Power consumption and tool wear assessment when machining titanium alloys

International Journal of Precision Engineering and Manufacturing

Volumn 14, Issue 6, 2013, Pages 925-936

  Pervaiz, Salman ^a,b   Deiab, Ibrahim ^a   Darras, Basil ^a  

^a AMERICAN UNIVERSITY OF SHARJAH   (United Arab Emirates)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Energy consumption; Machinability; Titanium; Wear mechanisms

Indexed keywords

AEROSPACE INDUSTRY; CORROSION; DESIGN OF EXPERIMENTS; ELECTRIC POWER UTILIZATION; ENERGY UTILIZATION; HIGH STRENGTH ALLOYS; MACHINABILITY; SCANNING ELECTRON MICROSCOPY; SPRAYED COATINGS; SURFACE ROUGHNESS; THERMAL CONDUCTIVITY; TITANIUM; TITANIUM ALLOYS; TRIBOLOGY; WEAR OF MATERIALS;

CUTTING CONDITIONS; CUTTING FORCES; DIFFICULT-TO-CUT MATERIALS; ELEVATED TEMPERATURE; EROSION PROPERTIES; LOW THERMAL CONDUCTIVITY; TOOL WEAR MECHANISM; WEAR MECHANISMS;

CUTTING TOOLS;

EID: 84892864595     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-013-0122-y     Document Type: Article

References (31)

