Tough alumina/polymer layered composites with high ceramic content

Journal of the American Ceramic Society

Volumn 98, Issue 4, 2015, Pages 1285-1291

  Livanov, Konstantin ^a   Jelitto, Hans ^b   Bar On, Benny ^c   Schulte, Karl ^b   Schneider, Gerold A ^b   Wagner, Daniel H ^a  

^a WEIZMANN INSTITUTE OF SCIENCE   (Israel)

^b HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

^c BEN GURION UNIVERSITY OF THE NEGEV   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; CERAMIC MATERIALS; COMPOSITE FILMS; CRACKS; FAILURE (MECHANICAL); FRACTURE; LAMINATED COMPOSITES; STRENGTH OF MATERIALS;

BIOLOGICAL COMPOSITES; EFFECTIVE RESOLUTIONS; FOUR-POINT BENDING METHOD; HIERARCHICAL ARCHITECTURES; INTERLAYER MATERIALS; INTERLOCKING MECHANISMS; STRENGTH AND TOUGHNESS; ULTIMATE PROPERTIES;

FRACTURE TOUGHNESS;

EID: 84926391621     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/jace.13413     Document Type: Article

References (55)

1. W. J. Clegg, K. Kendall, N. Mc. N. Alford, T. W. Button, and J. D. Birchall, "A Simple Way to Make Tough Ceramics," Nature, 347, 455-7 (1990).
2. R. O. Ritchie, "The Conflicts Between Strength and Toughness," Nature Mater, 10, 817-22 (2011).
3. M. E. Launey and R. O. Ritchie, "On the Fracture Toughness of Advanced Materials," Adv. Mater., 21, 2103-10 (2009).
4. G. Mayer, "Rigid Biological Systems as Models for Synthetic Composites,"Science, 310, 1144-7 (2005).
5. A. G. Evans, "Perspective on the Development of High-Toughness Ceramics,"J. Am. Ceram. Soc., 73, 187-206 (1990).
6. R. O. Ritchie, "Mechanisms of Fatigue-Crack Propagation in Ductile and Brittle Solids," Inter. J. Fract., 100, 55-83 (1999).
7. J. Kuebler, G. Blugan, H. Jelitto, G. A. Schneider, and R. Dobedoe, "Structural Micro-Layered Ceramics with Surfaces Under Tension and Compression with Increasing Apparent Fracture Toughness," Key Engin. Mater., 336-338, 2564-8 (2007).
8. R. Bermejo and R. Danzer, "High Failure Resistance Layered Ceramics Using Crack Bifurcation and Interface Delamination as Reinforcement Mechanisms,"Engin. Fract. Mech., 77, 2126-35 (2010).
9. A. Tasdemirci, G. Tunusoglu, and M. Güden, "The Effect of the Interlayer on the Ballistic Performance of Ceramic/Composite Armors: Experimental and Numerical Study," Inter. J. Impact. Engin., 44, 1-9 (2012).
10. V. M. Sglavo, F. De Genua, A. Molinari, and F. Casari, "Alumina/Silicon Carbide Laminated Composites by Spark Plasma Sintering," J. Am. Ceram. Soc., 92, 2693-7 (2009).
11. R. Bermejo, L. Ceseracciu, L. Llanes, and M. Anglada, "Fracture of Layered Ceramics," Key Engin. Mater., 409, 94-106 (2009).
12. R. Pavlacka, R. Bermejo, Y. Chang, D. J. Green, and G. L. Messing, "Fracture Behavior of Layered Alumina Microstructural Composites with Highly Textured Layers," J. Am. Ceram. Soc., 96, 1577-85 (2013).
13. Y. Chang, R. Bermejo, and G. L. Messing, "Improved Fracture Behavior of Alumina Microstructural Composites with Highly Textured Compressive Layers," J. Am. Ceram. Soc., 97, 3643-51 (2014).
14. G. Mayer, "New Classes of Tough Composite Materials - Lessons from Natural Rigid Biological Systems," Mater. Sci. Eng., C, 26, 1261-8 (2006).
15. S. Weiner and H. D. Wagner, "The Material Bone: Structure-Mechanical Function Relations," Annu. Rev. Mater. Sci., 28, 271-98 (1998).
16. A. Studart, "Towards High-Performance Bioinspired Composites," Adv. Mater., 24, 5024-44 (2012).
