Bioinspired nanocomposites for orthopedic applications

Nanotechnology for the Regeneration of Hard and Soft Tissues

Volumn , Issue , 2007, Pages 1-52

  Liu, Huinan ^a   Webster, Thomas J ^b  

^a Brown University   (United States)

^b BROWN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

NANOTECHNOLOGY;

ORTHOPEDIC APPLICATIONS;

NANOSTRUCTURED MATERIALS;

EID: 84969677332     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1142/9789812779656_0001     Document Type: Chapter

References (114)

1. Smith R. (2004) Bone Health and Osteoporosis: A Report of the Surgeon General, U.S. Department of Health and Human Services, Public Health Service, Office of the Surgeon General, Rockville, MD, pp. 68-70, 2004.
2. Bren L (2004) Joint replacement: an inside look. FDA Consumer, 38(2). http://www.fda.gov/fdac/features/2004/204_joints.html
3. Webster TJ. (2003) Nanophase ceramics as improved bone tissue engineering materials. American Ceramic Society Bulletin 82(6): 23-28.
4. Rho JY, Kuhn-Spearing L, and Zioupos P. (1998) Mechanical properties and the hierarchical structure of bone. Medical Engineering & Physics 20: 92-102.
5. Kaplan FS, Hayes WC, Keaveny TM, Boskey A, Einhorn TA, and Iannotti J. (1994) Form and function of bone. In: Orthopaedic Basic Science, Simon SR, (ed.), American Academy of Orthopaedic Surgeons, Columbus, OH, pp. 127-185.
6. Webster TJ. (2001) Nanophase ceramics: The future orthopedic and dental implant material. In: Advances in Chemical Engineering, Vol. 27, Nanostructured Materials, Ying JY (ed.), Academic Press, San Diego, CA, pp. 126-160.
7. Kuhn-Spearing L, Rey C, Kim HM, and Glimcher MJ. (1996) Carbonated apatite nanocrystals of bone. In: Synthesis and processing of nanocrystalline powder, Bourell DL (ed.), The Minerals, Metals and Materials Society, Warrendale, PA, USA.
8. Giraud-Guille MM. (1998) Twisted plywood architecture of collagen fibrils in human compact bone osteons. Calcified tissue international 42(3): 167-180.
9. Bronzino JD. (2000) The Biomedical Engineering Handbook, CRC Press, Boca Raton, FL: pp. 274-706.
10. Black J, and Hastings G. (1998) Handbook of Biomaterial Properties, Chapman & Hall, New York, NY, pp. 5-21.
11. Fung YC. (1993) Biomechanics: Mechanical Properties of Living Tissues, Springer-Verlag, New York, NY, pp. 5-519.
12. Boccaccini AR, and Blaker JJ. (2005) Bioactive composite materials for tissue engineering scaffolds. Expert Review of Medical Devices 2(3): 303-317.
13. Guyton AC. (1991) Textbook of Medical Physiology, Saunders, Philadelphia, PA, pp. 5-881.
14. Marin BR, and Burr DB (1989) Structure Function and Adaptation of Compact Bone, Raven Press, New York, NY, pp. 106-107.
15. Trippel SB. (1998) Potential role of insulin like growth factors in fracture healing. Clinical Orthopaedics and Related Research 355S: S301-313.
16. Stein GS, Lian JB. (1993) Molecular mechanisms mediating proliferation/differentiation interrelationships during progressive development of osteoblast phenotype. Endocrine Reviews 14(4): 424-442.
17. Wei G. and Ma PX.. (2004) Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering. Biomaterials 25(19): 4749-4757.
18. Salgado AJ, Coutinho OP, and Reis RL. (2004) Bone tissue engineering: state of the art and future trends. Macromolecular Bioscience 4(8): 743-765.
19. Saltzman, WM. (2004) Tissue Engineering, Oxford University Press, New York, NY, pp. 5-7.
20. Marra KG, Szem JW, Kumta PN, DiMilla PA, and Weiss LE. (1999) In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering. Journal of Biomedical Materials Research 47(3): 324-335.
