Pathways to Biodegradable Flame Retardant Polymer (Nano)Composites

Polymer Green Flame Retardants

Volumn , Issue , 2014, Pages 709-773

  Murariu, M ^a   Laoutid, F ^a   Dubois, Ph ^a   Fontaine, G ^b   Bourbigot, S ^b   Devaux, E ^c   Campagne, C ^c   Ferreira, M ^c   Solarski, S ^c  

^a UNIVERSITY OF MONS   (Belgium)

^b Ecole Nationale Superieure de Chimie de Lille   (France)

^c UNIV LILLE   (France)

Author keywords

Bionanocomposites; Fibers; Flame retardancy; Nanofillers; Polylactide

Indexed keywords

BIODEGRADABLE POLYMERS; BIOPOLYMERS; ENVIRONMENTAL IMPACT; FIBERS; FLAME RESISTANCE; POLYESTERS; POLYMER BLENDS; YARN;

ALIPHATIC POLYESTER; BIONANOCOMPOSITES; END-USE PROPERTIES; ENGINEERING SECTORS; FLAME RETARDANCY; FLAME RETARDANT POLYMERS; NANO-FILLERS; POLY LACTIDE;

FLAME RETARDANTS;

EID: 84942090962     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-444-53808-6.00021-4     Document Type: Chapter

References (180)

