Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials

Materials and Design

Volumn 89, Issue , 2016, Pages 9-20

  Hedayati, R ^a   Sadighi, M ^a   Mohammadi Aghdam, M ^a   Zadpoor, A A ^b  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Additive manufacturing; Multiple counting; Open cell porous biomaterials

Indexed keywords

3D PRINTERS; BIOMECHANICS; BONE; CELLS; CYTOLOGY; ELASTIC MODULI; GEOMETRY; MECHANICAL PROPERTIES; POISSON RATIO; STRUCTURAL PROPERTIES; YIELD STRESS;

CELLULAR STRUCTURE; CROSS-SECTION GEOMETRY; ELASTIC PROPERTIES; INTERCONNECTED STRUCTURES; LATTICE STRUCTURES; MULTIPLE COUNTING; OPEN-CELL; RHOMBIC DODECAHEDRON;

DENSITY (SPECIFIC GRAVITY);

EID: 84947710395     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2015.09.052     Document Type: Article

References (45)

1. Cherney D.L., Amstutz H.C. Total hip replacement in the previously septic hip. J. Bone Joint Surg. Am. 1983, 65(9):1256-1265.
2. Harris W.H., Sledge C.B. Total hip and total knee replacement. N. Engl. J. Med. 1990, 323(11):725-731.
3. Rohlmann A., Zander T., Bergmann G. Effect of total disc replacement with ProDisc on intersegmental rotation of the lumbar spine. Spine 2005, 30(7):738-743.
4. Parthasarathy J., Starly B., Raman S., Christensen A. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). J. Mech. Behav. Biomed. Mater. 2010, 3(3):249-259.
5. Borleffs M. Finite element modeling to predict bulk mechanical properties of 3D printed metal foams 2012, TU Delft, Delft University of Technology.
6. Sundfeldt M., Carlsson L.V., Johansson C.B., Thomsen P., Gretzer C. Aseptic loosening, not only a question of wear: a review of different theories. Acta Orthop. 2006, 77(2):177-197.
7. Bougherara H., Bureau M., Campbell M., Vadean A., Yahia L.H. Design of a biomimetic polymer-composite hip prosthesis. J. Biomed. Mater. Res. A 2007, 82(1):27-40.
8. Stress Shielding 2015, (cited 2015).
9. Amin Yavari S., Wauthlé R., Böttger A.J., Schrooten J., Weinans H., Zadpoor A.A. Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting. Appl. Surf. Sci. 2014, 290:287-294.
10. Hedayati R., Sadighi M., Mohammadi-Aghdam M., Zadpoor A.A. Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell. J. Mech. Behav. Biomed. Mater. 2016, 53:272-294.
11. Zardiackas L.D., Parsell D.E., Dillon L.D., Mitchell D.W., Nunnery L.A., Poggie R. Structure, metallurgy, and mechanical properties of a porous tantalum foam. J. Biomed. Mater. Res. 2001, 58(2):180-187.
12. Clemow A., Weinstein A., Klawitter J., Koeneman J., Anderson J. Interface mechanics of porous titanium implants. J. Biomed. Mater. Res. 1981, 15(1):73-82.
13. Long M., Rack H. Titanium alloys in total joint replacement-a materials science perspective. Biomaterials 1998, 19(18):1621-1639.
14. Weaire D., Phelan R. Cellular structures in three dimensions. Philos. Trans. R. Soc. Lond. A Math. Phys. Eng. Sci. 1996, 354(1715):1989-1997.
15. Singh R., Lee P., Lindley T., Kohlhauser C., Hellmich C., Bram M., Imwinkelried T., Dashwood R. Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling. Acta Biomater. 2010, 6(6):2342-2351.
16. Fujibayashi S., Neo M., Kim H.-M., Kokubo T., Nakamura T. Osteoinduction of porous bioactive titanium metal. Biomaterials 2004, 25(3):443-450.
17. Van Bael S., Kerckhofs G., Moesen M., Pyka G., Schrooten J., Kruth J.-P. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures. Mater. Sci. Eng. A 2011, 528(24):7423-7431.
18. Campoli G., Borleffs M., Amin Yavari S., Wauthle R., Weinans H., Zadpoor A.A. Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing. Mater. Des. 2013, 49:957-965.
19. Van der Stok J., Van der Jagt O.P., Amin Yavari S., De Haas M.F., Waarsing J.H., Jahr H., Van Lieshout E.M., Patka P., Verhaar J.A., Zadpoor A.A. Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects. J. Orthop. Res. 2013, 31(5):792-799.
