Detection of localized bearing faults in induction machines by spectral kurtosis and envelope analysis of stator current

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 3, 2015, Pages 1855-1865

  Leite, Valéria C M N ^a   Borges Da Silva, Jonas Guedes ^b   Veloso, Giscard Francimeire Cintra ^c   Borges Da Silva, Luiz Eduardo ^c   Lambert Torres, Germano ^b   Bonaldi, Erik Leandro ^b   De Lacerda De Oliveira, Levy Ely ^b  

^a INSTITUTO DE AERONÁUTICA E ESPAÇO   (Brazil)

^b PS Solutions   (Brazil)

^c FEDERAL UNIVERSITY OF ITAJUBÁ   (Brazil)

Author keywords

Ball bearings; condition monitoring; fault detection; fault diagnosis; induction motors; kurtosis; signal processing; spectral analysis

Indexed keywords

ASYNCHRONOUS MACHINERY; BALL BEARINGS; CONDITION MONITORING; ELECTRIC FAULT CURRENTS; FAILURE ANALYSIS; HIGHER ORDER STATISTICS; INDUCTION MOTORS; OUTAGES; SIGNAL PROCESSING; SPECTRUM ANALYSIS; STATORS;

BEARING FAULT DETECTION; ELECTRICAL MACHINE; ENVELOPE ANALYSIS; EXPERIMENTAL TEST; INDUCTION MACHINES; KURTOSIS; SPECTRAL KURTOSIS; THREE PHASE INDUCTION MOTOR;

FAULT DETECTION;

EID: 84922901674     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2014.2345330     Document Type: Article

References (43)

