An improved co-evolutionary algorithm for green manufacturing by integration of recovery option selection and disassembly planning for end-of-life products

International Journal of Production Research

Volumn 54, Issue 18, 2016, Pages 5567-5593

  Meng, Kai ^a   Lou, Peihuang ^a   Peng, Xianghui ^b   Prybutok, Victor ^c  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

^b EASTERN WASHINGTON UNIVERSITY   (United States)

^c UNIVERSITY OF NORTH TEXAS   (United States)

Author keywords

co evolutionary algorithm; computational experiments; disassembly planning; end of life product recovery; meta heuristics

Indexed keywords

COMPUTER SUPPORTED COOPERATIVE WORK; DECISION MAKING; DECISION SUPPORT SYSTEMS; RECOVERY; SUPPLY CHAINS;

CO-EVOLUTIONARY ALGORITHM; COMPUTATIONAL EXPERIMENT; DISASSEMBLY PLANNING; END-OF-LIFE PRODUCTS; META HEURISTICS;

EVOLUTIONARY ALGORITHMS;

EID: 84964514073     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207543.2016.1176263     Document Type: Article

References (59)

1. M.Ali Ilgin,, O.Ondemir, and S.M.Gupta. 2014. “An Approach to Quantify the Financial Benefit of Embedding Sensors into Products for End-of-life Management: A Case Study.” Production Planning & Control 25 (1): 26–43.
2. S.Behdad,, M.Kwak, H.Kim, and D.Thurston. 2010. “Simultaneous Selective Disassembly and End-of-life Decision Making for Multiple Products That Share Disassembly Operations.” Journal of Mechanical Design 132 (4): 041002.10.1115/1.4001207
3. A.Bufardi,, R.Gheorghe, D.Kiritsis, and P.Xirouchakis. 2004. “Multicriteria Decision-aid Approach for Product End-of-life Alternative Selection.” International Journal of Production Research 42 (16): 3139–3157.10.1080/00207540410001699192
4. A.Desai,, and A.Mital. 2003. “Evaluation of Disassemblability to Enable Design for Disassembly in Mass Production.” International Journal of Industrial Ergonomics 32 (4): 265–281.10.1016/S0169-8141(03)00067-2
5. D.Dhouib,, and S.Elloumi. 2011. “A New Multi-criteria Approach Dealing with Dependent and Heterogeneous Criteria for End-of-life Product Strategy.” Applied Mathematics and Computation 218 (5): 1668–1681.10.1016/j.amc.2011.06.046
6. European Union. 2003a. “Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on Waste of Electrical and Electronics Equipment (WEEE).” Official Journal of the European Union 13.02.2003 L37: 0024–0039.
7. European Union. 2003b. Council Directive of 15 July 1975 on Waste (75/442/EEC). http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CONSLEG:1975L0442:20031120:EN:PDF.
8. S.Gerner,, A.Kobeissi, B.David, Z.Binder, and B.Descotes-Genon. 2005. “Integrated Approach for Disassembly Processes Generation and Recycling Evaluation of an End-of-life Product.” International Journal of Production Research 43 (1): 195–222.10.1080/00207540412331270414
9. J.Gerrard,, and M.Kandlikar. 2007. “Is European End-of-life Vehicle Legislation Living up to Expectations? Assessing the Impact of the ELV Directive on ‘Green’ Innovation and Vehicle Recovery.” Journal of Cleaner Production 15 (1): 17–27.10.1016/j.jclepro.2005.06.004
10. T.F.Go,, D.A.Wahab, M.A.Rahman, R.Ramli, and A.Hussain. 2012. “Genetically Optimised Disassembly Sequence for Automotive Component Reuse.” Expert Systems with Applications 39 (5): 5409–5417.10.1016/j.eswa.2011.11.044
11. B.González,, and B.Adenso-Díaz. 2005. “A Bill of Materials-based Approach for End-of-life Decision Making in Design for the Environment.” International Journal of Production Research 43 (10): 2071–2099.10.1080/00207540412331333423
