Unmodified Starch Granules for Strengthening Mineral-Filled Cellulosic Fiber Networks Promoted by Starch Pretreatment with a Cationic Polymer Flocculant in Combination with the Use of an Anionic Microparticulate Material

ACS Sustainable Chemistry and Engineering

Volumn 3, Issue 8, 2015, Pages 1866-1872

  Fan, Jun ^a   Cao, Yaoyun ^a   Li, Ting ^a   Li, Jinsong ^b   Qian, Xueren ^a   Shen, Jing ^a  

^a NORTHEAST FORESTRY UNIVERSITY   (China)

^b Mudanjiang Hengfeng Paper Co Ltd   (China)

Author keywords

Bentonite; Cationic polyacrylamide; Mineral fillers; Papermaking; Unmodified starch granules

Indexed keywords

BENTONITE; CALCIUM CARBONATE; FILLERS; FLOCCULATION; GRANULATION; MINERALS; PAPERMAKING; POLYMERS; STARCH;

CATIONIC POLYACRYLAMIDES; HIGH MOLECULAR WEIGHT; MICROPARTICLE RETENTION; MINERAL FILLER; MODIFIED BENTONITES; PRECIPITATED CALCIUM CARBONATE FILLERS; STARCH GRANULES; STRENGTH ENHANCEMENT;

FILLED POLYMERS;

FLOCCULANTS; PAPER; POLYMERS;

EID: 84938362822     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/acssuschemeng.5b00469     Document Type: Article

References (52)