17. B. Achrai and H. D. Wagner, "Micro-Structure and Mechanical Properties of the Turtle Carapace as a Biological Composite Shield," Acta Biomater., 9, 5890-902 (2013).
18. G. Mayer, "New Toughening Concepts for Ceramic Composites from Rigid Natural Materials," J. Mech. Behavior Biomed. Mater., 04 [5] 670-81 (2011).
19. M. A. Meyers, P.-Y. Chen, A. Y.-M. Lin, and Y. Seki, "Biological Materials: Structure and Mechanical Properties," Prog. Mater Sci., 53, 1-206 (2008).
20. C. Levi, J. L. Barton, C. Guillmet, E. Le Bras, and P. Lehuede, "A Remarkably Strong Natural Glassy Rod: The Anchoring Spicule of the Monorhaphis Sponge," J. Mater. Sci. Lett., 8, 337-9 (1989).
21. J. Aizenberg, J. C. Weaver, M. C. Thanawala, V. C. Sundar, D. E. Morse, and P. Fratzl, Science, 308, 275-8 (2005).
22. J. N. Cha, K. Shimizu, Y. Zhou, S. C. Christiansen, B. F. Chmelka, G. D. Stucky, and D. E. Morse, "Silicatein Filaments and Subunits from a Marine Sponge Direct the Polymerization of Silica and Silicones in Vitro," Proc. Natl Acad. Sci. USA, 96, 361-5 (1999).
23. M. Sarikaya, H. Fong, N. Sunderland, B. D. Flinn, G. Mayer, A. Mescher, and E. Gaino, "Biomimetic Model of a Sponge-Spicular Optical Fiber - Mechanical Properties and Structure," J. Mater. Res., 16, 1421-8 (2001).
24. H. Özcoban, T. Fett, and G. A. Schneider, "Computer-Controlled Stable Crack Growth as a Reliable and Fast Method to Determine Subcritical Crack Growth," J. Test. Eval., 40, 238-42 (2012).
25. H. Jelitto, F. Felten, C. Hausler, H. Kessler, H. Balke, and G. A. Schneider, "Measurements of Energy Release Rates for Cracks in PZT Under Electromechanical Loads.," J. Eur. Ceram. Soc., 25, 2817-20 (2005).
26. H. Jelitto, F. Hackbarth, H. Özcoban, and G. A. Schneider, "Automated Control of Stable Crack Growth for R-Curve Measurements in Brittle Materials,"Exp. Mech., 53, 163-70 (2013).
27. H. Jelitto, F. Felten, M. V. Swain, H. Balke, and G. A. Schneider, "Measurement of the Total Energy Release Rate for Cracks in PZT Under Combined Mechanical and Electrical Loading," J. Appl. Mech., 74, 1197-211 (2007).
28. W. J. Clegg, "The Fabrication and Failure of Laminar Ceramic Composites,"Acta Metall. Mater., 40, 3085-93 (1992).
29. W. J. Clegg, "4.15 Layered Ceramic Structures"; Chapter 4.15 in Comprehensive Composite Materials, Vol. 4, Edited by A. Kelly and C. Zweben. Elsevier, Oxford, UK, 2000.
30. A. J. Phillipps, W. J. Clegg, and T. W. Clyne, "Fracture Behavior of Ceramic Laminates in Bending-I. Modelling of Crack Propagation," Acta Metall. Mater., 41, 805-17 (1993).
31. A. J. Phillipps, W. J. Clegg, and T. W. Clyne, "Fracture Behavior of Ceramic Laminates in Bending-II. Comparison of Model Predictions with Experimental Data," Acta Metall. Mater., 41, 819-27 (1993).
32. D. Munz and T. Fett, Ceramics - Mechanical Properties, Failure Behaviour, Materials Selection, Series in Materials Science, p. 25. Springer, Berlin, Germany, 1999.
33. H. G. Tattersall and G. Tappin, "The Work of Fracture and Its Measurement in Metals, Ceramics and Other Materials," J. Mater. Sci., 1, 296-301 (1966).
34. S. F. dos Santos and J. A. Rodrigues, "Correlation Between Fracture Toughness, Work of Fracture and Fractal Dimensions of Alumina-Mullite- Zirconia Composites," Mater. Res., 6, 219-22 (2003).
35. ASTM C1161-02a, Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature, American Society for Testing and Materials, West Conshohocken, PA 2008.