21. Nather A. (2003) Biology of healing of large deep-frozen cortical bone allografts. In: Bone Biology and Healing Phillips GO (ed.), pp. 50-65.
22. Park JB, and Bronzino JD. (2003) Biomaterials: Principles and Applications, CRC Press,, Boca Raton, FL, pp. 5-20.
23. McManus AJ, Doremus RH, Siegel RW, and Bizios R. (2005) Evaluation of cytocompatibility and bending modulus of nanoceramic/polymer composites. Journal of Biomedical Materials Research 72A(1): 98-106.
24. Skalak R and Fox CF. (1988) Tissue Engineering: Proceedings of a Workshop Held at Granlibakken, Lake Tahoe, CA, Alan R Liss., New York, pp. 5-29.
25. Mooney DJ, and Mikos AG. (1999) Growing new organs. Scientific American 280(4): 60-65.
26. Sachlos E. and Caernuszka JT. (2003) Making tissue engineering scaffolds work:review on the application of solid free form fabrication technology to the production of tissue engineering scaffolds. European Cells and Materials 5: 29-40.
27. Temenoff JS, Steinbis ES, and Mikos AG. (2004) Biodegradable scaffolds. In:Orthopedic Tissue Engineering: Basic Science and Practice Goldberg VM and Caplan AI (eds), Marcel Dekker, New York, pp. 77-95.
28. Leong KF, Cheah CM, and Chua CK. (2003) Solid freeform fabrication of threedimensional scaffolds for engineering replacement tissues and organs. Biomaterials 24(13): 2363-2378.
29. Davies JE. (1996) In vitro modeling of the bone/implant interface. The Anatomical Record 245(2): 426-445.
30. Albrektsson T and Johansson C. (2001) Osteoinduction, osteoconduction and osseointegration. European Spine Journal, 10(Supply 2): S96-101.
31. Kirker-Head CA. (2000) Potential applications and delivery strategies for bone morphogenetic proteins. Advanced Drug Delivery Reviews 43(1): 65-92.
32. Silver, FH (1994) Biomaterials Medical Devices and Tissue Engineering: An Integrated Approach, Chapman & Hall, New York, pp. 4-29.
33. Park JB and Bronzino JD (2003) Biomaterials: Principles and Applications, CRC Press, Boca Raton, FL, pp. 20-77.
34. Reis RL and Cohn D. (2001) Polymer Based Systems on Tissue Engineering, Replacement and Regeneration, Kluwer Academic Publishers, Boston, pp. 69-92,130.
35. Porter BD, Oldham JB, He SL, Zobitz ME, Payne RG, An KN, Currier BL, Mikos AG, and Yaszemski MJ. (2000) Mechanical properties of a biodegradable bone regeneration scaffold. Transactions of the ASME. Journal of Biomechanical Engineering 122(3): 286-288.
36. Agrawal CM, and Ray RB. (2001) Biodegradable polymeric scaffolds for musculoskeletal tissue engineering. Journal of Biomedical Materials Research 55(2): 141-150.
37. Thomson RC, Mikos AG, Beahm E, Lemon JC, Satterfield WC, Aufdemorte TB, and Miller MJ. (1999) Guided tissue fabrication from periosteum using preformed biodegradable polymer scaffolds. Biomaterials 20(21): 2007-2018.
38. Boccaccini AR, and Maquet V. (2003) Bioresorbable and bioactive polymer/bioglass® composites with tailored pore structure for tissue engineering applications. Composites Science and Technology 63(16): 2417-2429.
39. Liu X. and Ma P.X. (2004) Polymeric scaffolds for bone tissue engineering. Annals of Biomedical Engineering 32(3): 477-486.
40. Chen VJ, and Ma PX. (2004) Nano-fibrous poly(L-lactic acid) scaffolds with interconnected spherical macropores. Biomaterials 25(11): 2065-2073.
41. Karp, JM, Shoichet MS, and Davies JE. (2003) Bone formation on twodimensional poly(DL-lactide-co-glycolide) (PLGA) films and three-dimensional PLGA tissue engineering scaffolds in vitro. Journal of Biomedical Materials Research - Part A 64(2): 388-396.
