Enhancement of thermohydraulic performance of turbulent flow in rectangular and square ribbed ducts with twisted-tape inserts

Journal of Heat Transfer

Volumn 130, Issue 8, 2008, Pages

  Mazumder, Ashis K ^a   Saha, Sujoy K ^a  

^a INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY   (India)

Author keywords

Forced convection; Heat transfer augmentation; Transverse ribs; Turbulent flow; Twisted tape; Uniform wall heat flux

Indexed keywords

AIR; DUCTS; HEAT TRANSFER; HEATING EQUIPMENT; TURBULENCE;

BOUNDARY LAYER SEPARATIONS; EXPERIMENTAL DATUMS; FLOW RECIRCULATION; FRICTION FACTORS; HEAT TRANSFER AUGMENTATION; RIBBED DUCTS; SWIRL FLOWS; TAPE INSERTS; TRANSVERSE RIBS; TWISTED TAPES; TWISTED-TAPE; UNIFORM WALL HEAT FLUX;

TURBULENT FLOW;

EID: 56449113264     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.2909611     Document Type: Conference Paper

References (52)

1. Goldstein, R. J., 1971, "Film Cooling," Advances in Heat Transfer, Academic, New York, Vol. 7, pp. 321-379.
2. Morris, W. D., 1981, Heat Transfer and Fluid Flow in Rotating Coolant Channels, Research Studies, England, pp. 1-228.
3. Elovic, E., and Koffel, W. K., 1983, "Some Considerations in the Thermal Design of Turbine Airfoil Cooling Systems," Int. J. Turbo Jet Engines, 1(1), pp. 45-65.
4. Hennecke, D. K., 1984, "Heat Transfer Problems in Aero-Engines," Heat Transfer and Fluid Flow in Rotating Machinery D. E. Metzger and N. H. Afgan, eds., Hemisphere, Washington, DC, pp. 353-379.
5. Harasgama, S. P., 1995, "Aero-Thermal Aspects of Gas Turbine Flows: Turbine Blading Internal Cooling and External Effects," VKI Lecture Series 1995-05, T. Arts, ed.
6. Han, J. C., and Dutta, S., 1995, "Internal Convection Heat Transfer and Cooling: An Experimental Approach," VKI Lecture Series 1995-05, T. Arts, ed.
7. Lakshminarayana, B., 1996, "Turbine Cooling and Heat Transfer," Fluid Dynamics and Heat Transfer of Turbomachinery, Wiley, New York, Chap. 7, pp. 597-721.
8. Simoneau, R. J., and Simon, F. F., 1993, "Progress Towards Understanding and Predicting Convection Heat Transfer in the Turbine Gas Path," Int. J. Heat Fluid Flow, 142(2), pp. 106-127.
9. Han, J. C., 1988, "Heat Transfer and Friction Characteristics in Rectangular Channels With Rib Turbulators," ASME J. Heat Transfer, 100, pp. 321-328.
10. Park, J. S., Han, J. C., Huang, Y., Ou, S., and Boyle, R. J., 1992, "Heat Transfer Performance Comparisons of Five Different Rectangular Channels With Parallel Angled Ribs," Int. J. Heat Mass Transfer, 35(11), pp. 2891-2903.
11. Han, J. C., Park, J. S., and Lei, C. K., 1989, "Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios With Rib Turbulators," Int. J. Heat Mass Transfer, 32(9), pp. 1619-1630.
12. Han, J. C., and Park, J. S., 1988, "Developing Heat Transfer in Rectangular Channels With Rib Turbulators," Int. J. Heat Mass Transfer, 31(1), pp. 183-195.
13. Webb, R. L., Eckert, E. R. G., and Goldstein, R. J., 1971, "Heat Transfer and Friction in Tubes With Repeated Rib Roughness," Int. J. Heat Mass Transfer, 14(4), pp. 601-617.
14. Taslim, M. E., Li, T., and Spring, S. D., 1997, "Measurements of Heat Transfer Coefficients and Friction Factors in Rib Roughened Channels Simulating Leading Edge Cavities of a Modern Turbine Blade," ASME J. Turbomach., 119, pp. 601-609.
15. Ekkad, S. V., and Han, J. C., 1995, "Local Heat Transfer Measurements Near a Sharp 180° Turns of a Two Pass Smooth Square Channel With a Transient Liquid Crystal Image Technique," J. Flow Visualization Image Process., 2, pp. 285-297.
16. Acharya, S., Dutta, S., Myrum, T. A., and Baker, R. S., 1993, "Periodically Developed Flow and Heat Transfer in a Ribbed Duct," Int. J. Heat Mass Transfer, 36(8), pp. 2069-2082.
