Effect of porosity on electrochemical and mechanical properties of composite Li-ion anodes

Journal of Composite Materials

Volumn 49, Issue 15, 2015, Pages 1849-1862

  Antartis, Dimitrios ^a   Dillon, Shen ^b   Chasiotis, Ioannis ^a  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^b University of Illinois at Urbana Champaign   (United States)

Author keywords

electrochemical cycling; Graphite; lithiation; PVDF; tin

Indexed keywords

FLUORINE COMPOUNDS; GRAPHITE; LITHIUM-ION BATTERIES; MECHANICAL PROPERTIES; POROSITY; TIN;

ELECTROCHEMICAL CAPACITIES; ELECTROCHEMICAL CYCLING; ELECTROCHEMICAL STUDIES; INITIAL ELASTIC MODULUS; LITHIATION; POLYVINYLIDENE FLUORIDES; PROPERTIES OF COMPOSITES; PVDF;

ANODES;

EID: 84930744891     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998314568653     Document Type: Conference Paper

References (59)

1. Agubra V, Fergus J. Lithium ion battery anode aging mechanisms. Materials. 2013 ; 6: 1310-1325
2. Chang ST, Leu IC, Liao CL, et al. Electrochemical behavior of nanocrystalline tin oxide electrodeposited on a Cu substrate for Li-ion batteries. J Mater Chem. 2004 ; 14: 1821-1826
3. Cheng YT, Verbrugge MW. Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation. J Power Source. 2009 ; 190: 453-460
4. Sethuraman VA, Chon MJ, Shimshak M, et al. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation. J Power Source. 2010 ; 195: 5062-5066
5. Christensen J, Newman J. Stress generation and fracture in lithium insertion materials. J Solid Stat Electroch. 2006 ; 10: 293-319
6. Jones EMC, Silberstein MN, White SR, et al. In situ measurements of strain on composite battery electrodes during electrochemical cycling. Exp Mech. 2014 ; 54: 971-985
7. Qi Y, Harris S. In situ observation of strains during lithiation of a graphite electrode. J Electroch Soc. 2010 ; 157: A741 - A747
8. Zhang X, Shyy W, Sastry AM. Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles. J Electroch Soc. 2007 ; 154: A910 - A916
9. Aricò AS, Bruce P, Scrosati B, et al. Nanostructured materials for advanced energy conversion and storage devices. Nature Mater. 2005 ; 4: 366-377
10. Cheng YT, Verbrugge MW. The influence of surface mechanics on diffusion induced stresses within spherical nanoparticles. J Appl Phys. 2008 ; 104: 083521-1-083521-6
11. García RE, Chiang YM, Carter WC, et al. Microstructural modeling and design of rechargeable lithium-ion batteries. J Electroch Soc. 2005 ; 152: A255 - A263
12. McDowell MT, Lee SW, Harris JT, et al. In situ TEM of two-phase lithiation of amorphous silicon nanospheres. Nanoletters. 2013 ; 13: 758-764
13. Yang J, Winter M, Besenhard JO. Small particle size multiphase Li-alloy anodes for lithium-ion-batteries. Solid State Ion. 1996 ; 90: 281-287
14. Welna DT, Qu L, Taylor BE, et al. Vertically aligned carbon nanotube electrodes for lithium-ion batteries. J Power Source. 2011 ; 196: 1455-1460
15. Jacob M, Haag JM, Pattanaik G, et al. Nanostructured 3D electrode architectures for high-rate Li-ion batteries. Adv Mater. 2013 ; 25: 3238-3243
16. Novák P, Scheifele W, Winter M, et al. Graphite electrodes with tailored porosity for rechargeable ion-transfer batteries. J Power Source. 1997 ; 68: 267-270
17. Patil A, Patil V, Shin DW, et al. Issue and challenges facing rechargeable thin film lithium batteries. Mater Res Bull. 2008 ; 43: 1913-1942
