Surface modification induced phase transformation and structure variation on the rapidly solidified recast layer of titanium

Materials Characterization

Volumn 106, Issue , 2015, Pages 463-469

  Tsai, Ming Hung ^a,b   Haung, Chiung Fang ^b,c   Shyu, Shih Shiun ^d   Chou, Yen Ru ^b   Lin, Ming Hong ^a   Peng, Pei Wen ^b   Ou, Keng Liang ^b,e   Yu, Chih Hua ^b  

^a NATIONAL KAOHSIUNG UNIVERSITY OF APPLIED SCIENCES   (Taiwan)

^b TAIPEI MEDICAL UNIVERSITY   (Taiwan)

^c TAIPEI MEDICAL UNIVERSITY HOSPITAL   (Taiwan)

^d Buddist Tzu Chi College of Nursing   (Taiwan)

^e TAIPEI MEDICAL UNIVERSITY   (Taiwan)

Author keywords

Laser surface modification; Microstructure; Phase transformation; Porous structure

Indexed keywords

BIOCOMPATIBILITY; CELL ADHESION; CELLS; MICROSTRUCTURE; OXIDE MINERALS; PHASE TRANSITIONS; RAPID SOLIDIFICATION; SCANNING; SURFACE ROUGHNESS; SURFACE TREATMENT; TITANIUM; VOLCANOES; X RAY DIFFRACTION;

BIOLOGICAL PROPERTIES; INDUCED PHASE TRANSFORMATION; LASER SURFACE MODIFICATION; NANOPOROUS STRUCTURES; POROUS STRUCTURES; POTENTIAL TECHNOLOGIES; STRUCTURE VARIATION; YTTRIUM ORTHOVANADATE;

CYTOLOGY;

EID: 84937883768     PISSN: 10445803     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matchar.2015.06.004     Document Type: Article

References (41)

