Utilization of natural montmorillonite modified with dimethyl, dehydrogenated tallow quaternary ammonium salt as reinforcement in almond shell flour-polypropylene bio-nanocomposites

Composites Part B: Engineering

Volumn 71, Issue , 2015, Pages 143-151

  Zahedi, Meysam ^a   Khanjanzadeh, Hossein ^a   Pirayesh, Hamidreza ^b   Saadatnia, Mohammad Ali ^b  

^a TARBIAT MODARES UNIVERSITY   (Iran)

^b BEHBAHAN KHATAM ALANBIA UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

A. Hybrid; A. Wood; B. Mechanical properties; E. Extrusion

Indexed keywords

CLAY MINERALS; COUPLING AGENTS; DISPERSIONS; LOADING; MECHANICAL PROPERTIES; NATURAL RESOURCES; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SHELLS (STRUCTURES); SILICATES; STRESS ANALYSIS; TENSILE STRENGTH; TRANSMISSION ELECTRON MICROSCOPY; WATER ABSORPTION; WOOD PRODUCTS;

A. HYBRID; E. EXTRUSION; LIGNOCELLULOSIC MATERIAL; MALEIC ANHYDRIDE GRAFTED POLYPROPYLENE; MECHANICAL AND PHYSICAL PROPERTIES; ORGANICALLY MODIFIED MONTMORILLONITE; PHYSICOMECHANICAL PROPERTIES; TENSILE AND FLEXURAL PROPERTIES;

POLYPROPYLENES;

EXTRUSION; MECHANICAL PROPERTIES; SCANNING ELECTRON MICROSCOPY; WOOD;

EID: 84919648116     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2014.11.009     Document Type: Article

References (42)