18. Manev V, Naidenov I, Puresheva B, et al. Effect of electrode porosity on the performance of natural Brazilian graphite electrodes. J Power Source. 1995 ; 57: 133-136
19. Park M, Zhang X, Chung M, et al. A review of conduction phenomena in Li-ion batteries. J Power Source. 2010 ; 195: 7904-7929
20. Rubino RS, Gan H, Takeuchi ES. A study of capacity fade in cylindrical and prismatic lithium-ion batteries. J Electrochem Soc. 2001 ; 148: A1029-1033
21. Shim J, Striebel KA. The dependence of natural graphite anode performance on electrode density. J Power Source. 2004 ; 130: 247-253
22. Striebel KA, Sierra A, Shim J, et al. The effect of compression on natural graphite anode performance and matrix conductivity. J Power Source. 2004 ; 134: 241-251
23. Zaghib K, Song X, Guerfi A, et al. Effect of particle morphology on lithium intercalation rates in natural graphite. J Power Source. 2003 ; 124: 505-512
24. Nam DH, Kim RH, Han DW, et al. Electrochemical performances of Sn anode electrodeposited on porous Cu foam for Li-ion batteries. Electroch Acta. 2012 ; 66: 126-132
25. Shim J, Striebel KA. Effect of electrode density on cycle performance and irreversible capacity loss for natural graphite anode in lithium-ion batteries. J Power Source. 2004 ; 119-121: 934-937
26. Beaulieu L, Beattie S, Hatchard T, et al. The electrochemical reaction of lithium with tin studied by in situ AFM. J Electroch Soc. 2003 ; 150: A419 - A424
27. Cannarella J, Arnold CB. Stress evolution and capacity fade in constraint lithium-ion pouch cells. J Power Source. 2014 ; 245: 745-751
28. Glaize C, Geniès S Lithium batteries and other electrochemical storage systems. 1 st ed. Hoboken, NJ: John Wiley & Sons Publ, 2013, pp. 123-124. Hoboken, NJ: John Wiley & Sons Publ ; 2013: 123-124.
29. Ding Y, Zhang P, Long Z, et al. The ionic conductivity and mechanical property of electrospun P(Vdf-HFP)/PMMA membranes for lithium ion batteries. J Membr Sci. 2009 ; 329: 56-59
30. Liu WR, Yang MH, Wu HC, et al. Enhanced cycle life of Si anode for Li-ion batteries by using modified elastomeric binder. Electroch Sol Stat Lett. 2005 ; 8: A100 - A103
31. Li J, Lewis R, Dahn J. Sodium carboxymethyl cellulose - a potential binder for Si negative electrodes for Li-ion batteries. Electroch Sol Stat Lett. 2007 ; 10: A17 - A20
32. Chen Z, Christensen L, Dahn JR. Comparison of PVDF and PVDF-TFE-P as binders for electrode materials showing large volume changes in lithium-ion batteries. J Electroch Soc. 2003 ; 150: A1073 - A1078
33. Pereira T, Zhanhu G, Nieh S, et al. Embedding thin-film energy cells in structural composites. Compos S Tech. 2008 ; 68: 1935-1941
34. Kim HS, Kang JS, Park JS, et al. Inkjet printed electronics for multifunctional composite structure. Compos Sci Tech. 2009 ; 69: 1256-1264
35. Thomas JP, Qidwai SM, Pogue WR, et al. Multifunctional structure-battery composites for marine systems. J Compos Mater. 2012 ; 47: 5-26
36. Mullenax J, Browning P, Huebsch W, et al. Composite multifunctional lithium ion batteries. ECS Trans. 2012 ; 41: 175-185
37. Ping L, Sherman E, Jacobsen A. Design and fabrication of multifunctional structural batteries. J Power Source. 2009 ; 189: 646-650
38. Ekstedt S, Wysocki M, Asp LE. Structural batteries made from fibre reinforced composites. Plast Rubb Compos. 2010 ; 39: 148-150
39. Ferg EE, Loyson P, Rust N. Porosity measurements of electrodes used in lead-acid batteries. J Power Source. 2005 ; 141: 316-325
