Understanding dental CAD/CAM for restorations - accuracy from a mechanical engineering viewpoint

International Journal of Computerized Dentistry

Volumn 18, Issue 4, 2015, Pages 343-367

  Tapie, Laurent ^a,b   Lebon, Nicolas ^a,b   Mawussi, Bernardin ^a,b   Fron Chabouis, Hélène ^b,c   Duret, Francois ^d   Attal, Jean Pierre ^b,c  

^a UNIVERSITÉ PARIS 13   (France)

^b Faculty of Dental Surgery Paris 7   (France)

^c HÔPITAL CHARLES FOIX   (France)

^d Odontologic Sciences   (France)

Author keywords

Accuracy; Dental CAD CAM; Digital dentistry; Geometric approximations; Geometric defectss

Indexed keywords

ALGORITHM; COMPUTER AIDED DESIGN; COMPUTER INTERFACE; COMPUTER SIMULATION; DENTAL TECHNOLOGY; DEVICES; ENGINEERING; EQUIPMENT DESIGN; HUMAN; REPRODUCIBILITY; STANDARDS; STATISTICS AND NUMERICAL DATA; SURFACE PROPERTY; TOOTH PROSTHESIS; WORKFLOW;

ALGORITHMS; COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; DENTAL PROSTHESIS; DENTAL PROSTHESIS DESIGN; ENGINEERING; EQUIPMENT DESIGN; HUMANS; REPRODUCIBILITY OF RESULTS; SURFACE PROPERTIES; TECHNOLOGY, DENTAL; USER-COMPUTER INTERFACE; WORKFLOW;

EID: 84965085253     PISSN: 14634201     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (53)

