Measuring Nanomaterial Release from Carbon Nanotube Composites: Review of the State of the Science

Journal of Physics: Conference Series

Volumn 617, Issue 1, 2015, Pages

  Harper, Stacey ^a   Wohlleben, Wendel ^b   Doa, Maria ^c   Nowack, Bernd ^d   Clancy, Shaun ^e   Canady, Richard ^f   Maynard, Andrew ^g  

^a Oregon State University   (United States)

^b BASF SE   (Germany)

^c U S ENVIRONMENTAL PROTECTION AGENCY   (United States)

^d SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^e Evonik Degussa Corporation   (United States)

^f International Life Sciences Institute   (United States)

^g UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON; CARBON NANOTUBES; MULTIWALLED CARBON NANOTUBES (MWCN); NANOCOMPOSITES; NANOSTRUCTURED MATERIALS; NANOTUBES; RISK ASSESSMENT; YARN;

CARBON-NANOTUBE COMPOSITES; DOSE ASSESSMENTS; EXPERT ANALYSIS; LIFE CYCLE STAGES; MEASUREMENT METHODS; NANOMATERIAL RELEASE; REALISTIC EXPOSURE SCENARIO; RISK EVALUATION;

LIFE CYCLE;

EID: 84958640382     PISSN: 17426588     EISSN: 17426596     Source Type: Conference Proceeding    
DOI: 10.1088/1742-6596/617/1/012026     Document Type: Conference Paper

References (93)