1. M.C. Chang, C.W. Luo, M.S. Huang, K.L. Ou, L.H. Lin, and H.C. Cheng High-temperature microstructural characteristics of a novel biomedical titanium alloy J. Alloys Compd. 499 2010 171 175
2. P.C.H. Kuo, H.H. Chou, Y.H. Lin, P.W. Peng, K.L. Ou, and W.R. Lee Effects of surface functionalization on the nanostructure and biomechanical properties of binary titanium-niobium alloys J. Electrochem. Soc. 159 2012 E103 E107
3. C.F. Huang, H.C. Cheng, C.M. Liu, C.C. Chen, and K.L. Ou Microstructure and phase transition of biocompatible titanium oxide film on titanium by plasma discharging J. Alloys Compd. 476 2009 683 688
4. J. Lincks, B.D. Boyan, C.R. Blanchard, C.H. Lohmann, Y. Liu, D.L. Cochran, D.D. Dean, and Z. Schwartz Response of MG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition Biomaterials 19 1998 2219 2232
5. M. Long, and H.J. Rack Titanium alloys in total joint replacement - a materials science perspective Biomaterials 19 1998 1621 1639
6. A. Wennerberg, and T. Albrektsson Effects of titanium surface topography on bone integration: a systematic review Clin. Oral Implants Res. 20 Suppl. 4 2009 172 184
7. D. Buser, N. Broggini, M. Wieland, R.K. Schenk, A.J. Denzer, D.L. Cochran, B. Hoffmann, A. Lussi, and S.G. Steinemann Enhanced bone apposition to a chemically modified SLA titanium surface J. Dent. Res. 83 2004 529 533
8. H. Ikeda, P.E. Rossouw, P.M. Campbell, E. Kontogirogos, and P.H. Buschang Three-dimensional analysis of peri-bone-implant contact of rough-surface miniscrew implants Am. J. Orthod. Dentofac. Orthop. 139 2011 e153 e163
9. D.E. MacDonald, B.E. Rapuano, N. Deo, M. Stranick, P. Somasundaran, and A.L. Boskey Thermal and chemical modification of titanium-aluminum-vanadium implant materials: effects on surface properties, glycoprotein adsorption, and MG63 cell attachment Biomaterials 25 2004 3135 3146
10. J.W. Park, H.K. Kim, Y.J. Kim, C.H. An, and T. Hanawa Enhanced osteoconductivity of micro-structured titanium implants (XiVE S CELLplus) by addition of surface calcium chemistry: a histomorphometric study in the rabbit femur Clin. Oral Implants Res. 20 2009 684 690
11. A. Graziano, R. d'Aquino, M.G. Cusella-De Angelis, F. De Francesco, A. Giordano, G. Laino, A. Piattelli, T. Traini, A. De Rosa, and G. Papaccio Scaffold's surface geometry significantly affects human stem cell bone tissue engineering J. Cell. Physiol. 214 2008 166 172
12. H. Kim, S.H. Choi, S.M. Chung, L.H. Li, and I.S. Lee Enhanced bone forming ability of SLA-treated Ti coated with a calcium phosphate thin film formed by e-beam evaporation Biomed. Mater. 5 2010 044106
13. D. Perrin, S. Szmukler-Moncler, C. Echikou, P. Pointaire, and J.-P. Bernard Bone response to alteration of surface topography and surface composition of sandblasted and acid etched (SLA) implants Clin. Oral Implants Res. 13 2002 465 469
14. G. Zhao, Z. Schwartz, M. Wieland, F. Rupp, J. Geis-Gerstorfer, D.L. Cochran, and B.D. Boyan High surface energy enhances cell response to titanium substrate microstructure J. Biomed. Mater. Res. A 74A 2005 49 58
15. S.L. Chen, M.H. Lin, C.C. Chen, and K.L. Ou Effect of electro-discharging on formation of biocompatible layer on implant surface J. Alloys Compd. 456 2008 413 418
16. H.C. Cheng, S.Y. Chiou, C.M. Liu, M.H. Lin, C.C. Chen, and K.L. Ou Effect of plasma energy on enhancing biocompatibility and hemocompatibility of diamond-like carbon film with various titanium concentrations J. Alloys Compd. 477 2009 931 935
17. K.L. Ou, R.J. Chung, F.Y. Tsai, P.Y. Liang, S.W. Huang, and S.Y. Chang Effect of collagen on the mechanical properties of hydroxyapatite coatings J. Mech. Behav. Biomed. Mater. 4 2011 618 624
18. Y.H. Shih, C.T. Lin, C.M. Liu, C.C. Chen, C.S. Chen, and K.L. Ou Effect of nano-titanium hydride on formation of multi-nanoporous TiO2 film on Ti Appl. Surf. Sci. 253 2007 3678 3682
19. I. Watanabe, M. McBride, P. Newton, and K.S. Kurtz Laser surface treatment to improve mechanical properties of cast titanium Dent. Mater. 25 2009 629 633
20. A. Gaggl, G. Schultes, W.D. Muller, and H. Karcher Scanning electron microscopical analysis of laser-treated titanium implant surfaces - a comparative study Biomaterials 21 2000 1067 1073
