메뉴 건너뛰기




Volumn 48, Issue 1, 2013, Pages 1-8

Surface modification of carbon fiber/epoxy composites with randomly oriented aramid fiber felt for adhesion strength enhancement

Author keywords

A. Aramid fiber; A. Carbon fiber; B. Adhesion; E. Autoclave

Indexed keywords

A-CARBON; ADHESIVE BONDING; ADHESIVELY BONDED JOINTS; BRIDGING EFFECTS; CARBON FIBER/EPOXY COMPOSITES; CURE CYCLE; E. AUTOCLAVES; MODIFICATION OF CARBON FIBERS; SINGLE-LAP SHEAR TESTS; STRENGTH ENHANCEMENT;

EID: 84873646635     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2013.01.003     Document Type: Article
Times cited : (42)

References (27)
  • 3
    • 84864713155 scopus 로고    scopus 로고
    • Surface treatments and adhesives for bonded repairs to high temperature carbon-bismaleimide composite structure
    • A.N. Rider, N. Brack, and J. Gopalakrishna Surface treatments and adhesives for bonded repairs to high temperature carbon-bismaleimide composite structure J Adhes Sci Technol 26 7 2012 911 937
    • (2012) J Adhes Sci Technol , vol.26 , Issue.7 , pp. 911-937
    • Rider, A.N.1    Brack, N.2    Gopalakrishna, J.3
  • 4
    • 84864676911 scopus 로고    scopus 로고
    • Thermal characterization and flammability of structural epoxy adhesive and carbon/epoxy composite with environmental and chemical degradation
    • R.A. Campbell, B.M. Pickett, V.L. Saponara, and D. Dierdorf Thermal characterization and flammability of structural epoxy adhesive and carbon/epoxy composite with environmental and chemical degradation J Adhes Sci Technol 26 7 2012 889 910
    • (2012) J Adhes Sci Technol , vol.26 , Issue.7 , pp. 889-910
    • Campbell, R.A.1    Pickett, B.M.2    Saponara, V.L.3    Dierdorf, D.4
  • 6
    • 49049147521 scopus 로고
    • Effect of degree of abrasion of composite surfaces on strengths of adhesively bonded joints
    • M.H. Stone Effect of degree of abrasion of composite surfaces on strengths of adhesively bonded joints Int J Adhes Adhes 1 5 1981 271 272
    • (1981) Int J Adhes Adhes , vol.1 , Issue.5 , pp. 271-272
    • Stone, M.H.1
  • 7
    • 33745520160 scopus 로고
    • The plasma treatment of thermoplastic fibre composites for adhesive bonding
    • B.R.K. Blackman, and A.J. Kinloch The plasma treatment of thermoplastic fibre composites for adhesive bonding Composites 25 5 1994 332 341
    • (1994) Composites , vol.25 , Issue.5 , pp. 332-341
    • Blackman, B.R.K.1    Kinloch, A.J.2
  • 8
    • 0345170812 scopus 로고    scopus 로고
    • Adhesion characteristics of carbon/epoxy composite with low and atmospheric pressure plasma treatments
    • J.K. Kim, H.S. Kim, and D.G. Lee Adhesion characteristics of carbon/epoxy composite with low and atmospheric pressure plasma treatments J Adhes Sci Technol 17 13 2003 1751 1771
    • (2003) J Adhes Sci Technol , vol.17 , Issue.13 , pp. 1751-1771
    • Kim, J.K.1    Kim, H.S.2    Lee, D.G.3
  • 9
    • 80052388497 scopus 로고    scopus 로고
    • Flame and silane treatments for improving the adhesive bonding characteristics of aramid/epoxy composites
    • J.G. Kim, I. Choi, D.G. Lee, and I.S. Seo Flame and silane treatments for improving the adhesive bonding characteristics of aramid/epoxy composites Compos Struct 93 11 2011 2696 2705
    • (2011) Compos Struct , vol.93 , Issue.11 , pp. 2696-2705
    • Kim, J.G.1    Choi, I.2    Lee, D.G.3    Seo, I.S.4
  • 10
    • 84865515968 scopus 로고    scopus 로고
    • Carbon-fiber aluminum-foam sandwich with short aramid-fiber interfacial toughening
    • Z. Sun, J. Jeyaraman, S. Sun, X. Hu, and H. Chen Carbon-fiber aluminum-foam sandwich with short aramid-fiber interfacial toughening Composites: Part A 43 2012 2059 2064
    • (2012) Composites: Part A , vol.43 , pp. 2059-2064
