On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 °c

International Journal of Fatigue

Volumn 44, Issue , 2012, Pages 292-302

  Altenberger, Igor ^a   Nalla, Ravi K ^b   Sano, Yuji ^c   Wagner, Lothar ^d   Ritchie, Robert O ^e  

^a Hochschule Berlin   (Germany)

^b LensVector Inc   (United States)

^c TOSHIBA CORPORATION   (Japan)

^d CLAUSTHAL UNIVERSITY OF TECHNOLOGY   (Germany)

^e UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Deep rolling; Fatigue; Laser shock peening; Surface treatments; Titanium alloys

Indexed keywords

COMPRESSIVE RESIDUAL STRESS; DEEP-ROLLING; ELEVATED TEMPERATURE; FAN BLADES; FATIGUE BEHAVIOR; FATIGUE STRENGTH; FULLY REVERSED; HIGH-CYCLE FATIGUES; LASER SHOCK PEENING; LOW CYCLE FATIGUES; MECHANICAL SURFACE TREATMENT; NEAR-SURFACE; PUSH-PULL LOADING; SURFACE CONDITIONS; TEST TEMPERATURES; TI-6AL-4V; TI-6AL-4V ALLOY; TITANIUM TI-6AL-4V; WORK-HARDENED LAYER;

ALUMINUM; FATIGUE OF MATERIALS; STRESS ANALYSIS; TITANIUM; TITANIUM ALLOYS; TURBOMACHINE BLADES;

SURFACE TREATMENT;

EID: 84864442433     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2012.03.008     Document Type: Article

References (54)

