Laminar flow through a circular tube having transverse ribs and twisted tapes

Journal of Thermal Science and Engineering Applications

Volumn 7, Issue 4, 2015, Pages

  Tiwari, Manvendra ^a   Saha, Sujoy Kumar ^a  

^a INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY   (India)

Author keywords

Heat transfer enhancement; Integral transverse rib roughness; Laminar forced convection; Swirl flow; Twisted tapes with oblique teeth

Indexed keywords

DUCTS; FRICTION; LAMINAR FLOW; NUSSELT NUMBER;

HEAT TRANSFER ENHANCEMENT; LAMINAR FORCED CONVECTIONS; OBLIQUE TEETH; SWIRL FLOW; TRANSVERSE RIBS;

HEAT TRANSFER;

EID: 84937042797     PISSN: 19485085     EISSN: 19485093     Source Type: Journal    
DOI: 10.1115/1.4030792     Document Type: Article

References (51)

1. Farrell, P., Wert, K., and Webb, R. L., 1991, "Heat Transfer and Friction Characteristics of Turbulator Radiator Tubes," SAE Technical Paper No. 910917.
2. Olsson, C. O., and Sunden, B., 1996, "Heat Transfer and Pressure Drop Characteristics of Ten Radiator Tubes," Int. J. Heat Mass Transfer, 39(15), pp. 3211-3220.
3. Olsson, C. O., and Sunden, B., 1998, "Thermal and Hydraulic Performance of a Rectangular Duct With Multiple V-Shaped Ribs," ASME J. Heat Transfer, 120(4), pp. 1072-1077.
4. Eiamsa-ard, S., and Promvonge, P., 2007, "Heat Transfer Characteristics in a Tube Fitted With Helical Screw-Tape With/Without Core-Rod Inserts," Int. Commun. Heat Mass Transfer, 34(2), pp. 176-185.
5. Date, A. W., 1974, "Prediction of Fully-Developed Flow in a Tube Containing a Twisted-Tape," Int. J. Heat Mass Transfer, 17(8), pp. 845-859.
6. Hong, S. W., and Bergles, A. E., 1976, "Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Twisted-Tape Inserts," ASME J. Heat Transfer, 98(2), pp. 251-256.
7. Saha, S. K., and Dutta, A., 2001, "Thermohydraulic Study of Laminar Swirl Flow Through a Circular Tube Fitted With Twisted Tapes," ASME J. Heat Transfer, 123(3), pp. 417-427.
8. Patil, A. G., 2000, "Laminar Flow Heat Transfer and Pressure Drop Characteristics of Power-Law Fluids Inside Tubes With Varying Width Twisted Tape Inserts," ASME J. Heat Transfer, 122(1), pp. 143-149.
9. Saha, S. K., Gaitonde, U. N., and Date, A. W., 1989, "Heat Transfer and Pressure Drop Characteristics of Laminar Flow in a Circular Tube Fitted With Regularly Spaced Twisted-Tape Elements," Exp. Therm. Fluid Sci., 2(3), pp. 310-322.
10. Date, A. W., and Saha, S. K., 1990, "Numerical Prediction of Laminar Flow in a Tube Fitted With Regularly Spaced Twisted-Tape Elements," Int. J. Heat Fluid Flow, 11(4), pp. 346-354.
11. Li, F., Meindersma, W., de Haan, A. B., and Reith, T., 2005, "Novel Spacers for Mass Transfer Enhancement in Membrane Separations," J. Membr. Sci., 253(1-2), pp. 1-12.
12. Sivashanmugam, P., and Suresh, S., 2006, "Experimental Studies on Heat Transfer and Friction Factor Characteristics of Laminar Flow Through a Circular Tube Fitted With Helical Screw-Tape Inserts," Appl. Therm. Eng., 26(16), pp. 1990-1997.
13. Chang, S., Yu, K. W., and Lu, M., 2005, "Heat Transfer in Tubes Fitted With Single, Twin, and Triple Twisted Tapes," Exp. Therm. Fluid Sci., 18(4), pp. 279-294.
14. Dewan, A., Mahanta, P., Raju, K. S., and Kumar, P. S., 2004, "Review of Passive Heat Transfer Augmentation Techniques," Proc. Inst. Mech. Eng., Part A, 218(7), pp. 509-527.
15. Hong, M., Deng, X., Huang, K., and Li, Z., 2007, "Compound Heat Transfer Enhancement of a Convergent-Divergent Tube With Evenly Spaced Twisted Tapes," Chin. J. Chem. Eng., 15(6), pp. 814-820.
16. Rahimi, M., Shabanian, S. R., and Alsairafi, A. A., 2009, "Experimental and CFD Studies on Heat Transfer and Friction Factor Characteristics of a Tube, Equipped With Modified Twisted-Tape Inserts," Chem. Eng. Process., 48(3), pp. 762-770.