1. Platt D. Biodegradable polymers-market report 2006, Smithers Rapra Limited, Shawbury, Shrewsbury, Shropshire, UK.
2. Madhavan Nampoothiri K., Nair N.R., John R.P. An overview of the recent developments in polylactide (PLA) research. Biores Technol 2010, 101:8493-8501.
3. Dubois Ph, Murariu M. The "green" challenge: high performance PLA (nano)composites. JEC Compos Mag 2008, 45:66-69.
4. Smock D. Bioplastics: Technologies and global markets September 2010, BCC Research, report code PLS050A. http://www.bccresearch.com/report/bioplastics-technologies-markets-pls050a.html.
5. Rapid growth forecast for biodegradable polymers. Plast Addit Compd 2008, 10:4.
6. Shen L., Haufe J., Patel M.K. Product overview and market projection of emerging bio-based plastics 2009, PRO-BIP 2009, Copernicus Institute for Sustainable Development and Innovation, Utrecht University, Utrecht.
7. Ravenstijn J. The state-of-the-art on bioplastics Products: markets, trends, and technologies. Polymedia Publ GmbH 2010.
8. Bourbigot S., Fontaine G. Flame retardancy of polylactide: an overview. Polym Chem 2010, 1:1413-1422.
9. Averous L. Biodegradable multiphase systems based on plasticized starch: a review. J Macromol Sci Polym Rev 2004, C44:231-274.
10. Bordes P., Pollet E., Avérous L. Nano-biocomposites: biodegradable polyester/nanoclay systems. Prog Polym Sci 2009, 34:125-155.
11. Auras R., Harte B., Selke S. An overview of polylactides as packaging materials. Macromol Biosci 2004, 4:835-864.
12. Garlotta D. A literature review of poly(lactic acid). J Polym Environ 2001, 9:63-84.
13. Sodergard A., Stolt M. Properties of lactic acid based polymers and their correlation with composition. Prog Polym Sci 2002, 27:1123-1163.
14. Drumright R.E., Gruber P.R., Henton D.E. Polylactic acid technology. Adv Mater 2000, 12:1841-1846.
15. Jamshidian M., Tehrany E.A., Imran M., Jacquot M., Desobry S. Poly-lactic acid: production, applications, nanocomposites, and release studies. Compr Rev Food Sci F 2010, 9:552-571.
16. Lim L.T., Auras R., Rubino M. Processing technologies for poly (lactic acid). Prog Polym Sci 2008, 33:820-852.
17. Paul M.A., Delcourt C., Alexandre M., Degée Ph, Monteverde F., Dubois Ph Polylactide/montmorillonite nanocomposites. Study of the hydrolytic degradation. Polym Degrad Stabil 2005, 87:535-542.
18. Murariu M., Da Silva Ferreira A., Degée Ph, Alexandre M., Dubois Ph Polylactide compositions. Part 1: effect of filler content and size on mechanical properties of PLA/calcium sulfate composites. Polymer 2007, 48:2613-2618.
19. Yu L., Dean K., Li L. Polymer blends and composites from renewable resource. Prog Polym Sci 2006, 31:576-602.
20. Anderson K.S., Schreck K.M., Hillmyer M.A. Toughening polylactide. Polym Rev 2008, 48:85-108.
21. Alexandre M., Dubois Ph Polymer-layered silicate nanocomposites: preparation, properties and used of a new class of materials. Mater Sci Eng 2000, 28:1-63.
22. Wang L., He X., Wilkie C. The utility of nanocomposites in fire retardancy. Materials 2010, 3:4580-4606.
23. Paul D.R., Robeson L.M. Polymer nanotechnology: nanocomposites. Polymer 2008, 49:3187-3204.
24. Murariu M., Doumbia A., Bonnaud L., Dechief A.L., Paint Y., Ferreira M., et al. High-performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties. Biomacromolecules 2011, 12:1762-1771.
25. Pavlidou S., Papaspyrides C.D. A review on polymer-layered silicate nanocomposites. Prog Polym Sci 2008, 33:1119-1198.
26. Hussain F., Hojjati M., Okamoto M., Gorga R.E. Polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 2006, 40:1511-1575.
27. Gao F. Clay/Polymer composites: the Story. Mater Today 2004, 7:50-55.
28. Sinda Ray S., Bousmina M. Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 2005, 50:962-1079.
29. Sorrentino A., Gorrasi G., Vittoria V. Potential perspectives of bio-nanocomposites for food packaging applications. Trends Food Sci Tech 2007, 18:84-95.
30. Goffin A.L., Duquesne E., Moins S., Alexandre M., Dubois Ph New organic-inorganic nanohybrids via ring opening polymerization of (di)lactones initiated by functionalized polyhedral oligomeric silsesquioxane. Eur Polym J 2007, 43:4103-4113.
31. Fortunati E., Armentano I., Iannoni A., Kenny J.M. Development and thermal behaviour of ternary PLA matrix composites. Polym Degrad Stabil 2010, 95:2200-2206.
