A review of mathematical inventory models for reverse logistics and the future of its modeling: An environmental perspective

Applied Mathematical Modelling

Volumn 40, Issue 5-6, 2016, Pages 4151-4178

  Bazan, Ehab ^a   Jaber, Mohamad Y ^a   Zanoni, Simone ^b  

^a RYERSON UNIVERSITY   (Canada)

^b UNIVERSITY OF BRESCIA   (Italy)

Author keywords

Energy consumption; Greenhouse gas (GHG) emissions; Inventory; Reverse logistics; Sustainability

Indexed keywords

DECISION MAKING; ENERGY UTILIZATION; GAS EMISSIONS; GREENHOUSE GASES; INVENTORY CONTROL; SUPPLY CHAINS; WASTE DISPOSAL;

DECISION MAKING PROCESS; ENVIRONMENTAL IMPLICATIONS; ENVIRONMENTAL ISSUES; INVENTORY; MODEL ASSUMPTIONS; PRODUCTION AND INVENTORY; REVERSE LOGISTICS; SUPPLY CHAIN MODELS;

SUSTAINABLE DEVELOPMENT;

EID: 84958152586     PISSN: 0307904X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apm.2015.11.027     Document Type: Article

References (266)

1. Schrady, D. A. (1967). A deterministic inventory model for reparable items. Naval Research Logistics Quarterly, 14(3), 391-398.
2. Freiheit, J. E. (1967). A continuous review model for the reparable item inventory system. Master's Thesis, Naval Postgraduate School, Monterey, CA, USA. (http://calhoun.nps.edu/bitstream/handle/10945/11854/continuousreview00frei.pdf?sequence=l).
3. Dollard, P. A. (1967). A periodic reparable-item inventory model. Master's Thesis, Naval Postgraduate School, Monterey, CA, USA. (http://calhoun.nps.edu/bitstream/handle/10945/12815/periodicreparabl00doll.pdf?sequence=l).
4. Allen, S. G., & D'Esopo, D. A. (1968). An ordering policy for repairable stock items. Operations Research, 16(3), 669-674.
5. Brown Jr, G. F., Corcoran, T. M., & Lloyd, R. M. (1969). A dynamic inventory model with delivery lag and repair. Center for Naval Analysis, Arlington, VA, USA.
6. Simpson, V. P. (1970). An ordering model for recoverable stock items. AIIE Transactions, 2(4), 315-320.
7. Brown Jr, G. F., Corcoran, T. M., & Lloyd, R. M. (1970). Inventory models with a type of dependent demand and forecasting, with an application to repair. Center for Naval Analysis, Arlington, VA, USA.
8. Simon, R. M. (1971). Stationary properties of a two-echelon inventory model for low demand items. Operations Research, 19(3), 761-773.
9. Brown Jr, G. F., Lloyd, R. M., & Corcoran, T. M. (1971). Inventory models with forecasting and dependent demand. Management Science, 17(7), 498-499.
10. Quirk, D. J. (1972). A probabilistic event-step computer simulation of a repairable item inventory system. Master's Thesis, Naval Postgraduate School, Monterey, CA, USA. (http://calhoun.nps.edu/handle/10945/16313).
11. Meyer, F. L. (1973). Analysis of the United States Navy Uniform Inventory Control Program and a proposed repair/procurement interface model. Master's Thesis, Naval Postgraduate School, Monterey, CA, USA. (http://calhoun.nps.edu/bitstream/handle/10945/16475/analysisofunitedOOmeye.pdf?sequence=l).
12. Haber, S. E., & Sitgreaves, R. (1975). An optimal inventory model for the intermediate echelon when repair is possible. Management Science, 21(6), 638-648.
13. Richards, F. R. (1976). A stochastic model of a repairable-item inventory system with attrition and random lead times. Operations Research, 24(1), 118-130.
14. Shanker, K. (1977). An Analysis of a Two-Echelon Inventory System for Recoverable Items (No. TR-341). School of Operations Research and Industrial Engineering, Cornell University, Ithaca, NY, USA. (http://www.dtic.mil/cgi-bin/GetTRDoc?Location=U2&doc=GetTRDoc.pdf8zAD=ADA043007).
15. Simpson, V. P. (1978). Optimum solution structure for a repairable inventory problem. Operations Research, 26(2), 270-281.
16. Nahmias, S., & Rivera, H. (1979). A deterministic model for a repairable item inventory system with a finite repair ratet. International Journal of Production Research, 17(3), 215-221.
17. Sherif, Y. S. (1982). Optimal maintenance schedules of systems subject to stochastic failure. Microelectronics Reliability, 22(1), 15-29.
18. Azoury, K. S. (1985). Baycs solution to dynamic inventory models under unknown demand distribution. Management Science, 31(9), 1150-1160.
19. Matta, K. F. (1985). A simulation model for repairable items/spare parts inventory systems. Computers & operations research, 12(4), 395-409.
20. Matta, K. F. (1986). Derivation of the cost equation of a dual replenishment inventory model with two order levels. Mathematical Modeling, 7(2), 273-284.
21. Albright, S. C., & Soni, A. (1988). Approximate steady-state distribution for a large repairable item inventory system. European Journal of Operational Research, 34(3), 351-361.
22. Park, B. G. (1988). Developing an inventory model for the Korean Air Force repairable item inventory. Master's Thesis, Naval Postgraduate School, Monterey, CA, USA. (https://archive.Org/stream/developinginvent00park#page/n7/mode/2up).
23. Lee, H. L., & Moinzadeh, K. (1989). A repairable item inventory system with diagnostic and repair service. European Journal of Operational Research, 40(2), 210-221.
24. Schaefer, M. K. (1989). Replenishment policies for inventories of recoverable items with attrition. Omega, 17(3), 281-287.
25. Kumar, A., & Biumberg, H. (1991). A probabilistic model for a repairable mining equipment inventory system and procurement policy determination. International Journal of Surface Mining, Reclamation and Environment, 5(3), 117-121.
26. Mabini, M. C., Pintelon, L. M., & Gelders, L. F. (1992). EOQ type formulations for controling repairable inventories. International Journal of Production Economics, 28(1), 21-33.
27. Chua, R. C., Scudder, G. D., & Hill, A. V. (1993). Batching policies for a repair shop with limited spares and finite capacity. European journal of operational research, 66(1), 135-147.
28. Richter, K. (1996). The EOQ repair and waste disposal model with variable setup numbers. European Journal of Operational Research, 95(2), 313-324.
29. Ashayeri, J., Heuts, R., Jansen, A., & Szczerba, B. (1996). Inventory management of repairable service parts for personal computers: A case study. International Journal of Operations & Production Management, 16(12), 74-97.