1. Fasbinder DJ. Computerized technology for restorative dentistry. Am J Dent 2013;26:115-120
2. van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3-12
3. Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater 2009;28:44-56
4. Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J 2008;204:505-511
5. Tapie L, Lebon N, Mawussi B, Fron Chabouis H, Duret F, Attal J-P. Understanding dental CAD/CAM for restorations-the digital workflow from a mechanical engineering viewpoint, Int J Comput Dent 2015;18:21-44
6. Ng J, Ruse D, Wyatt C. A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent 2014;112:555-560
7. Boitelle P, Mawussi B, Tapie L, Fromentin O. A systematic review of CAD/CAM fit restoration evaluations. J Oral Rehabil 2014;41:853-874
8. ISO 5725-1:1998. Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 1: General Principles and Definitions
9. ISO 5725-2:2002. Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 2: Methods for the Determination of Repeatability and Reproducibility
10. ISO 5725-3:2001. Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 3: Intermediate Measures of the Precision of a Standard Measurement Method
11. ISO 5725-4:1994. Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 4: Basic Methods for the Determination of the Trueness of a Standard Measurement Method
12. ISO 5725-5:2005. Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 5: Alternative Methods for the Determination of the Precision of a Standard Measurement Method
13. ISO 5725-6:2001. Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 6: Use in Practice of Accuracy Values
14. Duret F, Blouin JL, Brouillat C, et al. Rapport Odontologique: La CFAO dentaire, Ministry of Research (ed). Vol. 1, ANVAR, 1987:140. English version available at: http://www.francois-duret.com/Accueil/media/ download/Publication/97-FD%201987%20-%20CFAO%20 ANVAR%20tome%201%20UK.pdf
15. Duret F, Blouin JL, Brouillat C, et al. Rapport Odontologique: La CFAO dentaire, Ministry of Research (ed). Vol. 2, ANVAR, 1987:142. English version available at: http://www.francois-duret.com/Accueil/media/ download/Publication/101-FD%201987%20-%20CFAO%20 ANVAR%20tome%202%20UK.pdf
16. Duret F. Empreinte Optique. PhD dissertation in the Faculté d'Ondontologie. Lyon: Université Claude Bernard, 1973:400. Available at: http://www.francois-duret.com
17. Hollenbeck K, Allin T, van der Poel M. Technical report, Dental Lab 3D Scanners-How they work and what works best. 3Shape Technology Research, Copenhagen, 2012
18. ISO 12836:2012. Dentistry-Digitizing Devices for CAD/CAM Systems for Indirect Dental Restorations-Test Methods for Assessing Accuracy
19. Nedelcu RG, Persson AS. Scanning accuracy and precision in 4 intraoral scanners: an in vitro comparison based on 3-dimensional analysis. J Prosthet Dent 2014;112:1461-1471
20. Hayashi K, Sachdeva AU, Saitoh S, Lee SP, Kubota T, Mizoguchi I. Assessment of the accuracy and reliability of new 3-dimensional scanning devices. Am J Orthod Dentofacial Orthop 2013;144:619-625
21. Ireland AJ, McNamara C, Clover MJ, et al. 3D surface imaging in dentistry-what we are looking at. Br Dent J 2008;205:387-392
22. Lee RT, Shiou FJ. Multi-beam laser probe for measuring position and orientation of freeform surface. Measurement 2011;44:1-10
23. Blanco D, Fernandez P, Cuesta E, Mateos S, Beltrán N. Influence of surface material on the quality of laser triangulation digitized point clouds for reverse engineering tasks. In: Emerging Technologies & Factory Automation (ETFA) 2009, IEEE International Conference, IEEE, 2009:1-8
24. Bajard A, Aubreton O, Bokhabrine Y, et al. Three-dimensional scanning of specular and diffuse metallic surfaces using an infrared technique. Optical Engineering 2012;51:063603-1-063603-12
25. Trifkovic B, Budak I, Todorovic A, Vukelic D, Lazic V, Puskar T. Comparative analysis on measuring performances of dental intraoral and extraoral optical 3D digitization systems. Measurement 2014;47:45-53
26. Budak I, Vukelic D, Bracun D, Hodolic J, Sokovic M. Pre-processing of point-data from contact and optical 3D digitization sensors. Sensors 2012;12:1100-1126
27. Song YL, Li J, Yin L, Huang T, Gao P. The feature-based posterior crown design in a dental CAD/CAM system. Int J Adv Manuf Technol 2007;31:1058-1065
28. Mehl A, Blanz V, Hickel R. Biogeneric tooth: a new mathematical representation for tooth morphology in lower first molars. Eur J Oral Sci 2005;113: 333-340
29. Williams RJ, Bibb R, Eggbeer D, Collis J. Use of CAD/CAM technology to fabricate a removable partial denture framework. J Prosthet Dent 2006;96:96-99
30. Zhao M, Ma L, Tan W, Nie D. Interactive tooth segmentation of dental models. In: Engineering in Medicine and Biology Society, IEEE, 2005:654-657
31. Yau HT, Hsu CY, Peng HL, Pai CC. Computer-aided framework design for digital dentistry. Comput Aided Des Appl 2008:5;667-675
32. Sansoni G, Docchio F. Three-dimensional optical measurements and reverse engineering for automotive applications. Robotics and Computer-Integrated Manufacturing 2004;20:359-367
33. Zheng SX, Li J, Sun QF. A novel 3D morphing approach for tooth occlusal surface reconstruction. Computer-Aided Design 2011;43: 293-302
34. Adolph S, Gürke S. Modeling of a fitting inlay from various information. In: Vision Modeling and Visualization Conference (VMV), 2001:309-316
35. Leu MC, Delli P, Walker MP. Digital Design and Fabrication in Dentistry. In: Bidanda B, Bartolo P (eds). Bio-Materials and Prototyping Applications in Medicine. Springer Science Inc, 2008:125-152
36. Reich S, Troeltzsch M, Denekas T, Wichmann M. Generation of functional Cerec 3D occlusal surfaces: a comparison of two production methods relevant in practice. Int J Comput Dent 2004;7:229-238
37. Yau HT, Chen HC, Yu PJ. A Customized Smart CAM System for Digital Dentistry. Computer-Aided Design and Applications 2011;8:395-405
38. Kim T. Constant cusp height tool paths as geodesic parallels on an abstract Riemannian manifold. Computer-Aided Design 2007;39: 477-489
39. ISO 2806:1994. Industrial Automation Systems-Numerical Control of Machines-Vocabulary
40. ISO 6983-1:2009, Automation Systems and Integration-Numerical Control of Machines-Program Format and Definition of Address Words, Part 1. Data Format for Positioning, Line Motion and Contouring Control Systems
41. Dripke C, Groh F, Keinert M, Verl A. A New Approach to Interpolation of Tool Path Trajectories with Piecewise Defined Clothoids. In: Enabling Manufacturing Competitiveness and Economic Sustainability. Springer International Publishing, 2014:249-254
42. ISO 841-1:2001. Industrial Automation Systems and Integration-Numerical Control of Machines-Coordinate System and Motion Nomenclature
43. Chanal H, Duc E, Ray P. A study of the impact of machine tool structure on machining processes. Int J Mach Tools Manuf 2006;46:98-106
44. Okafor AC, Ertekin YM. Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics. Int J Mach Tools Manuf 2000;40: 1199-1213
45. Yang XD, Wang Y, Yang P. 3-D Modeling for Teeth Correction on the Basis of Optical Measurement. Applied Mechanics and Materials 2007;10-12:662-666
46. Yin L, Song XF, Qu SF, Han YG, Wang H. Surface integrity and removal mechanism in simulated dental finishing of a feldspathic porcelain. Journal of Biomedical Materials Research Part B Applied Biomaterials 2006;79:365-378
47. Bosch G, Ender A, Mehl A. A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes. J Prosthet Dent 2014;112:1425-1431
48. Probst FA, Litzenburger AP, Richter MJ, Mehl AC. Similarity measure for quality control of dental CAD/CAM-applications. Comput Biol Med 2012;42:1086-1090
49. Ng J, Ruse D, Wyatt C. A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent 2014;112:555-560
50. Drago C, Saldarriaga RL, Domagala D, Almasri R. Volumetric determination of the amount of misfit in CAD/CAM and cast implant frameworks: a multicenter laboratory study. Int J Oral Maxillofac Implants 2010;25:920-929
51. Scotti R, Cardelli P, Baldissara P, Monaco C. Clinical fitting of CAD/ CAM zirconia single crowns generated from digital intraoral impressions based on active wavefront sampling. J Dent [epub ahead of print 17 October 2011]
52. Moldovan O, Luthardt RG, Corcodel N, Rudolph H. Three-dimensional fit of CAD/CAM-made zirconia copings. Dent Mater 2011;27: 1273-1278
53. Katoh H, Kasahara S, Ebihara Y, Kikuchi K. Evaluation of the Accuracy of CAD/CAM Crowns Fabricated Using CT Images. In: Interface Oral Health Science 2011. Japan: Springer, 2012:265-267