Emission of titanium dioxide nanoparticles from building materials to the environment by wear and weather

Environmental Science and Technology

Volumn 49, Issue 4, 2015, Pages 2163-2170

  Shandilya, Neeraj ^a,b   Le Bihan, Olivier ^a   Bressot, Christophe ^a   Morgeneyer, Martin ^b  

^a INSTITUT NATIONAL DE L ENVIRONNEMENT INDUSTRIEL ET DES RISQUES INERIS   (France)

^b SORBONNE UNIVERSITÉ   (France)

Author keywords

[No Author keywords available]

Indexed keywords

DETERIORATION; NANOPARTICLES; OXIDE MINERALS; TITANIUM DIOXIDE; WEAR OF MATERIALS; WEATHERING;

EMISSION TRANSITION; LINEAR EXTRAPOLATION; NANOPARTICLE EMISSIONS; PARTICLE EMISSIONS; PHOTO-CATALYTIC; REMOVAL MECHANISM; STABLE EMISSIONS; STRUCTURAL DETERIORATION;

TIO2 NANOPARTICLES;

NANOCOATING; NANOPARTICLE; TITANIUM DIOXIDE NANOPARTICLE; WATER; AIR POLLUTANT; PARTICULATE MATTER; TITANIUM; TITANIUM DIOXIDE;

ANATASE; ATMOSPHERIC POLLUTION; CATALYSIS; CONCENTRATION (COMPOSITION); CONSTRUCTION MATERIAL; NANOTECHNOLOGY; PARTICULATE FLUX; PHOTOCHEMISTRY; POLLUTION INCIDENCE;

AIR; ARTICLE; BUILDING MATERIAL; ENVIRONMENTAL TEMPERATURE; LEACHING; PHOTOCATALYSIS; PREDICTION; WEATHER; WEATHERING; AIR POLLUTANT; ANALYSIS; CHEMISTRY; DEVICE FAILURE ANALYSIS; PARTICULATE MATTER; PROCEDURES; STATISTICS AND NUMERICAL DATA; TIME;

AIR POLLUTANTS; CONSTRUCTION MATERIALS; EQUIPMENT FAILURE ANALYSIS; NANOPARTICLES; PARTICULATE MATTER; TIME FACTORS; TITANIUM; WEATHER;

EID: 84923103852     PISSN: 0013936X     EISSN: 15205851     Source Type: Journal    
DOI: 10.1021/es504710p     Document Type: Article

References (45)

