Long-term corrosion resistance of new Ti-Ta-Zr alloy in simulated physiological fluids by electrochemical and surface analysis methods

Corrosion Science

Volumn 93, Issue , 2015, Pages 310-323

  Vasilescu, C ^a   Drob, S I ^a   Calderon Moreno, J M ^a   Osiceanu, P ^a   Popa, M ^a   Vasilescu, E ^a   Marcu, M ^a   Drob, P ^a  

^a INSTITUTE OF PHYSICAL CHEMISTRY   (Romania)

Author keywords

A. Alloy; B. EIS; B. SEM; B. XPS; C. Passive films

Indexed keywords

CORROSION RESISTANCE; ELECTROCHEMICAL CORROSION; HYDROXYAPATITE; OXIDE FILMS; OXIDE MINERALS; SURFACE ANALYSIS; TANTALUM OXIDES; TERNARY ALLOYS; TITANIUM ALLOYS; TITANIUM DIOXIDE; X RAY PHOTOELECTRON SPECTROSCOPY; ZIRCALOY; ZIRCONIA;

B. EIS; CORROSION CURRENT DENSITIES; DUPLEX OXIDE FILMS; ELECTRICAL PARAMETER; PASSIVE FILMS; POLARISATION RESISTANCES; SIMULATED PHYSIOLOGICAL FLUIDS; SURFACE ANALYSIS METHODS;

TANTALUM ALLOYS;

EID: 84925371594     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2015.01.038     Document Type: Article

References (61)

