Corrigendum: Strong, tough and stiff bioinspired ceramics from brittle constituents (Nature Materials (2014) 13 (508-514) DOI: 10.1038/nmat3915);Strong, tough and stiff bioinspired ceramics from brittle constituents

Nature Materials

Volumn 13, Issue 5, 2014, Pages 508-514

  Bouville, Florian ^a,b   Maire, Eric ^b   Meille, Sylvain ^b   Van De Moortèle, Bertrand ^c   Stevenson, Adam J ^a   Deville, Sylvain ^a  

^a SAINT GOBAIN RECHERCHE   (France)

^b UNIVERSITÉ DE LYON   (France)

^c UNIVERSITÉ DE LYON   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; MATERIALS HANDLING; STIFFNESS;

BIO-INSPIRED APPROACH; BRITTLE CONSTITUENTS; CERAMIC PROCESSING; DIFFERENT LENGTH SCALE; ENGINEERING MATERIALS; HIGH TEMPERATURE STABILITY; MECHANICAL PROPERTIES AT HIGH TEMPERATURES; STRENGTH AND STIFFNESS;

STRENGTH OF MATERIALS;

BIOMATERIAL;

ARTICLE; BIOMECHANICS; CERAMICS; CHEMISTRY; HEAT; MATERIALS TESTING; SCANNING ELECTRON MICROSCOPY;

BIOCOMPATIBLE MATERIALS; BIOMECHANICAL PHENOMENA; CERAMICS; HOT TEMPERATURE; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING;

EID: 84899062794     PISSN: 14761122     EISSN: 14764660     Source Type: Journal    
DOI: 10.1038/nmat4982     Document Type: Erratum

References (43)