1. BeMiller, J. and Whistler, R. Starch: Chemistry and Technology, third ed.; Elsevier, 2009.
2. Baishya, P.; Maji, T. K. Studies on effects of different cross-linkers on the properties of starch-based wood composites ACS Sustainable Chem. Eng. 2014, 2 (7) 1760-1768 10.1021/sc5002325
3. Daudt, R. M.; Külkamp-Guerreiro, I. C.; Cladera-Olivera, F.; Thys, R. C. S.; Marczak, L. D. F. Determination of properties of pinhão starch: Analysis of its applicability as pharmaceutical excipient Ind. Crops Prod. 2014, 52, 420-429 10.1016/j.indcrop.2013.10.052
4. Garcia, P. S.; Grossmann, M. V. E.; Shirai, M. A.; Lazaretti, M. M.; Yamashita, F.; Muller, C. M. O.; Mali, S. Improving action of citric acid as compatibiliser in starch/polyester blown films Ind. Crops Prod. 2014, 52, 305-312 10.1016/j.indcrop.2013.11.001
5. Ghosh Dastidar, T.; Netravali, A. Cross-linked waxy maize starch-based "green" composites ACS Sustainable Chem. Eng. 2013, 1 (12) 1537-1544 10.1021/sc400113a
6. Guimarães, M., Jr.; Botaro, V. R.; Novack, K. M.; Teixeira, F. G.; Tonoli, G. H. D. Starch/PVA-based nanocomposites reinforced with bamboo nanofibrils Ind. Crops Prod. 2015, 70, 72-83 10.1016/j.indcrop.2015.03.014
7. Hernoux-VillieÌre, A.; Lassi, U.; Hu, T.; Paquet, A.; Rinaldi, L.; Cravotto, G.; Molina-Boisseau, S.; Marais, M.-F.; Léveîque, J.-M. Simultaneous microwave/ultrasound-assisted hydrolysis of starch-based industrial waste into reducing sugars ACS Sustainable Chem. Eng. 2013, 1 (5) 995-1002 10.1021/sc4000708
8. Kahrilas, G. A.; Haggren, W.; Read, R. L.; Wally, L. M.; Fredrick, S. J.; Hiskey, M.; Prieto, A. L.; Owens, J. E. Investigation of antibacterial activity by silver nanoparticles prepared by microwave-assisted green syntheses with soluble starch, dextrose, and arabinose ACS Sustainable Chem. Eng. 2014, 2 (4) 590-598 10.1021/sc400487x
9. Wu, D.; Hakkarainen, M. A closed-loop process from microwave-assisted hydrothermal degradation of starch to utilization of the obtained degradation products as starch plasticizers ACS Sustainable Chem. Eng. 2014, 2 (9) 2172-2181 10.1021/sc500355w
10. Bloembergen, S.; McLennan, I.; Lee, D. I.; Van Leeuwen, J. Paper binder performance with biobased nanoparticles Paper360 2008, 3 (8) 46-48
11. Wang, L.; Di, T.; Zhang, Y.; Luo, L.; Zhao, H. Starch-based fixative with proper substitution degree for controlling dissolved and colloidal substances in a bleached chemithermomechanical pulp Starch/Stärke 2014, 66 (11-12) 992-997 10.1002/star.201400033
12. Wildi, R. H.; Egdob, E. V.; Bloembergen, S. Process for Producing Biopolymer Nanoparticles. United States Patent Application 20110042841A1, February 24, 2011.
13. Hii, C.; Gregersen, Ø. W.; Chinga-Carrasco, G.; Eriksen, Ø. The effect of MFC on the pressability and paper properties of TMP and GCC based sheets Nord. Pulp Pap. Res. J. 2012, 27 (2) 388-396 10.3183/NPPRJ-2012-27-02-p388-396
14. Hubbe, M. A. Prospects for maintaining strength of paper and paperboard products while using less forest resources: A review BioResources 2014, 9 (1) 1634-1763 10.15376/biores.9.1.1634-1763
15. Chauhan, V. S.; Bhardwaj, N. K. Cationic starch preflocculated filler for improvement in filler bondability and composite tensile index of paper Ind. Eng. Chem. Res. 2014, 53 (29) 11622-11628 10.1021/ie502008d
16. Deng, Y.; Jones, P.; McLain, L.; Ragauskas, A. J. Starch-modified kaolin fillers for linerboard and paper grades: A perspective review Tappi J. 2010, 9 (4) 31-36
17. El Gendy, A.; Khiari, R.; Bettaieb, F.; Marlin, N.; Dufresne, A. Preparation and application of chemically modified kaolin as fillers in Egyptian kraft bagasse pulp Appl. Clay Sci. 2014, 101, 626-631 10.1016/j.clay.2014.09.032
18. Fatehi, P.; Hamdan, F. C.; Ni, Y. Adsorption of lignocelluloses of pre-hydrolysis liquor on calcium carbonate to induce functional filler Carbohydr. Polym. 2013, 94 (1) 531-538 10.1016/j.carbpol.2013.01.081
19. Gamelas, J. A. F.; Lourenço, A. F.; Xavier, M.; Ferreira, P. J. Modification of precipitated calcium carbonate with cellulose esters and use as filler in papermaking Chem. Eng. Res. Des. 2014, 92 (11) 2425-2430 10.1016/j.cherd.2014.02.003
20. Huang, X.; Qian, X.; Li, J.; Lou, S.; Shen, J. Starch/rosin complexes for improving the interaction of mineral filler particles with cellulosic fibers Carbohydr. Polym. 2015, 117, 78-82 10.1016/j.carbpol.2014.09.047
21. Kretzschmar, J.; Arndt, T.; Erhard, K. Saving paper strength by using composites of filler and cellulosic fibrils Int. Paperworld IPW 2013, 9, 30-32
22. Peng, Y.; He, B.; Zhao, L. Lime mud CaCO3 for use as a filler material in papermaking: Impact of its preflocculation with cationic polyacrylamide J. Appl. Polym. Sci. 2014, 132 (11) 41640 10.1002/app.41640
23. Zhao, Y.; Hu, Z.; Ragauskas, A.; Deng, Y. Improvement of paper properties using starch-modified precipitated calcium carbonate filler Tappi J. 2005, 4 (2) 3-7
24. Huang, X.; Shen, J.; Qian, X. Filler modification for papermaking with starch/oleic acid complexes with the aid of calcium ions Carbohydr. Polym. 2013, 98, 931-935 10.1016/j.carbpol.2013.07.024
25. Johnston, H. A novel approach to improve dry strength. TAPPSA J. 2002. http://www.tappsa.co.za/archive/Journal-papers/A-novel-approach-to-improve-dr/a-novel-approach-to-improve-dr.html.