36. R. F. Krause Jr., "Rising Fracture Toughness from the Bending Strength of Indented Alumina Beams," J. Am. Ceram. Soc., 71, 338-43 (1988).
37. M. Guazzato, M. Albakry, S. P. Ringer, and M. V. Swain, "Strength, Fracture Toughness and Microstructure of a Selection of All-Ceramic Materials. Part I. Pressable and Alumina Glass-Infiltrated Ceramics," Dental Mater., 20, 441-8 (2004).
38. L. F. M. da Silva, T. N. S. S. Rodrigues, M. A. V. Figueiredo, M. F. S. F. de Moura, and J. A. G. Chousal, "Effect of Adhesive Type and Thickness on the Lap Shear Strength," J. Adhesion, 82, 1091-115 (2006).
39. H. Özcoban, H. Jelitto, and G. A. Schneider, "Influence of Finite Notch Root Radius and Optically Determined Crack Length," J. Eur. Ceram. Soc., 30, 1579-83 (2010).
40. H. Özcoban, V. Salikov, H. Jelitto, and G. A. Schneider, "Experimental Crack Front Investigation of Unpoled Soft Lead Zirconate Titanate (PZT) Using the Single Edge v-Notched Beam (SEVNB) Method," Exp. Mech., 52, 1565-8 (2012).
41. S. Fünfschilling, T. Fett, M. J. Hoffmann, R. Oberacker, H. Jelitto, and G. A. Schneider, "Determination of the Crack-Tip Toughness in Silicon Nitride Ceramics," J. Mater. Sci., 44, 335-8 (2009).
42. S. Fünfschilling, T. Fett, R. Oberacker, M. J. Hoffmann, H. Özcoban, H. Jelitto, G. A. Schneider, and J. J. Kruzic, "R-Curves from Compliance and Optical Crack-Length Measurements," J. Am. Ceram. Soc., 93, 2814-21 (2010).
43. 2Dispersed Phase," J. Am. Ceram. Soc., 59, 49-51 (1976).
44. F. Halitim, N. Ikhlef, L. Boudoukha, and G. Fantozzi, "Young's Modulus and Fracture Toughness of Alumina Implanted with Zr+, Cr+, Ti+ and Ni+. The Effect of the Residual Stresses," J. Phys. D: Appl. Phys., 30, 330-7 (1997).
45. J. Wrba, N. Lerch, and G. Muèller, "Increasing the Fracture Toughness of Alumina Based Ceramics by Oxidation-Induced Surface Stress," J. Mater. Sci. Lett., 17, 921-3 (1998).
46. D. Casellas, M. M. Nagl, L. Llanes, and M. Anglada, "Fracture Toughness of Alumina and ZTA Ceramics: Microstructural Coarsening Effects," J. Mater. Proc. Tech., 143-144, 148-52 (2003).
47. G. A. Gogotsi, "Fracture Toughness of Ceramics and Ceramic Composites,"Ceram. Inter., 29, 777-84 (2003).
48. A. J. Kinloch, "The Science of Adhesion Part 1: Surface and Interfacial Aspects," J. Mater. Sci., 15, 2141-66 (1980).
49. A. J. Kinloch, "The Science of Adhesion Part 2: Mechanics and Mechanisms of Failure," J. Mater. Sci., 17, 617-51 (1982).
50. L. P. Kollar and G. S. Springer, Mechanics of Composite Structures. Cambridge University Press, Cambridge, UK, 2003.
51. F. Bouville, E. Maire, S. Meille, B. Van de Moortèle, A. J. Stevenson, and S. Deville, "Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents,"Nature Mater., 13, 508-14 (2014).
52. M. E. Launey, E. Munch, D. H. Alsem, E. Saiz, A. P. Tomsia, and R. O. Ritchie, "A Novel Biomimetic Approach to the Design of High-Performance Ceramic-Metal Composites," J. R. Soc. Interface, 7, 741-53 (2010).
53. E. Munch, M. E. Launey, D. H Alsem, E. Saiz, A. P. Tomsia, and R. O. Ritchie, "Tough, Bio-Inspired Hybrid Materials," Science, 322, 1516-20 (2008).
54. H. Prielipp, M. Knechtel, N. Claussen, S. K. Streiffer, H. Miillejans, M. Rühle, and J. Rödel, "Strength and Fracture Toughness of Aluminum/Alumina Composites with Interpenetrating Networks," Mater. Sci. Eng., A, 197, 19-30 (1995).
55. 3/Ni Composites by a Powder Coating Technique," J. Mater. Sci., 30, 855-9 (1995).