Studies on effects of different cross-linkers on the properties of starch-based wood composites

ACS Sustainable Chemistry and Engineering

Volumn 2, Issue 7, 2014, Pages 1760-1768

  Baishya, Prasanta ^a   Maji, Tarun K ^a  

^a TEZPUR UNIVERSITY   (India)

Author keywords

Dynamic mechanical analysis; Grafting; Hardness; Mechanical properties; Soft wood; Thermal properties; Water soluble polymers

Indexed keywords

DYNAMIC MECHANICAL ANALYSIS; ESTERS; FUNCTIONAL GROUPS; GRAFTING (CHEMICAL); HARDNESS; MECHANICAL PROPERTIES; POLYMERS; SOFTWOODS; STARCH; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS; WOOD PRODUCTS;

BIO-BASED COMPOSITES; CROSSLINKED STRUCTURES; DIMETHYLOLDIHYDROXYETHYLENEUREA; ENGINEERING ASPECTS; LIMITING OXYGEN INDEX; MECHANICAL AND THERMAL PROPERTIES; N-METHYLOL ACRYLAMIDE; WATERSOLUBLE POLYMERS;

CROSSLINKING;

COPOLYMERIZATION; CROSS LINKING; HARDNESS; MECHANICAL PROPERTIES; POLYMERS; SOFTWOODS; STARCH; THERMAL PROPERTIES;

EID: 84903938831     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/sc5002325     Document Type: Conference Paper

References (45)