1. Froggett S. J., Clancy S. F., Boverhof D. R. and Canady R. A. 2014 A review and perspective of existing research on the release of nanomaterials from solid nanocomposites Part Fibre Toxicol 11 17
2. International Life Sciences Institute ILSI Research Foundation NanoRelease Consumer Products http://www.ilsi.org/ResearchFoundation/RSIA/pages/NanoRelease1.aspx (accessed August 10, 2013)
3. Nowack B., David R. M., Fissan H., Morris H., Shatkin J. A., Stintz M., Zepp R. and Brouwer D. 2013 Potential release scenarios for carbon nanotubes used in composites Environ. Int. 59 1
4. Kingston C., Zepp R., Andrady A., Boverhof D., Fehir R., Hawkins D., Roberts J., Sayre ; Shelton P. B. and Sultan Y. 2014 Release characteristics of selected carbon nanotube polymer composites Carbon 68 33-57
5. Kuhlbusch T. A., Asbach C., Fissan H., Gohler D. and Stintz M. 2011 Nanoparticle exposure at nanotechnology workplaces: a review Part. Fibre. Toxicol 8 22
6. Petersen E. J., Zhang L., Mattison N. T., O'Carroll D. M., Whelton A. J., Uddin N., Nguyen T., Huang Q., Henry T. B. and Holbrook R. D. 2011 Potential release pathways, environmental fate, and ecological risks of carbon nanotubes Environ. Sci. Technol. 45 9837-9856
7. Hirth S., Cena L., Cox G., Tomovic Z., Peters T. and Wohlleben W. 2013 Scenarios and methods that induce protruding or released CNTs after degradation of nanocomposite materials J. Nanopart. Res. 15 1-15
8. Wohlleben W., Brill S., Meier M. W., Mertler M., Cox G., Hirth S., von Vacano B., Strauss V., Treumann S. and Wiench K. 2011 On the lifecycle of nanocomposites: comparing released fragments and their in-vivo hazards from three release mechanisms and four nanocomposites Small 7 2384-2395
9. Wohlleben W., Meier M. W., Vogel S., Landsiedel R., Cox G., Hirth S. and Tomovic Z. 2013 Elastic CNT-polyurethane nanocomposite: synthesis, performance and assessment of fragments released during use Nanoscale 5 369-380
10. David R. M. 2013 Measuring engineered nanomaterials in the environment: a consortium view of how to address the problem Environ. Eng. Sci. 30 97-100
11. McLeod D. Nanotechnology's many unknowns raise risk management and liability concerns: environmental damage, bodily injury claims could materialize www.businessinsurance.com/ article/20130224/NEWS07/302249985# (accessed September 26, 2013)
12. Sargent J. F. J. 2011 Nanotechnology and Environmental, Health, and Safety: Issues for Consideration (Washington, DC: Congressional Research Service)
13. US Government Accountability Office 2010 Nanotechnology: Nanomaterials Are Widely Used in Commerce but EPA Faces Challenges in Regulating Risk GAO-10-549 (Washington, DC: U.S. Government Accountability Office)
14. Nowack B., Ranville J. F., Diamond S., Gallego-Urrea J. A., Metcalfe C., Rose J., Horne N., Koelmans A. A. and Klaine S. J. 2012 Potential scenarios for nanomaterial release and subsequent alteration in the environment Environ. Toxicol. Chem. 31 50-59
15. Westerhoff P. and Nowack B. 2013 Searching for global descriptors of engineered nanomaterial fate and transport in the environment Acc. Chem. Res. 46 844-853
16. Burello E. and Worth A. P. 2011 QSAR modeling of nanomaterials Wiley. Interdiscip. Rev. Nanomed. Nanobiotechnol. 3 298-306
17. Sun B., Li R., Wang X. and Xia T. 2013 Predictive toxicological paradigm and high throughput approach for toxicity screening of engineered nanomaterials Int. J. Biomed. Nanosci. Nanotechnol 3 4-18
18. International Council on Nanotechnology Nano-EHS Database Analysis Tool http://icon.rice.edu/report.cfm (accessed August 6, 2013)
19. Schnorr J. M. and Swager T. M. 2010 Emerging applications of carbon nanotubes Chem. Mater. 23 646-657
20. Terrones M. 2003 Science and technology of the twenty-first century: synthesis, properties, and applications of carbon nanotubes Annu. Rev. Mater. Res. 33 419-501
21. Nanoposts.com The global market for carbon nanotubes to 2015: A realistic assessment http://www.Nanoposts.com (accessed July 2013)
22. Andrews R. and Weisenberger M. C. 2004 Carbon nanotube polymer composites Curr. Opin. Sol. State Mat. Sci. 8 31-37
23. Baughman R. H., Zakhidov A. A. and de Heer W. A. 2002 Carbon nanotubes-the route toward applications Science 297 787-792
24. Breuer O. and Sundararaj U. 2004 Big returns from small fibers: a review of polymer/carbon nanotube composites Polym. Compos. 25 630-645
25. Coleman J. N., Khan U., Blau W. J. and Gun'ko Y. K. 2006 Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites Carbon 44 1624-1652
