-
1
-
-
84872707794
-
Perspectives on titanium science and technology
-
D. Banerjee, and J.C. Williams Perspectives on titanium science and technology Acta Mater. 61 2013 844 879
-
(2013)
Acta Mater.
, vol.61
, pp. 844-879
-
-
Banerjee, D.1
Williams, J.C.2
-
4
-
-
74249101491
-
Progress and challenges of laser direct manufacturing of large titanium structural components
-
H.M. Wang, S.Q. Zhang, and X.M. Wang Progress and challenges of laser direct manufacturing of large titanium structural components Chin. J. Lasers 36 2009 3204 3209
-
(2009)
Chin. J. Lasers
, vol.36
, pp. 3204-3209
-
-
Wang, H.M.1
Zhang, S.Q.2
Wang, X.M.3
-
5
-
-
34250355413
-
Progress on rapid solidification laser processing for advanced materials and components
-
H.M. Wang, L.Y. Zhang, A. Li, L.X. Cai, H.B. Tang, and X.D. Lu Progress on rapid solidification laser processing for advanced materials and components World Sci. Technol. R&D 26 2004 27 31
-
(2004)
World Sci. Technol. R&D
, vol.26
, pp. 27-31
-
-
Wang, H.M.1
Zhang, L.Y.2
Li, A.3
Cai, L.X.4
Tang, H.B.5
Lu, X.D.6
-
6
-
-
0034225250
-
The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V
-
P.A. Kobryn, E.H. Moore, and S.L. Semiatin The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V Scr. Mater. 43 2000 299 305
-
(2000)
Scr. Mater.
, vol.43
, pp. 299-305
-
-
Kobryn, P.A.1
Moore, E.H.2
Semiatin, S.L.3
-
7
-
-
0035440411
-
The laser additive manufacture of Ti-6Al-4V
-
P.A. Kobryn, and S.L. Semiatin The laser additive manufacture of Ti-6Al-4V JOM 53 2001 40 42 (Pubitemid 32981908)
-
(2001)
JOM
, vol.53
, Issue.9
, pp. 40-42
-
-
Kobryn, P.A.1
Semiatin, S.L.2
-
8
-
-
84878112571
-
Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
-
C.M. Liu, X.J. Tian, H.B. Tang, and H.M. Wang Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy J. Alloys Comp. 572 2013 17 24
-
(2013)
J. Alloys Comp.
, vol.572
, pp. 17-24
-
-
Liu, C.M.1
Tian, X.J.2
Tang, H.B.3
Wang, H.M.4
-
9
-
-
84890058593
-
Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy
-
Y. Zhu, D. Liu, X. Tian, H. Tang, and H. Wang Characterization of microstructure and mechanical properties of laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy Mater. Des. 56 2014 445 453
-
(2014)
Mater. Des.
, vol.56
, pp. 445-453
-
-
Zhu, Y.1
Liu, D.2
Tian, X.3
Tang, H.4
Wang, H.5
-
10
-
-
84876788533
-
Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition
-
Y. Wang, H. Tang, Y. Fang, and H. Wang Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition Chin. J. Aeronaut. 26 2013 481 486
-
(2013)
Chin. J. Aeronaut.
, vol.26
, pp. 481-486
-
-
Wang, Y.1
Tang, H.2
Fang, Y.3
Wang, H.4
-
11
-
-
27344435090
-
Laser-aided manufacturing technologies; their application to the near-net shape forming of a high-strength titanium alloy
-
DOI 10.1016/j.jmatprotec.2005.05.014, PII S0924013605005534
-
P.L. Blackwell, and A. Wisbey Laser-aided manufacturing technologies; their application to the near-net shape forming of a high-strength titanium alloy J. Mater. Process. Technol. 170 2005 268 276 (Pubitemid 41526175)
-
(2005)
Journal of Materials Processing Technology
, vol.170
, Issue.1-2
, pp. 268-276
-
-
Blackwell, P.L.1
Wisbey, A.2
-
12
-
-
84883620238
-
Microstructure and tensile properties of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
-
C.M. Liu, H.M. Wang, X.J. Tian, H.B. Tang, and D. Liu Microstructure and tensile properties of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy Mater. Sci. Eng., A 586 2013 323 329
-
(2013)
Mater. Sci. Eng., A
, vol.586
, pp. 323-329
-
-
Liu, C.M.1
Wang, H.M.2
Tian, X.J.3
Tang, H.B.4
Liu, D.5
-
13
-
-
78049433701
-
The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V
-
S.S. Al-Bermani, M.L. Blackmore, W. Zhang, and I. Todd The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V Metall. Mater. Trans. A 41 2010 3422 3434
-
(2010)
Metall. Mater. Trans. A
, vol.41
, pp. 3422-3434
-
-
Al-Bermani, S.S.1
Blackmore, M.L.2
Zhang, W.3
Todd, I.4
-
14
-
-
77953810440
-
Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties
-
B. Baufeld, O.V.D. Biest, and R. Gault Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties Mater. Des. 31 Supplement 1 2010 S106 S111
-
(2010)
Mater. Des.