32. Okamoto M. Biodegradable polymer/layered silicate nanocomposites: a review. Handbook of biodegradable polymeric materials and their applications 2005, vol. 1:1-45. American Scientific Publishers.
33. Le Corre D., Bras J., Dufresne A. Starch nanoparticles: a review. Biomacromolecules 2010, 11:1139-1153.
34. Oksman K., Mathew A.P., Bondeson D., Kvien I. Manufacturing process of polylactic acid (PLA) cellulose whiskers nanocomposites. Compos Sci Technol 2006, 66:2776-2784.
35. Petersson L., Oksman K. Biopolymer based nanocomposites: comparing layered silicates and microcrystalline cellulose as nanoreinforcement. Compos Sci Technol 2006, 66:2187-2196.
36. Laoutid F., Bonnaud L., Alexandre M., Lopez-Cuesta J.M., Dubois Ph New prospects in FR polymer materials: from fundamentals to nanocomposites. Mater Sci Eng R 2009, 63:100-125.
37. Song R., Wang Z., Meng X., Zhang B., Tang T. Influences of catalysis and dispersion of organically modified montmorillonite on flame retardancy of polypropylene nanocomposites. J Appl Polym Sci 2007, 106:3488-3494.
38. Jang B.N., Costache M., Wilkie C.A. The relationship between thermal degradation behavior of polymer and the fire retardancy of polymer/clay nanocomposite. Polymer 2005, 46:10678-10687.
39. Troitzsch J. International plastics flammability handbook 1990, Hanser Publishers, Munich, Vienna, New York. 2nd ed.
40. Morgan A.B., Wilkie C.A. Flame retardant polymer nanocomposites 2007, John Wiley & Sons, Inc., Hoboken, NJ, USA. 1st ed.
41. McWilliams A. Global markets for nanocomposites, nanoparticles, nanoclays, and nanotubes January 2012, Report NAN021E, BCC Research, source: http://www.bccresearch.com/report/nanocomposites-global-markets-nan021e.html.
42. Sinda Ray S., Yamada K., Okamoto M., Ogami A., Ueda K. New polylactide/layered silicate nanocomposites. 3. High-performance biodegradable materials. Chem Mater 2003, 15:1456-1465.
43. Singh S., Sinda Ray S. Polylactide based nanostructured biomaterials and their applications. J Nanosci Nanotechnol 2007, 7:2596-2615.
44. Maiti P., Yamada K., Okamoto M., Ueda K., Okamoto K. New polylactide/layered silicate nanocomposites: role of organoclays. Chem Mater 2002, 14:4654-4661.
45. Sinha Ray S., Yamada K., Ogami A., Okamoto M., Ueda K. New polylactide/layered silicate nanocomposite: nanoscale control over multiple properties. Macromol Rapid Comm 2002, 23:943-947.
46. Sinha Ray S., Maiti P., Okamoto M., Yamada K., Ueda K. New polylactide/layered silicate nanocomposites. 1. Preparation, characterization and properties. Macromolecules 2002, 35:3104-3110.
47. Sinha Ray S., Yamada K., Okamoto M., Ogami A., Ueda K. New polylactide/layered silicate nanocomposites. 4. Structure, properties and biodegradability. Compos Interfaces 2003, 10:435-450.
48. Sinha Ray S., Yamada K., Okamoto M., Ueda K. New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology. Polymer 2003, 44:857-866.
49. Okamoto M. Recent advances in polymer/layered silicate nanocomposites. Mater Sci Tech Ser 2006, 22:756-779.
50. Sinha Ray S., Yamada K., Okamoto M., Ueda K. Biodegradable polylactide/montmorillonite nanocomposites. J Nanosci Nanotechnol 2003, 3:503-510.
51. Yoshida O., Okamoto M. Direct melt intercalation of polylactide chains into nano-galleries: interlayer expansion and nano-composite structure. Macromol Rapid Comm 2006, 27:751-757.
52. Kiliaris P., Papaspyrides C.D. Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy. Prog Polym Sci 2010, 35:902-958.
53. Szleifer I., Yerushalmi-Rozen R. Polymers and carbon nanotubes-dimensionality, interactions and nanotechnology. Polymer 2005, 46:7803-7818.
54. Andrews R., Weisenberger M.C. Carbon nanotube polymer composites. Curr Opin Solid State Mater Sci 2004, 8:31-37.
55. Stefanescu E.A., Daranga C., Stefanescu C. Insight into the broad field of polymer nanocomposites: from carbon nanotubes to clay nanoplatelets, via metal nanoparticles. Materials 2009, 2:2095-2153.
56. Bal S., Samal S.S. Carbon nanotube reinforced polymer composites-a state of the art. Bull Mater Sci 2007, 30:379-386.
57. Bose S., Khare R.A., Moldenaers P. Assessing the strengths and weaknesses of various types of pre-treatments of carbon nanotubes on the properties of polymer/carbon nanotubes composites: a critical review. Polymer 2010, 51:975-993.