30. Dobos, I., & Richter, K. (2000). The integer EOQ repair and waste disposal model-further analysis. Central European Journal of Operations Research, 8(2).
31. Laan, E. A., & Teunter, R. H. (2000). Average Costs versus Net Present Value (No. ERS-2000-47-LIS). ERIM Report Series Research in Management.
32. Teunter, R. H. (2001). Economic ordering quantities for recoverable item inventory systems. Naval Research Logistics (NRL), 48(6), 484-495.
33. Teunter, R. H. (2001). A reverse logistics valuation method for inventory control. International Journal of Production Research, 39(9), 2023-2035.
34. Zhang, Y. (2001). Environmentally conscious supply chain, Master's Thesis, Texas Tech University, Lubbock, TX, USA. (https://repositories.tdl.org/ttu-ir/bitstream/handIe/2346/11060/31295017977819.pdf?sequence=l).
35. Cho, D. I. (2001). Optimal stationary policy for a repairable item inventory problem. Canadian Journal of Administrative Sciences/Revue Canadienne des Sciences de l'Administration, 18(2), 130-143.
36. Cho, D. I. (2001). An approximation to a dynamic inventory model for repairable items. International Journal of Systems Science, 32(7), 879-888.
37. Wojanowski, R., Seelmann-Eggebeit, R., & M. Schenk. (2001). Heuristics on reverse logistics. Proceedings of the 12th Annual Conference of the Production and Operations Management Society, 30 March-02 April, Orlando, Fl., USA.
38. Dobos, I., & Richter, K. (2001). A production/recycling model with stationary demand and return rates-Its title in Hungarian: Egy termelesi/ujrafelhasznalasi modell konstans keresleti es visszateresi rata mellett.
39. Fleischmann, M., Kuik, R., & Dekker, R. (2002). Controling inventories with stochastic item returns: A basic model. European journal of operational research, 138(1), 63-75.
40. Hu, T. L., Sheu, J. B., & Huang, K. H. (2002). A reverse logistics cost minimization model for the treatment of hazardous wastes. Transportation Research Part E: Logistics and Transportation Review, 38(6), 457-473.
41. Koh, S. G., Hwang, H., Sohn, K. I., & Ko, C. S. (2002). An optimal ordering and recovery policy for reusable items. Computers & Industrial Engineering, 43(1), 59-73.
42. Teunter, R. H., & Vlachos, D. (2002). On the necessity of a disposal option for returned items that can be remanufactured. International Journal of Production Economics, 75(3), 257-266.
43. Teunter, R. H. (2002). Economic order quantities for stochastic discounted cost inventory systems with remanufacturing. International Journal of Logistics, 5(2), 161-175.
44. Mabini, M. C., & Christer, A. H. (2002). Controling multi-indenture repairable inventories of multiple aircraft parts. Journal of the Operational Research Society, 53(12), 1297-1307.
45. Dobos, I. (2002). The generalization of Schrady's model: A model with repair-Its title in Hungarian: A Schardy-fele ujrafelhasznalas modell altalanosltasa.
46. Mahadevan, B., Pyke, D. F., & Fleischmann, M. (2003). Periodic review, push inventory policies for remanufacturing. European Journal of Operational Research, 151(3), 536-551.
47. Teunter, R. (2004). Lot-sizing for inventory systems with product recovery. Computers & Industrial Engineering, 46(3), 431-441.
48. Dobos, I., & Richter, K. (2004). An extended production/recycling model with stationary demand and return rates. International Journal of Production Economics, 90(3), 311-323.
49. Richter, K., & Dobos, I. (2004). Production-inventory control in an EOQ-type reverse logistics system. In Supply chain management and reverse logistics, pp. 139-160, Springer: Berlin, Heidelberg.
50. Pati, R. K., Vrat, P., & Kumar, P. (2004). Cost optimization model in recycled waste reverse logistics system. International Journal of Business Performance Management, 6(3), 245-261.
51. Hwang, H., Kim, Y. J., & Oh, Y. H. A deterministic production and inventory model for recycled material with Weibull deterioration. Journal of the Korean Society of Supply Chain Management, 7 (2), 91-98.
52. Koh, S. G., Hwang, H., Sohn, K. I., & Ko, C. S. (2002). An optimal ordering and recovery policy for reusable items. Computers & Industrial Engineering, 43(1), 59-73.
53. Sheu, J. B., Chou, Y. H., & Hu, C. C. (2005). An integrated logistics operational model for green-supply chain management. Transportation Research Part E: Logistics and Transportation Review, 41 (4), 287-313.
54. Inderfurth, K., Lindner, G., & Rachaniotis, N. P. (2005). Lot sizing in a production system with rework and product deterioration. International Journal of Production Research, 43(7), 1355-1374.
55. Hedjar, R., Bounkhel, M., & Tadj, L (2005). Receding horizon control of a hybrid production system with deteriorating items. Nonlinear Analysis: Theory, Methods & Applications, 63(3), 405-422.
56. Hwang, H, Kim, Y-J., & Ko, CS. (2005).Inventory level of recycled material for deteriorating items under LIFO policy. Proceedings of the 2005 International Conference on Simulation and Modeling, V. Kachitvichyanukul, U. Purintrapiban, & P. Utayopas, eds., pp. 1-5. (http://www.mssanz.org.au.previewdns.com/simmod05/papers/A2-04.pdf).
57. Hwang, H., Oh, Y. H., & Gen, M. (2007). An inventory policy for recycling system. In Proceedings of the 2005 International Conference on Simulation and Modeling, V. Kachitvichyanukul, U. Purintrapiban, & P. Utayopas, eds., pp. 17-19. (http://www.mssanz.org.au.previewdns.com/simmod05/papers/A3-04.pdf).
58. Dobos, I., & Richter, K. (2006). A production/recycling model with quality consideration. International Journal of Production Economics, 104(2), 571-579.
59. Tang, O., & Teunter, R. (2006). Economic lot scheduling problem with returns. Production and Operations Management, 15(4), 488-497.
60. van der Laan, E. A., & Teunter, R. H. (2006). Simple heuristics for push and pull remanufacturing policies. European Journal of Operational Research, 175(2), 1084-1102.
61. Konstantaras, I., & Papachristos, S. (2006). Lot-sizing for a single-product recovery system with backordering. International Journal of Production Research, 44(10), 2031-2045.
62. Oh, Y. H., & Hwang, H. (2006). Deterministic inventory model for recycling system. Journal of Intelligent Manufacturing, 17(4), 423-428.
63. Wee, H. M., Jonas, C. P., Su, L. H., &Wu, T. C. (2006). Optimal ordering and recovery policy for reusable items with shortages. In Simulated Evolution and Learning, pp. 284-291, Springer: Berlin, Heidelberg.