26. Coleman J. N., Khan U. and Gun'ko Y. K. 2006 Mechanical reinforcement of polymers using carbon nanotubes Adv. Mater. 18 689-706
27. Endo M., Strano M. S. and Ajayan P. M. 2008 Potential applications of carbon nanotubes Top. Appl. Phys. 111 13-61
28. Harris P. J. F. 2004 Carbon nanotube composites Int. Mater. Rev. 49 31-43
29. Wick P., Clift M. J., Rosslein M. and Rothen-Rutishauser B. 2011 A brief summary of carbon nanotubes science and technology: a health and safety perspective ChemSusChem 4 905911
30. Clark K., Tongeren M., Christensen F., Brouwer D., Nowack B, Gottschalk F., Micheletti C., Schmid K., Gerritsen R. and Aitken R. 2012 Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices J. Nanopart. Res. 14 1-14
31. Rillig M. C. 2012 Microplastic in terrestrial ecosystems and the soil? Environ. Sci. Technol. 46 6453-6454
32. von Moos N., Burkhardt-Holm P. and Kohler A 2012 Uptake and effects of microplastics on cells and tissue of the blue mussel Mytilus edulis L. after an experimental exposure Environ. Sci. Technol. 46 11327-11335
33. Jones-Otazo H. A., Clarke J. P., Diamond M. L., Archbold J. A., Ferguson G., Hamer T., Richardson G. M., Ryan J. J. and Wilford B 2005 Is house dust the missing exposure pathway for PBDEs? An analysis of the urban fate and human exposure to PBDEs Environ. Sci. Technol. 39 5121-5130
34. Webster T. F., Harrad S., Millette J. R., Holbrook R. D., Davis J. M., Stapleton H. M., Allen J. G., McClean M. D., Ibarra C. and Abdallah M. A.-E. 2009 Identifying transfer mechanisms and sources of decabromodiphenyl ether (BDE 209) in indoor environments using environmental forensic microscopy Environ. Sci. Technol. 43 3067-3072
35. Institute of Nanotechnology The world market for nanocomposites http://www.nano.org.uk/nanotechnology-reports/132 (accessed August 10, 2013)
36. Nguyen T., Pellegrin B., Bernard C., Gu X., Gorham J. M., Stutzman P., Stanley D., Shapiro A., Byrd E. and Hettenhouser R. 2011 Fate of nanoparticles during life cycle of polymer nanocomposites J. Phys. Conf. Ser. 304 012060
37. Nguyen T., Pelligrin B., Mermet L., Gu X., Shapiro A., Chin J. and Reichert T. 2009 Degradation and nanofiller release of polymer nanocomposites exposed to ultraviolet radiation Nat. Artif. Ageing Polym. 149-162
38. Nguyen T., Pelligrin B., Mermet L., Shapiro A., Gu X. and Chin J. 2009 Network aggregation of CNTs at the surface of epoxy/MWCNT composite exposed to UV radiation Nanotechnology 2009: Fabrication, Particles, Characterization, MEMS, Elec tronics and Phototonics 1 (TX: CRC Press, Nano Science and Technology Institute Houston) 90-93
39. Asmatulu R., Mahmud G. A., Hille C. and Misak H. E. 2011 Effects of UV degradation on surface hydrophobicity, crack, and thickness of MWCNT-based nanocomposite coatings Prog. Org. Coat. 72 553-561
40. Busquets-Fite M., Fernandez E., Janer G., Vilar G., Vazquez-Campos S., Zanasca R., Citterio C., Mercante L. and Puntes V. 2013 Exploring release and recovery of nanomaterials from commercial polymeric nanocomposites J. Phys. Conf. Ser. 429 012048
41. Uddin N. M. and Nyden M. R. 2011 Characterization of nanoparticle release from polymer nanocomposites due to fire Nanotechnology 2011: Advances Materials, CNTs, Particles, Films and Composites (DanvilleCA: Nano Science Technology Institute) 523-526
42. Liu X., Hurt R. H. and Kane A. B. 2010 Biodurability of single-walled carbon nanotubes depends on surface functionalization 48 1961-1969
43. Liu T. and Guo S. 2010 Properties of polyurethane/carbon nanotube nanocomposites Polymer Nanotube Nanocomposites: Synthesis, Properties and Applications (SalemMA: Scrivener) 141-176
44. Kagan V. E., Konduru N. V., Feng W., Allen B. L., Conroy J., Volkov Y., Vlasova II, Belikova N. A., Yanamala N. and Kapralov A. 2010 Carbon nanotubes degraded by neutrophil myeloperoxidase induce less pulmonary inflammation Nat Nanotechnol 5 354-359
45. Ashter A., Tsai S. J., Lee J. S., Ellenbecker M. J., Mead J. L. and Barry C. F. 2010 Effects of nanoparticle feed location during nanocomposite compounding Polymer Engineering & Science 50 154-164
46. Tsai S. J., Ashter A., Ada E., Mead J. L., Barry C. F. and Ellenbecker M. J. 2008 Airborne nanoparticle release associated with the compounding of nanocomposites using nanoalumina as fillers Aerosol Air Qual Res 8 160-177
47. Bello D., Wardle B. L., Zhang J., Yamamoto N., Santeufemio C., Hallock M. and Virji M. A. 2010 Characterization of exposures to nanoscale particles and fibers during solid core drilling of hybrid carbon nanotube advanced composites Int. J. Occup. Environ. Health. 16 434-450
