Experimental and numerical studies on the effect of deep rolling on bending fretting fatigue resistance of Al7075

International Journal of Advanced Manufacturing Technology

Volumn 82, Issue 9-12, 2016, Pages 2137-2148

  Majzoobi, G H ^a   Zare Jouneghani, F ^a   Khademi, E ^b  

^a BU ALI SINA UNIVERSITY   (Iran)

^b HAMEDAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Al7075 T6; Deep rolling; Fretting fatigue life (FFL); Residual stress; Simulation

Indexed keywords

ABAQUS; BENDING TESTS; FATIGUE TESTING; FRACTURE MECHANICS; FRETTING CORROSION; HARDENING; KINEMATICS; NUMERICAL MODELS; RESIDUAL STRESSES;

AL7075-T6; BAUSCHINGER EFFECTS; DEEP ROLLING; EXPERIMENTAL AND NUMERICAL STUDIES; FRETTING FATIGUE LIVES; MATERIAL CHARACTERISTICS; NONLINEAR KINEMATIC HARDENING; SIMULATION;

FATIGUE OF MATERIALS;

EID: 84956583880     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-015-7542-z     Document Type: Article

References (30)

1. Hills DA (1994) Mechanics of fretting fatigue. Wear 175:107–113
2. Nowell D, Dini D, Hills D (2006) Recent developments in the understanding of fretting fatigue. Eng Fract Mech 73:207–222
3. Nakazawa K, Sumita M, Maruyama N (1994) Effect of relative slip amplitude on fretting fatigue of high strength steel. Fatigue Fract Eng Mater Struct 17:751–759
4. Pape J, Neu R (1999) Influence of contact configuration in fretting fatigue testing. Wear 225:1205–1214
5. Husheng G, Haicheng G, Huijiu Z (1991) The effect of hardness on the fretting fatigue of alloy steels. Fatigue Fract Eng Mater Struct 14:789–796
6. Waterhouse RB (1988) The effect of surface treatment on the fatigue & fretting fatigue of materials. Pergamon Press, Oxford
7. Majzoobi G, Jaleh M (2007) Duplex surface treatments on AL7075-T6 alloy against fretting fatigue behavior by application of titanium coating plus nitriding. Mater Sci Eng A 452:673–681
8. Majzoobi G, Nemati J, Novin Rooz A, Farrahi G (2009) Modification of fretting fatigue behavior of AL7075–T6 alloy by the application of titanium coating using IBED technique and shot peening. Tribol Int 42:121–129
9. Nalla R, Altenberger I, Noster U, Liu G, Scholtes B, Ritchie R (2003) On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti–6Al–4V at ambient and elevated temperatures. Mater Sci Eng A 355:216–230
10. Balland P, Tabourot L, Degre F, Moreau V (2013) Mechanics of the burnishing process. Precis Eng 37:129–134
11. Rao J, Reddy A, Rao (2011) The effect of roller burnishing on surface hardness and surface roughness on mild steel specimens. Int J Appl Eng Res 1:777–785
12. Schuh A et al (2007) Deep rolling of titanium rods for application in modular total hip arthroplasty. J Biomed Mater Res B Appl Biomater 81:330–335
13. Shepard MJ, Prevey, Jayaraman N (2004) Effects of surface treatment on fretting fatigue performance of Ti-6Al-4V, DTIC Document
14. Travieso-Rodríguez JA, González-Rojas HA, Gómez-Gras G, Dessein G, Alexis J (2013) Ball-burnishing process influence on hardness and residual stresses of aluminium A92017, TMT 2013 Proceedings
15. Gulhane U, MishraP S, Mishra K (2012) Enhancement of surface roughness of 316L stainless steel and Ti-6Al-4V using low plasticity burnishing: DOE approach. I J
16. Prabhu PR, Kulkarni S, Sharma S (2011) An experimental investigation on the effect of deep cold rolling parameters on surface roughness and hardness of AISI 4140 steel. World Acad Sci Eng Technol 60:1594–1598
17. Prabhu S, Kulkarni S, Sharma K, Jagannath, Bhat C (2012) Deep cold rolling process on AISI 4140 steel and optimization of surface roughness by response surface methodology
18. Majzoobi G, Motlagh ST, Amiri A (2010) Numerical simulation of residual stress induced by roll-peening. Trans Indian Inst Metals 63:499–504
19. Sayahi M, Sghaier S, Belhadjsalah H (2013) Finite element analysis of ball burnishing process: comparisons between numerical results and experiments. Int J Adv Manuf Technol 67:1665–1673
20. Yen Y, Sartkulvanich P, Altan T (2005) Finite element modeling of roller burnishing process. CIRP Ann Manuf Technol 54:237–240
21. Majzoobi G, Azadikhah K, Nemati J (2009) The effects of deep rolling and shot peening on fretting fatigue resistance of aluminum-7075-T6. Mater Sci Eng A 516:235–247
22. Avilés R, Albizuri J, Rodríguez A, López de Lacalle L (2013) Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel. Int J Fatigue 55:230–244
23. Liu KK, Hill MR (2009) The effects of laser peening and shot peening on fretting fatigue in Ti–6Al–4V coupons. Tribol Int 42:1250–1262
24. Altenberger I (2005) Deep rolling—the past, the present and the future, in Proceedings of 9th International Conference on Shot Peening 6–9
25. Juijerm P, Altenberger I (2006) Fatigue behavior of deep rolled Al–Mg–Si–Cu alloy at elevated temperature. Scr Mater 55:943–946
26. Altenberger I, Nalla RK, Sano Y, Wagner L, Ritchie RO (2012) On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti–6Al–4V at elevated temperatures up to 550 C. Int J Fatigue 44:292–302
27. Majzoobi G, Minaii K (2013) An investigation into the effect of contact geometry on the rotary bending fretting fatigue life of Al 7075-T6. P I Mech Eng J-J Eng 227:1285–1296
28. Systèmes D (2010) Abaqus 6.10 online documentation, Abaqus User Subroutines Reference Manual
29. Bonora N, Majzoobi G, Khademi E (2014) Numerical implementation of a new coupled cyclic plasticity and continuum damage model. Comput Mater Sci 81:538–547
30. Röttger K (2002) Walzen hartgedrehter oberflaechen: Shaker