Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications

Materials and Design

Volumn 83, Issue , 2015, Pages 6-13

  de Damborenea, Juan J ^a   Larosa, Maria Aparecida ^b   Arenas, Maria Angeles ^a   Hernández López, Juan Manuel ^a   Jardini, André Luiz ^b   Ierardi, Maria Clara F ^b   Zavaglia, Cecília A C ^b   Filho, Rubens Maciel ^b   Conde, Ana ^a  

^a DEPARTMENT OF PHYSICAL METALLURGY   (Spain)

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

Anodizing; Biomaterials; Corrosion; Laser sintering; Mechanical properties; Scaffolds

Indexed keywords

ANODIC OXIDATION; BIOMATERIALS; CORROSION; CORROSION RATE; LASER HEATING; MECHANICAL PROPERTIES; MEDICAL APPLICATIONS; MEDICAL IMAGING; SCAFFOLDS; SINTERING; TITANIUM; TITANIUM OXIDES;

BIOMEDICAL APPLICATIONS; CORROSION BEHAVIOR; DIRECT METAL LASER SINTERING; ENHANCED PROPERTIES; FUNCTIONALIZATIONS; LASER SINTERING; MECHANICAL AND CORROSION PROPERTIES; TITANIUM OXIDE LAYER;

SCAFFOLDS (BIOLOGY);

EID: 84941308426     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2015.05.078     Document Type: Article

References (56)