12. D.E.Grochowski,, and Y.Tang. 2009. “A Machine Learning Approach for Optimal Disassembly Planning.” International Journal of Computer Integrated Manufacturing 22 (4): 374–383.10.1080/09511920802024176
13. A.Güngör,, and S.M.Gupta. 1999. “Issues in Environmentally Conscious Manufacturing and Product Recovery: A Survey.” Computers & Industrial Engineering 36 (4): 811–853.
14. A.Güngör,, and S.M.Gupta. 2001. “Disassembly Sequence Plan Generation using a Branch-and-Bound Algorithm.” International Journal of Production Research 39 (3): 481–509.
15. W.Hui,, X.Dong, and D.Guanghong. 2008. “A Genetic Algorithm for Product Disassembly Sequence Planning.” Neurocomputing 71 (13): 2720–2726.10.1016/j.neucom.2007.11.042
16. A.Hula,, K.Jalali, K.Hamza, S.J.Skerlos, and K.Saitou. 2003. “Multi-criteria Decision-making for Optimization of Product Disassembly under Multiple Situations.” Environmental Science & Technology 37 (23): 5303–5313.
17. M.A.Ilgin,, and S.M.Gupta. 2010. “Environmentally Conscious Manufacturing and Product Recovery (ECMPRO): A Review of the State of the Art.” Journal of Environmental Management 91 (3): 563–591.10.1016/j.jenvman.2009.09.037
18. B.W.Jacobs,, and R.Subramanian. 2012. “Sharing Responsibility for Product Recovery Across the Supply Chain.” Production and Operations Management 21 (1): 85–100.10.1111/poms.2011.21.issue-1
19. M.R.Johnson,, and I.P.McCarthy. 2014. “Product Recovery Decisions within the Context of Extended Producer Responsibility.” Journal of Engineering and Technology Management 34: 9–28.10.1016/j.jengtecman.2013.11.002
20. H.B.Jun,, M.Cusin, D.Kiritsis, and P.Xirouchakis. 2007. “A Multi-objective Evolutionary Algorithm for EOL Product Recovery Optimization: Turbocharger Case Study.” International Journal of Production Research 45 (18–19): 4573–4594.10.1080/00207540701440071
21. H.B.Jun,, J.H.Shin, Y.S.Kim, D.Kiritsis, and P.Xirouchakis. 2009. “A Framework for RFID Applications in Product Lifecycle Management.” International Journal of Computer Integrated Manufacturing 22 (7): 595–615.10.1080/09511920701501753
22. J.G.Kang,, D.H.Lee, P.Xirouchakis, and J.G.Persson. 2001. “Parallel Disassembly Sequencing with Sequence-Dependent Operation Times.” CIRP Annals – Manufacturing Technology 50 (1): 343–346.10.1016/S0007-8506(07)62136-2
23. S.Kara,, P.Pornprasitpol, and H.Kaebernick. 2005. “A Selective Disassembly Methodology for End-of-life Products.” Assembly Automation 25 (2): 124–134.
24. Y.K.Kim,, K.Park, and J.Ko. 2003. “A Symbiotic Evolutionary Algorithm for the Integration of Process Planning and Job Shop Scheduling.” Computers & Operations Research 30 (8): 1151–1171.
25. Y.K.Kim,, J.Y.Kim, and Y.Kim. 2006. “An Endosymbiotic Evolutionary Algorithm for the Integration of Balancing and Sequencing in Mixed-model U-lines.” European Journal of Operational Research 168 (3): 838–852.10.1016/j.ejor.2004.07.032
26. E.Kongar,, and S.M.Gupta. 2006. “Disassembly Sequencing using Genetic Algorithm.” The International Journal of Advanced Manufacturing Technology 30 (5–6): 497–506.10.1007/s00170-005-0041-x
27. H.R.Krikke,, A.van Harten, and P.C.Schuur. 1998. “On a Medium Term Product Recovery and Disposal Strategy for Durable Assembly Products.” International Journal of Production Research 36 (1): 111–140.10.1080/002075498193967