1. D. Helm Application of Ti-Alloys as compressor discs and blades R.R. Boyer, D. Eylon, G. Lütjering, Fatigue behavior of titanium alloys 1999 TMS Warrendale (USA) 291 298
2. Traiser H, Kloos KH. Einfluß einer Oberflächenkaltverfestigung auf die Schwingfestigkeit und das Wechselverformungsverhalten der normalisierten Kohlenstoffstähle Ck15 und Ck45 unter Zugdruck- und Umlaufbiegebeanspruchung. Z. Werkstofftech. 1985;16:135-43.
3. Schulze V, Lang KH, Vöhringer O, Macherauch E. Relaxation of shot peening induced re.sidual stresses in quenched and tempered steel AISI 4140 due to uniaxial cyclic deformation. In: Champaigne J, editor. Proc. 6th Int. Conf. on Shot Peening (ICSP6). San Francisco; 1996 p. 403-12.
4. Ebenau A, Vöhringer O, Macherauch E, Eifler D. Influence of shot peening on the cyclic deformation behaviour of the steel 42CrMo4 in a normalized state. In: Iida K, editor. Proc. 4th Int. Conf. on Shot Peening (ICSP4). Tokyo; 1990. p. 327-36.
5. Juijerm P, Altenberger I. Cyclic deformation behavior and its optimization at elevated temperature. In: Kvackaj T, editor. Aluminium alloys, theory and applications. InTech; 2011. p. 183-98.
6. P. Lukas, M. Klesnil, and J. Polak High cycle fatigue life of metals Mater Sci Eng 15 1974 239 245
7. H. Gray, L. Wagner, and G. Lütjering Influence of shot peening on the fatigue strength of Ti-alloys at elevated temperatures J.T. Barnby, Fatigue prevention and design 1986 Chamelion Press London (UK) 363 376
8. Altenberger I. Alternative mechanical surface treatments - microstructure, residual stresses and fatigue behaviour. In: Wagner L, editor. Shot Peening. Wiley-VCH: Garmisch-Partenkirchen; 2003. p. 421-34 [ICSP8].
9. Wagner L, Ludian T, Wollmann M. Ball-burnishing and roller-burnishing to improve fatigue performance of structural alloys. In: Pantelakis S, Rodopoulos C, editors. Engineering against fracture; Springer Science+Business Media B.V.; 2009. p.1-11.
10. Prevey PS, Jayaraman N, Cammett J. Overview of low plasticity burnishing for mitigation of fatigue damage mechanisms. In: Schulze V, Niku-Lari A, editors. Proc. 9th Intl. Conf. on Shot Peening (ICSP9). Paris: IITT International; 2005. p. 267-72.
11. Hill MR, Pistochini TE, DeWald AT. Optimization of residual stress and fatigue life in laser peened components. In: Schulze V, Niku-Lari A, editors. Proc 9th intl conf on shot peening (ICSP9). Paris: IITT International; 2005. p. 156-62.
12. C.S. Montross, T. Wei, L. Ye, G. Clark, and Y.W. Mai Laser shock processing and its effects on microstructure and properties of metal alloys: a review Int J Fatigue 24 2002 1021 1036
13. J.M. Yang, Y.C. Her, N. Han, and A. Clauer Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes Mater Sci Eng A 298 2001 296 299
14. P. Peyre, R. Fabbro, and P. Merrien Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour Mater Sci Eng A 210 1996 102 113
15. Gray H, Wagner L, Lütjering G. Influence of shot peening induced surface roughness, residual macrostresses and dislocation density on the elevated temperature HCF-properties of Ti-alloys. In: Wohlfahrt H, editor. DGM: Shot Peening; 1987. p. 447-58.
16. T. Ludian, and L. Wagner Mechanical surface treatments for improving fatigue behaviour in titanium alloys Adv Mater Sci 8 2008 44 52
17. Cherif MA, Knobbe H, Altenberger I, Krupp U. Near-surface characteristics and fatigue behavior of laser shock peened titanium alloy timetal LCB. In: Niinomi M, Akiyama S, Hagiwara M, Ikeda M, Maruyama K, editors. Ti-2007 Science and technology (Proc 11th World Titanium Conference). Kyoto; 2007. p. 1667-71.
18. R.K. Nalla, I. Altenberger, U. Noster, G.Y. Liu, B. Scholtes, and R.O. Ritchie On the influence of mechanical surface treatments -deep rolling and laser shock peening-on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures Mater Sci Eng A 355 2003 216 230
19. L. Wagner Mechanical surface treatments on titanium, aluminum and magnesium alloys Mater Sci Eng A 263 1999 210 216
20. L. Wagner, M. Mhaede, M. Wollmann, I. Altenberger, and Y. Sano Surface layer properties and fatigue behavior in Al 7075-T73 and Ti-6Al-4V: Comparing results after laser peening; shot peening and ball-burnishing Int J Struct Integrity 2 2011 185 199
21. I. Altenberger, U. Noster, B.L. Boyce, J.O. Peters, B.O. Scholtes, and R.O. Ritchie Effects of mechanical surface treatment on fatigue failure in Ti-6Al-4V: role of residual stresses and foreign-object damage Mater Sci Forum 404-407 2002 457 462
22. I. Altenberger, E.A. Stach, G. Liu, R.K. Nalla, and R.O. Ritchie An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening Scripta Mater 48 2003 593 598
23. J.O. Peters, and R.O. Ritchie Influence of foreign-object damage on crack initiation and early crack growth during high-cycle fatigue of Ti-6Al-4V Eng Fract Mech 67 2000 193 207
24. R.O. Ritchie, B.L. Boyce, J.P. Campbell, O. Roder, A.W. Thompson, and W.W. Milligan Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy Int J Fatigue 21 1999 653 662
25. B.L. Boyce, and R.O. Ritchie Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti-6Al-4V Eng Fract Mech 68 2001 129 147