1. Jaferry, S. I. and Mativenga, P. T., "Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach," International Journal of Advance Manufacturing Technology, Vol. 40, No. 7-8, pp. 687-696, 2009.
2. Machado, A. R. and Wallbank, J., "Machining of titanium and its alloys - a review," Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 204, No. 1, pp. 53-60, 1990.
3. Dahmus, J. B. and Gutowski, T. G., "An environmental analysis of machining," Proc. of IMECE, ASME International Mechanical Engineering Congress and RD & D Expo, 2004.
4. Munoz, A. A. and Sheng, P., "An analytical approach for determining the environmental impact of machining processes," Journal of Materials Processing Technology, Vol. 53, No. 3-4, pp. 736-758, 1995.
5. Kordonowy, D. N., "A power assessment of machining tools," Bachelor of Science Thesis in Mechanical Engineering, Massachusetts Institute of Technology, 2002.
6. Drake, R., Yildirim, M. B., Twomey, J. M., Whitman, L. E., Ahmad, J. S., and Lodhia, P., "Data collection framework on energy consumption in manufacturing," Proceedings from Institute of Industrial Engineers Research Conference, 2006.
7. Diaz, N., Redelsheimer, E., and Dornfeld, D., "Energy consumption characterization and reduction strategies for milling machine tool use," Proc. of the 18th CIRP International Conference on Life Cycle Engineering, pp. 263-267, 2011.
8. Diaz, N., Choi, S., Helu, M., Chen, Y., Jayanathan, S., Yasui, Y., Kong, D., Pavanaskar, S., and Dornfeld, D., "Machine tool design and operation stragtegies for green manufacturing," Proc. of the 4th CIRP International Conference on High Performance Cutting, 2011.
9. Kara, S. and Li, W., "Unit process energy consumption models for material removal processes," CIRP Annals -Manufacturing Technology, Vol. 60, No. 1, pp. 37-40, 2011.
10. Shan, Z., Qin, S., Liu, Q., and Liu, F., "Key manufacturing technology & equipment for energy saving and emissions reduction in mechanical equipment industry," Int. J. Precis. Eng. Manuf., Vol. 13, No. 7, pp. 1095-1100, 2012.
11. Jawaid, A., Che-Haron, C. H., and Abdullah, A., "Tool wear characteristics in turning of Titanium Alloy Ti -6246," Journal of Materials Processing Technology, Vol. 92-93, pp. 329-334, 1999.
12. Corduan, N., Himbart, T., Poulachon, G., Dessoly, M., Lambertin, M., Vigneau, J., and Payoux, B., "WearMechanisms of New Tool Materials for Ti-6AI-4V High Performance Machining," CIRP Annals -Manufacturing Technology, Vol. 52, No. 1, pp. 73-76, 2003.
13. Hwang, Y. K., Lee, C. M., and Park, S. H., "Evaluation of machinability according to the changes in machine tools and cooling lubrication environments and optimization of cutting conditions using Taguchi method," Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 65-73, 2009.
14. Elmagrabi, N., Che-Hassan, C. H., Jaharah, A. G., and Shuaeib, F. M., "High speed milling of Ti 6Al 4V using coated carbide tools," European Journal of Scientific Research, Vol. 22, No 2, pp. 153-162, 2008.
15. Klocke, F. and Zinkann, V., "Hochgeschwindigkeitsbearbeitung ändert die Spanbildung," VDI-Z, Vol. 141, No. 3-4, pp. 30-34, 1999.
16. Zhang, S., Li, J. F., Deng, J. X., and Li, Y. S., "Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools," International Journal of Advanced Manufacturing Technology, Vol. 44, No. 1-2, pp. 17-25, 2009.
17. Jiang, H. and Shivpuri, R., "A cobalt diffusion based model for predicting crater wear of carbide tools in machining titanium alloys," J. Eng. Mater. Technol., Vol. 127, No. 1, pp. 136-144, 2005.
18. Boothroyd, G., "Fundamentals of Machining and Machine Tools," 3rd edition, Winston Anthony Knigh, 2005.
19. Usui, E., "Progress of predictive theories in metal cutting," JSME Int. J. Ser., Vol. 31, No. 2, pp. 363-369, 1988.
20. Seah, K. H. W., Li, X., and Lee, K. S., "The effect of applying coolant on tool wear in metal machining," Journal of Material Processing and Technology, Vol. 48, No. 1-4, pp 495-501, 1995.
21. Tosun, N. and Huseyinoglu, M., "Effect of MQL on surface roughness in milling of AA7075-T6," Materials and Manufacturing Processes, Vol. 25, No. 8, pp. 793-798, 2010.
22. Benski, H. C., "Use of a normality test to identify significant effects in factorial designs," J. Quality Technology, Vol. 21, No. 3, pp. 174-178, 1989.
23. Fang, N. and Wu, W., "A comparative study of the cutting forces in high speed machining of Ti-6Al-4V and Inconel 718 with a round cutting edge tool," Journal of Material Processing and Technology, Vol. 209, No. 9, pp. 4385-4389, 2009.
24. Aneiro, F. M., Coelho, R. T., and Brandão, L. C., "Turning Hardened Steel Using Coated Carbide at High Cutting Speeds," Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 30, No. 2, 2008.
25. Komanduri, R. and Reed, Jr. W. R., "Evaluation of carbide grades and a new cutting geometry for machining Titanium alloys," Wear, Vol. 92, No. 1, pp. 113-123, 1983.
26. Groover, M. P., "Fundamentals of Modern Manufacturing," 2nd Edition, John Wiley & Sons, Inc., 2002.
27. Beno, T., Isaksson, M., and Pejryd, L., "Investigation of Minimal Quantity Lubrication in Turning of Waspaloy," Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses, pp. 305-310, 2007.
28. Shaw, M. C., "Metal Cutting Principles," 2nd Ed., Oxford Univ. Press, 2005.
29. Trigger, K. J. and Chao, B. T., "Mechanism of crater wear of cemented carbide tools," Transactions of ASME, Vol. 78, No. 5, 1956.
30. Konig, W., Fritsch, R., and Kammermeier, D., "Physically vapor deposited coatings on tools: performance and wear phenomena," Surface Coating Technology, Vol. 49, No. 1-3, pp. 316-324, 1991.
31. Liao, Y. S., Lin, H. M., and Wang, J. H., "Behavior of end milling Inconel 718 super alloy by cemented carbide tools," Journal of Material Processing Technology, Vol. 201, No. 1-3, pp. 460-465, 2008.