Tool wear patterns when turning of titanium alloy using sustainable lubrication strategies

International Journal of Precision Engineering and Manufacturing

Volumn 15, Issue 9, 2014, Pages 1979-1985

  Raza, Syed Waqar ^a   Pervaiz, Salman ^a,b   Deiab, Ibrahim ^c  

^a AMERICAN UNIVERSITY OF SHARJAH   (United Arab Emirates)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^c UNIVERSITY OF GUELPH   (Canada)

Author keywords

Cooling strategies; Lubrication; Sustainable machining; Titanium alloys; Tool wear

Indexed keywords

CARBIDE CUTTING TOOLS; CRYOGENICS; EMULSIFICATION; LUBRICATION; TITANIUM ALLOYS; TURNING; VEGETABLE OILS; WEAR OF MATERIALS;

COOLING STRATEGY; CRYOGENIC MACHINING; ENVIRONMENTALLY BENIGN; HIGH SPEED; TITANIUM TI-6AL-4V; TOOL WEAR;

CUTTING TOOLS;

EID: 84919918263     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-014-0554-z     Document Type: Article

References (28)

1. Arcam EBM System, “Ti6A14V Titanium Alloy,” http://www.arcam.com/wp-content/uploads/Arcam-Ti6Al4V-Titanium-Alloy.pdf (Accessed 30 JUL 2014)
2. Richt, C., “Turning Titanium-Developments in Application Technology,” http://www2.coromant.sandvik.com/coromant/pdf/Aerospace/tekn_art_titan.pdf (Accessed 18 AUG 2014)
3. Feng, S. C. and Hattori, M., “Cost and Process Information Modeling for Dry Machining,” http://www.mel.nist.gov/div826/library/doc/cost_process.pdf (Accessed 30 JUL 2014)
4. Klocke, F. and Eisenblätter, G., “Dry Cutting,” CIRP Annals-Manufacturing Technology, Vol. 46, No. 2, pp. 519–526, 1997.
5. Byrne, G. and Scholta, E., “Environmentally Clean Machining Processes-a Strategic Approach,” CIRP Annals-Manufacturing Technology, Vol. 42, No. 1, pp. 471–474, 1993.
6. Pusavec, F., Kramar, D., Krajnik, P., and Kopac, J., “Transitioning to Sustainable Production-Part II: Evaluation of Sustainable Machining Technologies,” Journal of Cleaner Production, Vol. 18, No. 12, pp. 1211–1221, 2010.
7. Shokrani, A., Dhokia, V., and Newman, S. T., “Environmentally Conscious Machining of Difficult-to-Machine Materials with Regard to Cutting Fluids,” International Journal of Machine Tools and Manufacture, Vol. 57, No. pp. 83–101, 2012.
8. Zhang, S., Li, J., and Wang, Y., “Tool Life and Cutting Forces in End Milling Inconel 718 Under Dry and Minimum Quantity Cooling Lubrication Cutting Conditions,” Journal of Cleaner Production, Vol. 32, pp. 81–87, 2012.
9. Weinert, K., Inasaki, I., Sutherland, J., and Wakabayashi, T., “Dry Machining and Minimum Quantity Lubrication,” CIRP Annals-Manufacturing Technology, Vol. 53, No. 2, pp. 511–537, 2004.
10. Andriya, N., Rao, P. V., and Ghosh, S., “Dry Machining of Ti-6Al-4V using PVD Coated TiAlN Tools,” Proc. of the World Congress on Engineering, 2012.
11. Siniawski, M. and Bowman, C., “Metal Working Fluids: Finding Green in the Manufacturing Process,” Industrial Lubrication and Tribology, Vol. 61, No. 2, pp. 60–66, 2009.
12. Safian, S., Hisyam, M. A., and Amsn, S., “Evaluation of Vegetable Oil as an Alternative Cutting Lubricant when End Milling Martensutic Stainless Steel Using Uncoated Carbide Tool,” Journal of Advanced Manufacturing Technology, Vol. 3, No. 2, pp. 49–55, 2009.
