Long term hygroscopic characteristics of polypropylene based hybrid composites with and without organo-modified clay

European Journal of Wood and Wood Products

Volumn 71, Issue 2, 2013, Pages 211-218

  Khanjanzadeh, Hossein ^a   Pirayesh, Hamidreza ^b   Salari, Ayoub ^a  

^a GORGAN UNIVERSITY OF AGRICULTURAL SCIENCES AND NATURAL RESOURCES   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

INJECTION MOLDING; NANOCOMPOSITES; ORGANOCLAY; PLASTIC RECYCLING; POLYMER MATRIX COMPOSITES; SCANNING ELECTRON MICROSCOPY; WATER ABSORPTION; WOOD PRODUCTS;

BARRIER PROPERTIES; BENEFICIAL EFFECTS; MALEATED POLYPROPYLENES; ORGANO-MODIFIED CLAYS; RECYCLED POLYPROPYLENE; THICKNESS SWELLING; WATER ABSORPTION BEHAVIOR; X-RAY DIFFRACTION METHOD;

POLYPROPYLENES;

MECHANICAL PROPERTIES; POLYPROPYLENE; RECYCLING; SCANNING ELECTRON MICROSCOPY; WOOD PRODUCTS; X RAY DIFFRACTION;

EID: 84880598970     PISSN: 00183768     EISSN: 1436736X     Source Type: Journal    
DOI: 10.1007/s00107-012-0661-4     Document Type: Article

References (47)