1. Saheb, D. N.; Jog, J. P. Natural fiber polymer composites: A review Adv. Polymer. Technol. 1999, 18, 351-363
2. Ashori, A. Wood plastic composites as promising green composites for automotive industries Bioresour. Technol. 2008, 99, 4661-4667
3. Li, M. C.; Lee, J. K.; Cho, U. R. Synthesis, characterization, and enzymatic degradation of starch-grafted poly(methyl methacrylate) copolymer films J. Appl. Polym. Sci. 2012, 125, 405-414
4. Liu, H.; Xie, F.; Yu, L.; Chen, L.; Li, L. Thermal processing of starch-based polymers Prog. Polym. Sci. 2009, 34, 1348-1368
5. Zullo, R.; Iannace, S. The effects of different starch sources and plasticizers on film blowing of thermoplastic starch: Correlation among process, elongational properties and macromolecular structure Carbohydrate Polymers Carbohydr. Polym. 2009, 77, 376-383
6. Chang, P. R.; Jian, R.; Zheng, P.; Yu, J.; Ma, X. Preparation and properties of glycerol plasticized-starch (GPS)/cellulose nanoparticle (CN) composites Carbohydr. Polym. 2010, 79, 301-305
7. Mathew, A. P.; Dufresne, A. Morphological investigation of nanocomposites from sorbitol plasticized starch and Tunicin whiskers Biomacromolecules 2011, 3, 609-617
8. Jaymand, M. Exfoliated syndiotactic polystyrene-graft-poly (methyl methacrylate)/ montmorillonite nanocomposite prepared by solvent blending Polym. J. 2011, 43, 901-908
9. Kaewtatip, K.; Tanrattanakul, V. Preparation of cassava starch grafted with polystyrene by suspension polymerization Carbohydr. Polym. 2008, 73, 647-655
10. Ge, X. C.; Xu, Y.; Meng, Y. Z.; Li, R. K. Y. Thermal and mechanical properties of biodegradable composites of poly(propylene carbonate) and starch-poly(methyl acrylate) graft copolymer Compos. Sci. Technol. 2005, 65, 2219-2225
11. Iman, M.; Maji, T. K. Effect of crosslinker and nanoclay on starch and jute fabric based green nanocomposites Carbohydr. Polym. 2012, 89, 290-297
12. Wu, X. S. Effect of glycerin and starch crosslinking on molecular compatibility of biodegradable poly(lactic acid)-starch composites J. Polym. Environ. 2011, 19, 912-917
13. Duanmu, J.; Gamstedt, E. K.; Rosling, A. Synthesis and preparation of crosslinked allylglycidyl ether-modified starch-wood fibre composites Starch/Stärke 2007, 59, 523-532
14. Duanmu, J.; Gamstedt, E. K.; Rosling, A. Hygromechanical properties of composites of crosslinked allylglycidyl-ether modified starch reinforced by wood fibres Compos. Sci. Technol. 2007, 67, 3090-3097
15. Duanmu, J.; Gamstedt, E. K.; Rosling, A. Bulk composites from microfibrillated cellulose-reinforced thermoset starch made from enzymatically degraded allyl glycidyl ether-modified starch J. Compos. Mater. 2012, 46, 3201-3209
16. Duanmu, J.; Gamstedt, E. K.; Pranovich, A.; Rosling, A. Allyloxy-modified starch with low degree of substitution for fiber reinforced thermoset starch composites Compos. Sci. Technol. 2011, 71, 520-527
17. Duanmu, J.; Gamstedt, E. K.; Pranovich, A.; Rosling, A. Studies on mechanical properties of wood fiber reinforced cross-linked starch composites made from enzymatically degraded allylglycidyl ether-modified starch Compos. part A 2010, 41, 1409-1418
18. Pfeffer, A.; Mai, C.; Militz, H. Weathering characteristics of wood treated with water glass, siloxane or DMDHEU Eur. J. Wood. Prod. 2012, 70, 165-176
19. Xie, Y.; Xiao, Z.; Grüneberg, T.; Militz, H.; Hill, C. A. S.; Steuernagel, L.; Mai, C. Effects of chemical modification of wood particles with glutaraldehyde and 1,3-dimethylol-4,5-dihydroxyethyleneurea on properties of the resulting polypropylene composites Compos. Sci. Technol. 2010, 70, 2003-2011
20. Hazarika, A.; Maji, T. K. Effect of different crosslinkers on properties of melamine formaldehyde-furfuryl alcohol copolymer/montmorillonite impregnated softwood (Ficus hispida) Polym. Eng. Sci. 2013, 53, 1394-1404
21. Merdas, I.; Thominette, F.; Tcharkhtchi, A.; Verdu, J. Factors governing water absorption by composite matrices Compos. Sci. Technol. 2002, 62, 487-492
22. Pothan, L. A.; Thomas, S. Effect of hybridization and chemical modification on the water absorption behavior of banana fiber-reinforced polyester composites J. Appl. Polym. Sci. 2004, 91, 3856-3865
23. Bernard, F. North, Treating cellulose textile fabrics with dimethylol dihydroxyethyleneurea-polyol. U.S. Patent 4396391 A, 1983.
24. Yao, W.-H.; Chen, J.-C.; Hu, M.-S.; Teng, M.-Y.; Huang, P.-H.; Lin, J.-M.; Chen, C.-C. Crosslinking of cotton cellulose in the presence of serine and glycine. I. Physical properties and reaction kinetics J. Appl. Polym. Sci. 2005, 97, 595-603
25. Baltieri, R. C.; Innocentini-Mei, L. H.; Tamashiro, W. M. S. C.; Peres, L.; Bittencourt, E. Synthesi of porous macrospheres from amino polymers Eur. Polym. J. 2002, 38, 57-62
26. North, B. F. Treating cellulose textile fabrics with dimethylol dihydroxyethyleneurea-polyol. U.S. Patent, 4,396, 391, August 2, 1983.
27. Angelatos, A. S.; Burgar, M. I.; Dunlop, N.; Separovic, F. NMR structural elucidation of amino resins J. Appl. Polym. Sci. 2004, 91, 3504-3512
28. 13C-NMR analysis method for MF and MUF resins strength and formaldehyde emission from wood particleboard. I. MUF resins J. Appl. Polym. Sci. 1996, 61, 1687-1695
29. 13C NMR study of curing in furfuryl alcohol resins Macromlecules 1984, 17, 1087-1090
30. Cho, Y. W.; Han, S. S.; Ko, S. W. PVA containing chito-oligosaccharide side chain Polymer 2000, 41, 2033-2039
31. Peng, Q. J.; Perlin, A. S. Observations on N.M.R. spectra of starches in dimethyl sulfoxide, iodine-complexing, and solvation in water-di-methyl sulfoxide Carbohydr. Res. 1987, 160, 57-72
32. Gong, Q.; Wang, L. Q.; Tu, K. In situ polymerization of starch with lactic acid in aqueous solution and the microstructure characterization Carbohydr. Polym. 2006, 64, 501-509
33. Fang, Y.; Chen, L.; Chen, S. Facile and quick synthesis of poly(N-methylolacrylamide)/ polyhedral oligomeric silsesquioxane graft copolymer hybrids via frontal polymerization J. Polym. Sci: Part A: Polym. Chem. 2009, 47, 1136-1147
34. Jang, T. R.; Sheu, T. C.; Sheu, J. J.; Chen, C. C. Crosslinking of cotton fabrics premercerized with different alkalis part III: crosslinking and physical properties of DMDHEU-treated fabrics Text. Res. J. 1993, 63, 679-689
35. Deka, B. K.; Maji, T. K. Effect of coupling agent and nanoclay on properties of HDPE, LDPE, PP, PVC blend and Phargamites karka nanocomposite Compos. Sci. Technol. 2010, 70, 1755-1766
36. Awal, A.; Ghosh, S. B.; Sain, M. Thermal properties and spectral characterization of wood pulp reinforced bio-composite fibers J. Therm. Anal. Calorim. 2010, 99, 695-701
37. Deka, B. K.; Mandal, M.; Maji, T. K. Effect of nanoparticles on flammability, UV resistance, biodegradability, and chemical resistance of wood polymer nanocomposite Ind. Eng. Chem. Res. 2012, 51, 11881-11891
38. Luo, X.; Benson, R. S.; Kit, K. M.; Dever, M. Kudzu fiber-reinforced polypropylene composite J. Appl. Polym. Sci. 2002, 85, 1961-1969
39. 2 and nanoclay on the ultraviolet degradation and physical properties of wood polymer nanocomposites Ind. Eng. Chem. Res. 2013, 52, 13536-13546
40. Chui-gen, G.; Yong-ming, S.; Qing-wen, W.; Chang-sheng, S. Dynamic-mechanical analysis and SEM morphology of wood flour/polypropylene composites J. For. Res. 2006, 17, 315-318
41. Hristov, V.; Vasileva, S. Dynamic mechanical and thermal properties of modified poly (propylene) wood fi ber composites Macromol. Mater. Eng. 2003, 288, 798-806
42. Saha, A. K.; Das, S.; Bhatta, D.; Mitra, B. C. Study of jute fiber reinforced polyester composites by dynamic mechanical analysis J. Appl. Polym. Sci. 1999, 71, 1505-1513
43. Devi, R. R.; Maji, T. K. Chemical modification of rubber wood with styrene and glycidyl methacrylate Polym. Compos 2008, 29, 1258-1262
44. Wu, W.; Yang, C. Q. Statistical analysis of the performance of the flame retardant finishing system consisting of a hydroxy-functional organophosphorus oligomer and the mixture of DMDHEU and melamine-formaldehyde resin Polym. Degrad. Stab. 2004, 85, 623-632
45. Yuan, J.; Hu, Y.; Li, L.; Cheng, F. The mechanical strength change of wood modified with DMDHEU Bioresources 2013, 8, 1076-1088