21. I. Olefjord, and S. Hansson Surface analysis of four dental implant systems Int. J. Oral Maxillofac. Implants 8 1993 32 40
22. J. Gottlow, S. Barkarmo, and L. Sennerby An experimental comparison of two different clinically used implant designs and surfaces Clin. Implant. Dent. Relat. Res. 14 2012 e204 e212
23. K. Das, S. Bose, and A. Bandyopadhyay TiO2 nanotubes on Ti: influence of nanoscale morphology on bone cell-materials interaction J. Biomed. Mater. Res. A 90 2009 225 237
24. D. Berardi, S. De Benedittis, A. Scoccia, G. Perfetti, and P. Conti New laser-treated implant surfaces: a histologic and histomorphometric pilot study in rabbits Clin. Invest. Med. 34 2011 E202
25. C. Mangano, A. Piattelli, M. Raspanti, F. Mangano, A. Cassoni, G. Iezzi, and J.A. Shibli Scanning electron microscopy (SEM) and X-ray dispersive spectrometry evaluation of direct laser metal sintering surface and human bone interface: a case series Lasers Med. Sci. 26 2011 133 138
26. H. Kenar, E. Akman, E. Kacar, A. Demir, H. Park, H. Abdul-Khaliq, C. Aktas, and E. Karaoz Femtosecond laser treatment of 316L improves its surface nanoroughness and carbon content and promotes osseointegration: an in vitro evaluation Colloids Surf. B: Biointerfaces 108 2013 305 312
27. M. Leonhardt, D. Schneider, J. Kaspar, and S. Schenk Characterizing the porosity in thin titanium films by laser-acoustics Surf. Coat. Technol. 185 2004 292 302
28. W.-F. Wu, K.-L. Ou, C.-P. Chou, and C.-C. Wu Effects of nitrogen plasma treatment on tantalum diffusion barriers in copper metallization J. Electrochem. Soc. 150 2003 G83 G89
29. C.-C. Chen, C.-T. Lin, S.-Y. Lee, L.-H. Lin, C.-F. Huang, and K.-L. Ou Biosensing of biophysical characterization by metal-aluminum nitride-metal capacitor Appl. Surf. Sci. 253 2007 5173 5178
30. B. Bhushan, and Y.C. Jung Wetting study of patterned surfaces for superhydrophobicity Ultramicroscopy 107 2007 1033 1041
31. M. Nosonovsky, and B. Bhushan Wetting of rough three-dimensional superhydrophobic surfaces Microsyst. Technol. Micro Nanosyst. -Inf. Storage Process. Syst. 12 2006 273 281
32. R.A. Gittens, T. McLachlan, R. Olivares-Navarrete, Y. Cai, S. Berner, R. Tannenbaum, Z. Schwartz, K.H. Sandhage, and B.D. Boyan The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation Biomaterials 32 2011 3395 3403
33. Y. Liu, L. Enggist, A.F. Kuffer, D. Buser, and E.B. Hunziker The influence of BMP-2 and its mode of delivery on the osteoconductivity of implant surfaces during the early phase of osseointegration Biomaterials 28 2007 2677 2686
34. Q. Yuan, D. Liao, X. Yang, X. Li, N. Wei, Z. Tan, and P. Gong Effect of implant surface microtopography on proliferation, neurotrophin secretion, and gene expression of Schwann cells J. Biomed. Mater. Res. A 93 2010 381 388
35. P.M. Brett, J. Harle, V. Salih, R. Mihoc, I. Olsen, F.H. Jones, and M. Tonetti Roughness response genes in osteoblasts Bone 35 2004 124 133
36. H. Liao, A.-S. Andersson, D. Sutherland, S. Petronis, B. Kasemo, and P. Thomsen Response of rat osteoblast-like cells to microstructured model surfaces in vitro Biomaterials 24 2003 649 654
37. L. Ponsonnet, K. Reybier, N. Jaffrezic, V. Comte, C. Lagneau, M. Lissac, and C. Martelet Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour Mater. Sci. Eng. C 23 2003 551 560
38. Z. Zheng, L. Zhang, L. Kong, A. Wang, Y. Gong, and X. Zhang The behavior of MC3T3-E1 cells on chitosan/poly-l-lysine composite films: effect of nanotopography, surface chemistry, and wettability J. Biomed. Mater. Res. A 89 2009 453 465
39. A. Ranella, M. Barberoglou, S. Bakogianni, C. Fotakis, and E. Stratakis Tuning cell adhesion by controlling the roughness and wettability of 3D micro/nano silicon structures Acta Biomater. 6 2010 2711 2720
40. K.-L. Ou, S.-Y. Chiou, and M.-H. Lin High Cu diffusion resistance in ultrathin multiquasi-amorphous CVD Ti/TiNx films J. Electrochem. Soc. 151 2004 G766 G771
41. H.-C. Cheng, S.-Y. Lee, C.-C. Chen, Y.-C. Shyng, and K.-L. Ou Influence of hydrogen charging on the formation of nanostructural titania by anodizing with cathodic pretreatment J. Electrochem. Soc. 154 2007 E13 E18