17. Acharya, S., Dutta, S., Myrum, T. A., and Baker, R. S., 1994, "Furbulent Flow Past a Surface Mounted Two Dimensional Rib," ASME J. Fluids Eng., 116(2), pp. 238-246.
18. Acharya, S., Myrum, T. A., Qiu, X., and Sinha, S., 1997, "Developing and Periodically Developed Flow, Temperature and Heat Transfer in a Ribbed Duct," Int. J. Heat Mass Transfer, 40(2), pp. 461-479.
19. Ekkad, S. V., and Han, J. C., 1997, "Detailed Heat Transfer Distributions in Two Pass Square Channels With Rib Turbulators," Int. J. Heat Mass Transfer, 40(11), pp. 2525-2537.
20. Ekkad, S. V., Huang, Y., and Han, J. C., 1998, "Detailed Heat Transfer Distributions in Two Pass Smooth and Turbulated Square Channels With Bleed Holes," Int. J. Heat Mass Transfer, 41(13), pp. 3781-3791.
21. Viswanathan, A. K., and Tafti, D. K., 2007, "Investigation of Detached Eddy Simulations in Capturing the Effects of Coriolis Forces and Centrigugal Buoyancy in Ribbed Ducts," ASME J. Heat Transfer, 129(7), pp. 778-789.
22. Saha, A. K., and Acharya, S., 2007, "Furbulent Heat Transfer in Ribbed Cool-ant Passages of Different Aspect Ratios: Parametric Effects," ASME J. Heat Transfer, 129(4), pp. 449-463.
23. Chang, S. W., Lion, T. M., Hung, J. H., and Yeh, W. H., 2007, "Heat Transfer in a Radially Rotating Square-Sectioned Duct With Two Opposite Walls Roughened by 45° Staggered Ribs at High Rotation Numbers," ASME J. Heat Transfer, 129(2), pp. 188-199.
24. Fu, W. L., Wright, L. M., and Han, J. C., 2006, "Rotational Buoyancy Effects on Heat Transfer in Five Different Aspect Ratio Rectangular Channels With Smooth Walls and 45 Degree Ribbed Walls," ASME J. Heat Transfer, 128(11), pp. 1130-1141.
25. Tyagi, M., and Acharya, S., 2005, "Large Eddy Simulations of Flow and Heat Transfer in Rotating Ribbed Duct Flows," ASME J. Heat Transfer, 127(5), pp. 486-498.
26. Wright, L. M., Fu, W. L., and Han, J. C., 2005, "Influence of Entrance Geometry on Heat Transfer in Rotating Rectangular Cooling Channels (AR=4:1) With Angled Ribs," ASME J. Heat Transfer, 127(4), pp. 378-387.
27. Jia, R., Sunden, B., and Faghri, M., 2005, "Computational Analysis of Heat Transfer Enhancement in Square Ducts With V-Shaped Ribs: Turbine Blade Cooling," ASME J. Heat Transfer, 127(4), pp. 425-433.
28. Won, S. Y., Burgess, N. K., Peddicord, S., and Ligrani, P. M., 2004, "Spatially Resolved Surface Heat Transfer for Parallel Rib Turbulators With 45 deg Orientations Including Test Surface Conduction Analysis," ASME J. Heat Transfer, 126(2), pp. 193-201.
29. Mahmood, G. I., Ligrarli, P. M., and Chen, K., 2003, "Variable Property and Temperature Ratio Effects on Nusselt numbers in a Rectangular Channel With 45 deg Angled Rib Turbulators," ASME J. Heat Transfer, 125(5), pp. 769-778.
30. Al-Hadhrami, L., Griffith, T., and Han, J. C., 2003, "Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=2) With Five Different Orientations of 45 deg V-Shaped Rib Turbulators," ASME J. Heat Transfer, 125(2), pp. 232-242.
31. Al-Qahtani, M., Chen, H. C., and Han, J. C., 2003, "A Numerical Study of Flow and Heat Transfer in Rotating Rectangular Channels (AR=4) With 45 deg Rib Turbulators by Reynolds Stress Turbulence Model," ASME J. Heat Transfer, 125(1), pp. 19-26.
32. Griffith, T. S., Al-Hadhrami, L., and Han, J. C., 2002, "Heat Transfer in Rotating Rectangular Cooling Channels (AR=4) With Angled Ribs," ASME J. Heat Transfer, 124(4), pp. 617-625.
33. Murata, A., and Mochizuki, S., 2001, "Large Eddy Simulation of Turbulent Heat Transfer in an Orthogonally Rotating Square Duct With Angled Rib Turbulators," ASME J. Heat Transfer, 123(5), pp. 858-867.
34. Kiml, R., Mochizuki, S., and Murata, A., 2001, "Effects of Rib Arrangements on Heat Transfer and Flow Behaviour in a Rectangular Rib-Roughened Passage: Application to Cooling of Gas Turbine Blade Trailing Edge," ASME J. Heat Transfer, 123(4), pp. 675-681.