26. R.K. Nalla, B.L. Boyce, J.P. Campbell, J.O. Peters, and R.O. Ritchie Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: bimodal vs. lamellar structures Metall Mater Trans A 33A 2002 899 918
27. Y. Sano, M. Obata, T. Kubo, N. Mukai, M. Yoda, and K. Masaki Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating Mater Sci Eng A 417 2006 334 340
28. 2 Ψ - Verfahren der röntgenographischen Spannungsmessung Z f angew Physik 13 1961 305 312
29. I. Altenberger, B. Scholtes, U. Martin, and H. Oettel Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304 Mater Sci Eng A 264 1999 1 16
30. C.H. Moelle, and H.J. Fecht Thermal stability of nanocrystalline iron prepared by mechanical attrition Nanostruct Mater 6 1995 421 424
31. Hanagarth H. Auswirkungen von Oberflächenbehandlungen auf das Ermüdungsverhalten von TiAl6V4 und 42CrMo4 bei erhöhter Temperatur. Dr.-Ing. Thesis, University Karlsruhe (TH); 1989.
32. Altenberger I, Sano Y, Nikitin I, Scholtes B. Fatigue behavior and residual stress state of laser shock peened materials at ambient and elevated temperatures. In: Fatigue 2006, Proc 9th Int Fatigue Congress. Elsevier Ltd., paper FT124; 2006.
33. Pollak RD. Analysis of methods for determining high cycle fatigue strength of a material with investigation of titanium-aluminum-vanadium gigacycle fatigue behaviour. Ph.D. thesis. Air University: Air Force Institute of Technology; 2005.
34. R.C. McClung A literature survey on the stability and significance of residual stresses during fatigue Fatigue Fract Eng Mater Struct 30 2007 173 205
35. P. Juijerm, and I. Altenberger Cyclic deformation behavior of deep rolled as-quenched aluminium alloy AA6110 at elevated temperatures Int J Mater Res 98 2007 506 510
36. Schulze V. Modern mechanical surface treatments. Wiley-VCH; 2005.
37. R. John, D.J. Buchanan, S.K. Jha, and J.M. Larsen Stability of shot-peen residual stresses in an α + β titanium alloy Scripta Mater 61 2009 343 346
38. P. Juijerm, and I. Altenberger Effective boundary of deep-rolling treatment and its correlation with residual stress stability of Al-Mg-Mn and Al-Mg-Si-Cu alloys Scripta Mater 56 2007 745 748
39. B. Schwilling, C. Fleck, and D. Eifler Cyclic deformation behaviour of TiAl6V4 and TiAl6Nb7 in different quasi-physiological media Mater wiss u Werkstofftech. 33 2002 453 458
40. Marmy P, Leguey T, Belianov I, Sauder M, Brütsch R. 2003 [unpublished work].
41. P. Marmy, T. Leguey, I. Belianov, and M. Victoria Tensile and fatigue properties of two titanium alloys as candidate materials for fusion reactors J Nucl Mater 283-287 2000 602 606
42. T. Leguey, R. Schäublin, P. Marmy, and M. Victoria Microstructure of Ti5Al2.5Sn and Ti6Al4V deformed in tensile and fatigue tests J Nucl Mater 305 2002 52 59
43. Berling JT, Slot T. Effect of temperature and strain rate on low-cycle fatigue resistance of AISI 304, 316 and 348 stainless steel. In: ASTM Spec Tech Pub; 1969, vol. 459. p. 3-30.
44. P. Lukas, and L. Kunz Effect of low temperatures on the cyclic stress-strain response and high cycle fatigue life of polycrystalline copper Mater Sci Eng A 103 1998 233 239
45. Noster U, Altenberger I, Scholtes B. Isothermal fatigue of magnesium wrought alloy AZ 31. In: Kainer KU, editor. Proc Magnesium Alloys and Their Applications. Weinheim: Verlag Wiley-VCH; 2000. p. 312-17.
46. U. Martin, I. Altenberger, B. Scholtes, K. Kremmer, and H. Oettel Cyclic deformation and near surface microstructures of normalized shot peened steel SAE 1045 Mater Sci Eng A 246 1998 69 80
47. H.A. Padilla II, and B.L. Boyce A review of fatigue behavior in nanocrystalline metals Exp Mech 50 2010 5 23
48. P. Juijerm, I. Altenberger, U. Noster, and B. Scholtes Residual stress relaxation and cyclic deformation behavior of deep rolled AlMg4.5Mn (AA5083) at elevated temperatures Mater Sci Forum 490 2005 436 441
49. P. Juijerm, and I. Altenberger Residual stress relaxation of deep-rolled Al-Mg-Si-Cu alloy during cyclic loading at elevated temperatures Scripta Mater 55 2006 1111 1114
50. G.K. Williamson, and R.E. Smallman Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye-Scherrer spectrum Phil Mag 1 1956 34 46
51. Altenberger I, Scholtes B, Noster U, Ritchie RO. Characterization of fatigue crack formation in mechanically surface treated austenitic stainless steel. In: Ravi-Chandar K, Karihaloo BL, Kishi T, Ritchie RO, Yokobori AT, Okobori T, editors. Advances in fracture research - Proc Intl Conf on Fracture 10, Honolulu. UK: Elsevier Science; 2001.
52. J.J. Ruschau, R. John, S.R. Thompson, and T. Nicholas Fatigue crack nucleation and growth rate behavior of laser shock peened titanium Int J Fatigue 21 1999 S199 S209
53. Röttger K, Wilcke G, Altenberger I. Festwalzen hochbeanspruchter Bauteile zur Steigerung der Festigkeit. In: DVM-Bericht 131 "Leichtbau und Betriebsfestigkeit. München; 2004. p. 293-302.
54. Peters JO, Lütjering G, Nalla RK, Altenberger I, Ritchie RO. High cycle fatigue of beta-titanium alloys. In: Blom AF, editor. Fatigue 2002, Proceedings of the Eighth International Fatigue Congress. West Midlands (UK): EMAS, Cradley Heath; 2002, vol. 3. p. 1763-72.