1. Torgal, F. P.; Jalali, S. Eco-efficient construction and building materials Constr. Build. Mater. 2011, 25, 582-590
2. Stamate, M.; Lazar, G. Application of titanium dioxide photocatalysis to create self- cleaning materials Modell. Otpim. Mach. Build. Field (MOCM) 2007, 13 (3) 280-285
3. Vorbau, M.; Hillemann, L.; Stintz, M. Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings Aerosol Sci. 2009, 40, 209-217
4. Shandilya, N.; Le Bihan, O.; Morgeneyer, M. A review on the study of the generation of (nano-) particles aerosols during the mechanical solicitation of materials J. Nanomater. 2014, 289108
5. Le Bihan, O.; Shandilya, N.; Gheerardyn, L.; Guillon, O.; Dore, E.; Morgeneyer, M. Investigation of the Release of Particles from a Nanocoated Product Adv. Nanopart. 2013, 2, 39-44
6. Göhler, D.; Nogowski, A.; Fiala, P.; Stintz, M. Nanoparticle release from nanocomposites due to mechanical treatment at two stages of the life-cycle J. Phys. Conf. Ser. 2013, 429 012045 10.1088/1742-6596/429/1/012045
7. Allen, N. S.; Edge, M.; Corrales, T.; Childs, A.; Liauw, C. M.; Catalina, F.; Peinado, C.; Minihan, A.; Aldcroft, D. Ageing and stabilisation of filled polymers: An overview Polym. Degrad. Stab. 1998, 61, 183-199
8. Allen, N. S.; Edge, M.; Ortega, A.; Sandoval, G.; Liauw, C. M.; Verran, J.; Stratton, J.; McIntyre, R. B. Degradation and stabilisation of polymers and coatings: Nano versus pigmentary titania particles Polym. Degrad. Stab. 2004, 85, 927-946
9. 2 nanopowder coating materials J. Nanopart. Res. 2007, 9, 157-163
10. 2 by weathering Environ. Sci. Process Impact 2013, 15, 2186-2193
11. 2 nanoparticle emission from exterior facades into the aquatic environment Environ. Pollut. 2008, 156, 233-239
12. Hirth, S.; Cena, L.; Cox, G.; Tomovic, Z.; Peters, T.; Wohlleben, W. Scenarios and methods that induce protruding or released CNTs after degradation of nanocomposite materials J. Nanopart. Res. 2013, 15, 1504-1518
13. Wohlleben, W.; Brill, S.; Meier, M. W.; Mertler, M.; Cox, G.; Hirth, S.; von Vacano, B.; Strauss, V.; Treumann, S.; Wiench, K.; Ma-Hock, L.; Landsiedel, R. On the lifecycle of nanocomposites: Comparing released fragments and their in vivo hazards from three release mechanisms and four nanocomposites Small 2011, 7, 2384-2395
14. 2 Environ. Sci. Technol. 2014, 48, 6710-6718
15. 2 nanoparticles from sunscreens into surface waters: A one-year survey at the old danube recreational lake Environ. Sci. Technol. 2014, 48, 5415-5422
16. 2- (nano)particles from textiles into artificial sweat under physical stress: experiments and exposure modeling Environ. Sci. Technol. 2013, 47, 9979-9987
17. Windler, L.; Lorenz, C.; von Goetz, N.; Hungerbuhler, K.; Amberg, M.; Heuberger, M.; Nowack, B. Release of titanium dioxide from textiles during washing Environ. Sci. Technol. 2012, 46, 8181-8188
18. Zhang, W.; Crittenden, J.; Li, K. G.; Chen, Y. S. Attachment efficiency of nanoparticle aggregation in aqueous dispersions: Modeling and experimental validation Environ. Sci. Technol. 2012, 46, 7054-7062
19. Stefano, Z.; Marco, G.; Arlen, F.; Luan, G. Leaching of nanoparticles from experimental water-borne paints under laboratory test conditions J. Nanopart. Res. 2013, 16, 2185
20. 2 nanoparticles in human hepatoma HepG2 cells Nanotoxicology 2011, 5, 341-353
21. 2 nanoparticles in wistar rats Biol. Trace Elem. Res. 2011, 143, 1682-1694
22. 2 particle formulations Toxicol. Sci. 2005, 88, 514-524
23. Yamashita, K.; Yoshioka, Y.; Higashisaka, K.; Mimura, K.; Morishita, Y.; Nozaki, M.; Yoshida, T.; Ogura, T.; Nabeshi, H.; Nagano, K.; Abe, Y.; Kamada, H.; Monobe, Y.; Imazawa, T.; Aoshima, H.; Shishido, K.; Kawai, Y.; Mayumi, T.; Tsunoda, S.; Itoh, N.; Yoshikawa, T.; Yanagihara, I.; Saito, S.; Tsutsumi, Y. Silica and titanium dioxide nanoparticles cause pregnancy complications in mice Nat. Nanotechnol. 2011, 6, 321-328