64. Oh, Y. (2006). Inventory control policies for reverse logistics. Doctoral Thesis, Korea Advanced Institute of Science and Technology, Daejeon, South Korea. (http://library.kaist.ac.kr/thesis02/2006/2006D000985819-S1Ver2.pdf).
65. Li, Y., Chen, J., & Cai, X. (2007). Heuristic genetic algorithm for capacitated production planning problems with batch processing and remanufacturing. International Journal of Production Economics, 105(2), 301-317.
66. Buscher, U., & Lindner, G. (2007). Optimizing a production system with rework and equal sized batch shipments. Computers & Operations Research, 34(2), 515-535.
67. Choi, D.W., Hwang, H., & Koh, S. G. (2007). A generalized ordering and recovery policy for reusable items. European Journal of Operational Research, 182(2), 764-774.
68. Konstantaras, I., & Papachristos, S. (2007). Optimal policy and holding cost stability regions in a periodic review inventory system with manufacturing and remanufacturing options. European Journal of Operational Research, 178(2), 433-448.
69. Khawam, J., Hausman, W. H., & Cheng, D.W. (2007). Warranty inventory optimization for Hitachi global storage technologies, Inc. Interfaces, 37(5), 455-471.
70. Teng, H. M., Wee, H. M., & Hsu, P. H. (2007). Optimal recycling and ordering policy with partial backordered shortage. In Computational Science and Its Applications-ICCSA 2007, pp. 871-885, Lecture Notes in Computer Science, Vol. 4705, Springer: Berlin, Heidelberg.
71. Guo, F., & Zhang, T. (2007). The optimized inventory control based on disposing reverse logistics in set volume with the franchisers' assistance. First International Conference on Transportation Engineering, July 22-24, pp. 558-563, Chengdu, China.
72. Elsayed, M., M., A. (2007). Optimal control of some multi-item dynamical inventory models with deteriorating items. Master's Thesis, King Saud University, Riyadh, Kingdom of Saud Arabia. (http://hdl.handle.net/123456789/8781).
73. Kaifu, Y. U. A. N., & Yang, G. A. O. EOQ models in hybrid system with goods shortage permission (http://www.seiofbluemountain.com/upload/product/200910/2007glhy15a5.pdf).
74. Chung, C. J., &Wee, H. M. (2008). Green-component life-cycle value on design and reverse manufacturing in semi-closed supply chain. International Journal of Production Economics, 113(2), 528-545.
75. Chung, S. L., Wee, H. M., & Yang, P. C. (2008). Optimal policy for a closed-loop supply chain inventory system with remanufacturing. Mathematical and Computer Modeling, 48(5), 867-881.
76. Rubio, S., & Corominas, A. (2008). Optimal manufacturing-remanufacturing policies in a lean production environment. Computers & Industrial Engineering, 55(1), 234-242.
77. Jaber, M. Y., & Rosen, M. A. (2008). The economic order quantity repair and waste disposal model with entropy cost. European Journal of Operational Research, 188(1), 109-120.
78. El Saadany, A., & Jaber, M. Y. (2008). The EOQ repair and waste disposal model with switching costs. Computers & Industrial Engineering, 55(1), 219-233.
79. Qiaolun, G., Jianhua, J., & Tiegang, G. (2008). Pricing management for a closed-loop supply chain. Journal of Revenue & Pricing Management, 7(1), 45-60.
80. Gu, Q. L., & Ji, J. H. (2008). An integrated logistics operational model for remanufacturing/manufacturing system based on the consumer market. International Journal of Logistics Systems and Management, 4(1), 21-39.
81. Bu, X., & Xu, S. (2008). The profit model in reverse logistics under the different environment factors. IEEE International Conference on Service Operations and Logistics, and Informatics (IEEE/SOLI 2008), 12-15 October, Vol. 1, pp. 1215-1220, Beijing, China.
82. Chung, C. J., Quaddus, M., &Wee, H. M. (2008). Optimizing replenishment policy for short-life-cycle product with recovery considering uncertain delivery. 2008 International Conference on Machine Learning and Cybernetics, 12-15 July, Vol. 7, pp. 3952-3957, Kunming, China.
83. Nagar, P., & Srivastava, S. (2008). Inventory level of recycled material for deteriorating items under Lifo policy1. Journal of the Applied Mathematics, Statistics and Informatics, 4(1), 5-15.
84. Schulz, T., & Ferretti, I. (2011). On the alignment of lot sizing decisions in a remanufacturing system in the presence of random yield. Journal of Remanufacturing, 1(1), 1-11.
85. Li, C., Yang, X., & Zhang, Z. (2008). An extended EOQ model in production-recycling system. 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM'08) 12-14 October, pp. 1-5, Dalian, China.
86. Yuan, K., & Gao, Y. (2008, October). Lot-Size Model for a Recovery System with Backordering and Disposal. 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM'08), 12-14 October, pp. 1-4, Dalian, China.
87. Yuan, K., & Gao, Y. (2008). Manufacturing and remanufacturing lot-Size model with backordering and disposal. 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM'08), 12-14 October, pp. 1-4, Dalian, China.
88. Fan, W., Ru, Y., Wang, Y., & Yao, C. (2008). Stochastic inventory control model with manufacturing and remanufacturing hybrid system. IEEE International Conference on Service Operations and Logistics, and Informatics (IEEE/SOLI), 12-15 October, Vol. 1, pp. 1268-1271, Beijing, China.
89. Srivastava, S., & Sharma, N. (2008). FIFO Controller Design Technique in JPEG 2000 Encoder UsingWeibull Distribution. Proceedings ofWorld Academy of Science: Engineering & Technology, 47.
90. Jaber, M. Y., & El Saadany, A. (2009). The production, remanufacture and waste disposal model with lost sales. International Journal of Production Economics, 120(1), 115-124.
91. Liu, N., Kim, Y., & Hwang, H. (2009). An optimal operating policy for the production system with rework. Computers & Industrial Engineering, 56(3), 874-887.
92. Wee, H. M., & Chung c, C. J. (2009). Optimizing replenishment policy for an integrated production inventory deteriorating model considering green component-value design and remanufacturing. International Journal of Production Research, 47(5), 1343-1368.
93. Van Kooten, J. P., & Tan, T. (2009). The final order problem for repairable spare parts under condemnation. Journal of the Operational Research Society, 60(10), 1449-1461.
94. Omar, M., & Yeo, I. (2009). A model for a production-repair system under a time-varying demand process. International Journal of Production Economics, 119(1), 17-23.
95. Thoroe, L., Melski, A., & Schumann, M. (2009). The impact of RFID on management of returnable containers. Electronic Markets, 19(2-3), 115-124.