58. Rana S., Yoo H.J., Cho J.W., Chun B.C., Park J.S. Functionalization of multi-walled carbon nanotubes with poly(ε-caprolactone) using click chemistry. J Appl Polym Sci 2011, 119:31-37.
59. Meyer F., Minoia A., Raquez J.M., Spasova M., Lazzaroni R., Dubois Ph Poly(amino-methacrylate) as versatile agent for carbon nanotube dispersion: an experimental, theoretical and application study. J Mater Chem 2010, 20:6873-6880.
60. Kashiwagi T., Grulke E., Hilding J., Groth K., Harris R., Butler K., et al. Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites. Polymer 2004, 45:4227-4239.
61. Schartel B., Pötschke P., Knoll U., Abdel-Goad M. Fire behaviour of polyamide 6/multiwall carbon nanotube nanocomposites. Eur Polym J 2005, 41:1061-1070.
62. Fina A., Bocchini S., Camino G. Catalytic fire retardant nanocomposites. Polym Degrad Stabil 2008, 93:1647-1655.
63. Villmow T., Potschke P., Pegel S., Haussler L., Kretzschmar B. Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix. Polymer 2008, 49:3500-3509.
64. Song W., Zheng Z., Lu H., Wang X. Incorporation of multi-walled carbon nanotubes into biodegradable telechelic prepolymers. Macromol Chem Phys 2008, 209:315-321.
65. Song W., Zheng Z., Tang W., Wang X. A facile approach to covalently functionalized carbon nanotubes with biocompatible polymer. Polymer 2007, 48:3658-3663.
66. Wu C.S., Liao H.T. Study on the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites. Polymer 2007, 48:4449-4458.
67. Wu D., Wu L., Zhang M., Zhao Y. Viscoelasticity and thermal stability of polylactide composites with various functionalized carbon nanotubes. Polym Degrad Stabil 2008, 93:1577-1584.
68. Tsuji H., Kawashima Y., Takikawa H., Tanaka S. Poly(L-lactide)/nano-structured carbon composites: conductivity, thermal properties, crystallization, and biodegradation. Polymer 2007, 48:4213-4225.
69. Shieh Y.T., Twu Y.K., Su C.C., Lin R.H., Liu G.L. Crystallization kinetics study of poly(L-lactic acid)/carbon nanotubes nanocomposites. J Polym Sci Pol Phys 2010, 48:983-989.
70. Bourbigot S., Fontaine G., Gallos A., Bellayer S. Reactive extrusion of PLA and of PLA/carbon nanotubes nanocomposite: processing, characterization and flame retardancy. Polym Adv Technol 2011, 22:30-37.
71. Bourbigot S., Fontaine G., Gallos A., Gérard C., Bellayer S. Functionalized-carbon multiwall nanotube as flame retardant for polylactic acid. Fire and polymers V-materials and concepts for fire retardancy 2009, vol. 1013:25-34. American Chemical Society, Washington DC. C.A. Wilkie, A.B. Morgan, G.L. Nelson (Eds.).
72. Murariu M., Dechief A.L., Bonnaud L., Paint Y., Gallos A., Fontaine G., et al. The production and properties of polylactide composites filled with expanded graphite. Polym Degrad Stabil 2010, 95:889-900.
73. Chung D.D.L. Review-graphite. J Mater Sci 2002, 37:1475-1489.
74. Zhao Y.F., Xiao M., Wang S.J., Ge X.C., Meng Y.Z. Preparation and properties of electrically conductive PPS/expanded graphite nanocomposites. Compos Sci Technol 2007, 67:2528-2534.
75. Uhl F.M., Yao Q., Nakajima H., Manias E., Wilkie C.A. Expandable graphite/polyamide 6 nanocomposites. Polym Degrad Stabil 2005, 89:70-84.
76. Yasmin A., Luo J.J., Daniel I.M. Processing of expanded graphite reinforced polymer nanocomposites. Compos Sci Technol 2006, 66:1182-1189.
77. Kalaitzidou K., Fukushima H., Drzal L.T. A new compounding method for exfoliated graphite-polypropylene nanocomposites with enhanced flexural properties and lower percolation threshold. Compos Sci Technol 2007, 67:2045-2051.
78. Chen G., Chen X., Wang H., Wu D. Dispersion of graphite nanosheets in polymer resins via masterbatch technique. J Appl Polym Sci 2007, 103:3470-3475.
79. Drzal LT, Fukushima H. Expanded graphite and products produced therefrom. US Patent 7,550,529 Board Trust Mich. State Univ. USA. 2009.
80. Chen G., Wu D., Weng W., Wu C. Exfoliation of graphite flake and its nanocomposites. Carbon 2003, 41:619-621.
81. Castrovinci A., Camino G. Fire-retardant mechanisms in polymer nano-composite materials. Multifunctional barriers for flexible structure-textile, series: Leather and paper 2007, vol. 97:87-108. Springer Berlin Heidelberg.
82. Wang D., Wilkie C.A. Fire properties of polymer nanocomposites (Chapter 9). Fire properties of polymer composite materials, series: Solid mechanics and its applications 2006, vol. 143:287-312. Springer Netherlands.