1. C.L. Weber, V. Pena, M.K. Micali, E. Yglesias, S.A. Rood, J.A. Scott et al., The role of the national science foundation in the origin and evolution of additive manufacturing in the united states, Institute for Defense Analyses6, 2013, IDA PAPER P-5091.
2. ASTM F2792-12A. Standard Terminology for Additive Manufacturing Technologies, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428.
3. Wong K.V., Hernandez A. A review of additive manufacturing. ISRN Mech. Eng. 2012, 2012:10.
4. Gu D.D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int. Mater. Rev. 2012, 57:133-164.
5. Bourell D.L., Beaman J.J. The history of laser additive manufacturing. LIA Today. 2012, 20:6-7. 2012;20:6-7.
6. Vayre B., Vignat F., Villeneuve F. Metallic additive manufacturing: state-of-the-art review and prospects. Mech. Ind. 2012, 13:89-96.
7. Campbell I., Bourell D., Gibson I. Additive manufacturing: rapid prototyping comes of age. Rapid Prototyping J. 2012, 18:255-258.
8. Yan C., Hao L., Hussein A., Bubb S.L., Young P., Raymont D. Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering. J. Mater. Process. Technol. 2014, 214:856-864.
9. Fernandes de Lima M.S., Sankaré S. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers. Mater. Des. 2014, 55:526-532.
10. Zhu Y., Tian X., Li J., Wang H. Microstructure evolution and layer bands of laser melting deposition Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy. J. Alloys Compd. 2014, 616:468-474.
11. Sahasrabudhe H., Bandyopadhyay A. Laser processing of Fe based bulk amorphous alloy coating on zirconium. Surf. Coat. Technol. 2014, 240:286-292.
12. Jardini A.L., Larosa M.A., Filho R.M., Zavaglia C.Ad.C., Bernardes L.F., Lambert C.S., et al. Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing. J. Cranio-Maxillofacial Surg. 2014, 42:1877-1884.
13. Kurella A., Dahotre N.B. Review paper: surface modification for bioimplants: the role of laser surface engineering. J. Biomater. Appl. 2005, 20:5-50.
14. Wu S., Liu X., Yeung K.W.K., Liu C., Yang X. Biomimetic porous scaffolds for bone tissue engineering. Mater. Sci. Eng.: R: Rep. 2014, 80:1-36.
15. Roy P., Berger S., Schmuki P. TiO2 nanotubes: synthesis and applications. Angew. Chem. Int. Ed. 2011, 50:2904-2939.
16. Liu X., Chu P.K., Ding C. Surface nano-functionalization of biomaterials. Mater. Sci. Eng.: R: Rep. 2010, 70:275-302.
17. Regonini D., Bowen C.R., Jaroenworaluck A., Stevens R. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes. Mater. Sci. Eng.: R: Rep. 2013, 74:377-406.
18. Grimes CA., Mor GK. TiO2 Nanotube Arrays: Synthesis, Properties, and Applications 2009, Springer, pp. 358.
19. Mor G.K., Varghese O.K., Paulose M., Mukherjee N., Grimes C.A. Fabrication of tapered, conical-shaped titania nanotubes. J. Mater. Res. 2003, 18:2588-2593.
20. Varghese O.K., Gong D., Paulose M., Grimes C.A., Dickey E.C. Crystallization and high-temperature structural stability of titanium oxide nanotube arrays. J. Mater. Res. 2003, 18:156-165.
21. Beranek R., Hildebrand H., Schmuki P. Self-organized porous titanium oxide prepared in H2SO4/HF electrolytes. Electrochem. Solid-State Lett. 2003, 6. B12-B4.
22. Macák J.M., Tsuchiya H., Ghicov A., Schmuki P. Dye-sensitized anodic TiO2 nanotubes. Electrochem. Commun. 2005, 7:1133-1137.
23. Balaur E., Macak J.M., Tsuchiya H., Schmuki P. Wetting behaviour of layers of TiO2 nanotubes with different diameters. J. Mater. Chem. 2005, 15:4488-4491.
24. Liu G., Wang K., Hoivik N., Jakobsen H. Progress on free-standing and flow-through TiO2 nanotube membranes. Sol. Energy Mater. Sol. Cells 2012, 98:24-38.
25. Minagar S., Berndt C.C., Wang J., Ivanova E., Wen C. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces. Acta Biomater. 2012, 8:2875-2888.
26. Das K., Bose S., Bandyopadhyay A. TiO2 nanotubes on Ti: influence of nanoscale morphology on bone cell-materials interaction. J. Biomed. Mater. Res. Part A 2009, 90A:225-237.
27. Amin Yavari S., van der Stok J., Chai Y.C., Wauthle R., Tahmasebi Birgani Z., Habibovic P., et al. Bone regeneration performance of surface-treated porous titanium. Biomaterials 2014, 35:6172-6181.
28. Amin Yavari S., Wauthle R., Böttger A.J., Schrooten J., Weinans H., Zadpoor A.A. Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting. Appl. Surf. Sci. 2014, 290:287-294.
29. Truscott M., de Beer D., Vicatos G., Hosking K., Barnard L., Booysen G., et al. Using RP to promote collaborative design of customised medical implants. Rapid Prototyping J. 2007, 13:107-114.
30. N. Volpato, Os principais processos de prototipagem rápida, in: N. Volpato (Ed.), Prototipagem rápida: tecnologias e aplicações São Paulo, Brazil.: Edgard Blücher, 2007, pp. 55-100.
31. Matykina E., Conde A., de Damborenea J., Marero DMy, Arenas M.A. Growth of TiO2-based nanotubes on Ti-6Al-4V alloy. Electrochim. Acta. 2011, 56:9209-9218.