42. Liu X, and Ma PX. (2004) Polymeric scaffolds for bone tissue engineering. Annals of Biomedical Engineering 32(3): 477-486.
43. Gilding DK and Reed AM. (1979) Biodegradable polymers for use in surgery--- polyglycolic/poly(lactic acid) homo- and copolymers. Polymer 20(12): 1459-1464.
44. Rokkanen P, Bostman O, Vainionpaa S, Vihtonen K, Tormala P, Laiho J, Kilpikari J, and Tamminmaki M. (1985) Biodegradable implants in fracture fixation: early results of treatment of fractures of the ankle. Lancet 1(8443): 1422-1424.
45. Waris E, Konttinen YT, Ashammakhi N, Suuronen R, and Santavirta S. (2004) Bioabsorbable fixation devices in trauma and bone surgery: current clinical standing. Expert Review of Medical Devices 1(2): 229-240.
46. Gunatillake PA, and Adhikari R. (2003) Biodegradable synthetic polymers for tissue engineering. European Cells and Materials 5: 1-16.
47. Kohn J, Abramson S, and Langer R. (2004) Bioresorbable and bioerodible materials. In Biomaterials Science: an Introduction to Materials in Medicine Ratner BD (ed.) Elsevier Academic Press, Boston, MA, pp. 115-126.
48. Cooper SL, Visser SA, Hergenrother RW, and Lamba NMK (2004) Polymers. In:Biomaterials Science: an Introduction to Materials in Medicine Ratner BD (ed.) Elsevier Academic Press, Boston, MA, pp. 67-79.
49. Hasirci V. (2000) Biodegradable biomedical polymers: Review of degradation of and in vivo response to polylactides and polyhydroxyalkanoates. In: Biomaterials and Bioengineering Handbook Wise DL (ed.), Marcel Dekker, New York, NY, pp. 141-155.
50. Shih C. (1995) A graphical method for the determination of the mode of hydrolysis of biodegradable polymers. Pharmaceutical Research 12(12): 2036-2060.
51. Taddei P, Monti P, and Simoni R. (2002) Vibrational and thermal study on the in vitro and in vivo degradation of a poly(lactic acid)-based bioabsorbable periodontal membrane. Journal of Materials Science: Materials in Medicine 13(5): 469-475.
52. Park JB and Bronzino JD (2003) Biomaterials: Principles and Applications, CRC Press, Boca Raton, FL, pp. 99-103.
53. Barbucci R. (2002) Integrated Biomaterials Science, Kluwer Academic/Plenum Publishers, New York, pp. 5-689.
54. Yang S. Leong KF, Du Z, and Chua CK. (2001) The design of scaffolds for use in tissue engineering. Part 1. traditional factors. Tissue Engineering 7(6): 679-689.
55. Ma PX and Langer R. (1995) Degradation, structure and properties of fibrous nonwoven poly(glycolic acid) scaffolds for tissue engineering. Materials Research Society Symposium - Proceedings, Polymers in Medicine and Pharmacy 394: 99-104.
56. Zhang R and Ma PX. (2000) Degradation behavior of porous poly(α-hydroxy acids)/hydroxyapatite composite scaffolds. Polymer Preprints, published by Division of Polymer Chemistry Inc. and American Chemical Society, 41(2): 1618-1619.
57. Ciapetti G, Ambrosio L, Savarino L, Granchi D, Cenni E, Baldini N, Pagani S, Guizzardi S, Causa F, and Giunti A. (2003) Osteoblast growth and function in porous poly ?-caprolactone matrices for bone repair: a preliminary study. Biomaterials 24(21): 3815-3824.
58. Pitt CG, Chasalow FI, Hibionada YM, Klimas DM, and Schindler A. (1981) Aliphatic polyesters. I. the degradation of poly(?-caprolactone) in vivo. Journal of Applied Polymer Science 26(11): 3779-378.
59. Pitt CG, Gratzl MM, Kimmel GL, Surles J, and Schindler A. (1981) Aliphatic polyesters II. the degradation of poly(DL-lactide), poly(?-caprolactone), and their copolymers in vivo. Biomaterials 2(4): 215-220.