96. Hwang, H., Ko, Y. D., Yune, S. H., & Ko, C. S. (2009). A closed-loop recycling system with a minimum allowed quality level on returned products. International Journal of Services and Operations Management, 5(6), 758-773.
97. El Saadany, A. (2009). Inventory management in reverse logistics with imperfect production, learning, lost sales, subassemblies, and price/quality considerations.
98. Sarker, B. R., Chawhan, A. D., & Biswas, P. (2009). An optimal policy for recovery and procurement under multiple setups. Opsearch, 46(4), 390-417.
99. Topcu, A. (2009). A heuristic approach based on golden section simulation-optimization for reconfigurable remanufacturing inventory space planning.
100. Khawam, J. H. (2010).Warranty inventory management and supplier decision models. Doctoral Dissertation, Stanford University, Stanford, CA, USA. (http://pqdtopen.proquest.com/doc/305003803.html?FMT=AI).
101. Dong, J. F., Wang, L. H., &Wang, J. X. (2009). Research on reverse logistics-oriented multisources inventory control model. 16th International Conference on Industrial Engineering and Engineering Management, 21-23 October, pp. 1583-1587, Beijing, China.
102. Chang, Y. J., & Yao, M. J. (2009). A genetic algorithm for solving the economic lot scheduling problem with reworks. Journal of the Chinese Institute of Industrial Engineers, 26(5), 411-425.
103. Liu, G. F., & Yang, X.W. (2009). Multi-conditioned and capacitated production planning model for remanufacturing system. IEEE International Conference on Industrial Engineering and Engineering Management, 8-11 December, pp. 1941-1945, Hong Kong, China.
104. Lee, Y. J. (2009). Integrated forward-reverse logistics system design: An empirical investigation. Doctoral Dissertation, Washington State University, WA, USA (http://www.dissertations.wsu.edu/Dissertations/Spring2009/y-lee-042009.pdf).
105. Liu, X., Banerjee, A., & SL Kim, S.L. (2009). Models for retail pricing and customer return incentive for remanufacturing a product. In Proceedings of the POMS 20th Annual Conference, 1-4 May, Vol. 1, 30 pages, Orlando, FL, USA. (http://pomsmeetings.org/ConfProceedings/011/FullPapers/011-0851.pdf).
106. Chung, C. J., &Wee, H. M. (2009). An Integrated production inventory deteriorating model for short life-cycle green product remanufacturing. 6th Australia Conference on Life Cycle Assessment Suitability tools for a new climate. 16-19 February, Melbourne, Australia (http://conference.alcas.asn.au/2009/Chung%20and%20Wee.pdf).
107. El Saadany, A., & Jaber, M. Y. (2010). A production/remanufacturing inventory model with price and quality dependant return rate. Computers & Industrial Engineering, 58(3), 352-362.
108. Sana, S. S., & Chaudhuri, K. (2010). An EMQ model in an imperfect production process. International Journal of Systems Science, 41(6), 635-646.
109. Konstantaras, I., Skouri, K., & Jaber, M. Y. (2010). Lot sizing for a recoverable product with inspection and sorting. Computers & Industrial Engineering, 58(3), 452-462.
110. Konstantaras, I., & Skouri, K. (2010). Lot sizing for a single product recovery system with variable setup numbers. European Journal of Operational Research, 203(2), 326-335.
111. Yang, P. C., Wee, H. M., Chung, S. L., & Ho, P. C. (2010). Sequential and global optimization for a closed-loop deteriorating inventory supply chain. Mathematical and Computer Modeling, 52(1), 161-176.
112. Yuan, K. F., & Gao, Y. (2010). Inventory decision-making models for a closed-loop supply chain system. International Journal of Production Research, 48(20), 6155-6187.
113. Konstantaras, I. (2010). Optimal Control of Production and Remanufacturing in a Reverse Logistics Model with Backlogging. Mathematical Problems in Engineering, Article ID 320913, 19 pages (http://dx.doi.org/10.1155/2010/320913).
114. Johar, B.O., (2010). Inventory control issues in a disassembly line. Doctoral Dissertation, Northeastern University, Boston, MA, USA. (http://hdl.handle.net/2047/d20002809).
115. Kouchekian-Sabour, S. (2010). Reusability evaluation models in reverse logistics, Masters Thesis, Ryerson University, Toronto, ON, Canada, Paper 1545.
116. Poles, R. (2010). System Dynamics modeling of closed loop supply chain systems for evaluating system improvement strategies, Doctoral dissertation, RMIT University, Melbourne, Australia.
117. Muckstadt, J. A., & Sapra, A. (2010). Principles of Inventory Management. Springer: New York.
118. Ying, Z., Tijun, F., Hong, Z., &Weixia, X. (2010). Economic ordering quantities for manufacturing/recovery inventory system with outsourcing. IEEE International Conference on Emergency Management and Management Sciences (ICEMMS), 8-10 August, pp. 130-134, Beijing, China.
119. Liu, X. (2010). Hierarchical decision making with supply chain applications. Doctoral Dissertation, Drexel University, Philadelphia, PA, USA.
120. Chung, C. J., &Wee, H. M. (2011). Short life-cycle deteriorating product remanufacturing in a green supply chain inventory control system. International Journal of Production Economics, 129(1), 195-203.
121. Jaber, M. Y., & El Saadany, A. M. A. (2011). An economic production and remanufacturing model with learning effects. International Journal of Production Economics, 131(1), 115-127.
122. El Saadany, A. M. A., & Jaber, M. Y. (2011). A production/remanufacture model with returns' subassemblies managed differently. International Journal of Production Economics, 133(1), 119-126.
123. El Saadany, A. M. A., Jaber, M. Y., & Bonney, M. (2011). Environmental performance measures for supply chains. Management Research Review, 34(11), 1202-1221.
124. Schulz, T. (2011). A new Silver-Meal based heuristic for the single-item dynamic lot sizing problem with returns and remanufacturing. International Journal of Production Research, 49(9), 2519-2533.
125. Alamri, A. A. (2011). Theory and methodology on the global optimal solution to a General Reverse Logistics Inventory Model for deteriorating items and time-varying rates. Computers & Industrial Engineering, 60(2), 236-247.
126. Teng, H. M., Hsu, P. H., Chiu, Y., &Wee, H. M. (2011). Optimal ordering decisions with returns and excess inventory. Applied Mathematics and Computation, 217(22), 9009-9018.
127. Feng, Y., & Viswanathan, S. (2011). A new lot-sizing heuristic for manufacturing systems with product recovery. International Journal of Production Economics, 133(1), 432-438.
128. Chang, Y. J., & Yao, M. J. (2011). New heuristics for solving the economic lot scheduling problem with reworks. Journal of Industrial and Management Optimization, 7(1), 229.