13. Lawal, S. A., Choudhury, I. A., and Nukman, Y., “A Critical Assessment of Lubrication Techniques in Machining Processes: a Case for Minimum Quantity Lubrication using Vegetable Oil-based Lubricant,” Journal of Cleaner Production, Vol. 41, pp. 210–221, 2013.
14. Venugopal, K., Paul, S., and Chattopadhyay, A., “Tool Wear in Cryogenic Turning of Ti-6Al-4V Alloy,” Cryogenics, Vol. 47, No. 1, pp. 12–18, 2007.
15. Bermingham, M. J., Palanisamy, S., Kent, D., and Dargusch, M., “A Comparison of Cryogenic and High Pressure Emulsion Cooling Technologies on Tool Life and Chip Morphology in Ti-6Al-4V Cutting,” Journal of Materials Processing Technology, Vol. 212, No. 4, pp. 752–765, 2012.
16. Hong, S. Y., Ding, Y., and Jeong, W. C., “Friction and Cutting Forces in Cryogenic Machining of Ti-6Al-4V,” International Journal of Machine Tools and Manufacture, Vol. 41, No. 15, pp. 2271–2285, 2001.
17. Burton, F. and Jun, M. B. G., “Feasibility of Vegetable Oil in Water Emulsion Achieved through Ultrasonic Atomization as Cutting Fluids,” Proc. of 40th North American Manufacturing Research Conference, pp. 251–258, 2012.
18. Kalyan Kumar, K. and Choudhury, S., “Investigation of Tool Wear and Cutting Force in Cryogenic Machining using Design of Experiments,” Journal of Materials Processing Technology, Vol. 203, No. 1, pp. 95–101, 2008.
19. Pervaiz, S., Deiab, I., and Darras, B., “Power Consumption and Tool Wear Assessment when Machining Titanium Alloys,” Int. J. Precis. Eng. Manuf., Vol. 14, No. 6, pp. 925–936, 2013.
20. Sandvick, “Cutting Materials: General Information,” http://www2.coromant.sandvik.com/coromant/pdf/smallparts/catalogue/P127-132.pdf (Accessed 30 JUL 2014)
21. Donachie, M. J., “Titanium: A Technical Guide,” ASM International, 2nd Ed., pp. 82, 2000.
22. Accu-Svenska AB, “Material Safety Data Sheet,” http://www.accusvenska.se/downloaddatasheet/70 (Accessed 18 AUG 2014)
23. Arrazola, P. J., Garay, A., Iriarte, L. M., Armendia, M., Marya, S., and Le Maitre, F., “Machinability of Titanium Alloys (Ti6Al4V and Ti555. 3),” Journal of Materials Processing Technology, Vol. 209, No. 5, pp. 2223–2230, 2009.
24. Boswell, B. and Chandratilleke, T. T., “Air-Cooling used for Metal Cutting,” American Journal of Applied Sciences, Vol. 6, No. 2, pp. 251, 2009.
25. ISO NO. 3685, “Tool-Life Testing with Single-Point Turning Tools,” 1993.
26. Ingle, S. S., “The Micromechanisms of Cemented Carbide Cutting Tool Wear,” Ph.D. Thesis, Department of Materials Science and Engineering, McMaster University, 1993.
27. Su, Y., He, N., Li, L., Iqbal, A., Xiao, M., Xu, S., and Qiu, B., “Refrigerated Cooling Air Cutting of Difficult-to-Cut Materials,” International Journal of Machine Tools and Manufacture, Vol. 47, No. 6, pp. 927–933, 2007.
28. Armendia, M., Garay, A., Iriarte, L. M., and Arrazola, P. J., “Comparison of the Machinabilities of Ti6Al4V and TIMETAL® 54M using Uncoated WC-Co Tools,” Journal of Materials Processing Technology, Vol. 210, No. 2, pp. 197–203, 2010.