Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal substrates with different surface morphology

Composites Part B: Engineering

Volumn 77, Issue , 2015, Pages 38-45

  Sun, Zhi ^a,b   Shi, Shanshan ^a,b   Hu, Xiaozhi ^b   Guo, Xu ^a   Chen, Jianyun ^a   Chen, Haoran ^a  

^a DALIAN UNIVERSITY OF TECHNOLOGY   (China)

^b UNIVERSITY OF WESTERN AUSTRALIA   (Australia)

Author keywords

A. Aramid fiber; A. Hybrid; B. Adhesion; B. Fracture toughness; Composite adhesive joint

Indexed keywords

ADHESIVE JOINTS; ALUMINUM; CARBON; CARBON FIBERS; FIBER BONDING; FIBERS; FRACTURE; FRACTURE TOUGHNESS; METALS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; SUBSTRATES; SURFACE ROUGHNESS; TEXTILE FIBERS;

A. HYBRID; CARBON FIBER COMPOSITE; CARBON FIBER EPOXY COMPOSITES; COMPOSITE ADHESIVE JOINTS; CRITICAL ENERGY RELEASE RATE; FIBER-METAL INTERFACES; INTERFACIAL FRACTURE TOUGHNESS; SURFACE ROUGHNESS EFFECTS;

ARAMID FIBERS;

EID: 84925384389     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2015.03.010     Document Type: Article

References (41)