129. Rabinovich, E., Sinha, R., & Laseter, T. (2011). Unlimited shelf space in Internet supply chains: Treasure trove or wasteland?. Journal of Operations Management, 29(4), 305-317.
130. Jaber, M. Y., Saadany, A. M. E., & Rosen, M. A. (2011). Simple price-driven Reverse Logistics system with entropy and exergy costs. International Journal of Exergy, 9(4), 486-502.
131. Schulz, T., & Ferretti, I. (2011). On the alignment of lot sizing decisions in a remanufacturing system in the presence of random yield. Journal of Remanufacturing, 1(1), 1-11.
132. Chaouch, B. A. (2011). A replenishment control system with uncertain returns and random opportunities for disposal. International Journal of Inventory Research, 1(3), 221-247.
133. Guo, J., & Liang, C. (2011). Models for recycling and production policy for a closed-loop system. Journal of Quality, 18(4), 303-314.
134. Hou, R., & Lin, R. (2011). The integrated inventory model with shortage and missing orders based on reverse logistics. 8th International Conference on Service Systems and Service Management (ICSSSM), 25-27 June, pp. 1-5, Tianjin, China.
135. Hung, C. Y. (2011). Optimal inventory polices in a closed-loop supply chain with reworking and remanufacturing, Master's Thesis, National Taiwan University of Science and Technology, Taipei, Taiwan. (http://pc01.lib.ntust.edu.tw/ETD-db/ETD-search/view-etd?URN=etd-0722111-170807).
136. Chang, Y. J., Chen, S. C., & Hsu, P. Y. (2011, August). A search algorithm for solving the economic lot scheduling problem with returns under the basic period approach. International Conference on Management and Service Science (MASS), pp. 1-4, Wuhan, China.
137. Dobos, I. (2001). Optimal inventory strategies for EOQ-type reverse logistics systems-Its title in Hungarian: Optimális készletezési stratégiák a reverz logisztika optimális tételnagyság modelljeiben-.
138. Özgen, C. (2011). An assessment of a two-echelon inventory system against alternative systems. Doctoral dissertation, Middle East Technical University, Ankara, Turkey (https://etd.lib.metu.edu.tr/upload/12613949/index.pdf).
139. Widyadana, G. A., &Wee, H. M. (2012). An economic production quantity model for deteriorating items with multiple production setups and rework. International Journal of Production Economics, 138 (1), 62-67.
140. Wee, H. M., & Widyadana, G. A. (2012). Economic production quantity models for deteriorating items with rework and stochastic preventive maintenance time. International Journal of Production Research, 50(11), 2940-2952.
141. Alinovi, A., Bottani, E., & Montanari, R. (2012). Reverse Logistics: A stochastic EOQ-based inventory control model for mixed manufacturing/remanufacturing systems with return policies. International Journal of Production Research, 50(5), 1243-1264.
142. Hasanov, P., Jaber, M. Y., & Zolfaghari, S. (2012). Production, remanufacturing and waste disposal models for the cases of pure and partial backordering. Applied Mathematical Modeling, 36(11), 5249-5261.
143. Yoo, S. H., Kim, D., & Park, M. S. (2012). Lot sizing and quality investment with quality cost analyzes for imperfect production and inspection processes with commercial return. International Journal of Production Economics, 140(2), 922-933.
144. Ko, Y. D., Noh, I., & Hwang, H. (2012). Cost benefits from standardization of the packaging glass bottles. Computers & Industrial Engineering, 62(3), 693-702.
145. Tsai, D. M. (2012). Optimal ordering and production policy for a recoverable item inventory system with learning effect. International Journal of Systems Science, 43(2), 349-367.
146. Singh, S. R., & Saxena, N. (2012). An optimal returned policy for a reverse logistics inventory model with backorders. Advances in Decision Sciences, 2012, Article ID 386598, 21 pages.
147. Toptal, A. (2012). Integration of shipment scheduling decisions for forward and reverse channels in a recoverable item system. International Journal of Production Economics, 140(1), 129-137.
148. Plewa, M., & Jodejko-Pietruczuk, A. (2012). The reverse logistics model with reusing of components of series system product. Reliability: Theory & Applications, 7(1), 73-87.
149. Juan, L. (2012). Price decision analysis for reusable product under symmetric information. In Proceedings of the 2012 Fifth International Conference on Information and Computing Science, 24-25 July, pp. 142-145, Liverpool, England, UK.
150. Dobos, I. (2012). An alternative solution to an economic order quantities for recoverable item inventory systems. Social and Management Sciences, 19(2), 87-96.
151. Mishra, V. K. (2012). Production inventory model for deteriorating items with shortages and salvage value under reverse logistics. International Journal of Mathematical Modeling & Computations, 2(2), 99-110.
152. He, B., & Zhao, H. (2012). MDP application in fixed-quantity inventory control of HRMS. International Journal of Computer Applications in Engineering Sciences, 2(1), 12-16.
153. El Saadany, A., Jaber, M. Y., & Bonney, M. (2013). How many times to remanufacture?. International Journal of Production Economics, 143(2), 598-604.
154. Singha, S. R., Prasherb, L., & Saxenaa, N. (2013). A centralized reverse channel structure with flexible manufacturing under the stock out situation. International Journal of Industrial Engineering Computations, 4(4), 559-570.
155. Wee, H. M., & Widyadana, G. A. (2013). A production model for deteriorating items with stochastic preventive maintenance time and rework process with FIFO rule. Omega, 41(6), 941-954.
156. Yang, P. C., Chung, S. L., Wee, H. M., Zahara, E., & Peng, C. Y. (2013). Collaboration for a closed-loop deteriorating inventory supply chain with multi-retailer and price-sensitive demand. International Journal of Production Economics, 143(2), 557-566.
157. Mondal, M., Maity, A. K., Maiti, M. K., & Maiti, M. (2013). A production-repairing inventory model with fuzzy rough coefficients under inflation and time value of money. Applied Mathematical Modeling, 37(5), 3200-3215.
158. Pal, B., Sana, S. S., & Chaudhuri, K. (2013). A stochastic inventory model with product recovery. CIRP Journal of Manufacturing Science and Technology, 6(2), 120-127.
159. Andrew-Munot, M., & Ibrahim, R. N. (2013). Development and analysis of mathematical and simulation models of decision-making tools for remanufacturing. Production Planning & Control, 24 (12), 1081-1100.
160. Ali, S. S., Madaan, J., Chan, F. T., & Kannan, S. (2013). Inventory management of perishable products: A time decay linked logistic approach. International Journal of Production Research, 51 (13), 3864-3879.
161. Li, J. (2013). Price decision analysis for reusable product under asymmetric information. In Proceedings of 20th International Conference on Industrial Engineering and Engineering Management, pp. 935-941, Springer: Berlin, Heidelberg.