, vol.31
, Issue.SUPPL. 1
-
-
Baufeld, B.1
Biest, O.V.D.2
Gault, R.3
-
15
-
-
84862189089
-
Microstructure of additive layer manufactured Ti-6Al-4V after exceptional post heat treatments
-
E. Brandl, and D. Greitemeier Microstructure of additive layer manufactured Ti-6Al-4V after exceptional post heat treatments Mater. Lett. 81 2012 84 87
-
(2012)
Mater. Lett.
, vol.81
, pp. 84-87
-
-
Brandl, E.1
Greitemeier, D.2
-
16
-
-
3342990111
-
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization
-
S.M. Kelly, and S.L. Kampe Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. microstructural characterization Metall. Mater. Trans. A 35 2004 1861 1867
-
(2004)
Metall. Mater. Trans. A
, vol.35
, pp. 1861-1867
-
-
Kelly, S.M.1
Kampe, S.L.2
-
17
-
-
3343010629
-
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling
-
S.M. Kelly, and S.L. Kampe Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. thermal modeling Metall. Mater. Trans. A 35 2004 1869 1879
-
(2004)
Metall. Mater. Trans. A
, vol.35
, pp. 1869-1879
-
-
Kelly, S.M.1
Kampe, S.L.2
-
18
-
-
41849101484
-
Deposition of Ti-6Al-4V using a high power diode laser and wire, Part I: Investigation on the process characteristics
-
DOI 10.1016/j.surfcoat.2008.02.008, PII S0257897208001047
-
S.H. Mok, G. Bi, J. Folkes, and I. Pashby Deposition of Ti-6Al-4V using a high power diode laser and wire, Part I: investigation on the process characteristics Surf. Coat. Technol. 202 2008 3933 3939 (Pubitemid 351494500)
-
(2008)
Surface and Coatings Technology
, vol.202
, Issue.16
, pp. 3933-3939
-
-
Mok, S.H.1
Bi, G.2
Folkes, J.3
Pashby, I.4
-
19
-
-
34548250907
-
Laser beam build-up welding: Precision in repair, surface cladding, and direct 3D metal deposition
-
DOI 10.1007/s11666-007-9028-5
-
S. Nowotny, S. Scharek, E. Beyer, and K.-H. Richter Laser beam build-up welding: precision in repair, surface cladding, and direct 3D metal deposition J. Therm. Spray Technol. 16 2007 344 348 (Pubitemid 47322401)
-
(2007)
Journal of Thermal Spray Technology
, vol.16
, Issue.3
, pp. 344-348
-
-
Nowotny, S.1
Scharek, S.2
Beyer, E.3
Richter, K.-H.4
-
20
-
-
77950070633
-
A study of the microstructural evolution during selective laser melting of Ti-6Al-4V
-
L. Thijs, F. Verhaeghe, T. Craeghs, J.V. Humbeeck, and J.-P. Kruth A study of the microstructural evolution during selective laser melting of Ti-6Al-4V Acta Mater. 58 2010 3303 3312
-
(2010)
Acta Mater.