83. Dasari A., Yu Z.Z., Mai Y.W., Cai G., Song H. Roles of graphite oxide, clay and POSS during the combustion of polyamide 6. Polymer 2009, 50:1577-1587.
84. Fukushima K., Murariu M., Camino G., Dubois Ph Effect of expanded graphite/layered-silicate clay on thermal, mechanical and fire retardant properties of poly(lactic acid). Polym Degrad Stabil 2010, 95:1063-1076.
85. Miloaga D.G., Hosein H.-A.A., Rich J.M., Kjoller K., Drzal L.T. Scanning probe thermal analysis of polylactic acid/exfoliated graphite nanoplatelet (xGnP™) nanocomposites. J Biobased Mater Bioenergy 2008, 2:78-84.
86. Kalaitzidou K., Fukushima H., Drzal L.T. Mechanical properties and morphological characterization of exfoliated graphite-polypropylene nanocomposites. Compos Part A-Appl S 2007, 38:1675-1682.
87. Potts J.R., Dreyer D.R., Bielawski C.W., Ruoff R.S. Graphene-based polymer nanocomposites. Polymer 2011, 52:5-25.
88. Kim S., Drzal L.T. Comparison of Exfoliated Graphite Nanoplatelets (xGnP) and CNTs for Reinforcement of EVA Nanocomposites Fabricated by Solution Compounding Method and Three Screw Rotating Systems. J Adhes Sci Technol 2009, 23:1623-1638.
89. Jing L., Pui-Shan W., Jang-Kyo K. Hybrid nanocomposites containing carbon nanotubes and graphite nanoplatelets. Mater Sci Eng A 2008, 483-484:660-663.
90. Liu H., Brinson L.C. Reinforcing efficiency of nanoparticles: a simple comparison for polymer nanocomposites. Compos Sci Technol 2008, 68:1502-1512.
91. Santangelo S., Gorrasi G., Di Lieto R., De Pasquale S., Patimo G., Piperopoulos E., et al. Polylactide and carbon nanotubes/smectite-clay nanocomposites: preparation, characterization, sorptive and electrical properties. Appl Clay Sci 2011, 53:188-194.
92. Zhang C., Tjiu W.W., Liu T.X., Lui W.Y., Phang I.Y., Zhang W.D. Dramatically enhanced mechanical performance of Nylon-6 magnetic composites with nanostructured hybrid one-dimensional carbon nanotubes-two-dimensional clay nanoplatelet heterostructures. J Phys Chem B 2011, 115:3392-3399.
93. Dubois Ph, Murariu M, Alexandre M, Degée Ph, Bourbigot S, Delobel R, et al. Polylactyde-based compositions. US Patent 8,119,713 (Materia Nova et al.). 2012.
94. Zhu H., Zhu Q., Li J., Tao K., Xue L., Yan Q. Synergistic effect between expandable graphite and ammonium polyphosphate on flame retarded polylactide. Polym Degrad Stabil 2011, 96:183-189.
95. Katiyar V., Gerds N., Koch C.B., Risbo J., Hansen H.C.B., Plackett D. Poly(L,L-lactide)-layered double hydroxide nanocomposites via in situ polymerization of L,L-lactide. Polym Degrad Stabil 2010, 95:2563-2573.
96. Fan Y., Nishida H., Mori T., Shirai Y., Endo T. Thermal degradation of poly(L,L-lactide): effect of alkali earth metal oxides for selective L,L-lactide formation. Polymer 2004, 45:1197-1205.
97. Fukushima K., Tabuani D., Camino G. Nanocomposites of PLA and PCL based on montmorillonite and sepiolite. Mater Sci Eng C 2009, 29:1433-1441.
98. Marney D.C.O., Russell L.J., Wu D.Y., Nguyen T., Cram D.G., Rigopoulos N., et al. The suitability of halloysite nanotubes as a fire retardant for nylon 6. Polym Degrad Stabil 2008, 93:1971-1978.
99. Özdilek C., Kazimierczak K., Van der Beek D., Picken S.J. Preparation and properties of polyamide-6-boehmite nanocomposites. Polymer 2004, 45:5207-5214.
100. Bourbigot S., Duquesne S. Fire retardant polymers: recent developments and opportunities. J Mater Chem 2007, 17:2283-2300.
101. Nishida H., Fan Y., Mori T., Oyagi N., Shirai Y., Endo T. Feedstock recycling of flame-resisting poly(lactic acid)/aluminum hydroxide composite to L,L-lactide. Ind Eng Chem Res 2005, 44:1433-1437.
102. Bourbigot S., Le Bras M., Leeuwendal R., Shen K.K., Schubert D. Recent advances in the use of zinc borates in flame retardancy of EVA. Polym Degrad Stabil 1999, 64:419-425.
103. Yanagisawa T., Kiuchi Y., Iji M. Enhanced flame retardancy of polylactic acid with aluminum tri-hydroxide and phenolic resins. Kobunshi Ronbunshu 2009, 66:49-54.
104. Kubokawa H., Hatakeyama T. Thermal decomposition behavior of polylactide fabrics treated with flame retardants. Sen'i Gakkaishi 1999, 55:349-355.
105. Kubokawa H., Ohta M., Hatakeyama T. Flame-retarding of polylactide fabrics. Sen'i Gakkaishi 1999, 55:290-297.