17. Sarac, B. A., and Bali, T., 2007, "An Experimental Study on Heat Transfer and Pressure Drop Characteristics of Decaying Swirl Flow Through a Circular Pipe With a Vortex Generator," Exp. Therm. Fluid Sci., 32(1), pp. 158-165.
18. Jaishankar, S., Radhakrishnan, T. K., and Sheeba, K. N., 2009, "Experimental Studies on Heat Transfer and Friction Factor Characteristics of Thermosyphon Solar Water Heater System Fitted With Spacer at the Trailing Edge of Twisted Tapes," Appl. Therm. Eng., 29(5-6), pp. 1224-1231.
19. Chang, S. W., Su, L. M., Yang, T. L., and Chiou, S. F., 2007, "Enhanced Heat Transfer of Shaker-Bored Piston Cooling Channel With Twisted-Tape Insert," Heat Transfer Eng., 28(4), pp. 321-334.
20. Cazan, R., and Aidun, C. K., 2009, "Experimental Investigation of the Swirling Flow and the Helical Vortices Induced by a Twisted Tape Inside a Circular Pipe," Phys. Fluids, 21(3), p. 037102.
21. Ramakrishna, S., Pathipaka, G., and Sivashanmugam, P., 2009, "Heat Transfer and Pressure Drop Studies in a Circular Tube Fitted With Straight Full Twist," Exp. Therm. Fluid Sci., 33(3), pp. 431-438.
22. Hans, V. S., Saini, R. P., and Saini, J. S., 2009, "Performance of Artificially Roughened Solar Air Heaters-A Review," Renewable Sustainable Energy Rev., 13(8), pp. 1854-1869.
23. Saha, S. K., and Mallick, D. N., 2005, "Heat Transfer and Pressure Drop Characteristics of Laminar Flow in Rectangular and Square Plain Ducts and Ducts With Twisted Tapes," ASME J. Heat Transfer, 127(9), pp. 966-977.
24. Pramanik, D., and Saha, S. K., 2006, "Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Transverse Ribs and Twisted Tapes," ASME J. Heat Transfer, 128(10), pp. 1070-1080.
25. Saha, S. K., 2010, "Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Axial Corrugation Roughness and Twisted Tapes With Oblique Teeth," ASME J. Heat Transfer, 132(8), p. 081701.
26. Pal, P. K., and Saha, S. K., 2010, "Thermal and Friction Characteristics of Laminar Flow Through Square and Rectangular Ducts With Transverse Ribs and Twisted Tapes With and Without Oblique Teeth," J. Enhanced Heat Transfer, 17(1), pp. 1-21.
27. Saha, S. K., 2010, "Thermal and Friction Characteristics of Laminar Flow Through Rectangular and Square Ducts With Transverse Ribs and Wire Coil Inserts," Exp. Therm. Fluid Sci., 34(1), pp. 63-72.
28. Saha, S., and Saha, S. K., 2013, "Enhancement of Heat Transfer of Laminar Flow Through a Circular Tube Having Integral Helical Rib Roughness and Fitted With Wavy Strip Inserts," Exp. Therm. Fluid Sci., 50, pp. 107-113.
29. Saha, S. K., 2012, "Enhanced Heat Transfer," Mechanical Engineering (Encyclopedia of Life Support Systems (EOLSS)), UNESCO-EOLSS Joint Committee, eds., EOLSS Publishers, Oxford, UK.
30. Saha, S., and Saha, S. K., 2013, "Enhancement of Heat Transfer of Laminar Flow of Viscous Oil Through a Circular Tube Having Integral Helical Rib Roughness and Fitted With Helical Screw-Tapes," Exp. Therm. Fluid Sci., 47, pp. 81-89.
31. Bhattacharyya, S., Saha, S., and Saha, S. K., 2013, "Laminar Flow Heat Transfer Enhancement in a Circular Tube Having Integral Transverse Rib Roughness and Fitted With Centre-Cleared Twisted-Tape," Exp. Therm. Fluid Sci., 44, pp. 727-735.
32. Rout, P. K., and Saha, S. K., 2013, "Laminar Flow Heat Transfer and Pressure Drop in a Circular Tube Having Wire-Coil and Helical Screw-Tape Inserts," ASME J. Heat Transfer, 135(2), p. 021901.
33. Saha, S. K., 2013, "Thermohydraulics of Laminar Flow Through a Circular Tube Having Integral Helical Corrugations and Fitted With Helical Screw-Tape Insert," Chem. Eng. Commun., 200(3), pp. 418-436.
34. Saha, S. K., and Dayanidhi, G. L., 2012, "Thermo-Fluid Characteristics of Laminar Flow of Viscous Oil Through a Circular Tube Having Integral Helical Corrugations and Fitted With Centre-Cleared Twisted-Tape," Heat Mass Transfer, 48(12), pp. 2059-2068.