35. Jang, Y. J., Chen, H. C., and Han, J. C., 2001, "Computation of Flow and Heat Transfer in Two-Pass Channels With 60 deg Ribs," ASME J. Heat Transfer, 123(3), pp. 563-575.
36. Lin, Y. L., Shih, T. I. P., Stephens, M. A., and Chyu, M. K., 2001, "A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without Rotation," ASME J. Heat Transfer, 123(2), pp. 219-232.
37. Hwang, G. J., Tzeng, S. C., Mao, C. P, and Soong, C. Y., 2001, "Heat Transfer in a Radially Rotating Four-Pass Serpentine Channel With Staggered Half-V Rib Turbulators," ASME J. Heat Transfer, 123(1), pp. 39-50.
38. Acharya, S., Hibbs, R. G., Chen, Y., and Nikitopoulos, D. E., 2000, "Mass/Heat Transfer in a Ribbed Passage With Cylindrical Vortex Generators: The Effect of Generator-Rib Spacing," ASME J. Heat Transfer, 122(4), pp. 641-652.
39. Webb, R. L., Narayanamurthy, R., and Thors, P., 2000, "Heat Transfer and Friction Characteristics of Internal Helical-Rib Roughness," ASME J. Heat Transfer, 122(1), pp. 134-142.
40. Smithberg, E., and Landis, F., 1964, "Friction and Forced Convection Heat Transfer Characteristics in Tubes With Twisted-Tape Swirl Generators," ASME J. Heat Transfer, 86, pp. 39-49.
41. Thorsen, R., and Landis, F., 1968, "Friction and Heat Transfer Characteristics in Turbulent Swirl Flow Subjected to Large Transverse Temperature Gradients," ASME J. Heat Transfer, 90, pp. 87-97.
42. Watanabe, K., Taira, T., and Mori, Y., 1983, "Heat Transfer Augmentation in Tubular Flow by Twisted Tapes at High Temperatures and Optimum Performance," Heat Transfer-Jpn. Res., 12(3), pp. 1-31.
43. Date, A. W., 1973, "Flow in Tubes Containing Twisted Tapes," Heating and Ventilating Engineering, 47, pp. 240-249.
44. Zhuo, N., Ma, Q. L., Zhang, Z. Y., Sun, J. Q., and He, J., 1992, "Friction and Heat Transfer Characteristics in a Tube With a Loose Fitting Twisted-Tape Insert," Multiphase Flow and Heat Transfer, Second International Symposium, X. J. Chen, T. N. Veziroglu, and C. L. Tien, eds., Hemisphere, New York, Vol. 1, pp. 657-661.
45. Kieda, S., Torii, T., and Fujie, K., 1984, "Heat Transfer Enhancement in a Twisted Tube Having a Rectangular Cross Section With or Without Internal Ribs," ASME Paper No. 84-HT-75.
46. Zhang, Y. M., Han, J. C., and Lee, C. P., 1997, "Heat Transfer and Friction Characteristics of Turbulent Flow in Circular Tubes With Twisted-Tape Inserts and Axial Interrupted Ribs," J. Enhanced Heat Transfer, 4, pp. 297-308.
47. Zhang, Y. M., Azad, G. M., Han, J. C., and Lee, C. P., 2000, "Turbulent Heat Transfer Enhancement and Surface Heating Effect in Square Channels With Wavy, and Twisted Tape Inserts With Interrupted Ribs," J. Enhanced Heat Transfer, 7, pp. 35-49.
48. Kline, S. J., and McClintock, F. A., 1953, "Describing Uncertainties in Single Sample Experiments," Mech. Eng. (Am. Soc. Mech. Eng.), 75(1), pp. 3-8.
49. Saha, S. K., and Mallick, D. N., 2005, "Heat Transfer and Pressure Drop Characteristics of Laminar Flow in Rectangular and Square Plain Ducts and Ducts With Twisted-Tape Inserts," ASME J. Heat Transfer, 127, pp. 966-977.
50. Mazumder, A. K., 2005, "Flow and Heat Transfer Characteristics of Turbulent Flow in Rectangular and Square Channels With Rib Turbulators and Twisted Tapes," Ph.D. Thesis, Bengal Engineering and Science University, Shibpur.
51. Saha, S. K., Gaitonde, U. N., and Date, A. W., 1990, "Heat Transfer and Pressure Drop Characteristics of Turbulent Flow in a Circular Tube With Regularly Spaced Twisted-Tape Elements," Exp. Therm. Fluid Sci., 3(6), pp. 632-640.
52. Date, A. W., and Saha, S. K., 1990, "Numerical Prediction of Laminar Flow and Heat Transfer Characteristics in a Tube Fitted With Regularly Spaced Twisted-Tape Elements," Int. J. Heat Fluid Flow, 11(4), pp. 346-354.