The effect of nanoparticle additives on lubrication performance in deep drawing process: Evaluation of forming load, friction coefficient and surface quality

International Journal of Precision Engineering and Manufacturing

Volumn 16, Issue 5, 2015, Pages 929-936

  Zareh Desari, Behrooz ^a   Abaszadeh Yakhforvazani, Mohammad ^b   Khalilpourazary, Saman ^b  

^a UNIVERSITY OF TABRIZ   (Iran)

^b URMIA UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Additives; Deep drawing; Friction coefficient; Nano lubricant; Surface roughness

Indexed keywords

ADDITIVES; ALUMINA; ALUMINUM OXIDE; DEEP DRAWING; FRICTION; LUBRICATING OILS; NANOPARTICLES; QUALITY CONTROL; SHEET METAL; SURFACE PROPERTIES; SURFACE ROUGHNESS; TRIBOLOGY;

DEEP-DRAWING PROCESS; FRICTION COEFFICIENTS; FRICTION REDUCTION; LUBRICATION PERFORMANCE; LUBRICATION REGIMES; NANO-LUBRICANTS; TRIBOLOGICAL BEHAVIORS; TRIBOLOGICAL PROPERTIES;

DRAWING (FORMING);

EID: 84929178481     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-015-0121-2     Document Type: Article

References (21)

1. Vafaeesefat, A. and Khanahmadlu, M., “Comparison of the Numerical and Experimental Results of the Sheet Metal Flange Forming based on Shell-Elements Types,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 5, pp. 857–863, 2011.
2. Yang, T., “Investigation of the Strain Distribution with Lubrication during the Deep Drawing Process,” Tribology International, Vol. 43, No. 5, pp. 1104–1112, 2010.
3. Yoshimura, H., Torikai, S., Nishihara, T., Nonishi, T., and Inouchi, N., “Application of Wheat Flour Lubricants to the Press-Forming Process,” Journal of Materials Processing Technology, Vols. 125–126, pp. 375–378, 2002.
4. Carcel, A., Palomares, D., Rodilla, E., and Puig, M. P., “Evaluation of Vegetable Oils as Pre-Lube Oils for Stamping,” Materials & Design, Vol. 26, No. 7, pp. 587–593, 2005.
5. Kosanov, J., Lenard, J. G., Uhrig, J., and Wallfarth, B., “The Effect of Lubricant Additives on the Coefficient of Friction in the Flat-Die Test,” Materials Science and Engineering: A, Vol. 427, No. 1, pp. 274–281, 2006.
6. Rao, K. and Xie, C., “A Comparative Study on the Performance of Boric Acid with Several Conventional Lubricants in Metal Forming Processes,” Tribology International, Vol. 39, No. 7, pp. 663–668, 2006.
7. Lovell, M., Higgs, C. F., Deshmukh, P., and Mobley, A., “Increasing Formability in Sheet Metal Stamping Operations using Environmentally Friendly Lubricants,” Journal of Materials Processing Technology, Vol. 177, No. 1–3, pp. 89–90, 2006.
8. Lee, C. G., Hwang, Y. J., Choi, Y. M., Lee, J. K., Choi, C., and Oh, J. M., “A Study on the Tribological Characteristics of Graphite Nano Lubricants,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 85–90, 2009.
9. Khalilpourazary, S. and Meshkat, S., “Investigation of the Effects of Alumina Nanoparticles on Spur Gear Surface Roughness and Hob Tool Wear in Hobbing Process,” The International Journal of Advanced Manufacturing Technology, Vol. 71, No. 9–12, pp. 1599–1610, 2014.
10. Battez, A. H., González, R., Viesca, J., Fernández, J., Fernández, J. D., et al., “CuO, ZrO2 and ZnO Nanoparticles as Antiwear Additive in Oil Lubricants,” Wear, Vol. 265, No. 3, pp. 422–428, 2008.
11. Mosleh, M., Atnafu, N. D., Belk, J. H., and Nobles, O. M., “Modification of Sheet Metal Forming Fluids with Dispersed Nanoparticles for Improved Lubrication,” Wear, Vol. 267, No. 5, pp. 1220–1225, 2009.
12. Thottackkad, M. V., Perikinalil, R. K., and Kumarapillai, P. N., “Experimental Evaluation on the Tribological Properties of Coconut Oil by the Addition of CuO Nanoparticles,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 1, pp. 111–116, 2012.
13. Kalakada, S. B., Kumarapillai, P. N., and Perikinalil, R. K., “Analysis of Static and Dynamic Performance Characteristics of THD Journal Bearing Operating under Lubricants Containing Nanoparticles,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 10, pp. 1869–1876, 2012.
14. Saravanakumar, N., Prabu, L., Karthik, M., and Rajamanickam, A., “Experimental Analysis on Cutting Fluid Dispersed with Silver Nano Particles,” Journal of Mechanical Science and Technology, Vol. 28, No. 2, pp. 645–651, 2014.
15. Lee, P. H., Nam, J. S., Li, C., and Lee, S. W., “An Experimental Study on Micro-Grinding Process with Nanofluid Minimum Quantity Lubrication (MQL),” Int. J. Precis. Eng. Manuf., Vol. 13, No. 3, pp. 331–338, 2012.
16. Mao, C., Tang, X., Zou, H., Huang, X., and Zhou, Z., “Investigation of Grinding Characteristic using Nanofluid Minimum Quantity Lubrication,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 10, pp. 1745–1752, 2012.
17. Davoodi, B. and Zareh-Desari, B., “Assessment of Forming Parameters Influencing Spring-Back in Multi-Point Forming Process: A Comprehensive Experimental and Numerical Study,” Materials & Design, Vol. 59, No. pp. 103–114, 2014.
18. Ahmadi, S., Eivani, A., and Akbarzadeh, A., “Experimental and Analytical Studies on the Prediction of Forming Limit Diagrams,” Computational Materials Science, Vol. 44, No. 4, pp. 1252–1257, 2009.
19. Zhang, W., Demydov, D., Jahan, M. P., Mistry, K., Erdemir, A., and Malshe, A. P., “Fundamental Understanding of the Tribological and Thermal Behavior of Ag-MoS2 Nanoparticle-based Multi-Component Lubricating System,” Wear, Vol. 288, pp. 9–16, 2012.
20. Sayuti, M., Sarhan, A. A., and Salem, F., “Novel Uses of SiO2 Nano-Lubrication System in Hard Turning Process of Hardened Steel AISI 4140 for less Tool Wear, Surface Roughness and Oil Consumption,” Journal of Cleaner Production, Vol. 67, pp. 265–276, 2014.
21. Rahmati, B., Sarhan, A. A., and Sayuti, M., “Investigating the Optimum Molybdenum Disulfide (MoS2) Nanolubrication Parameters in CNC Milling of AL6061-T6 Alloy,” The International Journal of Advanced Manufacturing Technology, Vol. 70, No. 5–8, pp. 1143–1155, 2014.