48. Bello D., Wardle B., Yamamoto N., Guzman deVilloria R., Garcia E., Hart A., Ahn K., Ellenbecker M. and Hallock M. 2009 Exposure to nanoscale particles and fibers during machining of hybrid advanced composites containing carbon nanotubes J. Nanopart. Res. 11 231-249
49. Raynor P. C., Cebula J. I., Spangenberger J. S., Olson B. A., Dasch J. M. and D'Arcy J. B. 2012 Assessing potential nanoparticle release during nanocomposite shredding using direct-reading instruments J. Occup. Environ. Hyg. 9 1-13
50. Gohler D., Stintz M., Hillemann L. and Vorbau M. 2010 Characterization of nanoparticle release from surface coatings by the simulation of a sanding process Ann. Occup. Hyg. 54 615-624
51. Koponen I. K., Jensen K. A. and Schneider T. 2011 Comparison of dust released from sanding conventional and nanoparticle-doped wall and wood coatings J Expo Sci Environ Epidemiol 21 408-418
52. Saber A. T., Jacobsen N. R., Mortensen A., Szarek J., Jackson P., Madsen A. M., Jensen K. A., Koponen I. K., Brunborg G. and Gutzkow K. B. 2012 Nanotitanium dioxide toxicity in mouse lung is reduced in sanding dust from paint Part Fibre Toxicol 9 4
53. Cena L. G. and Peters T. M. 2011 Characterization and control of airborne particles emitted during production of epoxy/carbon nanotube nanocomposites J. Occup. Environ. Hyg. 8 86-92
54. Huang G., Park J., Cena L., Shelton B. and Peters T. 2012 Evaluation of airborne particle emissions from commercial products containing carbon nanotubes J. Nanopart. Res. 14 1-13
55. Golanski L., Guiot A., Pras M., Malarde M. and Tardif F. 2012 Release-ability of nano fillers from different nanomaterials (toward the acceptability of nanoproduct) J. Nanopart. Res. 14 19
56. Kohler A. R., Som C., Helland A. and Gottschalk F. 2008 Studying the potential release of carbon nanotubes throughout the application life cycle J Clean Prod 16 927-937
57. Som C., Berges M., Chaudhry Q., Dusinska M., Fernandes T. F., Olsen S. I. and Nowack B. 2010 The importance of life cycle concepts for the development of safe nanoproducts Toxicology 269 160-169
58. Upadhyayula V. K. K., Meyer D. E., Curran M. A. and Gonzalez M. A. 2012 Life cycle assessment as a tool to enhance the environmental performance of carbon nanotube products: a review J. Cleaner Prod. 26 37-47
59. Tsai S.-J., Hofmann M., Hallock M., Ada E., Kong J. and Ellenbecker M. 2009 Characterization and evaluation of nanoparticle release during the synthesis of single-walled and multiwalled carbon nanotubes by chemical vapor deposition Environ. Sci. Technol. 43 6017-6023
60. Yeganeh B., Kull C. M., Hull M. S. and Marr L. C. 2008 Characterization of airborne particles during production of carbonaceous nanomaterials Environ. Sci. Technol. 42 4600-4606
61. Fleury D., Bomfim J. A. S., Vignes A., Girard C., Metz S., Munoz F., R'Mili B., Ustache A., Guiot A. and Bouillard J. X. 2013 Identification of the main exposure scenarios in the production of CNT-polymer nanocomposites by melt-moulding process J. Cleaner Prod. 53 22-36
62. Koponen I. K., Jensen K. A. and Schneider T. 2010 Comparison of dust released from sanding conventional and nanoparticle-doped wall and wood coatings J. Exposure Sci. Environ. Epidemiol. 21 408-418
63. Le Bihan O., Shandilya N., Gheerardyn L., Guillon O., Dore E. and Morgeneyer M. 2013 Investigation of the release of particles from a nanocoated product Adv. Nanopart. 2 39-44
64. Gohler D., Nogowski A., Fiala P. and Stintz M. 2013 Nanoparticle release from nanocomposites due to mechanical treatment at two stages of the life-cycle J. Phys. Conf Ser. 429 012045
65. Schlagenhauf L., Chu B. T., Buha J., Nuesch F. and Wang J. 2012 Release of carbon nanotubes from an epoxy-based nanocomposite during an abrasion process Environ. Sci. Technol. 46 7366-7372
66. Bouillard J., R'Mili B., Moranviller D., Vignes A., Le Bihan O., Ustache A., Bomfim J. S., Frejafon E. and Fleury D. 2013 Nanosafety by design: risks from nanocomposite/nanowaste combustion J. Nanopart. Res. 15 1-11
67. Mansfield E., Kar A. and Hooker S. A. 2010 Applications of TGA in quality control of SWCNTs Anal. Bioanal. Chem. 396 1071-1077
68. Walser T., Limbach L. K., Brogioli R., Erismann E., Flamigni L., Hattendorf B., Juchli M., Krumeich F., Ludwig C. and Prikopsky K. 2012 Persistence of engineered nanoparticles in a municipal solid-waste incineration plant Nat. Nanotechnol. 7 520-524
69. Mueller N. C., Buha J., Wang J., Ulrich A. and Nowack B. 2013 Modeling the flows of engineered nanomaterials during waste handling Environ. Sci. Process Impact 15 251-259