24. Barnard, A. S. One-to-one comparison of sunscreen efficacy, aesthetics and potential nanotoxicity Nat. Nanotechnol. 2010, 5, 271-274
25. Auffan, M.; Rose, J.; Bottero, J. Y.; Lowry, G. V.; Jolivet, J. P.; Wiesner, M. R. Towards a definition of inorganic nanoparticles from an environmental, health and safety perspective Nat. Nanotechnol 2009, 4, 634-641
26. AFNOR.Paints and varnishes-Methods of exposureto laboratory light sources-Part 1: General guidance; ISO16474-1; (2012.
27. Morgeneyer, M.; Shandilya, N.; Chen, Y. M.; Le Bihan, O. Use of a modified Taber abrasion apparatus for investigating the complete stress state during abrasion and in-process wear particle aerosol generation Chem. Eng. Res. Des. 2015) 93, 251-256
28. ASTM International. Standardtest method for the abrasion of organic coatings by theTaber Abradant; ASTM D 4060; (2007.
29. ASTM International. Standard test method for dry abrasion mar resistance of high glosscoatings; ASTM D 6037; (1996.
30. ASTM International. Standard test method for resistance of transparent plastics tosurface abrasion; ASTM D 1044; (2008.
31. Golanski, L.; Guiot, A.; Pras, M.; Malarde, M.; Tardif, F. Release-ability of nano fillers from different nanomaterials (toward the acceptability of nanoproduct) J. Nanopart. Res. 2012) 14, 962-970
32. Hassan, M. M.; Dylla, H.; Mohammad, L. N.; Rupnow, T. Evaluation of the durability of titanium dioxide photocatalyst coating for concrete pavement Constr. Build. Mater. 2010, 24, 1456-1461
33. Morgeneyer, M.; Le Bihan, O.; Ustache, A.; Aguerre Chariol, O. Experimental study of the aerosolization of fine alumina particles from bulk by a vortex shaker Powder Technol. 2013, 246, 583-589
34. Le Bihan, O.; Morgeneyer, M.; Shandilya, N.; Aguerre Chariol, O.; Bressot, C. In Handbook of Nanosafety: Measurement, Exposure and Toxicology; Vogel, U.; Savolainen, K.; Wu, Q.; Van Tongeren, M.; Brouwer, D.; Berges, M., Eds.; Academic Press: San Diego, CA, 2014; Chapt. 7.
35. Göhler, D.; Stintz, M.; Hillemann, L.; Vorbau, M. Characterization of nanoparticle release from surface coatings by the simulation of a sanding process Ann. Occup. Hyg. 2010, 54, 615-624
36. R'mili, B.; Le Bihan, O.; Dutouquet, C.; Aguerre Charriol, O.; Frejafon, E. Sampling by TEM grid filtration Aerosol Sci. Technol. 2013, 47, 767-775
37. Shandilya, N.; Le Bihan, O.; Morgeneyer, M. Effect of the normal load on the release of aerosol wear particles during abrasion Tribol. Lett. 2014, 55, 227-234
38. Brockmann, J. E. In Aerosol Measurement: Principles, Techniques and Applications; Kulkarni, P.; Baron, P. A.; Willeke, K., Eds.; John Wiley & Sons: Hoboken, NJ, 2011; Chapt. 6.
39. White, L. R. Capillary rise in powders J. Colloid Interface Sci. 1982, 90, 536-538
40. Murray, M. Cracking in coatings from colloidal dispersions: An industrial perspective. Proceedings Rideal Lecture, London, April 20, 2009.
41. Dufresne, E. R.; Corwin, E. I.; Greenblatt, N. A.; Ashmore, J.; Wang, D. Y.; Dinsmore, A. D.; Cheng, J. X.; Xie, X. S.; Hutchinson, J. W.; Weitz, D. A. Flow and fracture in drying nanoparticle suspensions Phys. Rev. Lett. 2003, 91 224501
42. Tirumkudulu, M. S.; Russel, W. B. Cracking in drying latex films Langmuir 2005, 21, 4938-4948
43. Hare, C. H. The degradation of coatings by ultraviolet light and electromagnetic radiation. J. Prot. Coat. Linings 1992, (May).
44. 2 photocatalytic nanocoatings under abrasion J. Nanomater. 2014, 185080
45. Tomasetta, I.; Barletta, D.; Lettieri, P.; Poletto, M. The measurement of powder flow properties with a mechanically stirred aerated bed Chem. Eng. Sci. 2012, 69, 373-381