Laminar flow heat transfer and pressure drop in a circular tube having wire-coil and helical screw-tape inserts

Journal of Heat Transfer

Volumn 135, Issue 2, 2013, Pages

  Rout, Pratap Kumar ^a   Saha, Sujoy Kumar ^a  

^a INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY   (India)

Author keywords

forced convection; heat transfer enhancement; helical screw tape inserts; laminar flow; swirl flow; wire coil inserts

Indexed keywords

BUOYANCY FORCES; CIRCULAR DUCTS; CIRCULAR TUBES; DUCT WALLS; ENHANCEMENT TECHNIQUES; FIN PARAMETERS; FRICTION FACTORS; GRAETZ NUMBER; HEAT TRANSFER AND PRESSURE DROP; HEAT TRANSFER ENHANCEMENT; INERTIA FORCE; LOCAL NUSSELT NUMBER; LOCAL TEMPERATURE; LOW REYNOLDS NUMBER; NUSSELT NUMBER CORRELATION; RAYLEIGH NUMBER; SWIRL FLOW; TEMPERATURE DROPS; THERMAL DEVELOPMENT; THERMOHYDRAULIC PERFORMANCE; WALL TEMPERATURES;

DUCTS; FORCED CONVECTION; LAMINAR FLOW; NUSSELT NUMBER; REGRESSION ANALYSIS; REYNOLDS NUMBER; SCREWS; TUBES (COMPONENTS);

WIRE;

EID: 84872021171     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.4007415     Document Type: Article

References (33)