32. Matykina E., Hernandez-López J.M., Conde A., Domingo C., de Damborenea J.J., Arenas M.A. Morphologies of nanostructured TiO2 doped with F on Ti-6Al-4V alloy. Electrochim. Acta. 2011, 56:2221-2229.
33. Pyka G., Kerckhofs G., Papantoniou I., Speirs M., Schrooten J., Wevers M. Surface roughness and morphology customization of additive manufactured open porous Ti6Al4V structures. Materials 2013, 6:4737-4757.
34. Pyka G., Burakowski A., Kerckhofs G., Moesen M., Van Bael S., Schrooten J., et al. Surface modification of Ti6Al4V open porous structures produced by additive manufacturing. Adv. Eng. Mater. 2012, 14:363-370.
35. Balla V.K., Soderlind J., Bose S., Bandyopadhyay A. Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy. J. Mech. Behav. Biomed. Mater. 2014, 32:335-344.
36. Larosa M.A., Jardini A.L., Zavaglia C.A.d.C., Kharmandayan P., Calderoni D.R., Maciel Filho R. Microstructural and mechanical characterization of a custom-built implant manufactured in titanium alloy by direct metal laser sintering. Adv. Mech. Eng. 2014, 6.
37. C. Leyens, M. Peters, Titanium and Titanium Alloys, Fundamentals and Applications, Weinheim: WILEY-VCH Verlag GmbH & Co. KGaA, 2003, pp. 20.
38. Li Y., Yang C., Zhao H., Qu S., Li X., Li Y. New developments of Ti-based alloys for biomedical applications. Materials 2014, 7:1709-1800.
39. Mangano F., Chambrone L., van Noort R., Miller C., Hatton P., Mangano C. Direct metal laser sintering titanium dental implants: a review of the current literature. Int. J. Biomater. 2014, 2014:11.
40. T. Traini, C. Mangano, R.L. Sammons, F. Mangano, A. Macchi, A. Piattelli, Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants, Dental Materials. 24, 1525-1533.
41. Bandyopadhyay A., Espana F., Balla V.K., Bose S., Ohgami Y., Davies N.M. Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants. Acta Biomater. 2010, 6:1640-1648.
42. Lin W., Starr T.L., Harris B.T., Zandinejad A., Morton D. MS additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters. Int. J. Oral Maxillofacial Implants 2013, 28:1490-1495.
43. Rubshtein A.P., Trakhtenberg I.S., Makarova E.B., Triphonova E.B., Bliznets D.G., Yakovenkova L.I., et al. Porous material based on spongy titanium granules: structure, mechanical properties, and osseointegration. Mater. Sci. Eng.: C 2014, 35:363-369.
44. Balla V.K., Bose S., Bandyopadhyay A. Low stiffness porous Ti structures for load-bearing implants. Acta Biomater. 2007, 3:997-1006.
45. Nielsen L.F. Elasticity and damping of porous materials and impregnated materials. J. Am. Cera. Soc. 1984, 67:93-98.
46. Gibson L.J., Ashby M.F. Cellular Solids: Structure and Properties 1988, Pergamon Press, Oxford.
47. Woesz A., Stampfl J., Fratzl P. Cellular solids beyond the apparent density - an experimental assessment of mechanical properties. Adv. Eng. Mater. 2004, 6:134-138.
48. Sercombe T.B., Xu X., Challis V.J., Green R., Yue S., Zhang Z., et al. Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting. Mater. Des. 2015, 67:501-508.
49. Arenas M.A., Pérez-Jorge C., Conde A., Matykina E., Hernández-López J.M., Pérez-Tanoira R., et al. Doped TiO2 anodic layers of enhanced antibacterial properties. Colloids Surf. B: Biointerf. 2013, 105:106-112.
50. Kaczmarek A., Klekiel T., Krasicka-Cydzik E. Fluoride concentration effect on the anodic growth of self-aligned oxide nanotube array on Ti6Al7Nb alloy. Surf. Interf. Anal. 2010, 42:510-514.
51. Acevedo-Peña P., Vázquez G., Laverde D., Pedraza-Rosas J., González I. Influence of structural transformations over the electrochemical behavior of Ti anodic films grown in 0.1M NaOH. J. Solid State Electrochem. 2010, 14:757-767.
52. Alves V.A., Reis R.Q., Santos I.C.B., Souza D.G., de F.Gonçalves T, Pereira-da-Silva M.A., et al. In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti-6Al-4V in simulated body fluid at 25°C and 37°C. Corros. Sci. 2009, 51:2473-2482.
53. Vasilescu C., Drob S.I., Calderon Moreno J.M., Osiceanu P., Popa M., Vasilescu E., et al. Long-term corrosion resistance of new Ti-Ta-Zr alloy in simulated physiological fluids by electrochemical and surface analysis methods. Corros. Sci. 2015, 93:310-323.
54. Virtanen S., Milošev I., Gomez-Barrena E., Trebše R., Salo J., Konttinen Y.T. Special modes of corrosion under physiological and simulated physiological conditions. Acta Biomater. 2008, 4:468-476.
55. R. Schenk, The corrosion properties of titanium and titanium alloys, in: D.M. Brunette PT, M. Textor, P. Thomsen (Eds.), Titanium in Medicine Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer-Verlag, Berlin Heidelberg, 2001, pp. 145-170.
56. Lozano D., Hernández-López J.M., Esbrit P., Arenas M.A., Gómez-Barrena E., de Damborenea J., et al. Influence of the nanostructure of F-doped TiO2 films on osteoblast growth and function. J. Biomed. Mater. Res. Part A 2015, 103:1985-1990.