60. Dunn AS, Campbell PG, and Marra KG. (2001) The Influence of polymer blend composition on the degradation of polymer/hydroxyapatite biomaterial. Journal of Materials Science: Materials in Medicine 12(8): 673-677.
61. Lin W. (1999) Comparison of thermal characteristics and degradation properties of ε-caprolactone copolymers. Journal of Biomedical Materials Research: 47: 420-423.
62. Fisher JP, Vehof JWM, Dean D, Van der Waerden JPCM, Holland TA, Mikos AG, and Jansen JA. (2002) Soft and hard tissue response to photo crosslinked poly(propylene fumarate) scaffolds in a rabbit model. Journal of Biomedical Materials Research 59(3): 547-556.
63. Temenoff JS and Mikos AG. (2000) Injectable biodegradable materials for orthopedic tissue engineering. Biomaterials 21(23): 2405-2412.
64. Rodrigues CVM, Serricella P, Linhares ABR, Guerdes RM, Borojevic R, Rossi, MA, Duarte, MEL, and Farina M. (2003) Characterization of a bovine collagenhydroxyapatite composite scaffold for bone tissue engineering. Biomaterials 24(27): 4987-4997.
65. Dunn MG, Bellincampi LD, Tria AJ, and Zawadsky JP. (1997) Preliminary development of a collagen-PLA composite for ACL reconstruction. Journal of Applied Polymer Science 63(11): 1423-1428.
66. Liao SS, Cui FZ, and Zhu Y. (2004) Osteoblasts adherence and migration through three-dimensional porous mineralized collagen based composite: nHAC/PLA. Journal of Bioactive and Compatible Polymers 19(2): 117-130.
67. Ren L, Tsuru K, Hayakawa S, and Osaka A (2002) Novel approach to fabricate porous gelatin-siloxane hybrids for bone tissue engineering. Biomaterials 23(24): 4765-4773.
68. Yin Y, Ye F, Cui J, Zhang F, Li X, and Yao K. (2003) Preparation and characterization of macroporous chitosan-gelatin/β-tricalcium phosphate composite scaffolds for bone tissue engineering. Journal of Biomedical Materials Research -Part A, 67(3): 844-855.
69. Zhao F, Yin Y, Lu WW, Leong JC, Zhang W, Zhang J, Zhang M, and Yao K (2002) Preparation and histological evaluation of biomimetic three-dimensional hydroxyapatite/chitosan-gelatin network composite scaffolds. Biomaterials 23(15):3227-3234.
70. Lawson AC and Czernuszka JT. (1998) Collagen-calcium phosphate composites. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 212(H6): 413-425.
71. Tadic D, and Epple M. (2004) A thorough physicochemical characterisation of 14 calcium phosphate-based bone substitution materials in comparison to natural bone. Biomaterials 25(6): 987-994.
72. Ramay HRR and Zhang M. (2004) Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering. Biomaterials 25(21):5171-5180.
73. LeGeros RZ Lin S, Rohanizadeh R Mijares D, and Legeros JP. (2003) Biphasic calcium phosphate bioceramics: preparation, properties and applications. Journal of Materials Science: Materials in Medicine 14(3): 201-209.
74. Hench LL and Polak JM. (2002) Third-generation biomedical materials. Science 295(5557): 1014-1017.
75. Ducheyne P and de Groot K. (1981) In vivo surface activity of a hydroxyapatite alveolar bone substitute. Journal of Biomedical Materials Research 15(3): 441-445.
76. Rabiei A and Thomas B. (2005) Processing and development of nano-scale HA coating for biomedical application. Materials Research Society Symposium Proceeding 845: 193-199.
77. Hutmacher DW. (2000) Scaffolds in tissue engineering bone and cartilage. Biomaterials 21(24): 2529-2543.
78. Thomson RC, Yaszemski MJ, Powers JM, and Mikos AG. (1998) Hydroxyapatite fiber reinforced poly(α-hydroxy ester) foams for bone regeneration. Biomaterials 19(21): 1935-1943.