1. Edwards, F. J., and Sheriff, N., 1961, "The Heat Transfer and Friction Characteristics for Forced Convection Air Flow Over a Particular Type of Rough Surface," International Developments in Heat Transfer, ASME, New York, pp. 415-425.
2. Emerson, W. H., 1961, "Heat Transfer in a Duct in Regions of Separated Flow," Proceedings of the Second International Heat Transfer Conference, Colorado, Vol. 1, pp. 267-275.
3. Uttawar, S. B., and Raja Rao, M., 1985, "Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Wire Coil Inserts," ASME J. Heat Transfer, 106, pp. 467-469.
4. Chen, L., and Zhang, H. J., 1993, "Convection Heat Transfer Enhancement of Oil in a Circular Tube With Spiral Spring Inserts," Heat Transfer Measurements and Analysis, HTD-ASME Symposium, L. C. Chow and A. F. Emery, eds., Vol. 249, pp. 45-50.
5. Eiamsa-ard, S., and Promvonge, P., 2007, "Heat Transfer Characteristics in a Tube Fitted With Helical Screw-Tape With/Without Core-Rod Inserts," Int. Commun. Heat Mass Transfer, 34(2), pp. 176-185.
6. Date, A. W., 1974, "Prediction of Fully-Developed Flow in a Tube Containing a Twisted-Tape," Int. J. Heat Mass Transfer, 17, pp. 845-859.
7. Hong, S. W., and Bergles, A. E., 1976, "Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Twisted-Tape Inserts," ASME J. Heat Transfer, 98, pp. 251-256.
8. Saha, S. K., and Dutta, A., 2001, "Thermohydraulic Study of Laminar Swirl Flow Through a Circular Tube Fitted With Twisted Tapes," ASME J. Heat Transfer, 123, pp. 417-427.
9. Patil, A. G., 2000, "Laminar Flow Heat Transfer and Pressure Drop Characteristics of Power-Law Fluids Inside Tubes With Varying Width Twisted Tape Inserts," ASME J. Heat Transfer, 122, pp. 143-149.
10. Saha, S. K., Gaitonde, U. N., and Date, A. W., 1989, "Heat Transfer and Pressure Drop Characteristics of Laminar Flow in a Circular Tube Fitted With Regularly Spaced Twisted-Tape Elements," Exp. Therm. Fluid Sci., 2, pp. 310-322.
11. Date, A. W., and Saha, S. K., 1990, "Numerical Prediction of Laminar Flow in a Tube Fitted With Regularly Spaced Twisted-Tape Elements," Int. J. Heat Fluid Flow, 11(4), pp. 346-354.
12. Li, F., Meindersma, W., de Haan, A. B., and Reith, T., 2005, "Novel Spacers for Mass Transfer Enhancement in Membrane Separations," J. Membr. Sci., 253(1-2), pp. 1-12.
13. Sivashanmugam, P., and Suresh, S., 2006, "Experimental Studies on Heat Transfer and Friction Factor Characteristics of Laminar Flow Through a Circular Tube Fitted With Helical Screw-Tape Inserts," Appl. Therm. Eng., 26(16), pp. 1990-1997.
14. Chang, S., Yu, K. W., and Lu, M., 2005, "Heat Transfers in Tubes Fitted With Single, Twin, and Triple Twisted Tapes," Exp. Heat Transfer, 18(4), pp. 279-294.
15. Dewan, A., Mahanta, P., Raju, K. S., and Kumar, P. S., 2004, "Review of Passive Heat Transfer Augmentation Techniques," Proc. Inst. Mech. Eng., Part A, 218(7), pp. 509-527.
16. Hong, M., Deng, X., Huang, K., and Li, Z., 2007, "Compound Heat Transfer Enhancement of a Convergent-Divergent Tube With Evenly Spaced Twisted Tapes," Chin. J. Chem. Eng., 15(6), pp. 814-820.
17. Rahimi, M., Shabanian, S. R., and Alsairafi, A. A., 2009, "Experimental and CFD Studies on Heat Transfer and Friction Factor Characteristics of a Tube, Equipped With Modified Twisted-Tape Inserts," Chem. Eng. Process.: Process Intensification, 48(3), pp. 762-770.
18. Sarac, B. A., and Bali, T., 2007, "An Experimental Study on Heat Transfer and Pressure Drop Characteristics of Decaying Swirl Flow Through a Circular Pipe With a Vortex Generator," Exp. Therm. Fluid Sci., 32(1), pp. 158-165.
19. Jaisankar, S., Radhakrishnan, T. K., and Sheeba, K. N., 2009, "Experimental Studies on Heat Transfer and Friction Factor Characteristics of Thermosyphon Solar Water Heater System Fitted With Spacer at the Trailing Edge of Twisted Tapes," Appl. Therm. Eng., 29(5-6), pp. 1224-1231.
20. Chang, S. W., Su, L. M., Yang, T. L., and Chiou, S. F., 2007, "Enhanced Heat Transfer of Shaker-Bored Piston Cooling Channel With Twisted-Tape Insert," Heat Transfer Eng., 28(4), pp. 321-334.
21. Cazan, R., and Aidun, C. K., 2009, "Experimental Investigation of the Swirling Flow and the Helical Vortices Induced by a Twisted Tape Inside a Circular Pipe," Phys. Fluids, 21, p. 037102.
22. Krishna, S. R., Pathipaka, G., and Sivashanmugam, P., 2009, "Heat Transfer and Pressure Drop Studies in a Circular Tube Fitted With Straight Full Twist," Exp. Therm. Fluid Sci., 33(3), pp. 431-438.
23. Hans, V. S., Saini, R. P., and Saini, J. S., 2009, "Performance of Artificially Roughened Solar Air Heaters-A Review," Renewable Sustainable Energy Rev., 13(8), pp. 1854-1869.
24. Saha, S. K., and Mallick, D. N., 2005, "Heat Transfer and Pressure Drop Characteristics of Laminar Flow in Rectangular and Square Plain Ducts and Ducts With Twisted Tapes," ASME J. Heat Transfer, 127(9), pp. 966-977.
25. Pramanik, D., and Saha, S. K., 2006, "Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Transverse Ribs and Twisted Tapes," ASME J. Heat Transfer, 128(10), pp. 1070-1080.
26. Saha, S. K., 2010, "Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Axial Corrugation Roughness and Twisted Tapes With Oblique Teeth," ASME J. Heat Transfer, 132(8), p. 081701.
27. Pal, P. K., and Saha, S. K., 2010, "Thermal and Friction Characteristics of Laminar Flow Through Square and Rectangular Ducts With Transverse Ribs and Twisted Tapes With and Without Oblique Teeth," J. Enhanced Heat Transfer, 17(1), pp. 1-21.
28. Saha, S. K., 2010, "Thermal and Friction Characteristics of Laminar Flow Through Rectangular and Square Ducts With Transverse Ribs and Wire Coil Inserts," Exp. Therm. Fluid Sci., 34(1), pp. 63-72.
29. Hasim, F., Yoshida, M., and Miyashita, H., 2003, "Compound Heat Transfer Enhancement by a Combination of a Helically Ribbed Tube With Twisted Tape Inserts," J. Chem. Eng. Jpn., 35(9), pp. 1116-1122.
30. Zimparov, V. D., Penchev, P. J., and Bergles, A. E., 2006, "Performance Characteristics of Some 'Rough Surfaces' With Tube Inserts for Single-Phase Flow," J. Enhanced Heat Transfer, 13(2), pp. 117-137.
31. Kline, S. J., and McClintock, F. A., 1953, "Describing Uncertainties in Single Sample Experiments," Mech. Eng., 75(1), pp. 3-8.
32. Manglik, R. M., and Bergles, A. E., 1993, "Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part I-Laminar Flows," ASME J. Heat Transfer, 115(4), pp. 881-889.
33. Bergles, A. E., Blumenkrantz, A. R., and Taborek, J., 1974, "Performance Evaluation Criteria for Enhanced Heat Transfer Surfaces," Proceedings of 5th International Heat Transfer Conference, Tokyo, Vol. 2, pp. 239-243, Paper FC 6.3.