162. Singh, S. R., & Saxena, N. (2013). A closed loop supply chain system with flexible manufacturing and reverse logistics operation under shortages for deteriorating items. Procedia Technology, 10, 330-339.
163. Shah, N. H., Patel, D. G., & Shah, D. B. (2013). EPQ model for trended demand with rework and random preventive machine time. ISRN Operations Research, 2013, Article ID 485172, 8 pages.
164. Feng, L., Zhang, J., & Tang, W. (2013). Optimal control of production and remanufacturing for a recovery system with perishable items. International Journal of Production Research, 51(13), 3977-3994.
165. Pal, B., Sana, S. S., & Chaudhuri, K. (2013). A stochastic inventory model with product recovery. CIRP Journal of Manufacturing Science and Technology, 6(2), 120-127.
166. Benkherouf, L., Skouri, K., & Konstantaras, I. (inpress). Optimal lot sizing for a production-recovery system with time-varying demand over a finite planning horizon. IMA Journal of Management Mathematics, doi:10.1093/imaman/dpt015167.
167. Mondal, M., Maiti, M. K., & Maiti, M. (2013). A production-recycling model with variable demand, demand-dependent fuzzy return rate: A fuzzy differential equation approach. Computers & Industrial Engineering, 64(1), 318-332.
168. Lin, H. J. (2015). Two-echelon stochastic inventory system with returns and partial backlogging. International Journal of Systems Science, 46(6), 966-975.
169. Dem, H., & Prasher, L. (2013). Imperfect production system under reverse logistics in stock-out situation: EPQ model. Advances in Decision Sciences, Article ID 915675, 10 pages.
170. Omar, M., & Yeo, I. (2014). A production-repair inventory model with time-varying demand and multiple setups. International Journal of Production Economics, 155, 398-405.
171. Feng, Y., & Viswanathan, S. (2014). Heuristics with guaranteed performance bounds for a manufacturing system with product recovery. European Journal of Operational Research, 232(2), 322-329.
172. Parvini, M., Atashi, A., Husseini, S. M. M., & Esfahanipour, A. (2014). A two-echelon inventory model with product returns considering demands dependent return rates. The International Journal of Advanced Manufacturing Technology, 72(1), 107-118.
173. Kim, T., & Glock, C. H. (2014). On the use of RFID in the management of reusable containers in closed-loop supply chains under stochastic container return quantities. Transportation Research Part E: Logistics and Transportation Review, 64, 12-27.
174. Singh, S. R., & Saxena, N. (2014). A closed loop supply chain inventory model for the deteriorating items with JIT implementation. In Proceedings of the Third International Conference on Soft Computing for Problem Solving, pp. 17-30, Springer: India.
175. Schulz, T., & Voigt, G. (2014). A flexibly structured lot sizing heuristic for a static remanufacturing system. Omega, 44, 21-31.
176. Singh, S. R., & Saxena, N. (2014). The value of product life-cycle for deteriorating items in a closed loop under the reverse logistics Operations. In Proceedings of the Second International Conference on Soft Computing for Problem Solving (SocProS 2012), 28-30 December Advances in Intelligent Systems and Computing, Vol. 236, pp. 383-395, Springer: India.
177. Yu, J. C. Pricing strategy for product reuse at three quality levels when demand is sensitive to price and availability. Asian Pacific Industrial Engineering and Management System Conference, Cebu, The Philippines (https://nas.takming.edu.tw/upload/SchTarget/0003078/rs0202-1006.pdf).
178. Flapper, S. D., Gayon, J. P., & Lim, L. L. (2014). On the optimal control of manufacturing and remanufacturing activities with a single shared server. European Journal of Operational Research, 234(1), 86-98.
179. Leung, K. N. F. (2014). Corrigendum of 'A deterministic model for a repairable item inventory system with a finite repair rate'. International Journal of Production Research, 52(1), 66-71.
180. Ahiska, S. S., & Kurtul, E. (2014). Modeling and analysis of a product substitution strategy for a stochastic manufacturing/remanufacturing system. Computers & Industrial Engineering, 72, 1-11.
181. Singh, S. R., Jain, S., & Pareek, S. (2014). An economic production model for time dependent demand with rework and multiple production setups. International Journal of Industrial Engineering Computations, 5(2), 305-314.
182. Jaber, M. Y., Zanoni, S., & Zavanella, L. E. (2014). A consignment stock coordination scheme for the production, remanufacturing and waste disposal problem. International Journal of Production Research, 52(1), 50-65.
183. Chung, S. L., Wee, H. M., & Yang, P. C. (2007). Price discount for a closed-loop supply chain coordination policy with remanufacturing and price sensitive demand for deteriorating items. In: Proceedings of the 2nd International Conference on Operations and Supply Chain Management, 18-20 May 2007, Novotel Bangkok on Siam Square, Bangkok, Thailand.
184. M. Fleischmann, J.M. Bloemhof-Ruwaard, R. Dekker, E. van der Laan, J.A. van Nunen, L.N. van Wassenhove, Quantitative models for reverse logistics: A review, Eur. J. Oper. Res. 103 (1) (1997) 1-17.
185. J.B. Sheu, Y.J. Chen, Impact of government financial intervention on competition among green supply chains, Int. J. Prod. Econ. 138 (1) (2012) 201-213.
186. R. Subramanian, S. Gupta, B. Talbot, Product design and supply chain coordination under extended producer responsibility, Prod. Oper. Manag. 18 (3) (2009) 259-277.
187. A. Atasu, L.N. van Wassenhove, An operations perspective on product take-back legislation for e-waste: Theory, practice, and research needs, Prod. Oper. Manag. 21 (3) (2012) 407-422.
188. W. Bei, S. Linyan, A review of reverse logistics, Appl. Sci. 7 (2005) 16-29.
189. B. Gulsun, G. Biyik, D. Ozgen, Reverse logistics: A survey, in: Proceedings of the 10th International Research/Expert Conference TMT 2006, Barcelona-Lloret de Mar, Spain, 2006 11-15 September.
190. M. Bonney, M.Y. Jaber, Environmentally responsible inventory models: Non-classical models for a non-classical era, Int. J. Prod. Econ. 133 (1) (2011)43-53.
191. V.D.R. Guide, T.P. Harrison, L.N. van Wassenhove, The challenge of closed-loop supply chains, Interfaces 33 (6) (2003) 3-6.
192. M.P. de Brito, R. Dekker, A Framework for Reverse Logistics. ERIM Report Series Research in Management, ERS-2003-045-L1S, 2003.