79. Boccaccini AR, Roether JA, Hench LL, Maquet V, and Jerome R. (2002) A composite approach to tissue engineering. Ceramic Engineering and Science Proceedings 23(4): 805-816.
80. Marra KG, Szem JW, Kumta PN, DiMilla PA, and Weiss LE. (1999) In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering. Journal of Biomedical Materials Research 47(3): 324-335.
81. Kalita S, Finley J, Bose S, Hosick H, and Bandyopadhyay A. (2002) Development of porous polymer-ceramic composites as bone grafts. Materials Research Society Symposium Proceedings 726: 91-96.
82. Blaker JJ, Gough JE, Maquet V, Notingher I, and Boccaccini AR. (2003) In vitro evaluation of novel bioactive composites based on bioglass®-filled polylactide foams for bone tissue engineering scaffolds. Journal of Biomedical Materials Research-Part A 67(4): 1401-1411.
83. Ma PX, Zhang R, Xiao G, and Franceschi R. (2001) Engineering new bone tissue in vitro on highly porous poly(α-hydroxyl acids)/hydroxyapatite composite scaffolds. Journal of Biomedical Materials Research 54(2): 284-293.
84. Kasuga T, Ota Y, Nogami M, and Abe Y. (2001) Preparation and Mechanical Properties of Polylactic Acid Composites Containing Hydroxyapatite fibers. Biomaterials: 22(1): 19-23.
85. Navarro M, Ginebra MP, Planell JA, Zeppetelli S, and Ambrosio L. (2004) Development and cell response of a new biodegradable composite scaffold for guided bone regeneration. Journal of Materials Science: Materials in Medicine 15(4): 419-422.
86. Khan YM, Katti DS, and Laurencin CT. (2004) Novel polymer-synthesized ceramic composite-based system for bone repair: an in vitro evaluation. Journal of Biomedical Materials Research - Part A 69(4): 728-737.
87. Rho JY, Kuhn-Spearing L, and Zioupos P. (1998) Mechanical properties and the hierarchical structure of bone. Medical Engineering & Physics 20(2): 92-102.
88. Khan, Y.M., Katti, D.S., and Laurencin, C.T. (2004) Novel polymer-synthesized ceramic composite-based system for bone repair: An in vitro evaluation. Journal of Biomedical Materials Research: A 69: 728-737.
89. Kikuchi M, Cho SB, Suetsugu Y, and Tanaka J. (1997) In vitro tests and in vivo tests developed TCP/CPLA composites. Bioceramics 10: 407-410.
90. Du C, Cui FZ, Zhu XD, and de Groot K. (1999) Three-dimensional nano-HAP/collagen matrix loading with osteogenic cells in organ culture. Journal of Biomedical Materials Research 44(4): 407-415.
91. Webster TJ, Siegel RW, and Bizios R. (2001) Nanoceramic surface roughness enhances osteoblast and osteoclast functions for improved orthopaedic/dental implant efficacy. Scripta Materialia 44(8-9): 1639-1642.
92. Webster TJ, Ergun C, Doremus RH, Siegel RW, and Bizios R. (2000) Specific proteins mediate enhanced osteoblast adhesion on nanophase ceramics. Journal of Biomedical Materials Research 51(3): 475-483.
93. Webster TJ, Siegel RW, and Bizios R. (1999) Osteoblast adhesion on nanophase ceramics. Biomaterials 20(13): 1221-1227.
94. Dulgar Tulloch AJ, Bizios R, and Siegel RW. (2003) Nanophase alumina/poly(Llactic acid) composite scaffolds for biomedical applications. Materials Research Society Symposium Proceedings 740: 161-166.
95. Webster TJ, Siegel RW, and Bizios R. (2001) Nanoceramic surface roughness enhances osteoblast and osteoclast functions for improved orthopaedic/dental implant efficacy. Scripta Materialia 44(8-9): 1639-1642.
96. Yamasaki H and Sakai H. (1992) Osteogenic response to porous hydroxyapatite ceramics under the skin of dogs. Biomaterials 13(5): 308-312.