1. B. Lu, D. B. Durocher, and P. Stemper, "Predictive maintenance techniques," IEEE Ind. Appl. Mag., vol. 15, no. 6, pp. 52-60, Nov./Dec. 2009.
2. A. Bellini, F. Filippetti, C. Tassoni, and G.-A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
3. J. Antonio-Daviu, S. Aviyente, E. G. Strangas, and M. Riera-Guasp, "Scale invariant feature extraction algorithm for the automatic diagnosis of rotor asymmetries in induction motors," IEEE Trans. Ind. Informat., vol. 9, no. 1, pp. 100-108, Feb. 2013.
4. C. Chaochao, Z. Bin, G. Vachtsevanos, and M. Orchard, "Machine condition prediction based on adaptive neuro-fuzzy and high-order particle filtering," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4353-4364, Sep. 2011.
5. D. P. Filev, R. B. Chinnam, F. Tseng, and P. Baruah, "An industrial strength novelty detection framework for autonomous equipment monitoring and diagnostics," IEEE Trans. Ind. Informat., vol. 6, no. 4, pp. 767-779, Nov. 2010.
6. B. Zhang et al., "A probabilistic fault detection approach: Application to bearing fault detection," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 2011-2018, May 2011.
7. "Report of large motor reliability survey of industrial and commercial installations, Part I," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853-864, Jul. 1985.
8. M. Cococcioni, B. Lazzerini, and S. L. Volpi, "Robust diagnosis of rolling element bearings based on classification techniques," IEEE Trans. Ind. Informat., vol. 9, no. 4, pp. 2256-2263, Nov. 2013.
9. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors-A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005.
10. M. D. Prieto, G. Cirrincione, A. G. Espinosa, J. Ortega, and H. Henao, "Bearing fault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3398-3407, Aug. 2013.
11. R. B. Randall, Vibration-Based Condition Monitoring: Industrial, Aerospace and Automotive Applications. Chichester, U.K.: Wiley, 2011, pp. 24-62, pp. 167-227.
12. W. Zhou, T. G. Habetler, and R. G. Harley, "Bearing fault detection via stator current noise cancellation and statistical control," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4260-4269, Dec. 2008.
13. L. Frosini and E. Bassi, "Stator current and motor efficiency as indicators for different types of bearings faults in induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 244-251, Jan. 2010.
14. F. Immovilli, M. Cocconcelli, A. Bellini, and R. Rubini, "Detection of generalized-roughness bearing fault by spectral-kurtosis energy of vibration or current signals," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4710-4717, Nov. 2009.
15. M. Blodt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1813-1822, Apr. 2008.
16. W. Zhou, T. G. Habetler, and R. G. Harley, "Bearing condition monitoring methods for electric machines: A general review," in Proc. IEEE SDEMPED, Krakow, Poland, 2007, pp. 3-6.
17. C. Bianchini, F. Immovilli, M. Cocconcelli, R. Rubini, and A. Bellini, "Fault detection of linear bearings in brushless AC linear motors by vibration analysis," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1684-1694, May 2011.
18. X. Jin, M. Zhao, T. W. S. Chow, and M. Pecht, "Motor bearing fault diagnosis using trace ratio linear discriminant analysis," IEEE Trans. Ind. Electron., vol. 61, no. 5, pp. 2441-2451, May 2014.
19. D. He, R. Li, and J. Zhu, "Plastic bearing fault diagnosis based on a two-step data mining approach," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3429-3440, Aug. 2013.
20. A. Soualhi, H. Razik, G. Clerc, and D. D. Doan, "Prognosis of bearing failures using hidden Markov models and the adaptive neuro-fuzzy inference system," IEEE Trans. Ind. Electron., vol. 61, no. 6, pp. 2864-2874, Jun. 2014.
21. E. L. Bonaldi, L. E. L. Oliveira, B. da Silva, G. Lambert-Torres, and L. E. B. da Silva, "Detecting load failures using the induction motor as a transducer," in Proc. ICARCV, Hanoi, Vietnam, 2008, pp. 196-199.
22. F. Immovilli, A. Bellini, R. Rubini, and C. Tassoni, "Diagnosis of bearing faults in induction machines by vibration or current signals: A critical comparison," IEEE Trans. Ind. Appl., vol. 46, no. 4, pp. 1350-1359, Jul./Aug. 2010.
23. X. Gong and W. Qiao, "Bearing fault diagnosis for direct-drive wind turbines via current-demodulated signals," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3419-3428, Aug. 2013.
24. L. Saidi, F. Fnaiech, G.-A. Capolino, and H. Henao, "Stator current bi-spectrum patterns for induction machines multiple-faults detection," in Proc. IEEE IECON, Montreal, QC, Canada, 2012, pp. 5132-5137.
25. A. Bouzida et al., "Fault diagnosis in industrial induction machines through discrete wavelet transform," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4385-4395, Sep. 2011.
26. W. Yang, P. Tavner, C. Crabtree, and M. Wilkinson, "Cost-effective condition monitoring for wind turbines," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 263-271, Jan. 2010.
27. A. Soualhi, G. Clerc, and H. Razik, "Detection and diagnosis of faults in induction motor using an improved artificial ant clustering technique," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4053-4062, Sep. 2013.
28. J. Pons-Llinares, J. A. Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and V. Climente-Alarcon, "Induction motor diagnosis based on a transient current analytic wavelet transform via frequency B-splines," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1530-1544, May 2011.
29. W. Sui and D. Zhang, "Research on envelope analysis for bearings fault detection," in Proc. ICCSE, Hefei, China, 2010, pp. 973-976.
30. T. Barszcz and A. Jaboñski, "A novel method for the optimal band selection for vibration signal demodulation and comparison with the kurtogram," Mech. Syst. Signal Process., vol. 25, no. 1, pp. 431-451, Jan. 2011.
31. J. Antoni, "Fast computation of the kurtogram for the detection of transient faults," Mech. Syst. Signal Process., vol. 21, no. 1, pp. 108-124, Jan. 2007.
32. N. Sawalhi, "Rolling element bearings: Diagnostic, prognostic and fault simulations," Ph.D. dissertation, Faculty Eng. Mech. Manuf. Eng., Univ. New South Wales, Sydney, Australia, 2007.
33. R. Schoen, T. Habetler, F. Kamran, and R. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
34. M. Pineda-Sanchez et al., "Application of the Teager-Kaiser energy operator to the fault diagnosis of induction motors," IEEE Trans. Ind. Electron., vol. 28, no. 4, pp. 1036-1044, Dec. 2013.
35. P. Borghesani, P. Pennacchi, R. Ricci, and S. Chatterton, "Testing second order cyclostationarity in the squared envelope spectrum of non-white vibration signals," Mech. Syst. Signal Process., vol. 40, no. 1, pp. 38-55, Oct. 2013.
36. V. Vrabi, P. Granjon, C.-S. Maroni, and B. Leprettre, "Application of spectral kurtosis to bearing fault detection in induction motors," in Proc. Surveillance 5, 2004, pp. 1-10.
37. W. Taiyong and L. Jinzhou, "Fault diagnosis of rolling bearings based on wavelet packet and spectral kurtosis," in Proc. ICICTA, Shenzhen, China, 2011, pp. 665-669.
38. J. Antoni, "The spectral kurtosis: A useful tool for characterizing non-stationary signals," Mech. Syst. Signal Process., vol. 20, no. 2, pp. 282-307, Feb. 2006.
39. F. Millioz and N. Martin, "Circularity of the STFT and spectral kurtosis for time-frequency segmentation in Gaussian environment," IEEE Trans. Signal Process., vol. 59, no. 2, pp. 515-524, Feb. 2011.
40. J. Cusidó, L. Romeral, J. A. Ortega, J. A. Rosero, and A. G. Espinosa, "Fault detection in induction machines using power spectral density in wavelet decomposition," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 633-643, Feb. 2008.
41. J.-L. Dion, I. Tawfiq, and G. Chevallier, "Harmonic component detection: Optimized spectral kurtosis for operational modal analysis," Mech. Syst. Signal Process., vol. 26, pp. 24-33, Jan. 2012.
42. T. Boukra, A. Lebaroud, and G. Clerc, "Statistical and neural-network approaches for the classification of induction machine faults using the ambiguity plane representation," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4034-4042, Sep. 2013.
43. F. Immovilli, C. Bianchini, M. Cocconcelli, A. Bellini, and R. Rubini, "Bearing fault model for induction motor with externally induced vibration," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3408-3418, Aug. 2013.