193. S. Pokharel, A. Mutha, Perspectives in reverse logistics: A review, Resour. Conserv. Recycl. 53 (4) (2009) 175-182.
194. D.A. Schrady, A deterministic inventory model for reparable items, Nav. Res. Logist. Q. 14 (3) (1967) 391-398.
195. V.D.R. GuideJr, R. Srivastava, Repairable inventory theory: Models and applications, Eur. J. Oper. Res. 102 (1) (1997) 1-20.
196. P. Sasikumar, G. Kannan, Issues in reverse supply chain, part 111: Classification and simple analysis, Int. J. Sustain. Eng. 2 (1) (2009) 2-27.
197. N. Bostel, P. Dejax, Z. Lu, The design, planning, and optimization of reverse logistics networks, Logistics Systems: Design and Optimization, Springer, US, 2005, pp. 171-212.
198. S.R. Singh, N. Saxena, An optimal returned policy for a reverse logistics inventory model with backorders, Adv. Decis. Sci. 2012 (2012) 21 Article ID 386598 http://www.hindawi.com/journals/ads/2012/386598/cta/.
199. E. Akgali, S. Cetinkaya, Quantitative models for inventory and production planning in closed-loop supply chains, Int. J. Prod. Res. 49 (8) (2011) 2373-2407.
200. A.M.A El Saadany, M.Y. Jaber, A production/remanufacturing inventory model with price and quality dependant return rate, Comput. Ind. Eng. 58 (3) (2010) 352-362.
201. R. Kleber, S. Zanoni, L. Zavanella, On how buyback and remanufacturing strategies affect the profitability of spare parts supply chains, Int. J. Prod. Econ. 133 (1) (2011) 135-142.
202. S. Agrawal, R.K. Singh, Q. Murtaza, A literature review and perspectives in reverse logistics, Resour. Conservat. Recycl. 97 (2015) 76-92.
203. K. Govindan, H. Soleimani, D. Kannan, Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future, Eur. J. Oper. Res. 240 (2015) 603-626.
204. M. Brandenburg, K. Govindan, J. Sarkis, S. Seuring, Quantitative models for sustainable supply chain management: Developments and directions, Eur. J. Oper. Res. 233 (2) (2014) 299-312.
205. S. Seuring, S. Gold, Conducting content-analysis based literature reviews in supply chain management, Supply Chain Manag. 17 (5) (2012) 544-555.
206. K. Richter, The EOQ repair and waste disposal model with variable setup numbers, Eur. J. Oper. Res. 95 (2) (1996) 313-324.
207. K. Richter, The extended EOQ repair and waste disposal model, Int. J. Prod. Econ. 45 (1-3) (1996) 443-447.
208. K. Richter, Pure and mixed strategies for the EOQ repair and waste disposal problem, OR Spektr. 19 (2) (1997) 123-129.
209. K. Richter, I. Dobos, Analysis of the EOQ repair and waste disposal problem with integer setup numbers, Int. J. Prod. Econ. 59 (1-3) (1999) 463-467.
210. I. Dobos, K. Richter, A production/recycling model with stationary demand and return rates, Cent. Eur. J. Oper. Res. 11 (1) (2003) 35-46.
211. I. Dobos, K. Richter, An extended production/recycling model with stationary demand and return rates, Int. J. Prod. Econ. 90 (3) (2004) 311-323.
212. I. Dobos, K. Richter, A production/recycling model with quality consideration, Int. J. Prod. Econ. 104 (2) (2006) 571-579.
213. R.H. Teunter, Economic order quantities for recoverable item inventory system, Nav. Res. Logist. 48 (6) (2001) 484-495.
214. R.H. Teunter, Economic order quantities for stochastic discounted cost inventory system with remanufacturing, Int. J. Logist. 5 (2) (2002) 161-175.
215. R.H. Teunter, Lot-sizing for inventory systems with product recovery, Comput. Ind. Eng. 46 (3) (2004) 431-441.
216. A.M.A. El Saadany, M.Y. Jaber, The EOQ repair and waste disposal model with switching costs, Comput. Ind. Eng. 55 (1) (2008) 219-233.
217. M.Y. Jaber, A. El Saadany, The production, remanufacture and waste disposal model with lost sales, Int. J. Prod. Econ. 120 (1) (2009) 115-124.
218. M.Y. Jaber, A. El Saadany, An economic production and remanufacturing model with learning effects, Int. J. Prod. Econ. 131 (1) (2011) 115-127.
219. M.Y. Jaber (Ed.), Learning Curves: Theory, Models, and Applications, CRC Press, 2011.
220. D.J. Waldman, S.A. Yourstone, Learning and thinking systems, in: M.Y. Jaber (Ed.), Learning Curves: Theory, Models and Applications, CRC Press: Taylor & Francis Group, 2011, p. 37-56.
221. A.M. AEl Saadany, M.Y. Jaber, Aproduction/remanufacture model with returns' subassemblies managed differently, Int.J. Prod. Econ. 133 (1) (2011) 119-126.
222. A.M.A El Saadany, M.Y. Jaber, M. Bonney, How many times to remanufacture, Int. J. Prod. Econ. 143 (2) (2013) 598-604.
223. P. Hasanov, M.Y. Jaber, S. Zolfaghari, Production, remanufacturing and waste disposal models for the cases of pure and partial backordering, Appl. Math. Model. 36 (11) (2012) 5249-5261.
224. S.S. Ali, J. Madaan, F.T. Chan, S. Kannan, Inventory management of perishable products: A time decay linked logistic approach, Int. J. Prod. Res. 51 (13) (2013) 3864-3879.
225. Y. Feng, S. Viswanathan, Heuristics with guaranteed performance bounds for a manufacturing system with product recovery, Eur. J. Oper. Res. 232 (2) (2014) 322-329.
226. M. Parvini, A. Atashi, S.M.M. Husseini, A. Esfahanipour, A two-echelon inventory model with product returns considering demands dependent return rates, Int. J. Adv. Manuf. Tech. 72 (1) (2014) 107-118.
227. M. Omar, I. Yeo, A production-repair inventory model with time-varying demand and multiple setups, Int. J. Prod. Econ. 155 (2014) 398-405.
228. M.Y. Jaber, S. Zanoni, L.E. Zavanella, A consignment stock coordination scheme for the production, remanufacturing and waste disposal problem, Int. J. Prod. Res. 52(1) (2014) 50-65.
229. L. Feng, J. Zhang, W. Tang, Optimal control of production and remanufacturing for a recovery system with perishable items, Int. J. Prod. Res. 51 (13) (2013) 3977-3994.
230. S.R. Singh, N. Saxena, A closed loop supply chain system with flexible manufacturing and reverse logistics operation under shortages for deteriorating items, Procedia Tech. 10 (2013) 330-339.
231. V.K. Mishra, Production inventory model for deteriorating items with shortages and salvage value under reverse logistics, Int. J. Math. Model. Comput. 2 (2) (2012)99-110.