1. Ashby, M. F. Materials Selection in Mechanical Design 624 (ASTM International, 2010
2. Ritchie, R. O. The conflicts between strength and toughness. Nature Mater. 10, 817-822 (2011
3. Koester, K. J., Ager, J.W. & Ritchie, R. O. The true toughness of human cortical bone measured with realistically short cracks. Nature Mater. 7, 672-677 (2008
4. Peterlik, H., Roschger, P., Klaushofer, K. & Fratzl, P. From brittle to ductile fracture of bone. Nature Mater. 5, 52-55 (2006
5. Barthelat, F. & Rabiei, R. Toughness amplification in natural composites. J. Mech. Phys. Solids 59, 829-840 (2011
6. Barthelat, F. et al. On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure. J. Mech. Phys. Solids 55, 306-337 (2007
7. Okumura, K. & De Gennes, P. G.Why is nacre strong? Elastic theory and fracture mechanics for biocomposites with stratified structures. Eur. Phys. J. E 4, 121-127 (2001
8. Song, F., Soh, A. K. & Bai, Y. L. Structural and mechanical properties of the organic matrix layers of nacre. Biomaterials 24, 3623-3631 (2003
9. Meyers, M. A., McKittrick, J. & Chen, P-Y. Structural biological materials: Critical mechanics-materials connections. Science 339, 773-779 (2013
10. Bonderer, L. J., Studart, A. R. & Gauckler, L. J. Bioinspired design and assembly of platelet reinforced polymer films. Science 319, 1069-1073 (2008
11. Clegg,W. J., Kendall, K., Alford, N. M., Button, T.W. & Birchall, J. D. A simple way to make tough ceramics. Nature 347, 455-457 (1990
12. Munch, E. et al. Tough, bio-inspired hybrid materials. Science 322, 1516-1520 (2008
13. Erb, R. M., Libanori, R., Rothfuchs, N. & Studart, A. R. Composites reinforced in three dimensions by using low magnetic fields. Science 335, 199-204 (2012
14. Deville, S. et al. Metastable and unstable cellular solidification of colloidal suspensions. Nature Mater. 8, 966-972 (2009
15. Hunger, P. M., Donius, A. E. &Wegst, U. G. K. Platelets self-Assemble into porous nacre during freeze casting. J. Mech. Behav. Biomed. Mater. 19, 87-93 (2013
16. Herring, C. Effect of change of scale on sintering phenomena. J. Appl. Phys. 21, 301-303 (1950
17. Zaitsev, A., Litvina, A. D., Mogutnov, B. M. & Tsaplin, A. A. Thermodynamic properties and phase equilibria in the system CaO-SiO2-Al2O3. High Temp. Mater. Sci. 34, 223-231 (1995
18. Faber, K. T. & Evans, A. G. Crack deflection processes-I Theory. Acta Metall. 31, 564-576 (1983
19. Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P. Bioinspired design criteria for damage-resistant materials with periodically varying microstructure. Adv. Funct. Mater. 21, 3634-3641 (2011
20. Koester, K. J., Ager, J.W. & Ritchie, R. O. The effect of aging on crack-growth resistance and toughening mechanisms in human dentin. Biomaterials 29, 1318-1328 (2008
21. Cook, J., Gordon, J. E., Evans, C. C. & Marsh, D. M. A mechanism for the control of crack propagation in all-brittle systems. Proc. R. Soc. A 282, 508-520 (1964
22. Dimas, L. S. & Buehler, M. J. Tough and sti composites with simple building blocks. J. Mater. Res. 28, 1295-1303 (2013
23. Launey, M. E. et al. A novel biomimetic approach to the design of high-performance ceramic-metal composites. J. R. Soc. Inter. 7, 741-753 (2010
24. Munro, R. G. Evaluated material properties for a sintered alpha-Alumina. J. Am. Ceram. Soc. 28, 1919-1928 (1997
25. Pavlacka, R., Bermejo, R., Chang, Y., Green, D. J. & Messing, G. L. Fracture behavior of layered alumina microstructural composites with highly textured layers. J. Am. Ceram. Soc. 9, 1577-1585 (2013
26. Zhan, G-D., Kuntz, J. D.,Wan, J. & Mukherjee, A. K. Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites. Nature Mater. 2, 38-42 (2003
27. Tuan,W. H.,Wu, H. H. & Yang, T. J. The preparation of Al2O3/Ni composites by a powder coating technique. J. Mater. Sci. 30, 855-859 (1995
28. Travitzky, N., Gutmanas, E. & Claussen, N. Mechanical properties of composites fabricated by pressureless infiltration technique. Mater. Lett. 33, 47-50 (1997
29. Prielipp, H. et al. Strength and fracture toughness of aluminum/alumina composites with interpenetrating networks. Mater. Sci. Eng. A 197, 19-30 (1995
30. Aghajanian, M. K., MacMillan, N. H., Kennedy, C. R., Luszcz, S. J. & Roy, R. Properties and microstructures of Lanxide Al2O3-Al ceramic composite materials. J. Mater. Sci. 24, 658-670 (1989
31. Chen, R., Chiu, Y. & Tuan,W. Toughening alumina with both nickel and zirconia inclusions. J. Eur. Ceram. Soc. 20, 1901-1906 (2000
32. Wei, T. et al. The effect of carbon nanotubes microstructures on reinforcing properties of SWNTs/alumina composite. Mater. Res. Bull. 43, 2806-2809 (2008
33. Peigney, A., Laurent, C., Flahaut, E. & Rousset, a. Carbon nanotubes in novel ceramic matrix nanocomposites. Ceram. Int. 26, 677-683 (2000
34. Yamamoto, G., Omori, M., Hashida, T. & Kimura, H. A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties. Nanotechnology 19, 315708 (2008
35. Liu, J., Yan, H. & Jiang, K. Mechanical properties of graphene plateletreinforced alumina ceramic composites. Ceram. Int. 39, 6215-6221 (2013
36. ASTM E1820-06, Annual Book of ASTM Standards, Vol 0301: Metals-Mechanical Testing; Elevated and Low-Temperature Tests; Metallography (ASTM International, 2006
37. Launey, M. E. et al. Designing highly toughened hybrid composites through nature-inspired hierarchical complexity. Acta Mater. 57, 2919-2932 (2009
38. Nalla, R. K., Stölken, J. S., Kinney, J. H. & Ritchie, R. O. Fracture in human cortical bone: Local fracture criteria and toughening mechanisms. J. Biomech. 38, 1517-1525 (2005
39. National Institute of Standards and Technology. NIST Structural Ceramics Database (SCD) (2002); www.ceramics.nist.gov/srd/scd
40. Libanori, R., Erb, R. M. & Studart, A. R. Mechanics of platelet-reinforced composites assembled using mechanical and magnetic stimuli. ACS Appl. Mater. Interf. 5, 10794-10805 (2013
41. Becher, P. F. Microstructural design of toughened ceramics. J. Am. Ceram. Soc. 74, 255-269 (1991
42. Rahaman, M. N., Yao, A., Bal, B. S., Garino, J. P. & Ries, M. D. Ceramics for prosthetic hip and knee joint replacement. J. Am. Ceram. Soc. 90, 1965-1988 (2007
43. Wegst, U. G. K. & Ashby, M. F. The mechanical Efficiency of natural materials. Phil. Mag. 84, 2167-2186 (2004