Fabrication of co-continuous poly(ε-caprolactone)/polyglycolide blend scaffolds for tissue engineering

Journal of Applied Polymer Science

Volumn 132, Issue 35, 2015, Pages

  Allaf, Rula M ^a   Rivero, Iris V ^b   Ivanov, Ilia N ^c  

^a GERMAN JORDANIAN UNIVERSITY   (Jordan)

^b Iowa State University of Science and Technology   (United States)

^c OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

biodegradable; blends; porous materials; properties and characterization; synthesis and processing

Indexed keywords

BIOMECHANICS; BLENDING; COMPRESSION MOLDING; DEGRADATION; ETHYLENE; FABRICATION; POLYETHYLENE OXIDES; POLYMER BLENDS; PORE SIZE; POROUS MATERIALS; TISSUE;

BIODEGRADABLE; CO-CONTINUOUS MORPHOLOGY; HIGH MECHANICAL PROPERTIES; POLY (EPSILONCAPROLACTONE); POLY (ETHYLENE OXIDE) (PEO); SCAFFOLDS FOR TISSUE ENGINEERING; SYNTHESIS AND PROCESSING; TISSUE ENGINEERING SCAFFOLD;

SCAFFOLDS (BIOLOGY);

EID: 84933183173     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.42471     Document Type: Article

References (55)