    • Sun, Z.1    Jeyaraman, J.2    Sun, S.3    Hu, X.4    Chen, H.5
  • 11
    • 77949679428 scopus 로고    scopus 로고
    • Strength of the double lap joints bonded with the carbon black reinforced adhesive under the cryogenic environment
    • S.W. Park, and D.G. Lee Strength of the double lap joints bonded with the carbon black reinforced adhesive under the cryogenic environment J Adhes Sci Technol 23 4 2009 619 638
    • (2009) J Adhes Sci Technol , vol.23 , Issue.4 , pp. 619-638
    • Park, S.W.1    Lee, D.G.2
  • 12
    • 0020156747 scopus 로고
    • Surface pretreatment of carbon fibre-reinforced composites for adhesive bonding
    • B.M. Parker, and R.M. Waghorne Surface pretreatment of carbon fibre-reinforced composites for adhesive bonding Composites 13 3 1982 280 288
    • (1982) Composites , vol.13 , Issue.3 , pp. 280-288
    • Parker, B.M.1    Waghorne, R.M.2
  • 13
    • 0033712518 scopus 로고    scopus 로고
    • Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part II: Comparison with prediction
    • F.M. Zhao, and N. Takeda Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part II: comparison with prediction Composites: Part A 30 2000 1215 1224
    • (2000) Composites: Part A , vol.30 , pp. 1215-1224
    • Zhao, F.M.1    Takeda, N.2
  • 14
    • 0040375447 scopus 로고
    • Effect of carbon fibre surface on interfacial adhesive strengths in CFRP
    • Y. Sawada, Y. Nakanishi, and T. Fukuda Effect of carbon fibre surface on interfacial adhesive strengths in CFRP Composites 24 7 1993 573 579
    • (1993) Composites , vol.24 , Issue.7 , pp. 573-579
    • Sawada, Y.1    Nakanishi, Y.2    Fukuda, T.3
  • 15
    • 0000728680 scopus 로고
    • Surface characterization of carbon fibres and interfacial properties of carbon fibre composites
    • F. Nakao, Y. Takenaka, and H. Asai Surface characterization of carbon fibres and interfacial properties of carbon fibre composites Composites 23 5 1992 365 372
    • (1992) Composites , vol.23 , Issue.5 , pp. 365-372
    • Nakao, F.1    Takenaka, Y.2    Asai, H.3
  • 16
    • 81855218069 scopus 로고    scopus 로고
    • Mode II interfacial toughening through discontinuous interleaves for damage suppression and control
    • M. Yasaee, I.P. Bond, R.S. Trask, and E.S. Greenhalgh Mode II interfacial toughening through discontinuous interleaves for damage suppression and control Composites: Part A 43 2012 121 128
    • (2012) Composites: Part A , vol.43 , pp. 121-128
    • Yasaee, M.1    Bond, I.P.2    Trask, R.S.3    Greenhalgh, E.S.4
  • 17
    • 0028699733 scopus 로고
    • Mode II delamination toughness of carbon-fiber/epoxy composites with chopped Kevlar fiber reinforcement
    • M.S. Sohn, and X.Z. Hu Mode II delamination toughness of carbon-fiber/epoxy composites with chopped Kevlar fiber reinforcement Compos Sci Technol 52 1994 439 448
    • (1994) Compos Sci Technol , vol.52 , pp. 439-448
    • Sohn, M.S.1    Hu, X.Z.2
  • 18
    • 0033881122 scopus 로고    scopus 로고
    • Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors
    • DOI 10.1016/S0924-4247(99)00266-6
    • V.M. Murukeshan, P.Y. Chan, L.S. Ong, and L.K. Seah Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors Sensors Actuators 79 2000 153 161 (Pubitemid 30548943)
    • (2000) Sensors and Actuators, A: Physical , vol.79 , Issue.2 , pp. 153-161
    • Murukeshan, V.M.1    Chan, P.Y.2    Ong, L.S.3    Seah, L.K.4
  • 19
    • 84873650706 scopus 로고    scopus 로고
    • Adhesion strength of glass/epoxy composite embedded with heat-treated carbon black on the surface
    • S.W. Park, and D.G. Lee Adhesion strength of glass/epoxy composite embedded with heat-treated carbon black on the surface Composites: Part A 37 2006 1708 1721
    • (2006) Composites: Part A , vol.37 , pp. 1708-1721