, vol.58
, pp. 3303-3312
-
-
Thijs, L.1
Verhaeghe, F.2
Craeghs, T.3
Humbeeck, J.V.4
Kruth, J.-P.5
-
21
-
-
0344704125
-
Microstructures of laser-deposited Ti-6Al-4V
-
DOI 10.1016/j.matdes.2003.09.009
-
X. Wu, J. Liang, J. Mei, C. Mitchell, P.S. Goodwin, and W. Voice Microstructures of laser-deposited Ti-6Al-4V Mater. Des. 25 2004 137 144 (Pubitemid 37515096)
-
(2004)
Materials and Design
, vol.25
, Issue.2
, pp. 137-144
-
-
Wu, X.1
Liang, J.2
Mei, J.3
Mitchell, C.4
Goodwin, P.S.5
Voice, W.6
-
22
-
-
84885515355
-
Effect of heat treatment on microstructure and mechanical properties of laser deposited Ti60A alloy
-
A. Zhang, D. Liu, X. Wu, and H. Wang Effect of heat treatment on microstructure and mechanical properties of laser deposited Ti60A alloy J. Alloys Comp. 585 2014 220 228
-
(2014)
J. Alloys Comp.
, vol.585
, pp. 220-228
-
-
Zhang, A.1
Liu, D.2
Wu, X.3
Wang, H.4
-
23
-
-
84877582096
-
Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V
-
F. Wang, S. Williams, P. Colegrove, and A. Antonysamy Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V Metall. Mater. Trans. A 44 2013 968 977
-
(2013)
Metall. Mater. Trans. A
, vol.44
, pp. 968-977
-
-
Wang, F.1
Williams, S.2
Colegrove, P.3
Antonysamy, A.4
-
24
-
-
84855950080
-
Effect of deposition parameters on mechanical properties of shaped metal deposition parts
-
B. Baufeld Effect of deposition parameters on mechanical properties of shaped metal deposition parts Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 228 2012 126 136
-
(2012)
Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf.
, vol.228
, pp. 126-136
-
-
Baufeld, B.1
-
25
-
-
0037457455
-
Microstructure and texture evolution during solidification processing of Ti-6Al-4V
-
P.A. Kobryn, and S.L. Semiatin Microstructure and texture evolution during solidification processing of Ti-6Al-4V J. Mater. Process. Technol. 135 2003 330 339
-
(2003)
J. Mater. Process. Technol.
, vol.135
, pp. 330-339
-
-
Kobryn, P.A.1
Semiatin, S.L.2
-
26
-
-
84862806817
-
Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V
-
F. Martina, J. Mehnen, S.W. Williams, P. Colegrove, and F. Wang Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V J. Mater. Process. Technol. 212 2012 1377 1386
-
(2012)
J. Mater. Process. Technol.
, vol.212
, pp. 1377-1386
-
-
Martina, F.1
Mehnen, J.2
Williams, S.W.3
Colegrove, P.4
Wang, F.5
-
27
-
-
84901892566
-
Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
-
H. Attar, M. Bönisch, M. Calin, L.-C. Zhang, S. Scudino, and J. Eckert Selective laser melting of in situ titanium-titanium boride composites: processing, microstructure and mechanical properties Acta Mater. 76 2014 13 22
-
(2014)
Acta Mater.
, vol.76
, pp. 13-22
-
-
Attar, H.1
Bönisch, M.2
Calin, M.3
Zhang, L.-C.4
Scudino, S.5
Eckert, J.6
-
28
-
-
79955470631
-
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
-
L.C. Zhang, D. Klemm, J. Eckert, Y.L. Hao, and T.B. Sercombe Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy Scr. Mater. 65 2011 21 24
-
(2011)
Scr. Mater.
, vol.65
, pp. 21-24
-
-
Zhang, L.C.1
Klemm, D.2
Eckert, J.3
Hao, Y.L.4
Sercombe, T.B.5
-
29
-
-
78651354262
-
Thermal expansion and lattice parameters of shaped metal deposited Ti-6Al-4V
-
A.K. Swarnakar, O. Van der Biest, and B. Baufeld Thermal expansion and lattice parameters of shaped metal deposited Ti-6Al-4V J. Alloys Comp. 509 2011 2723 2728
-
(2011)
J. Alloys Comp.
, vol.509
, pp. 2723-2728
-
-
Swarnakar, A.K.1
Van Der Biest, O.2
Baufeld, B.3
-
30
-
-
84862820188
-
Microstructure evolution of sub-critical annealed laser deposited Ti-6Al-4V alloy
-
Y. Lu, H.B. Tang, Y.L. Fang, D. Liu, and H.M. Wang Microstructure evolution of sub-critical annealed laser deposited Ti-6Al-4V alloy Mater. Des. 37 2012 56 63
-
(2012)
Mater. Des.
, vol.37
, pp. 56-63
-
-
Lu, Y.1
Tang, H.B.2
Fang, Y.L.3
Liu, D.4
Wang, H.M.5
|