1. Zysset P.K., Guo X.E., Hoffler C.E., Moore K.E., Goldstein S.A. Mechanical properties of human trabecular bone lamellae quantified by nanoidentation. Tech. Health Care 1998, 6:429-432.
2. Cimpean A., Mitran V., Ciofrangeanu C.M., Galateanu B., Bertrand E., Gordin D.-M., Iordachescu D., Gloriant T. Osteoblast cell behavior on the new beta-type Ti-25Ta-25Nb alloy. Mater. Sci. Eng. C 2012, 32:1554-1563.
3. Banerjee R., Nag S., Stechschulte J., Fraser H.L. Strengthening mechanisms in Ti-Nb-Zr-Ta and Ti-Mo-Zr-Fe orthopaedic alloys. Biomaterials 2004, 25:3413-3419.
4. Tanaka Y., Nakai M., Akahori T., Niinomi M., Tsutsumi Y., Doi H., Hanawa T. Characterization of air-formed surface oxide film on Ti-29Nb-13Ta-4.6Zr alloy surface using XPS and AES. Corros. Sci. 2008, 50:2111-2116.
5. Zhou Y.-L., Niinomi M. Ti-25Ta alloy with the best mechanical compatibility in Ti-Ta alloys for biomedical applications. Mater. Sci. Eng. C 2009, 29:1061-1065.
6. Niinomi M. Recent research and development in titanium alloys for biomedical applications and healthcare goods. Sci. Technol. Adv. Mater. 2003, 4:445-454.
7. Eisenbarth E., Velten D., Muller M., Thull R., Breme J. Biocompatibility of β stabilizing elements of titanium alloys. Biomaterials 2004, 25:5705-5713.
8. Thomsen P., Larsson C., Ericson L.E., Senneby L., Lausama J., Kasemo B. Structure of the interface between rabbit cortical bone and implants of gold, zirconium and titanium. J. Mater. Sci. 1997, 8:653-665.
9. Mareci D., Chelariu R., Gordin D.M., Ungureanu G., Gloriant T. Comparative corrosion study of Ti-Ta alloys for dental application. Acta Biomater. 2009, 5:3625-3629.
10. Khartega M., Raman V., Rajendran N. Influence of potential on the electrochemical behaviour of β titanium alloys in Hank's solution. Acta Biomater. 2007, 3:1019-1023.
11. Mareci D., Sutiman D., Chelariu R., Leon F., Curteanu S. Evaluation of the corrosion resistance of new ZrTi alloys by experiment and simulation with an adaptive instance-based regression model. Corros. Sci. 2013, 73:106-122.
12. Wang B.L., Zheng Y.F., Zhao L.C. Electrochemical corrosion behavior of biomedical Ti-22Nb and Ti-22Nb-6Zr alloys in saline medium. Mater. Corros. 2009, 60:788-794.
13. Pan J., Thierry D., Leygraf C. Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application. Electrochim. Acta 1996, 41:1143-1153.
14. Assis S.L., Wolynec S., Costa I. Corrosion characterization of titanium alloys by electrochemical techniques. Electrochim. Acta 2006, 51:1815-1819.
15. Robin A., Mierelis J.P. Influence of fluoride concentration and pH on corrosion behaviour of Ti-6Al-4V and Ti-23Ta alloys in artificial saliva. Mater. Corros. 2007, 58:173-180.
16. Tsuchiya H., Akaki T., Nakata J., Terada D., Tsuji N., Koizumi Y., Minamino Y., Schmuki P., Fujimoto S. Anodic oxide nanotube layers on Ti-Ta alloys: Substrate composition, microstructure and self-organization on two-size scales. Corros. Sci. 2009, 51:1528-1533.
17. Vulcan A.D., Raducanu D., Cojocaru V.D., Cinca I. The evolution of mechanical characteristics for a thermomechanical processed Ti-Ta-Zr alloy. U.P.B. Sci. Bull. Ser. B 2011, 73:229-236.
18. Wang Z.-W., Li J., Yang H.-X., Tian H.-F., Shi H.-L., Wang Z., Li J.-Q. Superconductivities and structural properties of ternary Ti-Zr-Ta alloys. Chin. Phys. B 2011, 20:ID 117402.
19. Mareci D., Chelariu R., Sutiman D., Gordin D.M., Gloriant T. Evaluating electrochemical behaviour of recrystallized titanium alloys in Ringer's solution. Mater. Corros. 2011, 62:1117-1123.
20. 2. Surf. Interface Anal. 2008, 40:220-224.
21. Van Noort R. The implant material of today. J. Mater. Sci. 1987, 22:3801-3811.
22. Stern M., Makrides A.C. Electrode assembly for electrochemical measurements. J. Electrochem. Soc. 1960, 107:782-783.
23. Saji V.S., Choe H.C. Electrochemical corrosion behaviour of nanotubular Ti-13Nb-13Zr alloy in Ringer's solution. Corros. Sci. 2009, 51:1658-1663.
24. Benea L., Mardare-Danaila E., Mardare M., Celis J.-P. Preparation of titanium oxide and hydroxyapatite on Ti-6Al-4V alloy surface and electrochemical behaviour in bio-simulated fluid solution. Corros. Sci. 2014, 80:331-338.
25. Fojt J., Joska L., Malek J. Corrosion behaviour of porous Ti-39Nb alloy for biomedical applications. Corros. Sci. 2013, 71:78-83.
26. Mareci D., Bolat G., Cailean A., Santana J.J., Izquierdo J., Souto R.M. Effect of acidic fluoride solution on the corrosion resistance of ZrTi alloys for dental implant application. Corros. Sci. 2014, 87:334-343.
27. Cvijovic-Alagic I., Cvijovic Z., Bajat J., Rakin M. Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys. Corros. Sci. 2014, 83:245-254.
28. Mindroiu M., Pirvu C., Ion R., Demetrescu I. Comparing performance of nanoarchitectures fabricated by Ti6Al7Nb anodizing in two kinds of electrolytes. Electrochim. Acta 2010, 56:193-202.
29. Popa M.V., Vasilescu E., Drob P., Vasilescu C., Drob S.I., Mareci D., Mirza Rosca J.C. Corrosion resistance improvement of titanium base alloys. Quim. Nova 2010, 33:1892-1896.
30. Burstein G.T., Souto R.M. Improvement in pitting resistance of stainless steel surfaces by prior anodic treatment in metasilicate solution. J. Electrochem. Soc. 2004, 151:B537-B542.