1. Abdolzadeh H, Doosthoseini K, Karimi AN, Enayati AA (2011) The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard. Eur J Wood Prod 69(1):3-10
2. Abdul Khalil HPS, Issam AM, Ahmad Shakri MT, Suriani R, Awang AY (2007) Conventional agro-composites from chemically modified fibres. Ind Crops Prod 26(3):315-323
3. Abdul Khalil HPS, Jawaid M, Abu Bakar A (2011) Woven hybrid composites: water absorption and thickness swelling behaviors. Bioresources 6(2):1043-1052
4. Adhikary KB, Pang S, Staiger MP (2008) Long-term moisture absorption and thickness swelling behaviour of recycled thermoplastics reinforced with Pinus radiata sawdust. Chem Eng J 142:190-198
5. Afrifah KA, Hickok RA, Matuana LM (2010) Polybutene as a matrix for wood plastic composites. Compos Sci Technol 70(1): 167-172
6. Alexandre B, Marais S, Langevin S, Mederic P, Aubry T (2006) Nanocomposite-based polyamide 12/montmorillonite: relationships between structures and transport properties. Desalination 199(1-3):164-166
7. Anuar H, Wan Busu WN, Ahnad SH, Rashid R (2008) Reinforced thermoplastic natural rubber hybrid composites with Hibiscus cannabinus, L and short glass fiber part I: processing parameters and tensile properties. Compos Mater 42(11):1075-1087
8. Arafa IM, Fares MM, Barham AS (2004) Sol-gel preparation and properties of interpenetrating, encapsulating and blend silicabased urea-formaldehyde hybrid composite materials. Eur Polym J 40:1477-1487
9. Ares A, Bouza R, Pardo SG, Abad MJ, Barral L (2010) Rheological, mechanical and thermal behavior of wood polymer composites based on recycled polypropylene. J Polym Environ 18:318-325
10. Ashori A, Nourbakhsh A (2011) Preparation and characterization of polypropylene/wood flour/nanoclay composites. Eur J Wood Prod 69(4):663-666
11. Ashori A, Sheshmani SH (2010) Hybrid composites made from recycled materials: moisture absorption and thickness swelling behavior. Bioresour Technol 101:4717-4720
12. ASTM D570 (2005) Standard test method for water absorption of plastics. American Society for Testing and Materials
13. Butylina S, Martikka O, Karki T (2010) Comparison of water absorption and mechanical properties of wood-plastic composites made from polypropylene and poly-lactic acid. Wood Mat Sci Eng 5:220-228
14. Butylina S, Martikka O, Kärki T (2011) Properties of wood fibrepolypropylene composites: effect of wood fibre source. Appl Compos Mater 18:101-111
15. Buyuksari U, Hiziroglu S, Akkilic H, Ayrilmis N (2012) Mechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneer. Compos B 43:110-114
16. Chan M, Lau K, Wong T, Ho M, Hui D (2011) Mechanism of reinforcement in a nanoclay/polymer composite. Compos Part B 42:1708-1712
17. Deka BK, Maji TK (2010) Effect of coupling agent and nanoclay on properties of HDPE, LDPE, PP, PVC blend and Phargamites karka nanocomposite. Compos Sci Technol 70(12):1755-1761
18. Deka BK, Maji TK (2011) Study on the properties of nanocomposite based on high density polyethylene, polypropylene, polyvinyl chloride and wood. Compos Part A 42:686-693
19. Doosthoseini K, Zarea-Hosseinabadi H (2010) Using Na + MMT nano-clay as secondary filler in plywood manufacturing. J Indian Acad Wood Sci 7(1-2):58-64
20. Espert A, Vilaplana F, Karlsson S (2004) Comparison of water absorption in natural cellulosic fibers from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Compos Part A 35(11):1267-1276
21. Ferreira JAM, Reis PNB, Costa JDM, Richardson BCH, Richardson MOW (2011) A study of the mechanical properties on polypropylene enhanced by surface treated nanoclays. Compos Part B 42:1366-1372
22. Gwon JG, Lee SY, Chun SJ, Doh GH, Kim JH (2010) Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites. Compos Part A 41:1491-1497
23. Hannequart JP (2004) Good practice guide on waste plastics recycling: a guide by and for local and regional authorities. Association of cities and regions for recycling (ACRR), Belgium
24. Haq M, Burgueno R, Mohanty AK, Misra M (2008) Hybrid bio-based composites from blends of unsaturated polyester and soybean oil reinforced with nanoclay and natural fibers. Compos Sci Technol 68:3344-3351
25. Hirunpraditkoona S, Garcia AN (2009) Kinetic study of vetiver grass powder filled polypropylene composites. Thermochim Acta 482:30-38
26. Khanjanzadeh H, Tabarsa T, Shakeri A (2012) Morphology, dimensional stability and mechanical properties of polypropylene-wood flour composites with and without nanoclay. J Reinf Plast Compos 31(5):341-350
27. Klyosov AA (2007) Wood-plastic composites. Wiley, Hoboken
28. Kord B, Hemmasi AH, Ghasemi I (2010) Properties of PP/wood flour/organomodified montmorillonite nanocomposites. Wood Sci Technol 45:111-119
29. Lee H, Kim DS (2009) Preparation and physical properties of wood/polypropylene/clay nanocomposites. J Appl Polym Sci 111(6): 2769-2776
30. Lei H, Du G, Pizzi A, Celzard A (2008) Influence of nanoclay on urea-formaldehyde resins for wood adhesives and its model. J Appl Polym Sci 109:2442-2451
31. Moucka R, Mravcakova M, Vilcakova J, Omastova M, Saha P (2011) Electromagnetic absorption efficiency of polypropylene/montmorillonite/ polypyrrole nanocomposites. Mater Des 32:2006-2011
32. Ndazi B, Tesha JV, Nisanda ETN (2006) Some opportunities and challenges of producing bio-composites from non-wood residues. J Mater Sci 41:6984-6990
33. Nourbakhsh A, Ashori A (2010) Particleboards made from waste paper treated with maleic anhydride. Waste Manage Res 28(1):51-55
34. 2 filled rice husk/polypropylene composites: physico-mechanical properties. Ind Crops Prod 33:183-187
35. Pettarin V, Frontini PM, Rodriguez Pita VJR, Lopes DM, Diaz VF (2008) Polyethylene/(organo-montmorillonite) composites modified with ethylene/methacrylic acid copolymer: morphology and mechanical properties. Compos Part A 39:1822-1828
36. Pirayesh H, Khanjanzadeh H, Salari A (2012) Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard. Compos Part B. http://dx.doi.org/10.1016/j.compositesb.2012.05. 008
37. Plastics Europe (2009) The compelling facts about plastics 2009. An analysis of European plastics production, demand and recovery for 2008. http://www.plasticseurope.org/Content/Default.asp?PageNameopenfile&DocRef- 20090930-001. Accessed 9 Nov 2009
38. Poletto M, Dettenborn J, Zeni M, Zattera AJ (2011) Characterization of composites based on expanded polystyrene wastes and wood flour. Waste Manage (Oxf) 31:779-784
39. Ravindra Reddy C, Pouyan Sardashti A, Simon LC (2010) Preparation and characterization of polypropylene-wheat straw-clay composites. Compos Sci Technol 70:1674-1680
40. 2. Front For China 2(1):104-109
41. Spinace MAS, Fermoseli KKG, De Paoli MA (2009) Recycled polypropylene reinforced with curaua fibers by extrusion. J Appl Polym Sci 112:3686-3694
42. Steckel V, Clemons CM, Thoemen H (2007) Effects of material parameters on the diffusion and sorption properties of woodflour/polypropylene composites. J Appl Polym Sci 103:752-763
43. Valente M, Sarasini F, Marra F, Tirillo J, Pulci G (2011) Hybrid recycled glass fiber/wood flour thermoplastic composites: manufacturing and mechanical characterization. Compos Part A 42:649-657
44. Wang L, Wang K, Chen L, Zhang Y, He C (2006) Preparation, morphology and thermal/mechanical properties of epoxy/clay nanoclay composite. Compos Part A 37:1890-1896
45. Wichman IS, Oladipo AB, Hermann I (1993) The influence of moisture on fibre/matrix adhesion for wood/ HDPE composites. In: Proceedings of 9th Annual ASM/ESD Advanced Composites Conference. ESD, the Engineering Society, Southfield, pp 265-276
46. Xu Y, Wu Q, Lei Y, Yao F (2010) Creep behavior of bagasse fiber reinforced polymer composites. Bioresour Technol 101(9): 3280-3286
47. Zahedsheijani R, Faezipour M, Tarmian A, Layeghi M, Yousefi H (2011) The effect of Na + montmorillonite (NaMMT) nanoclay on thermal properties of medium density fiberboard (MDF). Eur J Wood Prod 70:565-571