1. Ikada, Y., J. Roy. Soc. Interface 2006, 3, 589.
2. Wu, S.,;, Liu, X.,;, Yeung, K. W.,;, Liu, C.,;, Yang, X., Mat. Sci. Eng. R 2014, 80, 1.
3. Lu, H.,;, Hoshiba, T.,;, Kawazoe, N.,;, Chen, G., Biomaterials 2011, 32 (10), 2489.
4. Chung, C.,;, Burdick, J. A., Adv. Drug Deliver. Rev. 2008, 60, 243.
5. Vial, X.,;, Andreopoulos, F. M., Curr. Rheumatol. Rev. 2009, 5, 51.
6. Puppi, D.,;, Chiellini, F.,;, Piras, A. M.,;, Chiellini, E., Prog. Polym. Sci. 2010, 35 (4), 403.
7. Liu, Y.,;, Lim, J.,;, Teoh, S. H., Biotechnol. Adv. 2013, 31 (5), 688.
8. Chen, B. Y.,;, Wang, Y. S.,;, Mi, H. Y.,;, Yu, P.,;, Kuang, T. R.,;, Peng, X. F.,;, Wen, J. S., J. Appl. Polym. Sci. 2014. DOI: 10.1002/A41181.
9. Vertuccio, L.,;, Gorrasi, G.,;, Sorrentino, A.,;, Vittoria, V., Carbohyd. Polym. 2009, 75, 172.
10. Gabay, O.,;, Sanchez, C.,;, Taboas, J. M., Joint Bone Spine 2010, 77 (4), 283.
11. Bramfeldt, H.,;, Sarazin, P.,;, Vermette, P., Polym. Degrad. Stab. 2008, 93, 877.
12. Aghdam, R. M.,;, Najarian, S.,;, Shakhesi, S.,;, Khanlari, S.,;, Shaabani, K.,;, Sharifi, S., J. Appl. Polym. Sci. 2012, 124 (1), 123.
13. Schindler, C.,;, Williams, B. L.,;, Patel, H. N.,;, Thomas, V.,;, Dean, D. R., Polymer 2013, 54, 6824.
14. Washburn, N. R.,;, Simon, C. G.,;, Tona, A.,;, Elgendy, H. M.,;, Karim, A.,;, Amis, E. J., J. Biomed. Mater. Res. 2002, 60 (1), 20.
15. Sarazin, P.,;, Favis, B. D., Biomacromolecules 2003, 4, 1669.
16. Reignier, J.,;, Huneault, M. A., Polymer 2006, 47, 4703.
17. Sarazin, P.,;, Roy, X.,;, Favis, B. D., Biomaterials 2004, 25, 5965.
18. Pötschke, P.,;, Paul, D. R., Polym. Rev. 2003, 43 (1), 87.
19. Allaf, R. M.,;, Rivero, I. V., J. Mater. Sci. Mater. M. 2011, 22, 1843.
20. Allaf, R. M.,;, Rivero, I. V.,;, Abidi, N.,;, Ivanov, I. N., J. Biomed. Mater. Res. B 2013, 101 (6), 1050.
21. Chiono, V.,;, Vozzi, G.,;, D'Acunto, M.,;, Brinzi, S.,;, Domenici, C.,;, Vozzi, F.,;, Ahluwalia, A.,;, Barbani, N.,;, Giusti, P.,;, Ciardelli, G., Mater. Sci. Eng. C 2009, 29, 2174.
22. Doppalapudi, S.,;, Jain, A.,;, Khan, W.,;, Domb, A., J. Polym. Adv. Technol. 2014, 25 (5), 427.
23. Nair, L. S.,;, Laurencin, C. T., Prog. Polym. Sci. 2007, 32, 762.
24. Ishaug-Riley, S. L.,;, Okun, L. E.,;, Prado, G.,;, Applegate, M. A.,;, Ratcliffe, A., Biomaterials 1999, 20, 2245.
25. Tan, L.,;, Yu, X.,;, Wan, P.,;, Yang, K., J. Mater. Sci. Technol. 2013, 29 (6), 503.
26. Okamoto, M.,;, John, B., Prog. Polym. Sci. 2013, 38, 1487.
27. Eastmond, G. C., In Advances in Polymer Science: Biomedical Applications/Polymer Blends; Springer Berlin-Heidelberg: New York, 2000, vol. 149, 59.
28. Stranz, M.,;, Köster, U.,;, Katzenberg, F., J. Metastab. Nanocryst. Mater. 2005, 24, 609.
29. Zhu, Y. G.,;, Li, Z. Q.,;, Zhang, D.,;, Tanimoto, T., J. Appl. Polym. Sci. 2006, 99 (2), 501.
30. Zhu, Y. G.,;, Li, Z. Q.,;, Zhang, D.,;, Tanimoto, T., J. Polym. Sci. B 2006, 44 (8), 1161.
31. Vertuccio, L.,;, Gorrasi, G.,;, Sorrentino, A.,;, Vittoria, V., Carbohyd. Polym. 2009, 75 (1), 172.
32. Jonnalagadda, J.,;, Rivero, I. V.;, J. Mech. Behav. Biomed. Mater. 2014, 40, 33.
33. Jonnalagadda, J. B.,;, Rivero, I. V.,;, Dertien, J. S., J. Biomat. Sci.-Polym. Ed. 2015, 26 (7), 401.
34. Lebourg, M.,;, Serra, R. S.,;, Estellés, J. M.,;, Sánchez, F. H.,;, Ribelles, J. G.,;, Antõn, J. S., J. Mater. Sci. Mater. M. 2008, 19 (5), 2047.
35. Ghosh, S.,;, Viana, J. C.,;, Reis, R. L.,;, Mano, J. F., J. Mater. Sci. Mater. M. 2007, 18, 185.
36. Sarazin, P.,;, Virgilio, N.,;, Favis, B. D., J. Appl. Polym. Sci. 2006, 100 (2), 1039.
37. Bureau, M. N., In Thermoplastic Foam Processing: Principles and Development;, Gendron, R., Ed.; CRC Press: Boca Raton, 2005, 235.
38. Test Method for Compressive Properties of Rigid Plastics, ASTM Standard D 695-08, 2008.
39. Andrady, A. L., In Physical Properties of Polymers Handbook;, Mark, J. E., Ed.; Springer: New York, 2007, 951.
40. Zhao, J.,;, Yuan, X.,;, Cui, Y.,;, Ge, Q.,;, Yao, K., J. Appl. Polym. Sci. 2004, 91 (3), 1676.
41. Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70% Glycolide, ASTM Standard F 2313-08, 2008.
42. Thadavirul, N.,;, Pavasant, P.,;, Supaphol, P., J. Biomed. Mater. Res. A 2013, DOI: 10.1002/jbm.a.35010.
43. Wan, Y.,;, Chen, W.,;, Yang, J.,;, Bei, J.,;, Wang, S., Biomaterials 2003, 24 (13), 2195.
44. Oh, S. H.,;, Kang, S. G.,;, Kim, E. S.,;, Cho, S. H.,;, Lee, J. H., Biomaterials 2003, 24 (22), 4011.
45. Lee, C. T.,;, Huang, C. P.,;, Lee, Y. D., Biomacromolecules 2006, 7, 2200.
46. Maglio, G.,;, Malinconico, M.,;, Migliozzi, A.,;, Groeninckx, G., Macromol. Chem. Physic. 2004, 205 (7), 946.
47. Correlo, V. M.,;, Boesel, L. F.,;, Pinho, E.,;, Costa-Pinto, A. R.,;, Alves da Silva, M. L.,;, Bhattacharya, M.,;, Mano, J. F.,;, Neves, N. M.,;, Reis, R. L., J. Biomed. Mater. Res. A 2009, 91 (2), 489.
48. Mills, N. J., Polymer Foams Handbook: Engineering and Biomechanics Applications and Design Guide; Elsevier-Butterworth-Heinemann: Burlington, 2007.
49. Varga, F.,;, Drzik, M.,;, Handl, M.,;, Chlpik, J.,;, Kos, P.,;, Filová, E.,;, Rampichova, M.,;, Necas, A.,;, Trc, T.,;, Amler, E., Physiol. Res. 2007, 56 (Suppl 1), S61.
50. Sabir, M. I.,;, Xu, X.,;, Li, L. J., Mater. Sci. 2009, 44, 5713.
51. Menczel, J. D.,;, Judovits, L.,;, Prime, R. B.,;, Bair, H. E.,;, Reading, M.,;, Swier, S., In Thermal analysis of polymers: fundamentals and applications;, Menczel, J. D.,;, Prime, R. B., Eds.; John Wiley & Sons: Hoboken, New Jersey, 2009, 7.
52. Lebourg, M.,;, Anton, J. S.,;, Gomez Ribelles, J. L., Eur. Polym. J. 2008, 44, 2207.
53. Lam, C. X.,;, Hutmacher, D. W.,;, Schantz, J. T.,;, Woodruff, M. A.,;, Teoh, S. H., J. Biomed. Mater. Res. A 2009, 90 (3), 906.
54. Middleton, J. C.,;, Tipton, A., J. Biomaterials 2000, 21, 2335.
55. Brown, M.,;, Farrar, D., Plast. Rubber Compos. 2008, 37 (2-4), 46.