106. Kubokawa H., Komatsu H. Flammability and thermal decomposition behavior of polylactide-cellulose union cloths. Sen'i Gakkaishi 2000, 56:497-500.
107. Bourbigot S., Duquesne S., Fontaine G., Bellayer S., Turf T., Samyn F. Characterization and reaction to fire of polymer nanocomposites with and without conventional flame retardants. Mol Cryst Liq Crys 2008, 486:325/[1367]-339/[1381].
108. Kuan C.F., Kuan H.C., Ma C.C.M., Chen C.H. Flame retardancy and nondripping properties of ammonium polyphosphate/poly(butylene succinate) composites enhanced by water crosslinking. J Appl Polym Sci 2006, 102:2935-2945.
109. Jana T., Roy B.C., Maiti S. Biodegradable film: 7. Modification of the biodegradable film for fire retardancy. Polym Degrad Stabil 2000, 69:79-82.
110. Samal R., Sahoo P.K. Development of a biodegradable rice straw-g-poly(methylmethacrylate)/sodium silicate composite flame retardant. J Appl Polym Sci 2009, 113:3710-3715.
111. Bourbigot S., Duquesne S., Jama C. Polymer nanocomposites: how to reach low flammability?. Macromol Symp 2006, 233:180-190.
112. Vandersall H.J. Intumescent coating systems, their development and chemistry. J Fire Flammabl 1971, 2:97-140.
113. Bourbigot S., Le Bras M., Duquesne S., Rochery M. Recent advances for intumescent polymers. Macromol Mater Eng 2004, 289:499-511.
114. Bourbigot S., Le Bras M., Delobel R. Carbonization mechanisms resulting from intumescence association with the ammonium polyphosphate-pentaerythritol fire retardant system. Carbon 1993, 31:1219-1230.
115. Réti C., Casetta M., Duquesne S., Bourbigot S., Delobel R. Flammability properties of intumescent PLA starch and lignin. Polym Adv Technol 2008, 19:628-635.
116. Shumao L., Jie R., Hua Y., Tao Y., Weizhong Y. Influence of ammonium polyphosphate on the flame retardancy and mechanical properties of ramie fiber-reinforced poly(lactic acid) biocomposites. Polym Int 2010, 59:242-248.
117. Zhan J., Song L., Nie S., Hu Y. Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant. Polym Degrad Stabil 2009, 94:291-296.
118. Chen Y., Zhan J., Zhang P., Nie S., Lu H., Song L., et al. Preparation of intumescent flame retardant poly(butylene succinate) using fumed silica as synergistic agent. Ind Eng Chem Res 2010, 49:8200-8208.
119. Fontaine G., Bourbigot S. Intumescent polylactide: a nonflammable material. J Appl Polym Sci 2009, 113:3860-3865.
120. Stewart R. Biopolymers: greater consumer awareness drives growth of biobased-resins market. Plast Eng 2007, 63:24-30.
121. Yu L., Petinakis S., Dean K., Bilyk A., Wu D. Green polymeric blends and composites from renewable resources. Macromol Symp 2007, 249-250:535-539.
122. Cao X., Chang P.R., Huneault M.A. Preparation and properties of plasticized starch modified with poly(ε-caprolactone) based waterborne polyurethane. Carbohyd Polym 2008, 71:119-125.
123. Avérous L., Halley P.J. Biocomposites based on plasticized starch. Biofuel Bioprod Bioref 2009, 3:329-343.
124. Matkó S., Toldy A., Keszei S., Anna P., Bertalan G., Marosi G. Flame retardancy of biodegradable polymers and biocomposites. Polym Degrad Stabil 2005, 88:138-145.
125. Wu K., Hu Y., Song H.L.L., Wang Z. Flame retardancy and thermal degradation of intumescent flame retardant starch-based biodegradable composites. Ind Eng Chem Res 2009, 48:3150-3157.
126. Giraud S., Bourbigot S., Rochery M., Vroman I., Tighzert L., Delobel R. Flame behavior of cotton coated with polyurethane containing microencapsulated flame retardant agent. J Ind Text 2001, 31:11-26.
127. Giraud S., Bourbigot S., Rochery M., Vroman I., Tighzert L., Delobel R., et al. Flame retarded polyurea with microencapsulated ammonium phosphate for textile coating. Polym Degrad Stabil 2005, 88:106-113.
128. Giraud S., Salaün F., Bedek G., Vroman I., Bourbigot S. Influence of chemical shell structure on the thermal properties of microcapsules containing a flame retardant agent. Polym Degrad Stabil 2010, 95:315-319.
129. Bourbigot S., Le Bras M., Delobel R., Decressain R., Amoureux J.P. Synergistic effect of zeolite in an intumescence process: study of the carbonaceous structures using solid-state NMR. J Chem Soc Faraday Trans 1996, 92:149-158.
130. Bourbigot S., Le Bras M., Dabrowski F., Gilman J.W., Kashiwagi T. PA-6 clay nanocomposite hybrid as char forming agent in intumescent formulations. Fire Mater 2000, 24:201-208.