28. T.C.Kuo, 2006. “Enhancing Disassembly and Recycling Planning using Life-cycle Analysis.” Robotics and Computer-Integrated Manufacturing 22 (5–6): 420–428.10.1016/j.rcim.2005.11.014
29. T.C.Kuo, 2013. “Waste Electronics and Electrical Equipment Disassembly and Recycling using Petri Net Analysis: Considering the Economic Value and Environmental Impacts.” Computers & Industrial Engineering 65 (1): 54–64.
30. A.J.D.Lambert, 2006. “Exact Methods in Optimum Disassembly Sequence Search for Problems Subject to Sequence Dependent Costs.” Omega 34 (6): 538–549.10.1016/j.omega.2005.01.005
31. S.G.Lee,, S.W.Lye, and M.K.Khoo. 2001. “A Multi-objective Methodology for Evaluating Product End-of-life Options and Disassembly.” The International Journal of Advanced Manufacturing Technology 18 (2): 148–156.10.1007/s001700170086
32. H.B.Lee,, N.W.Cho, and Y.S.Hong. 2010. “A Hierarchical End-of-life Decision Model for Determining the Economic Levels of Remanufacturing and Disassembly under Environmental Regulations.” Journal of Cleaner Production 18 (13): 1276–1283.10.1016/j.jclepro.2010.04.010
33. H.M.Lee,, W.F.Lu, and B.Song. 2014. “A Framework for Assessing Product End-of-life Performance: Reviewing the State of the Art and Proposing an Innovative Approach using an End-of-life Index.” Journal of Cleaner Production 66: 355–371.10.1016/j.jclepro.2013.11.001
34. W.D.Li,, K.Xia, L.Gao, and K.M.Chao. 2013. “Selective Disassembly Planning for Waste Electrical and Electronic Equipment with Case Studies on Liquid Crystal Displays.” Robotics and Computer-Integrated Manufacturing 29 (4): 248–260.10.1016/j.rcim.2013.01.006
35. X.Liu,, G.Peng, X.Liu, and Y.Hou. 2012. “Disassembly Sequence Planning Approach for Product Virtual Maintenance Based on Improved Max–Min Ant System.” The International Journal of Advanced Manufacturing Technology 59 (5–8): 829–839.10.1007/s00170-011-3531-z
36. Y.S.Ma,, H.B.Jun, H.W.Kim, and D.H.Lee. 2011. “Disassembly Process Planning Algorithms for End-of-life Product Recovery and Environmentally Conscious Disposal.” International Journal of Production Research 49 (23): 7007–7027.10.1080/00207543.2010.495089
37. C.Moon,, J.Kim, G.Choi, and Y.Seo. 2002. “An Efficient Genetic Algorithm for the Traveling Salesman Problem with Precedence Constraints.” European Journal of Operational Research 140 (3): 606–617.10.1016/S0377-2217(01)00227-2
38. K.E.Moore,, A.Güngör, and S.M.Gupta. 2001. “Petri Net Approach to Disassembly Process Planning for Products with Complex AND/OR Precedence Relationships.” European Journal of Operational Research 135 (2): 428–449.10.1016/S0377-2217(00)00321-0
39. O.Ondemir,, M.A.Ilgin, and S.M.Gupta. 2012. “Optimal End-of-life Management in Closed-loop Supply Chains using RFID and Sensors.” Industrial Informatics, IEEE Transactions 8 (3): 719–728.10.1109/TII.2011.2166767
40. A.K.Parlikad,, and D.McFarlane. 2007. “RFID-based Product Information in End-of-life Decision Making.” Control Engineering Practice 15 (11): 1348–1363.10.1016/j.conengprac.2006.08.008
41. J.L.Rickli,, and J.A.Camelio. 2013. “Multi-objective Partial Disassembly Optimization based on Sequence Feasibility.” Journal of Manufacturing Systems 32 (1): 281–293.10.1016/j.jmsy.2012.11.005
42. S.Shokohyar,, S.Mansour, and B.Karimi. 2014. “A Model for Integrating Services and Product EOL Management in Sustainable Product Service System (S-PSS).” Journal of Intelligent Manufacturing 25 (3): 427–440.10.1007/s10845-012-0694-x
