Three-dimensional finite element simulation of a polycrystalline copper specimen

Acta Materialia

Volumn 55, Issue 12, 2007, Pages 4121-4136

  Musienko, A ^a   Tatschl, A ^b   Schmidegg, K ^a,b   Kolednik, O ^b   Pippan, R ^b   Cailletaud, G ^a  

^a PSL RESEARCH UNIVERSITY   (France)

^b ERICH SCHMID INSTITUTE OF MATERIALS SCIENCE   (Austria)

Author keywords

Crystal plasticity; Finite element; OFHC copper; Strain field measurement

Indexed keywords

COMPUTATION THEORY; COPPER; CRYSTAL MICROSTRUCTURE; CRYSTALS; FINITE ELEMENT METHOD; PLASTICITY; SINGLE CRYSTALS;

COPPER SPECIMEN; MONOTONIC TENSION; MULTICRYSTALS; STRAIN FIELD MEASUREMENT;

POLYCRYSTALS;

EID: 34249938707     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2007.01.053     Document Type: Article

References (47)

1. Engel J-J. Modélisation du comportement global des métaux en plasticité et en viscoplasticité. PhD thesis, Ecole Nationale Supérieure des Mines de Paris, 1978.
2. Kalidindi S.R., Bronkhorst C.A., and Anand L. Crystallographic texture evolution in bulk deformation processing of FCC metals. J Mech Phys Sol 40 3 (1992) 537-569
3. Sarma D.P., and Dawson P.R. Texture predictions using a polycrystal plasticity model incorporating neighbor interactions. Int J of Plasticity 12 8 (1996) 1023-1054
4. Miehe C., Schröder J., and Schotte J. Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials. Comp Meth Appl Mech Engng 171 3-4 (1999) 387-418
5. Anand L., and Kothari M. A computational procedure for rate-independent crystal plasticity. J Mech Phys Sol 44 4 (1996) 525-558
6. Mika D.P., and Dawson P.R. Effects of grain interaction on deformation in polycrystals. Materials Science and Engineering A 257 1 (1998) 62-76
7. Mika D.P., and Dawson P.R. Polycrystal plasticity modeling of intracrystalline boundary textures. Acta Mat 47 4 (1999) 1355-1369
8. Anand L. Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strains. Comp Meth Appl Mech Engng 193 48-51 (2004) 5359-5383
9. Watanabe O., Zbib H.M., and Takenouchi E. Crystal plasticity: microshear banding in polycrystal using Voronoi tessellation. Int J of Plasticity 14 8 (1998) 771-788
10. Barbe F., Decker L., Jeulin D., and Cailletaud G. Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: FE model. Int J of Plasticity 17 4 (2001) 513-536
11. Barbe F., Forest S., and Cailletaud G. Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results. Int J of Plasticity 17 4 (2001) 537-563
12. Diard O., Leclercq S., Rousselier G., and Cailletaud G. Evaluation of finite element based analysis of 3d multicrystalline aggregates plasticity: Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries. Int J of Plasticity 21 4 (2005) 691-722
13. Bugat S., Besson J., and Pineau A. Micromechanical modeling of the behavior of duplex stainless steels. Computational Materials Science 16 1-4 (1999) 158-166
14. Evers L.P., Parks D.M., Brekelmans W.A.M., and Geers M.G.D. Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation. J Mech Phys Sol 50 11 (2002) 2403-2424
15. Kim D.J., Ku T.W., and Kang B.S. Finite element analysis of micro-rolling using grain and grain boundary elements. J of Materials Processing Technology 130-131 (2002) 456-461
16. Cailletaud G., Diard O., and Musienko A. Damage, opening and sliding of grain boundaries. In: Ahzi S., et al. (Ed). Multiscale Modelling of Engng. Materials, Marrakech, Oct. 2002 (2002), Klüwer 149-156
17. Osipov N, Gourgues-Lorenzon A-F, Cailletaud G, Diard O, Marini B. Generation and study of bainitic microstructures. In Matériaux 2006, Dijon, France, 13-17 novembre 2006.
18. Teodosiu C., Raphanel J.L., and Tabourot L. Finite element simulation of the large elastoplastic deformation of multicrystals. In: Teodosiu C., Raphanel J.-L., and Sidoroff F. (Eds). 5th MECAMAT Int. seminar on Large Plastic Deformations: Fundamental Aspects and Applications to Metal Forming, Fontainebleau, France. MECAMAT'91 (1993), A.A. Balkema 153-168
19. Delaire F., Raphanel J.L., and Rey C. Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations. Acta Mat 48 5 (2000) 1075-1087
20. Becker R., and Panchanadeeswaran S. Effect of grain interactions on deformation and local texture in polycrystals. Acta Metall et Mat 43 7 (1995) 2701-2719
21. Bhattacharyya A., El-Danaf E., Kalidindi S.R., and Doherty R.D. Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: Oim measurements and numerical simulations. Int J of Plasticity 17 6 (2001) 861-883