131. Wang D.Y., Leuteritz A., Wang Y.Z., Wagenknecht U., Heinrich G. Preparation and burning behaviors of flame retarding biodegradable poly(lactic acid) nanocomposite based on zinc aluminum layered double hydroxide. Polym Degrad Stabil 2010, 95:2474-2480.
132. Samyn F., Bourbigot S., Jama C., Bellayer S., Nazare S., Hull R., et al. Characterisation of the dispersion in polymer flame retarded nanocomposites. Eur Polym J 2008, 44:1631-1641.
133. Murariu M., Da Silva Ferreira A., Bonnaud L., Dubois Ph Calcium sulfate as high-performance filler for polylactide (PLA) or how to recycle gypsum as by-product of lactic acid fermentation process. Compos Interfaces 2009, 16:65-84.
134. Murariu M., Bonnaud L., Yoann P., Fontaine G., Bourbigot S., Dubois Ph New trends in polylactide (PLA)-based materials: "Green" PLA-calcium sulfate (nano)composites tailored with flame retardant properties. Polym Degrad Stabil 2010, 95:374-381.
135. Bourbigot S., Le Bras M., Bréant P., Trémillon J.M., Delobel R. Zeolites: new synergistic agents for intumescent fire retardant thermoplastic formulations-criteria for the choice of the zeolite. Fire Mater 1996, 20:145-154.
136. 2 nanocomposite. Polym Compos 2008, 29:173-178.
137. Schneider AK. Polylactide sutures. US Patent 3,636,956 (assigned Ethicon, Inc.). 1972.
138. Agrawal A.K., Bhalla R. Advances in the production of poly(lactic acid) fibers. A review. J Macromol Sci C 2003, C43:479-503.
139. Vink E.T.H., Rábago K.R., Glassner D.A., Springs B., O'Connor R.P., Kolstad J., et al. The sustainability of NatureWorks™ polylactide polymers and Ingeo™ polylactide fibers: an update of the future. Macromol Biosci 2004, 4:551-564.
140. Eling B., Gogolewski S., Pennings A.J. Biodegradable materials of poly(L-lactic acid): 1. Melt-spun and solution spun fibers. Polymer 1982, 23:1587-1593.
141. Leenslag J.W., Pennings A.J. High-strength poly(L-Lactide) fibers by a dry-spinning hot-drawing process. Polymer 1987, 28:1695-1702.
142. Postema A.R., Luiten A.H., Oostra H., Pennings A.J. High-strength poly(L-lactide) fibers by a dry-spinning/hot-drawing process. I. Influence of the ambient temperature on the dry-spinning process. J Appl Polym Sci 1990, 39:1265-1274.
143. Schmack G., Tändler B., Vogel R., Beyreuther R., Jacobsen S., Fritz H.G. Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin drawing. J Appl Polym Sci 1999, 73:2785-2797.
144. Schmack G., Jehnichen D., Vogel R., Tändler B., Beyreuther R., Jacobsen S., et al. Biodegradable fibres spun from poly(lactide) generated by reactive extrusion. J Biotechnol 2001, 86:151-160.
145. Schmack G., Tändler B., Optiz G., Vogel R., Komber H., Häubler L., et al. High-speed melt spinning of various grades of polylactides. J Appl Polym Sci 2004, 91:800-806.
146. Mezghani K., Spruiell J.E. High speed melt spinning of poly(L-lactic acid) filaments. J Polym Sci Pol Phys 1998, 36:1005-1012.
147. Fambri L., Pegoretti A., Fenner R., Incardona S.D., Migliaseri C. Biodegradable fibres of poly(L-lactic acid) produced by melt spinning. Polymer 1997, 38:79-85.
148. Cicero J.A., Dorgan J.R., Dec S.F., Knauss D.M. Two-step melt-spun fibers of polylactide. Polym Degrad Stabil 2002, 78:95-105.
149. Cicero J.A., Dorgan J.R., Garrett J., Runt J., Lin J.S. Effects of molecular architecture on two-step, melt spun poly(lactic acid) fibers. J Appl Polym Sci 2002, 86:2839-2846.
150. Yuan X., Mak A.F.T., Kwok K.W., Yung B.K.O., Yao K. Characterization of poly(L-lactic acid) fibers produced by melt spinning. J Appl Polym Sci 2001, 81:251-260.
151. Cicero J.A., Dorgan J.R., Janzen J., Garrett J., Runt J., Lin J.S. Supramolecular morphology of two-step, melt-spun poly(lactic acid) fibers. J Appl Polym Sci 2002, 86:2828-2838.
152. Okuzaki H., Kubota I., Kunugi T. Mechanical properties and structure of the zone-drawn poly(L-lactic acid) fibers. J Polym Sci Polym Phys 1999, 37:991-996.
153. Nishimura Y., Takasu A., Inai Y., Hirabayashi T. Melt spinning of poly(L-lactic acid) and its biodegradability. J Appl Polym Sci 2005, 97:2118-2124.
154. Krikorian V., Pochan D.J. Poly (L-lactic acid)/layered silicate nanocomposite: fabrication, characterization, and properties. Chem Mater 2003, 15:4317-4324.