    • Park, S.W.1    Lee, D.G.2
  • 20
    • 0036647594 scopus 로고    scopus 로고
    • Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors
    • DOI 10.1016/S1359-835X(02)00036-2, PII S1359835X02000362
    • S. Takeda, Y. Okabe, and N. Takeda Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors Composites: Part A 33 2002 971 980 (Pubitemid 34862492)
    • (2002) Composites - Part A: Applied Science and Manufacturing , vol.33 , Issue.7 , pp. 971-980
    • Takeda, S.1    Okabe, Y.2    Takeda, N.3
  • 21
    • 0036648009 scopus 로고    scopus 로고
    • Effect of thermal residual stress on the reflection spectrum from fiber Bragg grating sensors embedded in CFRP laminates
    • DOI 10.1016/S1359-835X(02)00038-6, PII S1359835X02000386
    • Y. Okabe, S. Yashiro, R. Tsuji, T. Mizutani, and N. Takeda Effect of thermal residual stress on the reflection spectrum from fiber Bragg grating sensors embedded in CFRP laminates Composites: Part A 33 2002 991 999 (Pubitemid 34862494)
    • (2002) Composites - Part A: Applied Science and Manufacturing , vol.33 , Issue.7 , pp. 991-999
    • Okabe, Y.1    Yashiro, S.2    Tsuji, R.3    Mizutani, T.4    Takeda, N.5
  • 22
    • 79957700525 scopus 로고    scopus 로고
    • Development of the hybrid composite sandwich satellite structures
    • J.W. Lim, and D.G. Lee Development of the hybrid composite sandwich satellite structures Composites: Part A 42 2011 1040 1048
    • (2011) Composites: Part A , vol.42 , pp. 1040-1048
    • Lim, J.W.1    Lee, D.G.2
  • 23
    • 0035421780 scopus 로고    scopus 로고
    • Embedded fibre Bragg grating sensors in advanced composite materials
    • DOI 10.1016/S0266-3538(01)00037-9, PII S0266353801000379
    • K.S.C. Kuang, R. Kenny, M.P. Whelan, W.J. Cantwell, and P.R. Chalker Embedded fibre Bragg grating sensors in advanced composite materials Compos Sci Technol 61 10 2001 1379 1387 (Pubitemid 32752948)
    • (2001) Composites Science and Technology , vol.61 , Issue.10 , pp. 1379-1387
    • Kuang, K.S.C.1    Kenny, R.2    Whelan, M.P.3    Cantwell, W.J.4    Chalker, P.R.5
  • 24
    • 79957707178 scopus 로고    scopus 로고
    • Reduction of thermal residual stress in carbon fiber aluminum laminates using a thermal expansion clamp
    • J. Xue, W. Wang, Y. Takao, and T. Matsubara Reduction of thermal residual stress in carbon fiber aluminum laminates using a thermal expansion clamp Composites: Part A 42 2011 986 992
    • (2011) Composites: Part A , vol.42 , pp. 986-992
    • Xue, J.1    Wang, W.2    Takao, Y.3    Matsubara, T.4
  • 25
    • 33144473791 scopus 로고    scopus 로고
    • Smart cure of thick composite filament wound structures to minimize the development of residual stresses
    • DOI 10.1016/j.compositesa.2005.05.017, PII S1359835X05001818, Internal Stresses in Polymer Composites
    • D.H. Lee, S.K. Kim, W.I. Lee, S.K. Ha, and S.W. Tsai Smart cure of thick composite filament wound structures to minimize the development of residual stresses Composites: Part A 37 2006 530 537 (Pubitemid 43267869)
    • (2006) Composites Part A: Applied Science and Manufacturing , vol.37 , Issue.4 , pp. 530-537
    • Lee, D.H.1    Kim, S.K.2    Lee, W.I.3    Ha, S.K.4    Tsai, S.W.5
  • 26
    • 33748905108 scopus 로고    scopus 로고
    • Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress
    • DOI 10.1016/j.compositesa.2005.09.015, PII S1359835X05003702
    • H.S. Kim, S.W. Park, and D.G. Lee Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress Composites: Part A 37 2006 1708 1721 (Pubitemid 44425433)
    • (2006) Composites Part A: Applied Science and Manufacturing , vol.37 , Issue.10 , pp. 1708-1721
    • Kim, H.S.1    Park, S.W.2    Lee, D.G.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.