catalysts V. The t method. J. Catal. 4 (1965), 319–323.
41. Lowell, S., Shields, J.E., Thomas, M.A., Thommes, M., Characterization of Porous Solids and Powders: SURFACE Area, Pore Size and Density. 2004, Springer, Dordrecht.
42. 2 glasses: a structural approach. J. Phys. Condens. Matter., 27, 2015, 325401.
43. Mende, G., Bernotat, S., Schwedes, J., Verdrängungsströmung und Partikelverdrängung zwischen Mahlkugeln bzw. Mahlkugel und Wand. Chem. Ing. Tech. 76 (2004), 77–80.
44. Mende, S., Stenger, F., Peukert, W., Schwedes, J., Mechanical production and stabilization of submicron particles in stirred media mills. Powder Technol. 132 (2003), 64–73.
45. Molchanov, V.V., Buyanov, R.A., Mechanochemistry of catalysts. Russ. Chem. Rev. 69 (2000), 435–450.
46. Morozov, V.V., Baldauf, H., Schubert, H., On the role of the ion composition of the aqueous phase in the flotation of fluorite and calcite. Int. J. Miner. Process. 35 (1992), 177–189.
47. Niu, Y.-F., Han, K., Guin, J.-P., Locally enhanced dissolution rate as a probe for nanocontact-induced densification in oxide glasses. Langmuir 28 (2012), 10733–10740.
48. Paul, J., Romeis, S., Mačković, M., Marthala, V., Herre, P., Przybilla, T., Hartmann, M., Spiecker, E., Schmidt, J., Peukert, W., In situ cracking of silica beads in the SEM and TEM - effect of particle size on structure-property correlations. Powder Technol. 270 (2015), 337–347.
49. Roelofs, F., Vogelsberger, W., Dissolution of commercial microscale quartz particles in water at biological-like conditions and its theoretical description. J. Phys. Chem. C 117 (2013), 13914–13927.
50. Romeis, S., Hoppe, A., Eisermann, C., Schneider, N., Boccaccini, A.R., Schmidt, J., Peukert, W., Enhancing in vitro bioactivity of melt-derived 45S5 Bioglass® by comminution in a stirred media mill. J. Am. Ceram. Soc. 97 (2014), 150–156.
51. Romeis, S., Paul, J., Hanisch, M., Marthala, V.R.R., Hartmann, M., Klupp Taylor, R.N., Schmidt, J., Peukert, W., Correlation of enhanced strength and internal structure for heat-treated submicron Stöber silica particles. Part. Part. Syst. Charact. 31 (2014), 664–674.
52. Romeis, S., Paul, J., Herre, P., de Ligny, D., Schmidt, J., Peukert, W., Local densification of a single micron sized silica sphere by uniaxial compression. Scr. Mater., 84–87, 2015.
53. Romeis, S., Paul, J., Ziener, M., Peukert, W., A novel apparatus for in situ compression of submicron structures and particles in a high resolution SEM. Rev. Sci. Instrum., 83, 2012, 095105.
54. Rouxel, T., Ji, H., Hammouda, T., Moréac, A., Poisson's ratio and the densification of glass under high pressure. Phys. Rev. Lett., 100, 2008.
55. 2EDTA Reagent. Environ. Sci. Technol. 42 (2008), 4159–4164.
56. Schmidt, J., Vogelsberger, W., Dissolution kinetics of titanium dioxide nanoparticles: the observation of an unusual kinetic size effect. J. Phys. Chem. B 110 (2006), 3955–3963.
57. Schmidt, J., Plata, M., Tröger, S., Peukert, W., Production of polymer particles below 5 μm by wet grinding. Powder Technol. 228 (2012), 84–90.
58. Seidel, A., Löbbus, M., Vogelsberger, W., Sonnefeld, J., The kinetics of dissolution of silica ‘Monospher’ into water at different concentrations of background electrolyte. Solid State Ionics 101-103 (1997), 713–719.
59. Senna, M., Foundation and application of solid-state processes at inorganic–organic particulate boundaries. Adv. Powder Technol. 25 (2014), 114–121.
60. Senna, M., Düvel, A., Šepelák, V., Shi, J., Silva, D., Lucenildo, K., Laporte, V., Lebedkin, S., Kübel, C., Wang, D., Schünemann, D., Becker, K.-D., Heitjans, P., Transfer and state changes of fluorine at polytetrafluoroethylene/titania boundaries by mechanical stressing and thermal annealing. J. Phys. Chem. C 117 (2013), 15272–15278.
61. Šepelák, V., Düvel, A., Wilkening, M., Becker, K.-D., Heitjans, P., Mechanochemical reactions and syntheses of oxides. Chem. Soc. Rev. 42 (2013), 7507–7520.
62. Sharma, S.M., Sikka, S., Pressure induced amorphization of materials. Prog. Mater. Sci. 40 (1996), 1–77.
63. Steinike, U., Hennig, H.-P., Mechanically induced reactivity of solids. KONA 10 (1992), 15–24.
64. Stenger, F., Götzinger, M., Jakob, P., Peukert, W., Mechano-chemical changes of nano sized α-Al2O3 during wet dispersion in stirred ball mills. Part. Part. Syst. Charact. 21 (2004), 31–38.
65. Stewart, D.R., Rindone, G.E., Dachille, F., Heats of solution, density, and refractive index changes in sodium borate glasses subjected to high pressure. J. Am. Ceram. Soc. 50 (1967), 467–472.
66. Stöber, W., Fink, A., Bohn, E., Controlled growth of monodisperse silica spheres in the micron size range. J. Colloid Interface Sci. 26 (1968), 62–69.
67. Suryanarayana, C., Mechanical alloying and milling. Prog. Mater. Sci. 46 (2001), 1–184.
68. Sydorchuk, V., Khalameida, S., Zazhigalov, V., Skubiszewska-Zięba, J., Leboda, R., Wieczorek-Ciurowa, K., Influence of mechanochemical activation in various media on structure of porous and non-porous silicas. Appl. Surf. Sci. 257 (2010), 446–450.
69. Takacs, L., The historical development of mechanochemistry. Chem. Soc. Rev. 42 (2013), 7649–7659.
70. Teokcharov, L., Simeonov, D., Uzunov, I., Klissurski, D., Mechanochemical modification of silica. J. Mater. Sci. Lett. 11 (1992), 1180–1182.
71. Tester, J.W., Worley, W., Robinson, B.A., Grigsby, C.O., Feerer, J.L., Correlating quartz dissolution kinetics in pure water from 25 to 625 °C. Geochim. Cosmochim. Acta 58 (1994), 2407–2420.
72. Vogelsberger, W., Schmidt, J., Roelofs, F., Dissolution kinetics of oxidic nanoparticles: the observation of an unusual behaviour. Colloids Surf. A Physicochem. Eng. Asp. 324 (2008), 51–57.
73. Voronov, A., Kohut, A., Synytska, A., Peukert, W., Mechanochemical modification of silica with poly(1-vinyl-2-pyrrolidone) by grinding in a stirred media mill. J. Appl. Polym. Sci. 104 (2007), 3708–3714.
74. Wang, Y., Forssberg, E., Production of carbonate and silica nano-particles in stirred bead milling. Int. J. Miner. Process. 81 (2006), 1–14.
75. Yuan, W., Li, J., Zhang, Q., Saito, F., Innovated application of mechanical activation to separate lead from scrap cathode ray tube funnel glass. Environ. Sci. Technol. 46 (2012), 4109–4114.