26. Shen, J.; Song, Z.; Qian, X.; Yang, F. Carboxymethyl cellulose/alum modified precipitated calcium carbonate fillers: Preparation and their use in papermaking Carbohydr. Polym. 2010, 81 (3) 545-553 10.1016/j.carbpol.2010.03.012
27. Xu, R.; Xie, T.-T.; Chen, G.-Q.; Zhang, Y.-L.; Zhou, Z.-Y. Quantitative determination of starch in paper by spectrophotometer China Pulp Paper 2012, 31 (2) 19-22
28. Brouillette, F.; Chabot, B.; Morneau, D.; Daneault, C. Effect of physico-chemical conditions on the properties of zeolite microparticles used in pulp and paper applications Microporous Mesoporous Mater. 2004, 70 (1-3) 51-56 10.1016/j.micromeso.2004.03.001
29. Brouillette, F.; Morneau, D.; Chabot, B.; Daneault, C. A new microparticulate system to improve retention/drainage in fine paper manufacturing Tappi J. 2005, 58 (1) 47-51
30. Cho, B.-U.; Garnier, G.; Van de Ven, T. G. M.; Perrier, M. A deposition efficiency model for fiber-filler flocculation by microparticle retention system J. Ind. Eng. Chem. 2009, 15 (2) 217-223 10.1016/j.jiec.2008.09.020
31. Covarrubias, R. M.; Paracki, J.; Mirza, S. New Advances in Microparticle Retention Technologies Proceedings of the 56th Appita Annual General Conference 2002, 315-321
32. Lee, S. Y.; Hubbe, M. A. Polyelectrolyte titrations of synthetic mineral microparticle suspensions to evaluate charge characteristics Colloids Surf., A 2008, 331 (3) 175-182 10.1016/j.colsurfa.2008.08.003
33. Lee, S. Y.; Hubbe, M. A. Morphologies of synthetic mineral microparticles for papermaking as a function of synthetic conditions Colloids Surf., A 2009, 339 (1-3) 118-125 10.1016/j.colsurfa.2009.02.006
34. Liang, M.; He, B.; Zhao, L. Hydrophobicity of lime sludge filled paper assisted by a cationic starch/CPAM/bentonite retention aids system BioResources 2014, 9 (4) 6440-6452 10.15376/biores.9.4.6440-6452
35. Liu, W.; Ni, Y.; Xiao, H. Cationic montmorillonite: Preparation and synergy with anionic polymer in filler flocculation J. Pulp Pap. Sci. 2003, 29 (5) 145-149
36. Perng, Y.-S.; Wang, E. I. -C.; Chang, C.-K.; Chang, C.-P. Nanosericite as an innovative microparticle in dual-chemical paper retention systems Adv. Mater. Sci. Eng. 2013, 2013, 1-9 10.1155/2013/536961
37. Covarrubias, R. M.; Kessler, B.; Magee, K. Nanotechnology in practice: Improving machine performance in a newsprint mill. Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC), 2004, Volume C, pp 165-170.
38. Gruber, E.; Müller, P. Investigations of the flocculation behavior of microparticle retention systems Proceedings of the 2001 Papermakers Conference 2001, 1, 293-306 10.1023/A:1013719702921
39. Hubbe, M. A. Reversibility of polymer-induced fiber flocculation by shear. 1. Experimental methods Nord. Pulp Pap. Res. J. 2000, 15 (5) 545-553 10.3183/NPPRJ-2000-15-05-p545-553
40. Alince, B.; Bednar, F.; Van de Ven, T. G. M. Deposition of calcium carbonate particles on fiber surfaces induced by cationic polyelectrolyte and bentonite Colloids Surf., A 2001, 190 (1-2) 71-80 10.1016/S0927-7757(01)00666-5
41. Swerin, A.; Öberg, L. Flocculation of cellulosic fibre suspensions by a microparticulate retention aid system consisting of cationic polyacrylamide and anionic montmorillonite: Effect of contact time, shear level and electrolyte concentration Nord. Pulp Pap. Res. J. 1996, 11 (1) 22-29 10.3183/NPPRJ-1996-11-01-p022-029
42. Vanerek, A.; Alince, B.; van de Ven, T. G. M. Bentonite delamination induced by pulp fibers under high shear monitored by calcium carbonate deposition Colloids Surf., A 2006, 280 (1-3) 1-8 10.1016/j.colsurfa.2006.01.014
43. Asselman, T.; Garnier, G. The flocculation mechanism of microparticulate retention aid systems J. Pulp Pap. Sci. 2001, 27 (8) 273-278
44. Antunes, E.; Garcia, F. A. P.; Blanco, A.; Negro, C.; Rasteiro, M. G. Evaluation of the flocculation and reflocculation performance of a system with calcium carbonate, cationic acrylamide co-polymers, and bentonite microparticles Ind. Eng. Chem. Res. 2015, 54 (1) 198-206 10.1021/ie503342d
45. Hubbe, M. A. Mechanistic aspects of microparticle systems Tappi J. 2005, 4 (11) 23-28
46. Hamzeh, Y.; Ashori, A.; Khorasani, Z.; Abdulkhani, A.; Abyaz, A. Pre-extraction of hemicelluloses from bagasse fibers: Effects of dry-strength additives on paper properties Ind. Crops Prod. 2013, 43 (1) 365-371 10.1016/j.indcrop.2012.07.047
47. Liu, J.; Yang, R.; Yang, F. Effect of the starch source on the performance of cationic starches having similar degree of substitution for papermaking using deinked pulp BioResources 2015, 10 (1) 922-931 10.15376/biores.10.1.922-931
48. Gess, J. M. Retention of Fines and Fillers during Papermaking; Tappi Press, 1998.
49. Greenwood, G. Manufacture of Paper. United States Patent 5,876,563 A, March 2, 1999.
50. Perng, Y.-S.; Wang, E. I. -C.; Yeh, C. L. Synergy of bentonite and starch enhances the physical properties of handsheets from recycled pulp Proceeding of the 4th International Conference on Pulping, Papermaking and Biotechnology 2012, 700-703
51. Nelson, K.; Deng, Y. Enhanced bondability between inorganic particles and a polysaccharide substrate by encapsulation with regenerated cellulose J. Appl. Polym. Sci. 2008, 107 (5) 2830-2836 10.1002/app.27398
52. Pruszynski, P. Improved Starch Retention in Paper and Board Production. European Patent 0,936,309 A2, August 18, 1999.