1. R. Hoto, G. Furundarena, J.P. Torres, E. Muñoz, J. Andrés, and J.A. García Flexural behavior and water absorption of asymmetrical sandwich composites from natural fibers and cork agglomerate core Mater Lett 127 2014 48 52
2. M. Zahedi, H. Pirayesh, H. Khanjanzadeh, and M. Mohseni Tabar Organo-modified montmorillonite reinforced walnut shell/polypropylene composites Mater Des 51 2013 803 809
3. L. Zhang, and Y. Hu Novel lignocellulosic hybrid particleboard composites made from rice straws and coir fibers Mater Des 55 2014 19 26
4. C. Homkhiew, T. Ratanawilai, and W. Thongruang The optimal formulation of recycled polypropylene/rubber wood flour composites from experiments with mixture design Compos Part B 56 2014 350 357
5. B. Del Saz-Orozco, M.V. Alonso, M. Oliet, and J.C. Domínguez Rodríguez Effects of formulation variables on density, compressive mechanical properties and morphology of wood flour-reinforced phenolic foams Compos Part B 56 2014 546 552
6. H. Pirayesh, and A. Khazaeian Using almond (Prunus amygdalus L.) shell as a biowaste resource in wood based composite Compos Part B 43 3 2011 1475 1479
7. M. Akgül Suitability of stinging nettle (Urtica dioica L.) stalks for medium density fiberboards production Compos Part B 45 1 2013 925 929
8. H. Pirayesh, A. Khazaeian, and T. Tabarsa The potential for using walnut (Juglans regia L.) shell as a raw material for wood-based particleboard manufacturing Compos Part B 43 8 2012 3276 3280
9. A. Ashori, S. Sheshmani, and F. Farhani Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes Carbohyd Polym 92 2013 865 871
10. A. Nourbakhsh, A. Ashori, and A. Kazemi Tabrizi Characterization and biodegradability of polypropylene composites using agricultural residues and waste fish Compos Part B 56 2014 279 283
11. M. Tajvidi, N. Motie, G. Rassam, R.H. Falk, and C. Felton Mechanical performance of hemp fiber polypropylene composites at different operating temperatures J Reinf Plast Compos 29 5 2010 664 674
12. A. Nourbakhsh, and A. Ashori Wood plastic composites from agro-waste materials: analysis of mechanical properties Biores Technol 101 2010 2525 2528
13. 2 filled rice husk/polypropylene composites: physico-mechanical properties Ind Crop Prod 33 2011 183 187
14. M. Madhoushi, H. Nadalizadeh, and M.P. Ansell Withdrawal strength of fasteners in rice straw fibre-thermoplastic composites under dry and wet conditions Polym Test 28 3 2009 301 306
15. M. Zabihzadeh, F. Dastoorian, and G. Ebrahimi Effect of MAPE on mechanical and morphological properties of wheat straw/HDPE injection molded composites J Reinf Plast Compos 29 1 2010 123 131
16. E. Önal, B. Burcu Uzun, and A. Eren Pütün Bio-oil production via co-pyrolysis of almond shell as biomass and high density polyethylene Energy Convers Manage 78 2014 704 710
17. Food and Agriculture organization of the United Nations. (FAOSTAT Database): < http://faostat.fao.org/ > (accessed July 2014).
18. A. Kaboorani, B. Riedl, P. Blanchet, M. Fellin, O. Hosseinaei, and S. Wang Nanocrystalline cellulose (NCC): a renewable nano-material for polyvinyl acetate (PVA) adhesive Eur Polym J 48 2012 1829 1837
19. H. Khanjanzadeh, T. Tabarsa, A. Shakeri, and A. Omidvar Effect of organoclay platelets on the mechanical properties of wood-plastic composites formulated with virgin and recycled polypropylene Wood Mater Sci Eng 6 2011 207 212
20. M.D. Tomić, B. Dunjić, V. Likić, J. Bajat, J. Rogan, and J. Djonlagić The use of nanoclay in preparation of epoxy anticorrosive coatings Prog Org Coat 77 2 2014 518 527
21. D.R. Paul, and L.M. Robeson Polym Nanotechnol: Nanocompos Polym 49 2008 3187 3204
22. J. Chen, and N. Yan Crystallization behavior of organo-nanoclay treated and untreated kraft fiber-HDPE composites Compos Part B: Eng 54 2013 180 187
23. H. Khanjanzadeh, T. Tabarsa, and A. Shakeri Morphology, dimensional stability and mechanical properties of polypropylene - wood flour composites with and without nanoclay J Reinf Plast Compos 31 5 2012 341 350
24. H. Khanjanzadeh, H. Pirayesh, and A. Salari Long term hygroscopic characteristics of polypropylene based hybrid composites with and without organo-modified clay Eur J Wood Prod 71 2013 211 218
25. Al Tcherbi-Narteh, M. Hosur, E. Triggs, P. Owuor, and S. Jelaani Viscoelastic and thermal properties of full and partially cured DGEBA epoxy resin composites modified with montmorillonite nanoclay exposed to UV radiation Polym Degrad Stab 101 2014 81 91
26. A. Nourbakhsh, A. Ashori, H. Ziaei Tabari, and F. Rezaei Mechanical and thermochemical properties of wood-flour/polypropylene blends Polym Bull 65 2010 691 700
27. British Standard. Wood-Plastics Composites (WPC) - Part 1: test methods for characterization of WPC materials and products; 2007. p. 17.
28. L. Dányádi, T. Janecska, Z. Szabó, G. Nagy, J. Móczó, and B. Pukánszky Wood flour filled PP composites: compatibilization and adhesion Compos Sci Technol 67 2007 2838 2846
29. S.M. Zabihzadeh, A. Omidvar, M.A.B. Marandi, S.M. Mirmehdi, and F. Dastoorian Physical and mechanical properties of rapeseed waste-filled LLDPE composites J Thermoplast Compos 24 2011 447 458
30. A. Ashori, H. Kiani, and S.A. Mozaffari Mechanical properties of reinforced polyvinyl chloride composites: effect of filler form and content J Appl Polym Sci 120 2011 1788 1793
31. A.R. Sanadi, J.F. Hunt, D.F. Caulfield, G. Kovacsvolgyi, and B. Destree Proceeding of sixth international conference on wood-fiber composites 2001 Forest Product Society Madison, WI 24
32. G.S. Venkatesh, A. Deb, A. Karmarkar, and S.S. Chauhan Effect of nanoclay content and compatibilizer on viscoelastic properties of montmorillonite/polypropylene nanocomposites Mater Des 37 2012 285 291
33. P.N.B. Reis, J.A.M. Ferreira, Z.Y. Zhang, T. Benameur, and M.O.W. Richardson Impact response of Kevlar composites with nanoclay enhanced epoxy matrix Compos Part B 46 2013 7 14
34. J. Chen, and N. Yan Mechanical properties and dimensional stability of organo-nanoclay modified biofiber polymer composites Compos Part B 47 2013 248 254
35. V. Ojijo, S.S. Ray, and R. Sadiku Effect of nanoclay loading on the thermal and mechanical properties of biodegradable polylactide/poly [(butylene succinate) - co-adipate] blend composites ACS Appl Mater Interface 4 5 2012 2395 2405
36. M. Iman, K.K. Bania, and T.K. Maji Green jute-based cross-linked soy flour nanocomposites reinforced with cellulose whiskers and nanoclay Ind Eng Chem Res 52 21 2013 6969 6983
37. B.K. Deka, and T.K. Maji Effect of coupling agent and nanoclay on properties of HDPE, LDPE, PP, PVC blend and Phargamites karka nanocomposite Compos Sci Technol 70 2010 1755 1761
38. B. Alexandre, S. Marais, S. Langevin, P. Mederic, and T. Aubry Nanocomposite-based polyamide 12/montmorillonite: relationships between structures and transport properties Desalination J 199 2006 164 166
39. 2 Front China 2 1 2007 104 109
40. H. Lee, and D.S. Kim Preparation and physical properties of wood/polypropylene/clay nanocomposites J Appl Polym Sci 111 6 2009 2769 2776
41. H. Alamri, and I.M. Low Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites Mater Des 42 2012 214 222
42. Y. Zhao, K. Wang, F. Zhu, P. Xue, and M. Jia Properties of poly (vinyl chloride)/wood flour/montmorillonite composites: effect of coupling agents and layered silicate Polym Degrad Stab 91 2006 2874 2883