97. Yuan H, Kurashina K, de Bruijin JD, Li Y, de Grout K, and Zhang X. (1999) A preliminary study on osteoinduction of two kinds of calcium phosphate ceramics. Biomaterials 20(19): 1799-1806.
98. Liu H, Slamovich EB, and Webster TJ. (2005) Increased osteoblast functions on nanophase titania dispersed in poly-lactic-co-glycolic acid composites. Nanotechnology 16(7): S601-S608.
99. Webster TJ, Schadler LS, Siegel RW, and Bizios R. (2001) Mechanisms of enhanced osteoblast adhesion on nanophase alumina involve vitronectin. Tissue Engineering 7(3): 291-302.
100. Qin XY, Kim JG, and Lee JS. (1999) Synthesis and magnetic properties of nanostructured γ-Ni-Fe alloys. Nanostructured Materials 11(2): 259-270.
101. Li P, Miser DE, Rabiei S, Yadav RT, and Hajaligol MR. (2003) The removal of carbon monoxide by iron oxide nanoparticles. Applied Catalysis B: Environmental 43(2): 151-162.
102. Surowiak Z, Osinska, K, and Czekaj D. (2001) Structure and physical properties of nano-structured Pb(Zr0.5Ti0.5)O3 piezoceramics. Proceedings of SPIE-The International Society for Optical Engineering 4413: 163-168.
103. Suh SW, Shin JY, Kim J, Kim J, Beak CH, Kim DI, Kim H, Jeon SS, and Choo IW. (2002) Effect of different particles on cell proliferation in polymer scaffolds using a solvent-casting and particulate leaching technique. ASAIO Journal 48(5):460-464.
104. Shastri V P, Martin I, and Langer R. (2000) Macroporous polymer foams by hydrocarbon templating. Proceedings of the National Academy of Sciences USA 97: 1970-1975.
105. Wu L, Zhang H, Zhang J, and Ding J. (2005) Fabrication of three-dimensional porous scaffolds of complicated shape for tissue engineering. I. Compression molding based on flexible-rigid combined mold. Tissue Engineering 11(7-8): 1105-1114.
106. Harris LD, Kim BS, and Mooney DJ. (1998) Open pore biodegradable matrices formed with gas foaming. Journal of Biomedical Materials Research 42: 396-402.
107. Kim SS, Park MS, Jeon O, Choi CY, and Kim BS. (2006) Poly(lactide-colycolide)/ hydroxyapatite composite scaffolds for bone tissue engineering. Biomaterials 27(8): 1399-1409.
108. Nam Y S, Yoon J J, and Park T G. (2000) A novel fabrication method of macroporous biodegradable polymer scaffolds using gas foaming salt as a porogen additive. Journal of Biomedical Materials Research: Part B Applied Biomaterials 53: 1-7.
109. Whang K, Thomas C H, Healy K E, and Nuber G. (1995) Novel method to fabricate bioabsorbable scaffolds. Polymer 36(4): 837-842.
110. Liu L, Zhang, L, Ren B, Wang F, and Zhang Q. (2003) Preparation and characterization of collagen-hydroxyapatite composite used for bone tissue engineering scaffold. Artificial Cells, Blood Substitutes, and Biotechnology 31(4):435-448.
111. Lo H, Kadiyala S, Guggino SE, and Leong KW. (1996) Poly(L-lactic acid) foams with cell seeding and controlled-release capacity. Journal of Biomedical Materials Research 30: 475-484.
112. Lo H, Ponticiello MS, and Leong KW. (1995) Fabrication of controlled release biodegradable foams by phase separation. Tissue Engineering 1: 15-28.
113. Schugens C, Maquet V, Grandfils C, Jerome R, and Teyssie P. (1996) Polylactide macroporous biodegradable implants for cell transplantation II. Preparation of polylactide foams for liquid-liquid phase separation. Journal of Biomedical Materials Research 30: 449-461.
114. Nam YS, and Park TG. (1996) Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. Journal of Biomedical Materials Research 47: 17.