20. Ahmadi S., Campoli G., Amin Yavari S., Sajadi B., Wauthlé R., Schrooten J., Weinans H., Zadpoor A. Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells. J. Mech. Behav. Biomed. Mater. 2014, 34:106-115.
21. Ushijima K., Cantwell W., Mines R., Tsopanos S., Smith M. An investigation into the compressive properties of stainless steel micro-lattice structures. J. Sandw. Struct. Mater. 2010.
22. Gibson L.J., Ashby M.F. Cellular solids: structure and properties 1997, Cambridge University Press.
23. Shulmeister V., Van der Burg M., Van der Giessen E., Marissen R. A numerical study of large deformations of low-density elastomeric open-cell foams. Mech. Mater. 1998, 30(2):125-140.
24. Babaee S., Jahromi B.H., Ajdari A., Nayeb-Hashemi H., Vaziri A. Mechanical properties of open-cell rhombic dodecahedron cellular structures. Acta Mater. 2012, 60(6):2873-2885.
25. Gent A., Thomas A. Mechanics of foamed elastic materials. Rubber Chem. Technol. 1963, 36(3):597-610.
26. Ptochos E., Labeas G. Elastic modulus and Poisson's ratio determination of micro-lattice cellular structures by analytical, numerical and homogenisation methods. J. Sandw. Struct. Mater. 2012, (pp. 1099636212444285).
27. Ptochos E., Labeas G. Shear modulus determination of cuboid metallic open-lattice cellular structures by analytical, numerical and homogenisation methods. Strain 2012, 48(5):415-429.
28. Rhombic dodecahedron. Available from: , (cited 2015). http://en.wikipedia.org/wiki/Rhombic_dodecahedron.
29. Thomson W.S. On the division of space with minimum partitional area. Acta Math. 1887, 11(1-4):121-134.
30. Weaire D., Phelan R. A counter-example to Kelvin's conjecture on minimal surfaces. Philos. Mag. Lett. 1994, 69(2):107-110.
31. Daxner T. Finite element modeling of cellular materials. Cellular and Porous Materials in Structures and Processes 2010, 47-106. Springer.
32. Lorimer A. Diamond cubic truss 2013.
33. Kraft R.W. Construction arrangement. Google Patents 1964.
34. Zheng X., Lee H., Weisgraber T.H., Shusteff M., DeOtte J., Duoss E.B., Kuntz J.D., Biener M.M., Ge Q., Jackson J.A. Ultralight, ultrastiff mechanical metamaterials. Science 2014, 344(6190):1373-1377.
35. Heinl P., Körner C., Singer R.F. Selective electron beam melting of cellular titanium: mechanical properties. Adv. Eng. Mater. 2008, 10(9):882-888.
36. Amin Yavari S., Wauthlé R., van der Stok J., Riemslag A.A., Janssen M., Mulier M., Kruth J.-P., Schrooten J., Weinans H., Zadpoor A.A. Fatigue behavior of porous biomaterials manufactured using selective laser melting. Mater. Sci. Eng. C 2013, 33(8):4849-4858.
37. Ashby M.F. Metal foams: a design guide 2000, Butterworth-Heinemann.
38. Jang W.-Y., Kraynik A.M., Kyriakides S. On the microstructure of open-cell foams and its effect on elastic properties. Int. J. Solids Struct. 2008, 45(7):1845-1875.
39. Wauthle R., Vrancken B., Beynaerts B., Jorissen K., Schrooten J., Kruth J.-P., Van Humbeeck J. Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures. Addit. Manuf. 2015, 5:77-84.
40. Mechanical properties of bone. DoITPoMS Available from:. http://www.doitpoms.ac.uk/tlplib/bones/bone_mechanical.php.
41. Poelert S., Valstar E., Weinans H., Zadpoor A.A. Patient-specific finite element modeling of bones. Proc. Inst. Mech. Eng. H J. Eng. Med. 2013, 227(4):464-478.
42. Nakajima K., Kondoh J., Fujiwara M. An experimental study on the dynamic traits of dehydrated mandibles in relation to Yang's modulus and Poisson's ratio of compact bone. Shika Gakuho Dent. Sci. Rep. 1984, 84(12):1951.
43. Ashman R.B. Ultrasonic determination of the elastic properties of cortical bone: techniques and limitations 1982, Tulane University.
44. Zysset P.K., Guo X.E., Hoffler C.E., Moore K.E., Goldstein S.A. Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. J. Biomech. 1999, 32(10):1005-1012.
45. Peterson J., Dechow P.C. Material properties of the inner and outer cortical tables of the human parietal bone. Anat. Rec. 2002, 268(1):7-15.