232. M.Y. Jaber, M.A. Rosen, The economic order quantity repair and waste disposal model with entropy cost, Eur. J. Oper. Res. 188 (1) (2008) 109-120.
233. M.Y. Jaber, A.M.E. Saadany, M.A. Rosen, Simple price-driven reverse logistics system with entropy and exergy costs, Int. J. Exergy 9 (4) (2011) 486-502.
234. P. Glavic, R. Lukman, Review of sustainability terms and their definitions, J. Clean. Prod. 15 (18) (2007) 1875-1885.
235. A.M. King, S.C. Burgess, W. Ijomah, C.A. McMahon, Reducing waste: Repair, recondition, remanufacture or recycle, Sustain. Dev. 14 (4) (2006) 257-267.
236. P. Ahi, C. Searcy, A comparative literature analysis of definitions for green and sustainable supply chain management, J. Clean. Prod. 52 (2013) 329-341.
237. J. Sarkis, Q. Zhu, K.H. Lai, An organizational theoretic review of green supply chain management literature, Int. J. Prod. Econ. 130 (1) (2011) 1-15.
238. J.D. Linton, R. Klassen, V. Jayaraman, Sustainable supply chains: An introduction, J. Oper. Manag. 25 (6) (2007) 1075-1082.
239. Q. Zhu, J. Sarkis, Relationships between operational practices and performance among early adopters of green supply chain management practices in Chinese manufacturing enterprises, J. Oper. Manag. 22 (3) (2004) 265-289.
240. I. Ferretti, S. Zanoni, L. Zavanella, A. Diana, Greening the aluminium supply chain, Int. J. Prod. Econ. 108 (1) (2007) 236-245.
241. R.I. van Hoek, From reversed logistics to green supply chains, Supply Chain Manag. 4 (3) (1999) 129-135.
242. E.L. Marsillac, Environmental impacts on reverse logistics and green supply chains: Similarities and integration, Int. J. Logist. Syst. Manag. 4 (4) (2008) 411-422.
243. N. Matar, M.Y. Jaber, C. Searcy, A reverse logistics inventory model for plastic bottles, Int. J. Logist. Syst. Manag. 25 (2) (2014) 315-333.
244. M.Y. Jaber, M. Bonney, The effects of learning and forgetting on the optimal lot size quantity of intermittent production runs, Prod. Plan. Contr. 9(1) (1998) 20-27.
245. M.Y. Jaber, M. Bonney, Lot sizing with learning and forgetting in set-ups and in product quality, Int. J. Prod. Econ. 83 (1) (2003) 95-111.
246. M.Y. Jaber, S.K. Goyal, M. Imran, Economic production quantity model for items with imperfect quality subject to learning effects, Int. J. Prod. Econ. 115 (1) (2008) 143-150.
247. M. Khan, M.Y. Jaber, M.I.M. Wahab, Economic order quantity model for items with imperfect quality with learning in inspection, Int. J. Prod. Econ. 124 (1) (2010) 87-96.
248. A.M.A. El Saadany, M.Y. Jaber, M. Bonney, Environmental performance measures for supply chains, Manag. Res. Rev. 34 (11) (2011) 1202-1221.
249. M.I.M. Wahab, S.M.H. Mamun, P. Ongkunaruk, EOQ models for a coordinated two-level international supply chain considering imperfect items and enviÂronmental impact, Int. J. Prod. Econ. 134 (1) (2011) 151-158.
250. D. Kannan, A. Diabat, M. Alrefaei, K. Govindan, G. Yong, A carbon footprint based reverse logistics network design model, Resour. Conserv. Recycl. 67 (2012) 75-79.
251. C.H. Glock, M.Y. Jaber, C. Searcy, Sustainability strategies in an EPQ model with price-and quality-sensitive demand, Int. J. Logist. Manag. 23 (3) (2012) 340-359.
252. M.Y. Jaber, C.H. Glock, A.M. El Saadany, Supply chain coordination with emissions reduction incentives, Int. J. Prod. Res. 51 (1) (2013) 69-82.
253. S. Zanoni, L. Bettoni, C.H. Glock, Energy implications in a two-stage production system with controllable production rates, Int. J. Prod. Econ. 149 (2014) 164-171.
254. S. Zanoni, L. Mazzoldi, M.Y. Jaber, Vendor-managed inventory with consignment stock agreement for single vendor-single buyer under the emission-trading scheme, Int. J. Prod. Res. 52 (1) (2014) 20-31.
255. E. Bazan, M.Y. Jaber, S. Zanoni, Supply chain models with greenhouse gases emissions, energy usage and different coordination decisions, Appl. Math. Model. Appl. Math. Model. 38 (17) (2015) 5131-5151.
256. T. Gutowski, J. Dahmus, A. Thiriez, Electrical energy requirements for manufacturing processes, in: Proceedings of the 13th C1RP International Conference on Life Cycle Engineering, 5, Leuven, Belgium, 2006, pp. 560-564.
257. G. Mouzon, M.B. Yildirim, J. Twomey, Operational methods for minimization of energy consumption of manufacturing equipment, Int. J. Prod. Res. 45 (18-19) (2007)4247-4271.
258. K. Nolde, M. Morari, Electrical load tracking scheduling of a steel plant, Comput. Ind. Eng. 34 (11) (2010) 1899-1903.
259. K. Intlekofer, B. Bras, M. Ferguson, Energy implications of product leasing, Environ. Sci. Technol. 44 (12) (2010) 4409-4415.
260. I. Konstantaras, K. Skouri, M.Y. Jaber, Lot sizing for a recoverable product with inspection and sorting, Comput. Ind. Eng. 58 (3) (2010) 452-462.
261. T.C Kuo, S.H. Huang, H.C. Zhang, Design for manufacture and design for'X': Concepts, applications, and perspectives, Comput. Ind. Eng. 41 (3) (2001) 241-260.
262. M.Z. Hauschild, J. Jeswiet, L. Alting, Design for environment-do we get the focus right, CIRP Ann.-Manuf. Technol. 53 (1) (2004) 1-4.
263. M. Bonney, M.Y. Jaber, Developing an input-output activity matrix (IOAM) for environmental and economic analysis of manufacturing systems and logistics chains, Int. J. Prod. Econ. 143 (2) (2013) 589-597.
264. M.Y. Jaber (Ed.), Inventory Management: Non-Classical Views, CRC Press, FL, Boca Raton.
265. C.C. Coello, A comprehensive survey of evolutionary-based multiobjective optimization techniques, Knowl. Inform. Syst. 1 (3) (1999) 269-308.
266. E. Bazan, M.Y. Jaber, A.M. El Saadany, Carbon emissions and energy effects on manufacturing-remanufacturing inventory models, Comput. Ind. Eng. 88 (2015) 307-316.