35. Bhattacharyya, S., and Saha, S. K., 2012, "Thermohydraulics of Laminar Flow Through a Circular Tube Having Integral Helical Rib Roughness and Fitted With Centre-Cleared Twisted-Tape," Exp. Therm. Fluid Sci., 42, pp. 154-162.
36. Saha, S. K., Bhattacharyya, S., and Pal, P. K., 2012, "Thermohydraulics of Laminar Flow of Viscous Oil Through a Circular Tube Having Integral Axial Rib Roughness and Fitted With Center-Cleared Twisted-Tape," Exp. Therm. Fluid Sci., 41, pp. 121-129.
37. Saha, S. K., Polley, P. P., and Dayanidhi, G. L., 2012, "Laminar Flow Heat Transfer Enhancement Using Transverse Ribs and Helical Screw-Tape Inserts," J. Thermophys. Heat Transfer, 26(3), pp. 464-471.
38. Saha, S. K., Swain, B. N., and Dayanidhi, G. L., 2012, "Friction and Thermal Characteristics of Laminar Flow of Viscous Oil Through a Circular Tube Having Axial Corrugations and Fitted With Helical Screw-Tape Inserts," ASME J. Fluids Eng., 134(5), p. 051210.
39. Saha, S. K., Barman, B. K., and Banerjee, S., 2012, "Heat Transfer Enhancement of Laminar Flow Through a Circular Tube Having Wire-Coil Inserts and Fitted With Centre-Cleared Twisted-Tape," ASME J. Therm. Sci. Eng. Appl., 4(4), p. 031003.
40. Saha, S. K., Bhattacharyya, S., and Dayanidhi, G. L., 2012, "Enhancement of Heat Transfer of Laminar Flow of Viscous Oil Through a Circular Tube Having Integral Axial Rib Roughness and Fitted With Helical Screw-Tape Inserts," Heat Transfer Res., 43(2), pp. 207-227.
41. Saha, S. K., 2012, "Thermohydraulics of Laminar Flow of Viscous Oil Through a Circular Tube Having Axial Corrugations and Fitted With Centre-Cleared Twisted-Tape," Exp. Therm. Fluid Sci., 38, pp. 201-209.
42. Saha, S. K., 2012, "Heat Transfer, Thermodynamics and Thermal Power Laboratory Description," Int. J. Microscale Nanoscale Therm. Fluid Transp. Phenom., 3(2), pp. 151-156.
43. Saha, S. K., 2011, "Thermohydraulics of Turbulent Flow Through Square and Rectangular Ducts With Transverse Ribs and Twisted Tapes With and Without Oblique Teeth," J. Enhanced Heat Transfer, 18(4), pp. 281-293.
44. Saha, S. K., 2010, "Thermohydraulics of Turbulent Flow Through Rectangular and Square Ducts With Axial Corrugation Roughness and Twisted Tapes With and Without Oblique Teeth," Exp. Therm. Fluid Sci., 34(6), pp. 744-752.
45. Saha, S. K., 2010, "Thermal and Friction Characteristics of Turbulent Flow Through Rectangular and Square Ducts With Transverse Ribs and Wire Coil Inserts," Exp. Therm. Fluid Sci., 34(5), pp. 575-589.
46. Mazumder, A. K., and Saha, S. K., 2008, "Enhancement of Thermohydraulic Performance of Turbulent Flow in Rectangular and Square Ribbed Ducts With Twisted-Tape Inserts," ASME J. Heat Transfer, 130(8), p. 081702.
47. Saha, S. K., and Langille, P., 2002, "Heat Transfer and Pressure Drop Characteristics of Laminar Flow through a Circular Tube With Longitudinal Strip Inserts Under Uniform Wall Heat Flux," ASME J. Heat Transfer, 124(3), pp. 421-432.
48. Saha, S. K., Dutta, A., and Dhal, S. K., 2001, "Friction and Heat Transfer Characteristics of Laminar Swirl Flow Through a Circular Tube Fitted With Twisted Tapes," Int. J. Heat Mass Transfer, 44(22), pp. 4211-4223.
49. Saha, S. K., Gaitonde, U. N., and Date, A. W., 1990, "Heat Transfer and Pressure Drop Characteristics of Turbulent Flow in a Circular Tube Fitted With Regularly Spaced Twisted-Tape Elements," Exp. Therm. Fluid Sci., 3(6), pp. 632-640.
50. Kline, S. J., and McClintock, F. A., 1953, "Describing Uncertainties in Single Sample Experiments," Mech. Eng., 75(1), pp. 3-8.
51. Bergles, A. E., Blumenkrantz, A. R., and Taborek, J., 1974, "Performance Evaluation Criteria for Enhanced Heat Transfer Surfaces," Fifth International Heat Transfer Conference, Tokyo, Vol. 2, pp. 239-243.