22. Raabe D., Sachtleber M., Zhao Z., Roters F., and Zaefferer S. Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation. Acta Mat 49 17 (2001) 3433-3441
23. Sachtleber M., Zhao Z., and Raabe D. Experimental investigation of plastic grain interaction. Material Science and Engineering A 336 1-2 (2002) 81-87
24. Erieau P., and Rey C. Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression. Int J of Plasticity 20 10 (2004) 1763-1788
25. Eberl F., Forest S., Wroblewski T., Cailletaud G., and Lebrun J.-L. Finite element calculations of the lattice rotation field of a tensile loaded nickel base alloy multicrystal and comparison to topographical x-ray diffraction measurements. Metallurgical and Materials Transactions A33 (2002) 2825-2833
26. Hashimoto K., and Margolin H. The role of elastic interaction stresses on the onset of slip in polycrystalline alpha brass - I. Experimental determination of operating slip systems and qualitative analysis. Acta Metall 31 5 (1983) 773-785
27. Hashimoto K., and Margolin H. The role of elastic interaction stresses on the onset of slip in polycrystalline alpha brass - II. Rationalization of slip behavior. Acta Metall 31 5 (1983) 787-800
28. Man J., Obrtlik K., Blochwitz C., and Polak J. Atomic force microscopy of surface relief in individual grains of fatigued 316l austenitic stainless steel. Acta Mat 50 15 (2002) 3767-3780
29. Zeghadi A., N'Guyen F., Forest S., and Gourgues A.-F. Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained free surface microstructure-Part 2: Crystal plasticity. Philosophical Magasine 87 8-9 (2007) 1425-1446
30. Lewis A.C., and Geltmacher A.B. Image-based modeling of the response of experimental 3d microstructures to mechanical loading. ScriptaMat 55 1 (2006) 81-85
31. Lewis A.C., Bingert J.F., Rowenhorst D.J., Gupta A., Geltmacher A.B., and Spanos G. Two- and three-dimensional microstructural characterization of a super-austenitic stainless steel. Material Science and Engineering A 418 1-2 (2006) 11-18
32. Rey C. Comparaisons entre résultats de calcul par éléments finis et mesures de champs en plasticité cristalline. In Mecamat Conf. "Approches multi-échelles en mécanique des matériaux", Aussois, France, 23-27 jan 2006.
33. Tatschl A., and Kolednik O. On the experimental characterization of crystal plasticity in polycrystals. Material Science and Engineering A364 (2004) 384-399
34. Méric L., Poubanne P., and Cailletaud G. Single crystal modeling for structural calculations. Part 1: Model presentation. J of Engng Mat Technol 113 (1991) 162-170
35. Méric L., Cailletaud G., and Gaspérini M. FE calculations of copper bicrystal specimens submitted to tension-compression tests. Acta Metall et Mat 42 3 (1994) 921-935
36. Tatschl A., and Kolednik O. A new tool for the experimental characterization of micro-plasticity. Material Science and Engineering A339 1-2 (2003) 265-280
37. Cailletaud G. A micromechanical approach to inelastic behaviour of metals. Int J of Plasticity 8 1 (1992) 55-73
38. Cailletaud G, Chaboche J-L, Forest S, Rémy L. On the design of single crystal turbine blades. Revue de Métallurgie, février:2003;165-72.
39. Mandel J. Equations constitutives et directeurs dans les milieux plastiques et viscoplastiques. Int J Solids Structures 9 6 (1973) 725-740
40. Lemaitre J, Chaboche J-L. Mécanique des matériaux solides. Dunod, Paris: 1985.
41. Berveiller M., and Zaoui A. An extension of the self-consistent scheme to plastically-flowing polycrystal. J Mech Phys Sol 26 5-6 (1978) 325-344
42. Kalidindi S.R., and Anand L. Macroscopic shape change and evolution of crystallographic tecture in pre-textured fcc metals. J Mech Phys Sol 42 3 (1994) 459-490
43. Kocks U.F., and Brown T.J. Latent hardening in aluminum. Acta Metall 14 2 (1966) 87-98
44. Franciosi P. The concepts of latent hardening and strain hardening in metallic single crystals. Acta Metall 33 9 (1985) 1601-1612
45. Méric L., and Cailletaud G. Single crystal modeling for structural calculations. Part 2: Finite element implementation. J of Engng Mat Technol 113 (1991) 171-182
46. Devincre B., Kubin L., and Hoc T. Physical analyses of crystal plasticity by dd simulations. Scripta Mat 54 5 (2006) 741-746
47. Héripré E. Méthode de couplage multi-échelles entre simulations numériques polycristallines et mesures de champs pour l'identification des paramètres de loi de comportement et de fissuration des matériaux métalliques - Application à l'étude des alliages TiAl. PhD thesis, Ecole Polytechnique, 2006.