155. Wu T., Chiang M.F. Fabrication and characterization of biodegradable poly(lactic acid)/layered silicate nanocomposites. Polym Eng Sci 2005, 45:1615-1621.
156. Pluta M., Galeski A., Alexandre M., Paul M.A., Dubois Ph Polylactide/montmorillonite nanocomposites and microcomposites prepared by melt blending: structure and some physical properties. J Appl Polym Sci 2002, 86:1497-1506.
157. Paul M.A., Alexandre M., Degée Ph, Henrist C., Rulmont A., Dubois Ph New nanocomposite materials based on plasticized poly (L-lactide) and organo-modified montmorillonites: thermal and morphological study. Polymer 2003, 44:443-450.
158. Sinha Ray S., Okamoto M. Biodegradable polylactide and its nanocomposites: opening a new dimension for plastics and composites. Macromol Rapid Comm 2003, 24:815-840.
159. Pluta M. Morphology and properties of polylactide modified by thermal treatment, filling with layered silicates and plasticization. Polymer 2004, 45:8239-8259.
160. Nam P.H., Fujimori A., Masuko T. The dispersion behaviour of clay particles in poly(L-lactide)/organo-modified montmorillonite hybrid systems. J Appl Polym Sci 2004, 93:2711-2720.
161. Nam P.H., Kaneko M., Ninomiya N., Fujimori A., Masuko T. Melt intercalation of poly(L-lactide) chains into clay galleries. Polymer 2005, 46:7403-7409.
162. Di Y., Iannace S., Di Maio E., Nicolais L. Poly(lactic acid)/organoclay nanocomposites: thermal, rheological properties and foam processing. J Polym Sci Pol Phys 2005, 43:689-698.
163. Paul M.A., Alexandre M., Degée Ph, Calberg C., Jérôme R., Dubois Ph Exfoliated polylactide/clay nanocomposites by in-situ coordination-insertion polymerization. Macromol Rapid Comm 2003, 24:561-566.
164. Paul M.A., Delcourt C., Alexandre M., Degée Ph, Monteverde F., Rulmont A., et al. (Plasticized) polylactide/(organo-) clay nanocomposites by in situ intercalative polymerization. Macromol Chem Phys 2005, 206:484-498.
165. Martin O., Avérous L. Poly(lactic acid): plasticization and properties of biodegradable multiphase systems. Polymer 2001, 42:6209-6219.
166. Baiardo M., Frisoni G., Scandola M., Rimelen M., Lips D., Ruffieux K., et al. Thermal and mechanical properties of plasticized poly(L-lactic acid). J Appl Polym Sci 2003, 90:1731-1738.
167. Labrecque L.V., Kumar R.A., Dave V., Gross R.A., Mc-Carthy S.P. Citrate esters as plasticizers for poly(lactic acid). J Appl Polym Sci 1997, 66:1507-1513.
168. Jacobsen S., Fritz H.G. Plasticizing polylactide-the effect of different plasticizers on the mechanical properties. Polym Eng Sci 1999, 39:1303-1313.
169. Pillin I., Montrelay N., Grohens Y. Thermo-mechanical characterization of plasticized PLA: is the miscibility the only significant factor?. Polymer 2006, 47:4676-4682.
170. Younes H., Cohn D. Phase separation in poly(ethylene glycol)/poly(lactic acid) blends. Eur Polym J 1988, 24:765-773.
171. Ljungberg N., Wesslen B. The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid). J Appl Polym Sci 2002, 86:1227-1234.
172. Solarski S., Ferreira M., Devaux E. Influence of draw roll temperature on thermal and tensile properties of PLA filaments produced by melt spinning. Chem Fibers Int 2005, 55:180-182.
173. Babraukas V. Tests for flammability of plastics materials for part devices and appliances. Fire Mater 1984, 8:81-95.
174. Thornton W. The role of oxygen to the heat of combustion of organic compounds. Philos Mag 1917, 33:196-205.
175. Huggett C. Estimation of rate of heat release by means of oxygen consumption measurements. Fire Mater 1980, 4:61-65.
176. Walters R.N., Hackett S.M., Lyon R.E. Heats of combustion of high temperature polymers. Fire Mater 2000, 24:245-252.
177. Grayson S.J. Heat release in fire 1992, Elsevier Applied Science Pub., London. V. Babraukas, S.J. Grayson (Eds.).
178. Bourbigot S., Devaux E., Flambard X. Flammability of polyamide-6/clay hybrid nanocomposite textiles. Polym Degrad Stabil 2002, 75:397-402.
179. Gilman J.W. Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites. Appl Clay Sci 1999, 15:31-49.
180. Bellayer S. Développement de nouvelles techniques de caractérisation qualitative et quantitative de nanocomposites à matrice polymère: application au textile [PhD thesis]. Lille University, 2005. (). http://ori.univ-lille1.fr/thematic-search.html?menuKey=these&submenuKey=authors&id=bellayer_severine.