70. Bouillard J. X., Vignes A. and Rmili B. 2010 In Nanowastes: risk assessment from the end-of-life combustion of nanomaterials Grenoble, France, International Conference on Safe Production and Use of Nanomaterials (NANOSAFE) (GrenobleFrance,)
71. Dahm M. M., Evans D. E., Schubauer-Berigan M. K., Birch M. E. and Deddens J. A. 2013 Occupational exposure assessment in carbon nanotube and nanofiber primary and secondary manufacturers: mobile direct-reading sampling Ann. Occup. Hyg. 57 328-344
72. Golanski L., Guiot A. and Tardif F. 2010 New method for the characterization of abrasion-induced nanoparticle release into air from nanomaterials Nanotechnology 2010: Advanced Materials, CNTs, Particles, Films and Composites 720-723
73. Gupta A., Gaspar D., Yost M., Gross G., Rempes P., Clark M. and Martin J. 2006 Evaluating the potential for release of carbon nanotubes and subsequent occupational exposure during processing of a nanocomposite 110-111
74. Hellmann A., Schmidt K., Ripperger S. and Berges M. 2012 Freisetzung ultrafeiner Staube bei der mechanischen Bearbeitung von Nanokompositen: Release of ultrafine dusts during the machining of nanocomposites Gefahrstoffe-Reinhaltung der Luft 72 473
75. Meng H., Sui G. X., Xie G. Y. and Yang R. 2009 Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition Compos. Sci. Technol. 69 606-611
76. Methner M., Crawford C. and Geraci C. 2012 Evaluation of the potential airborne release of carbon nanofibers during the preparation, grinding, and cutting of epoxy-based nanocomposite material J. Occup. Environ. Hyg. 9 308-318
77. Nguyen T 2012 Quantitative studies of photo-induced surface accumulation and release of nanoparticles in polymer nanocomposites (GrenobleFrance: Nanosafe)
78. Ogura I., Kotake M., Shigeta M., Uejima M., Saito K., Hashimoto N. and Kishimoto A. 2013 Potential release of carbon nanotubes from their composites during grinding J. Phys. Conf. Ser. 429 012049
79. Ono-Ogasawara M. and Myojo T. 2011 A proposal of method for evaluating airborne MWCNT concentration Ind. Health 49 726-734
80. Orhan T., Isitman N. A., Hacaloglu J. and Kaynak C. 2012 Thermal degradation of organophosphorus flame-retardant poly(methyl methacrylate) nanocomposites containing nanoclay and carbon nanotubes Polym. Degrad. Stab. 97 273-280
81. Schutz J. A. and Morris H. 2013 Investigating the Emissions of Nanomaterials from Composites and Other Solid Articles during Machining Processes (ClaytonSouth VictoriaAustralia,)
82. Scott K., Marvel C., Stranick S. and Scott J. H June 19, 2012 In Microscopy-based detection and analysis of carbon nanomaterials in commercially available baseball bats Nanotech Conference and Expo (Santa ClaraCASanta ClaraCA,)
83. Coleman J. N., Khan U., Blau W. J. and Gun'ko Y. K. 2006 Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites Carbon 44 1624-1652
84. Lachman N. and Daniel Wagner H. 2010 Correlation between interfacial molecular structure and mechanics in CNT/epoxy nano-composites Composites, Part A 41 1093-1098
85. Bernard C., Nguyen T., Pellegrin B., Holbrook R. D., Zhao M. and Chin J. 2011 Fate of graphene in polymer nanocomposite exposed to UV radiation J. Phys. Conf. Ser. 304 012063
86. Kaegi R., Ulrich A., Sinnet B., Vonbank R., Wichser A., Zuleeg S., Simmler H., Brunner S., Vonmont H. and Burkhardt M. 2008 Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment Environ. Pollut. 156 233-239
87. NIOSH 2013 Occupational Exposure to Carbon Nanotubes and Nanofibers (CincinnatiOH: National Institute for Occupational Health and Safety)
88. Pauluhn J. 2010 Multi-walled carbon nanotubes (Baytubes®): Approach for derivation of occupational exposure limit Reg. Toxicol. Pharmacol. 57 78-89
89. Plata D. L., Ferguson P. L. and Westerhoff P. 2012 Express it in numbers: efforts to quantify engineered nanoparticles in environmental matrices advance Environ. Sci. Technol. 46 12243-12245
90. Plata D. L., Reddy C. M. and Gschwend P. M. 2012 Thermogravimetry-mass spectrometry for carbon nanotube detection in complex mixtures Environ. Sci. Technol. 46 12254-12261
91. Lehman J. H., Terrones M., Mansfield E., Hurst K. E. and Meunier V. 2011 Evaluating the characteristics of multiwall carbon nanotubes Carbon 49 2581-2602
92. Kaiser D. 2104 www.ilsi.org/ResearchFoundation/RSIA/Documents/Methods for Measuring Release of MWCNTs from polymer composites-monographversion.pdf
93. Saito R., Hofmann M., Dresselhaus G., Jorio A. and Dresselhaus M. S. 2011 Raman spectroscopy of graphene and carbon nanotubes Adv. Phys. 60 413-550