40. Pinson MB, Bazant MZ. Theory of SEI formation in rechargeable batteries: capacity fade, accelerated aging and lifetime prediction. J Electroch Soc. 2012 ; 160: A243 - A250
41. Wu M, Xiao X, Vukmirovic N, et al. Towards an ideal binder design for high-capacity battery anodes. J Am Chem Soc. 2013 ; 135: 12048-12056
42. Jonnagadda K, Chasiotis I, Yagnamurthy S, et al. Experimental investigation of strain rate dependence in nanocrystalline Pt films. Exp Mech. 2010 ; 50: 25-35
43. Cho S, Chasiotis I. Elastic properties and representative volume element of polycrystalline silicon for MEMS. Exp Mech. 2007 ; 47: 37-49
44. Wang C, Appleby AJ, Little FE. Irreversible capacities of graphite anode for lithium-ion batteries. J Electroanalyt Chem. 2002 ; 519: 9-17
45. Noh KW, Dillon SJ. Morphological changes in and around Sn electrodes during Li ion cycling characterized by in-situ environmental transmission electron microscopy. Spripta Mater. 2013 ; 69: 658-661
46. Chen Q, Sieradski K. Spontaneous evolution of bicontinuous nanostructures in dealloyed Li-based systems. Nature Mat. 2013 ; 12: 1102-1106
47. Winter M, Besenhard JO. Electrochemical lithiation of tin and tin-based intermetallics and composites. Electrochimica Acta. 1999 ; 45: 31-50
48. Limthongkul P, Jang Y, Dudney NJ, et al. Electrochemically-driven solid-state amorphization in lithium-silicon alloys and implications for lithium storage. Acta Mater. 2003 ; 51: 1103-1113
49. Limthongkul P, Jang Y, Dudney NJ, et al. Electrochemically-driven solid-state amorphization in lithium-metal anodes. J Power Source. 2003 ; 119-121: 604-609
50. Vetter J, Novák P, Wagner MR, et al. Ageing mechanisms in lithium-ion batteries. J Power Source. 2005 ; 147: 269-281
51. Kováik J. Correlation between Young's modulus and porosity in porous materials. J Mat Sci Lett. 1999 ; 18: 1007-1010
52. Yoshimura HN, Molisani AL, Narita NE, et al. Porosity dependence of elastic constants in aluminum nitride ceramics. Mat Res. 2007 ; 10: 127-133
53. El Mohajir BE, Heymans N. Changes in structural and mechanical behavior of PVDF with processing and thermomechanical treatments. 1. Change in structure. Polymer. 2001 ; 42: 5661-5667
54. Hattory T, Ohigashi H. Improved piezoelectricity on thick lamellar β-form crystals of poly(vinylidene fluoride) crystallized under high pressure. J Appl Phys. 1996 ; 79: 2016-2022
55. Matsushige K, Takemura T. Melting and crystallization of poly(vinylidene fluoride) under high pressure. J Polym Sci. 1978 ; 16: 921-934
56. Saunier J, Alloin F, Sanchez JY, et al. Plasticized microporous poly(vinylidene fluoride) separators for lithium-ion batteries. III. Gel properties and irreversible modifications of poly(vinylidene fluoride) membranes under swelling in liquid electrolytes. J Polym Sci. 2004 ; 42: 2308-2317
57. Chen Z, Christensen L, Dahn JR. Study of the mechanical and electrical properties of carbon/poly(vinylidene fluoride-tetrafluoroethylene-propylene) films crosslinked with triethylenetetramine: possible application as binder for lithium-ion battery electrodes. J Appl Polym Sci. 2004 ; 91: 2949-2957
58. Renganathan S, Sikha G, Santhanagopalan S, et al. Theoretical analysis of stresses in a lithium ion cell. J Electroch Soc. 2010 ; 157: A155-163
59. Younezi R, Hahiln M, Edström K. Surface characterization of the carbon cathode and the lithium anode of Li-O2 batteries using LiClO4 or LiBOB salts. ACS Appl Mater Inter. 2013 ; 5: 133-1341