1. T. Sinmazcelik, E. Avcu, M.O. Bora, and O. Coban A review: fiber metal laminates, background, bonding types and applied test methods Mater Des 32 2011 3671 3685
2. K.T. Lau, P.K. Dutta, L.M. Zhou, and D. Hui Mechanics of bonds in an FRP bonded concrete beam Compos Part B 32 2001 491 502
3. S.N. Nwosu, D. Hui, and P.K. Dutta Dynamic mode II delamination fracture of unidirectional graphite-epoxy composites Compos Part B 34 2003 303 316
4. E.C. Botelho, A.N. Campos, E.D. Barros, L.C. Pardini, and M.C. Rezende Damping behavior of continuous fiber/metal composite materials by the free vibration method Compos Part B 37 2006 255 263
5. Z. Sun, J. Jeyaraman, S. Sun, X. Hu, and H. Chen Carbon-fiber aluminum-foam sandwich with short aramid-fiber interfacial toughening Compos Part A 43 2012 2059 2064
6. Z. Sun, X. Hu, S. Sun, and H. Chen Energy-absorption enhancement in carbon-fiber aluminum-foam sandwich structures from short aramid-fiber interfacial reinforcement Compos Sci Technol 77 2013 14 21
7. L. Wang, W.-Q. Liu, L. Wan, H. Fang, and D. Hui Mechanical performance of foam-filled lattice composite panels in four-point bending: experimental investigation and analytical modeling Compos Part B 67 2014 270 279
8. A.H. Al-Saidy, F.W. Klaiber, and T.J. Wipf Strengthening of steel-concrete composite girders using carbon fiber reinforced polymer plates Constr Build Mater 21 2007 295 302
9. S. Nemat-Nasser, W.-J. Kang, J.D. McGee, W.-G. Guo, and J.B. Isaacs Experimental investigation of energy-absorption characteristics of components of sandwich structures Int J Impact Eng 34 2007 1119 1146
10. S. Shi, Z. Sun, M. Ren, H. Chen, and X. Hu Buckling response of advanced grid stiffened carbon-fiber composite cylindrical shells with reinforced cutouts Compos Part B 44 2013 26 33
11. S. Rizkalla, M. Dawood, and D. Schnerch Development of a carbon fiber reinforced polymer system for strengthening steel structures Compos Part A 39 2008 388 397
12. B.-E. Lee, E.-T. Park, J. Kim, B.-S. Kang, and W.-J. Song Analytical evaluation on uniaxial tensile deformation behavior of fiber metal laminate based on SRPP and its experimental confirmation Compos Part B 67 2014 154 159
13. S.-J. Guo, Q.-S. Yang, X.Q. He, and K.M. Liew Modeling of interface cracking in copper-graphite composites by MD and CFE method Compos Part B 58 2014 586 592
14. V. Fiore, F. Alagna, G.D. Bella, and A. Valenza On the mechanical behavior of BFRP to aluminum AA6086 mixed joints Compos Part B 48 2013 79 87
15. S. Shi, Z. Sun, M. Ren, H. Chen, and X. Hu Buckling resistance of grid-stiffened carbon-fiber thin-shell structures Compos Part B 45 2013 888 896
16. L. Wang, W.-Q. Liw, and D. Hui Compression strength of hollow sandwich columns with GFRP skins and a paulownia wood core Compos Part B 60 2014 495 506
17. A. Benachour, S. Benyoucef, A. Tounsi, and E.A. Adda Bedia Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate Eng Struct 30 2008 3305 3315
18. G.V. Marannano, and A. Pasta An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates Eng Fract Mech 74 2007 612 626
19. K.H. Lee, B.J. Kim, S.H. Yoon, and D.G. Lee Durability improvement of co-cured carbon/epoxy composite-aluminum laminate with nano-size carbon black at cryogenic temperature J Adhes Sci Technol 23 2009 639 649
20. P.R. Thakre, D.C. Lagoudas, J.C. Riddick, T.S. Gates, S.J.V. Frankland, and J.G. Ratcliffe et al. Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber-epoxy composites J Compos Mater 45 2011 1091 1107
21. N.-M. Hsiao Compression-after-impact strength and surface morphology in toughened composite materials Int J Fract 176 2012 229 236
22. I. Choi, and D.G. Lee Surface modification of carbon fiber/epoxy composites with randomly oriented aramid fiber felt for adhesion strength enhancement Compos Part A 48 2013 1 8
23. X.-Z. Hu, and Y.-W. Mai Mode I delamination and fiber bridging in carbon-fiber-epoxy composites with and without PVAL coating Compos Sci Technol 46 1993 147 156
24. M. Yasaee, I.P. Bond, R.S. Trask, and E.S. Greenhalgh Mode I interfacial toughening through discontinuous interleaves for damage suppression and control Compos Part A 43 2012 198 207
25. M. Yasaee, I.P. Bond, R.S. Trask, and E.S. Greenhalgh Mode II interfacial toughening through discontinuous interleaves for damage suppression and control Compos Part A 43 2012 121 128
26. M.-S. Sohn, and X.-Z. Hu Mode II delamination toughness of carbon-fiber epoxy composites with chopped Kevlar fiber reinforcement Compos Sci Technol 52 1994 439 448
27. M.-S. Sohn, X.-Z. Hu, J.-K. Kim, and L. Walker Impact damage characterisation of carbon fiber/epoxy composites with multi-layer reinforcement Compos Part B 31 2000 681 691
28. B.-Z. Huang, X.-Z. Hu, and J. Liu Modelling of inter-laminar toughening from chopped Kevlar fibers Compos Sci Technol 64 2004 2165 2175
29. Z. Sun, X. Hu, and H. Chen Effects of aramid-fibre toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fibre face sheet and aluminium substrate Int J Adhes Adjesives 48 2014 288 294
30. S. Shi, Z. Sun, X. Hu, and H. Chen Carbon-fiber and aluminum-honeycomb sandwich composites with and without Kevlar-fiber interfacial toughening Compos Part A 67 2014 102 110
31. R. Rattan, J. Bijwe, and M. Fahim Influence of weave of carbon fabric on low amplitude oscillating wear performance of polyetherimide composites Wear 262 2007 727 735
32. M.I. Idris Structural integrity of carbon fiber/aluminium foam sandwich composites Degree of Doctor of Philosophy in Materials Science and Engineering 2010 The University of New South Wales
33. C.-T. Lin, and P.-W. Kao Delamination growth and its effect on crack propagation in carbon fiber reinforced aluminum laminates under fatigue loading Acta Mater 44 1996 1181 1188
34. T. Sinmazçelik, E. Avcu, M.Ö. Bora, and O. Çoban A review: fibre metal laminates, background, bonding types and applied test methods Mater Des 32 2011 3671 3685
35. N.V. Datla, M. Papini, J. Ulicny, B. Carlson, and J.K. Spelt The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint Eng Fract Mech 78 2011 1125 1139
36. F. Ducept, D. Gamby, and P. Davies A mixed-mode failure criterion derived from tests on symmetric and asymmetric specimens Compos Sci Technol 59 1999 609 619
37. G.-Z. Zhu, C.-L. Zheng, and X.-F. Lu The influence of loading rate on the interfacial fracture toughness of carbon fiber-metal laminates based on magnesium alloy Adv Mater Res 328-330 2011 1373 1376
38. H.C. Cao, and A.G. Evans An experimental study of the fracture resistance of bimaterial interfaces Mech Mater 7 1989 295 304
39. C) determined using a three-point flexure test J Adhes Sci Technol 15 2001 345 369
40. E.H. Andrews, and A. Stevenson Fracture energy of epoxy resin under plane strain conditions J Mater Sci 13 1978 1680 1688
41. N. Saleema, D.K. Sarkar, R.W. Paynter, D. Gallant, and M. Eskandarian A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications Appl Surf Sci 261 2012 742 748