31. Burstein G.T., Liu C., Souto R.M. The effect of temperature on the nucleation of corrosion pits on titanium in Ringer's physiological solution. Biomaterials 2005, 26:245-256.
32. Burstein G.T. A hundred years of Tafel's equation: 1905-2005. Corros. Sci. 2005, 47:2858-2870.
33. McCafferty E. Validation of corrosion rates measured by the Tafel extrapolation method. Corros. Sci. 2005, 47:3202-3215.
34. Popa M.V., Demetrescu I., Vasilescu E., Drob P., Santana Lopezc A., Mirza-Rosca J., Vasilescu C., Ionita D. Corrosion susceptibility of implant materials Ti-5Al-4V and Ti-6Al-4Fe in artificial extra-cellular fluids. Electrochim. Acta 2004, 49:2113-2119.
35. Moulder J.F., Stickle W.F., Sobol P.E., Bomben K.D. Handbook of X-ray Photoelectron Spectroscopy 1995, Physical Electronics USA, Inc., Chamhassen.
36. A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell, NIST X-ray photoelectron spectroscopy database, NIST standard reference database 20, version 4.1, US Secretary of Commerce on behalf of the United States of America, 2012.
37. Okazaki Y., Rao S., Ito Y., Tateishi T. Corrosion resistance, mechanical properties, corrosion fatigue strength and citocompatibility of new Ti alloys without Al and V. Biomaterials 1998, 19:1197-1215.
38. Pourbaix M. Atlas of Electrochemical Equilibria in Aqueous Solutions 1974, NACE, Houston.
39. Pham M.T., Reuther H., Matz W., Mueller R., Steiner G., Oswald S., Zyganov I. Surface induced reactivity for titanium by ion implantation. J. Mater. Sci.: Mater. Med. 2000, 11:383-391.
40. Park I.S., Choi U.J., Yi H.K., Park B.K., Lee M.H., Bae T.S. Biomimetic apatite formation and biocompatibility on chemically treated Ti-6Al-7Nb alloy. Surf. Interface Anal. 2008, 40:37-42.
41. Li S.J., Yang R., Niinomi M., Hao Y.L., Cui Y.Y. Formation and growth of calcium phosphate on the surface of oxidized Ti-29Nb-13Ta-4.6Zr alloy. Biomaterials 2004, 25:2525-2532.
42. Black J. Biological Performance of Materials: Fundamentals of Biocompatibility 1992, M. Decker Inc., NY.
43. Blackwood D.J., Chua A.W.C., Seah K.H.W., Thampuran R. Corrosion behaviour of porous titanium-graphite composite designed for surgical implants. Corros. Sci. 2000, 42:481-503.
44. 2. J. Electrochem. Soc. 1968, 115:199-203.
45. 2 studied by electrochemical impedance spectroscopy. Corros. Sci. 2001, 43:547-559.
46. Alves V.A., Reis R.Q., Santos I.C.B., Souza D.G., Goncalves T.de F., Pereira-da-Silva M.A., Rossi A., da Silva L.A. In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti-6Al-4V in simulated body fluid at 25°C and 37°C. Corros. Sci. 2009, 51:2473-2482.
47. Lohrengel M.M. Thin anodic oxide layers on aluminium and other valve metals: high field regime. Mater. Sci. Eng. R 1993, 11:243-294.
48. Cremasco A., Osorio W.R., Freire C.M.A., Garcia A., Caram R. Electrochemical corrosion behavior of a Ti-35Nb alloy for medical prostheses. Electrochim. Acta 2008, 53:4867-4874.
49. Robin A., Carvalho O.A.S., Schneider S.G., Schneider S. Corrosion behavior of Ti-xNb-13Zr alloys in Ringer's solution. Mater. Corros. 2008, 59:929-933.
50. Lavos-Valereto I.C., Wolynec S., Ramires I., Guastaldi A.C., Costa I. Electrochemical impedance spectroscopy characterization of passive film formed on implant Ti-6Al-7Nb alloy in Hank's solution. J. Mater. Sci.: Mater. Med. 2004, 15:55-59.
51. Assis S.L., Wolynec S., Costa I. The electrochemical behaviour of Ti-13Nb-13Zr alloy in various solutions. Mater. Corros. 2008, 59:739-743.
52. Assis S.L., Costa I. Electrochemical evaluation of Ti-13Nb-13Zr, Ti-6Al-4V and Ti-6Al-7Nb alloys for biomedical application by long-term immersion tests. Mater. Corros. 2007, 58:329-333.
53. Simka W. Preliminary investigations on the anodic oxidation of Ti-13Nb-13Zr alloy in a solution containing calcium and phosphorous. Electrochim. Acta 2011, 56:9831-9837.
54. Wang C.X., Wang M., Zhou X. Nucleation and growth of apatite on chemically treated titanium alloy: an electrochemical impedance spectroscopy study. Biomaterials 2003, 24:3069-3077.
55. Tamilselvi S., Rajendran N. In vitro corrosion behaviour of Ti-5Al-2Nb-1Ta alloy in Hanks solution. Mater. Corros. 2007, 58:285-289.
56. Tamilselvi S., Raman V., Rajendran N. Corrosion behaviour of Ti-6Al-7Nb and Ti-6Al-4V ELI alloys in simulated fluid solution by electrochemical impedance spectroscopy. Electrochim. Acta 2006, 52:839-846.
57. Rosner B. Fundamentals of Biostatistics 1990, PWS-Kent, Boston Mass. third ed.
58. Wayne V.D. Biostatistics-foundation for Analysis in the Health Science 1996, John Wiley. sixth ed.
59. Blasco-Tamarit E., Igual-Munoz A., Garcia Anton J., Garcia-Garcia D.M. Galvanic corrosion of titanium coupled to welded titanium in LiBr solutions at different temperatures. Corros. Sci. 2009, 51:1095-1102.
60. Sheela G., Ramasamy M., Rao C.R.K., Pushpavanam M. Electrochemical assessment on corrosion behavior of electrochemically joined dissimilar metal joins. Bull. Electrochem. 2001, 17:347-350.
61. Sola C., Amorim A., Espias A., Capelo S., Fernandes J., Proenca L., Sanchez L., Fonseca I. Galvanic corrosion behaviour of Ti and Ti6Al4V coupled to noble dental alloys. Int. J. Electrochem. Sci. 2013, 8:406-420.