43. H.Srinivasan,, R.Figueroa, and R.Gadh. 1999. “Selective Disassembly for Virtual Prototyping as Applied to De-Manufacturing.” Robotics and Computer-Integrated Manufacturing 15 (3): 231–245.10.1016/S0736-5845(99)00023-X
44. T.Staikos,, and S.Rahimifard. 2007. “A Decision-making Model for Waste Management in the Footwear Industry.” International Journal of Production Research 45 (18–19): 4403–4422.10.1080/00207540701450187
45. Y.Tang,, M.Zhou, and R.J.Caudill. 2001. “An Integrated Approach to Disassembly Planning and Demanufacturing Operation.” Robotics and Automation, IEEE Transactions on 17 (6): 773–784.10.1109/70.975899
46. J.Um,, J.S.Yoon, and S.H.Suh. 2008. “An Architecture Design with Data Model for Product Recovery Management Systems.” Resources, Conservation and Recycling 52 (10): 1175–1184.10.1016/j.resconrec.2008.06.001
47. R.Venkata Rao,, and B.K.Patel. 2010. “Decision Making in the Manufacturing Environment Using an Improved PROMETHEE Method.” International Journal of Production Research 48 (16): 4665–4682.10.1080/00207540903049415
48. H.D.Wan,, and V.Krishna Gonnuru. 2013. “Disassembly Planning and Sequencing for End-of-life Products with RFID Enriched Information.” Robotics and Computer-Integrated Manufacturing 29 (3): 112–118.10.1016/j.rcim.2012.05.001
49. A.Xanthopoulos,, and E.Iakovou. 2009. On the Optimal Design of the Disassembly and Recovery Processes. Waste Management 29 (5), 1702–1711.10.1016/j.wasman.2008.11.009
50. L.N.Xing,, Y.W.Chen, and K.W.Yang. 2011. “Multi-population Interactive Coevolutionary Algorithm for Flexible Job Shop Scheduling Problems.” Computational Optimization and Applications 48 (1): 139–155.10.1007/s10589-009-9244-7
51. X.Xu, 2012. “From Cloud Computing to Cloud Manufacturing.” Robotics and Computer-Integrated Manufacturing 28 (1): 75–86.10.1016/j.rcim.2011.07.002
52. D.F.Xu,, Q.Li, H.B.Jun, J.Browne, Y.L.Chen, and D.Kiritsis. 2009. “Modelling for Product Information Tracking and Feedback via Wireless Technology in Closed-loop Supply Chains.” International Journal of Computer Integrated Manufacturing 22 (7): 648–670.10.1080/09511920701675755
53. M.A.Potter, 1997. The Design and Analysis of a Computational Model of Cooperative Coevolution (Doctoral dissertation), George Mason University.
54. X.Yang,, P.Moore, and S.K.Chong. 2009. “Intelligent Products: From Lifecycle Data Acquisition to Enabling Product-related Services.” Computers in Industry 60 (3): 184–194.10.1016/j.compind.2008.12.009
55. W.C.Yeh, 2012a. “Optimization of the Disassembly Sequencing Problem on the Basis of Self-adaptive Simplified Swarm Optimization.” Systems, Man and Cybernetics, Part A: Systems and Humans, IEEE Transactions 42 (1): 250–261.10.1109/TSMCA.2011.2157135
56. W.C.Yeh, 2012b. “Simplified Swarm Optimization in Disassembly Sequencing Problems with Learning Effects.” Computers & Operations Research 39 (9): 2168–2177.
57. A.Ziout,, A.Azab, and M.Atwan. 2014. “A Holistic Approach for Decision on Selection Of End-of-life Products Recovery Options.” Journal of Cleaner Production 65: 497–516.10.1016/j.jclepro.2013.10.001
58. R.Zuidwijk,, and H.Krikke. 2008. “Strategic Response to EEE returns: Product Eco-design or New Recovery Processes?” European Journal of Operational Research 191 (3): 1206–1222.10.1016/j.ejor.2007.08.004
59. E.Zussman,, and M.Zhou. 1999. “A Methodology for Modeling and Adaptive Planning of Disassembly Processes.” Robotics and Automation, IEEE Transactions 15 (1): 190–194.10.1109/70.744614